Protein refolding mediated by reverse micelles of Cibacron Blue F-3GA modified nonionic surfactant

An affinity-based reverse micellar system formulated with nonionic surfactant was applied to the refolding of denatured-reduced lysozyme. The nonionic surfactant of sorbitan trioleate (Span 85) was modified with Cibacron Blue F-3GA (CB) as an affinity surfactant (CB-Span 85) to form affinity-based reverse micelles in n-hexane. The water content of 15 was found optimal for lysozyme refolding in the reverse micellar system of 62.7 mmol/L Span 85 with coupled CB of 0.3 and 0.5 mmol/L. In addition, the operating conditions such as pH and the concentrations of urea and redox reagents were optimized. Under the optimized conditions, complete renaturation of lysozyme at 3-3.5 mg/mL was achieved, whereas dilution refolding in the bulk aqueous phase under the same conditions gave much lower activity recovery. Moreover, the secondary structure of the refolded lysozyme was found to be the same as the native lysozyme. Over 95% of the refolded lysozyme was recovered from CB-Span 85 reverse micelles by a stripping solution of 0.5 mol/L MgCl(2). Thus, the present system is advantageous over the conventional reverse micellar system formed with ionic surfactants in the ease of protein recovery.     

Extraction of monoclonal antibodies (IgG1) using anionic and anionic/nonionic reverse micelles

Purification schemes for antibody production based on affinity chromatography are trying to keep pace with increases in cell culture expression levels and many current research initiatives are focused on finding alternatives to chromatography for the purification of Monoclonal antibodies (MAbs). In this article, we have investigated an alternative separation technique based on liquid–liquid extraction called the reverse micellar extraction. We extracted MAb (IgG1) using reverse micelles of an anionic surfactant, sodium bis 2‐ethyl‐hexyl sulfosuccinate (AOT) and a combination of anionic (AOT) and nonionic surfactants (Brij‐30, Tween‐85, Span‐85) using isooctane as the solvent system. The extraction efficiency of IgG1 was studied by varying parameters, such as pH of the aqueous phase, cation concentration, and type and surfactant concentration. Using the AOT/Isooctane reverse micellar system, we could achieve good overall extraction of IgG1 (between 80 and 90%), but only 30% of the bioactivity of IgG1 could be recovered at the end of the extraction by using its binding to affinity chromatography columns as a surrogate measure of activity. As anionic surfactants were suspected as being one of the reasons for the reduced activity, we decided to combine a nonionic surfactant with an anionic surfactant and then study its effect on the extraction efficiency and bioactivity. The best results were obtained using an AOT/Brij‐30/Isooctane reverse micellar system, which gave an overall extraction above 90 and 59% overall activity recovery. An AOT/Tween‐85/Isooctane reverse micellar system gave an overall extraction of between 75 and 80% and overall activity recovery of around 40–45%. The results showed that the activity recovery of IgG1 can be significantly enhanced using different surfactant combination systems, and if the recovery of IgG1 can be further enhanced, the technique shows considerable promise for the downstream purification of MAbs. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Characterization of lipase in reversed micelles formulated with cibacron blue F-3GA modified span 85

Sorbitan trioleate (Span 85) modified by Cibacron Blue F-3GA (CB) was prepared and used as an affinity surfactant to formulate a reversed micellar system for Candida rugosa lipase (CRL) solubilization. The system was characterized and evaluated by employing CRL-catalyzed hydrolysis of olive oil as a model reaction. The micellar hydrodynamic radius results reflected, to some extent, the redistribution of surfactant and water after enzyme addition, and the correlation between surfactant formulation, water content (W0), micellar size, and enzyme activity. An adequate modification density of CB was found to be important for the reversed micelles to retain enough hydration capacity and achieve high enzyme activity. Compared with the results in AOT-based reversed micelles, CRL in this micellar system exhibited a different activity behavior versus W0. The optimal pH and temperature of the encapsulated lipase remained unchanged, but the apparent activity was significantly higher than that of the native enzyme in bulk solution. Kinetic studies indicated that the encapsulated lipase in the reversed micelles of CB-formulated Span 85 followed the Michaelis-Menten equation. The Michaelis constant was found to decrease with increasing surfactant concentration, suggesting an increase of the enzyme affinity for the substrate. Stability of the lipase in the reversed micelles was negatively correlated to W0.     

Structures similar to lipid emulsions and liposomes. Dipalmitoylphosphatidylcholine,cholesterol, Tween 20–Span 20 or Tween 80–Span 80 in aqueous media

In the present work, we show that we obtained nanometric structures made of water, 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), cholesterol (Chol), and a mixture of ethoxylated and non-ethoxylated sorbitan fatty acid esters (Tween 20, Span 20, Tween 80, and Span 80) by mixing all of them near the cloud point temperature (cp) of the ethoxylated surfactant. The influence that the constituents had on the size of the particle was determined by a pseudo-ternary phase diagram of water/Tween–Span/DPPC–Chol; the colloidal particles obtained were studied by differential scanning calorimetry, confocal fluorescence microscopy, scanning electron microscopy, and atomic force microscopy. These studies were made for all the systems with at least 23 d of colloidal stability. The most stable system was obtained with the Tween 80–Span 80 pair, behaving as a typical suspension for 48 d; this system was made of water, Tween 80–Span 80 (80:20), DPPC–Chol (95:5) in a corresponding molar ratio of 48:37:100:10. The colloidal particles obtained were a kind of emulsion and liposome structures. The second stable system was obtained with the same mixture, but in a molar ratio of 8:6:9:0, its structure was also a kind of emulsion particles. In both systems and in other less stable ones, the “emulsion particle” was completely new, it structurally corresponds to a nucleus of mixed micelles surrounded by at least one bilayer of DPPC.     

Reactivity of trypsin in reverse micelles: neglected role of aggregate size compared to water-pool components

The catalytic efficiency of trypsin was estimated in cationic reverse micelles as a function of the concentration of water-pool components and aggregate size to determine their independent influence on enzyme activity. The variation in the aggregate size/water-pool size was achieved by changing both the W0 (mole ratio of water to surfactant) and the headgroup area of surfactant through introduction of hydroxyethyl groups at the polar head. The local molar concentrations of water present inside the water-pool ([H2O]wp) of different cationic reverse micelles across varying W0 was estimated using a modified phenyl cation-trapping protocol. The [H2O]wp in cationic reverse micelles (surfactant/isooctane/n-hexanol/water) increases with W0 and attains the molarity of normal water beyond W0=40 irrespective of the nature of headgroup. Concurrently, the catalytic activity of trypsin compartmentalized within the water-pool increases with the increase in [H2O]wp upto an optimal W0=40 in organized solutions of any surfactant. The aggregate size (determined by static light scattering) also increases expectedly with W0 and noticeably with the area of the surfactant headgroup at similar W0. Since the enzyme activity rises both with the increase in water-pool size and [H2O]wp, trypsin's efficiency was compared with these two parameters across reverse micelles of varying surfactant headgroup size at similar W0 to determine their probable independent influence in regulating the enzyme activity. Noticeably, the efficiency of trypsin rises two to ninefold in spite of the [H2O]wp being distinctly lower in case of hydroxyethyl group substituted surfactants compared to cetyltrimethylammonium bromide w/o microemulsions at similar W0. Thus, the influence of the aggregate size possibly plays an important role alongwith the [H2O]wp in modulating the enzyme activity.     

Purification of lysozyme by affinity-based reversed micellar two-phase extraction

A dye-affinity reversed micellar system was used for lysozyme purification from a crude solution of chicken egg white. The dye-affinity reversed micelles consisted of Cibacron Blue F-3GA (CB; 0.1 mM) modified lecithin (50 g/l) in n-hexane. Starting with a crude egg white solution containing lysozyme of 0.0381 mg/mg protein, lysozyme purity was increased by 16 to 20 times, reached 0.62 to 0.76 mg/mg protein. The affinity micellar system was recycled and used three times. Addition of polyoxyethylene (20) sorbitan trioleate (Tween 85) as a cosurfactant could increase the capacity of the affinity-based reversed micelles. A lysozyme recovery yield of over 70% was obtained at a forward aqueous phase pH of 9.16 using the reversed micelles additionally containing 20 g/l of Tween 85.     

Photosynthetic activity of cyanobacteria in water-in-oil microemulsions

The solubilization and the photosynthetic activity of cyanobacteria (Anabaena variabilis) in water-in-oil microemulsions consisting of (Tween85/Span80)/hexadecane/water is investigated. Transparent and stable solutions containing up to 10(8) cells/mL could be obtained. The physical state and stability of the cells in the microemulsion, as evidenced from optical and electron microscopy, is dependent upon the physical parameters of the system, and in particular on the hydrophylic-lypophilic balance (HLB) of the surfactant system. Conditions could be found, under which the cells in the microemulsion system display photosynthetic activity This was judged by measuring polarographically the oxygen evolution and by studying the photosynthetic activity in the presence of specific inhinbitors.     

Higher order structure of Mucor miehei lipase and micelle size in cetyltrimethylammonium bromide reverse micellar system

The higher order structure of Mucor miehei lipase and micelle size in a cationic cetyltrimethylammonium bromide (CTAB) reverse micellar system was investigated. Circular dichroic (CD) measurement revealed that the lipase far-UV CD spectra changed markedly, going from buffer solution to the reverse micellar solution, and were very similar for any organic solvent used. The ellipticity of the solubilized lipase in the far-UV region markedly decreased with increasing water content (W(0): molar ratio of water to CTAB), indicating that the secondary structure of lipase changed with the water content. The linear correlation between the W(0) and the micelle size was obtained by measuring dynamic light scattering. From the linear correlation between the micelle size and W(0), the higher order structure of the solubilized lipase appears to be affected directly by the micellar interface. The species and concentration of alcohol as a cosurfactant had an inferior effect on lipase structure. Especially, at ratios of 1-pentanol to CTAB of less than 8, the secondary and tertiary structures of lipase were preserved in the reverse micelles. The CTAB concentration had little effect on the lipase structure in the micelles. The catalytic activity of the lipase solubilized in the CTAB reverse micelles increased with increasing the W(0).     

Reverse micelles as a versatile medium for the study of lactate dehydrogenase in vitro

Rabbit muscle lactate dehydrogenase has been solubilized in cationic reverse micelles of cetyltrimethyl ammonium bromide (CTAB) and isooctane-chloroform (1:1, V/V). The activity of the enzyme was notably affected by the change in water pool, pH, and concentration of the surfactant. Lactate dehydrogenase showed its full activity in this reverse micellar system in non-aqueous solvent under specific conditions at a Wo value of 30.55, pH 7.0, and 100 mM CTAB in comparison to the activity measured in aqueous system under optimum conditions. These results indicate that even the large and complex enzymes (M.W. hundred thousand and four subunits) can be solubilized in apolar solvents where they may retain their conformational integrity and oligomericity, i.e., optimum subunit-subunit interaction with maintenance of full activity.     

Deactivation and conformational changes of cutinase in reverse micelles

Deactivation data and fluorescence intensity changes were used to probe functional and structural stability of cutinase in reverse micelles. A fast deactivation of cutinase in anionic (AOT) reverse micelles occurs due to a reversible denaturation process. The deactivation and denaturation of cutinase is slower in small cationic (CTAB/1-hexanol) reverse micelles and does not occur when the size of the cationic reverse micellar water-pool is larger than cutinase. In both systems, activity loss and denaturation are coupled processes showing the same trend with time. Denaturation is probably caused by the interaction between the enzyme and the surfactant interface of the reversed micelle. When the size of the empty reversed micelle water-pool is smaller than cutinase (at W0 5, with W0 being the water:surfactant concentration ratio) a three-state model describes denaturation and deactivation with an intermediate conformational state existing on the path from native to denaturated cutinase. This intermediate was clearly detected by an increase in activity and shows only minor conformational changes relative to the native state. At W0 20, the size of the empty water-pool was larger than cutinase and the data was well described by a two-state model for both anionic and cationic reverse micelles. For AOT reverse micelles at W0 20, the intermediate state became a transient state and the deactivation and denaturation were described by a two-state model in which only native and denaturated cutinase were present. For CTAB/1-hexanol reverse micelles at W0 20, the native cutinase was in equilibrium with an intermediate state, which did not suffer denaturation. 1-Hexanol showed a stabilizing effect on cutinase in reverse micelles, contributing to the higher stabilities observed in the cationic CTAB/1-hexanol reverse micelles. Copyright 1998 John Wiley & Sons, Inc.     

Characteristics of phospholipase D in reverse micelles of Triton X-100 and phosphatidylcholine in diethyl ether

Summary Phospholipase D, from cabbage, is active in reverse micelles formed from its substrate phosphatidylcholine and Triton X-100 in diethyl ether. The activity is optimum at w₀=12.5. The increase of the molar ratio of Triton X-100/substrate from 1:4 to 2:1 results in an activity decrease by 25 %. At 136 mM Triton X-100 the K_M value in reverse micelles is 136 mM, whereas it is 0.40 mM in the aqueous system containing SDS.     

Catalytic activity of lignin peroxidase and partition of veratryl alcohol in AOT/isooctane/toluene/water reverse micelles

The activity of lignin peroxidase (LiP) and the partition of its optimum substrate veratryl alcohol (VA) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane/toluene/water reverse micelles were studied in this paper to understand the microheterogeneous effect of the medium on the catalytic properties of LiP hosted in the reverse micelle. Results showed that LiP from Phanerochaete chrysosporium could express its activity in the reverse micelles, but its activity depended, to a great extent, on the composition of the reverse micelles. Optimum activity occurred at a molar ratio of water to AOT (ω₀) of 11, a pH value of 3.6, and a volume ratio of isooctane to toluene of 7–9. Under optimum conditions, the half-life of LiP was circa 12 h. The dependence of LiP activity on the volume fraction of water in the medium (θ), at a constant ω₀ value of 11, indicated that VA was mainly solubilized in the pseudophase of the reverse micelle. Based on the pseudobiphasic model and the corresponding kinetic method, a linear line can be obtained in a plot of apparent Michaelis constant of VA vs θ, and the partition coefficient of VA between the pseudophase and the organic solvent phase was determined to be 35.8, which was higher than that (22.3) between bulk water and the corresponding mixed organic solvent. H₂O₂ inhibited LiP at concentrations higher than 80 μM; this concentration value seems to be different from that in aqueous solution (about 3 mM). The differences mentioned above should be ascribed to the microheterogeneity and the interface of the AOT reverse micelle.     

Ozonation of lysozyme in the presence of oleate in reverse micelles of sodium di-2-ethylhexylsulfosuccinate.

Ozone is shown to react with lysozyme in reverse micelles formed by 0.1 M sodium di-2-ethylhexylsulfosuccinate and 1.2-3 M water (pH 7.4) in isooctane solvent. The reaction of ozone is assessed by the oxidation of tryptophan residues in the protein to N-formylkynurenine. Cosolubilization of oleate in lysozyme-containing reverse micellar solutions at concentrations of 0.5-10 mM results in a progressive inhibition (19% to 82%) of the oxidation of tryptophan residues with a concentration for 50% inhibition around 2 mM. At this concentration of oleate, the magnitude of inhibition is independent of the micelle size and concentration, the overall interfacial area of reverse micelles, and the amount of ozone employed. These findings are discussed in terms of competitive reactions of ozone with unsaturated fatty acids and proteins in the lung lining fluid and in biological membranes.     

Enhanced activity of Mucor javanicus lipase in polyoxyethylene sorbitan trioleate containing microemulsion-based organogels

The efficacy of polyoxyethylene sorbitan trioleate (Tween 85) addition on the activity of Mucor javanicus lipase was investigated in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) microemulsion-based organogels (MBGs). Gelatin was used as the gelling component of the MBGs. The maximal reaction rate was obtained at an AOT:Tween 85 molar ratio of 10:1. Under a fixed molar ratio system of AOT:Tween 85 = 10:1, the reaction rate also attained a maximum at a W_G (=[H₂O]/[AOT + Tween 85] in MBG phase) value of 100 and an AOT concentration of 150 mM. The reaction proceeded under a reaction-controlled regime, and the reaction rate for the AOT/Tween 85 mixed system was about 2-fold higher than that for the AOT single system. The lipase activity was well maintained for 10 days and recovered by contacting the MBGs with concentrated amphiphile solutions.     

Spectral and catalytic properties of cytochrome oxidase in organic solvents

Isolated bovine heart cytochrome oxidase has been extracted into n-hexane, probably in reverse micelles, by the use of asolectin and calcium. The diluted extracts are composed of particles with the hydrodynamic radius of 42 nm. Spectral characteristics of the extracted oxidase are similar to those in aqueous solutions. At the high molar ratio of water to phospholipid (W0 = 8) in an organic solvent both cytochrome a and a3 are reducible and oxygen uptake is observed. However, at low W0 (W0 = 1.8) the rate of cytochrome a reduction is decreased and reduction of cytochrome a3 is inhibited.     

Polarographic measurement of oxygen uptake using lipoxygenase in reverse micelles

Lipoxygenase-catalyzed linoleic acid peroxidation was chosen as a model system to study the applicability of oxygraphy to monitor the oxygen uptake in organic solvents containing reverse micelles. Care was taken to control the oxygen back transfer from the atmosphere to the sample micellar solution, resulting in a significant improvement of electrode response. Under these conditions, lipoxygenase activity was linear up to 100 mug of enzyme. Given the quality of the calibration curve and the good correlation between lipoxygenase and ascorbate oxidase, the described technique is proposed as an alternative method for determining lipoxygenase activity in reverse micelles. The reliability of this technique was confirmed by the good agreement between polarography and classic spectrophotometry in kinetic studies. Preliminary experiments carried out on soybean cells solubilized in a Tween 85-isopropylpalmitate system demonstrated that a light-dependent oxygen uptake can be measured. The authors propose that the Clark-type electrode be employed to study both the activity of oxidasic enzymes in reverse micelles and cell viability and physiology in organic solvents.     

Extraction of bovine serum albumin using nanoparticulate reverse micelles

The extraction of a relatively large molecular weight protein, bovine serum albumin (BSA), using nano-sized reverse micelles of nonionic surfactant polyoxyethylene p-t-octylphenol (Triton-X-100) is attempted for the first time. Suitability of reverse micelles of anionic surfactant sodium bis (2-ethyl hexyl) sulfosuccinate (AOT) and Triton-X-100/AOT mixture in organic solvent toluene for BSA extraction is also investigated. Although, the size of the Triton-X-100 reverse micelle in toluene is large enough to host BSA molecule in the hydraulic core, the overall extraction efficiency is found to be low, which may be due to lack of strong driving force. AOT/toluene system resulted in complete forward extraction at aqueous pH 5.5 and a surfactant concentration of 160 mM. The back extraction with aqueous phase (pH 5.5) resulted in 100% extraction of BSA from the organic phase. The addition of Triton-X-100 to AOT reduced the extraction efficiency of AOT reverse micelles, which may be attributed to reduced hydrophobic interaction. The circular dichroism (CD) spectrum of BSA extracted using AOT/toluene reverse micelles indicated the structural stability of the protein extracted.     

Stability and Enzymatic Studies of Glucose Dehydrogenase from the Archaeon Haloferax mediterranei in reverse micelles

Reverse micelles were used as a cytoplasmic model to study the kinetics of an extreme halophilic enzyme such as the recombinant glucose dehydrogenase from the Archaeon Haloferax mediterranei. This enzyme was solubilized in reverse micelles of hexadecyltrimethylammoniumbromide in cyclohexane, with 1-butanol as co-surfactant. Glucose dehydrogenase retained its catalytic properties in this organic medium, showing good stability at low water content, even at low salt concentration (125 mM NaCl). The dependence of the enzymatic activity on the molar water surfactant ratio (w₀=[H₂O]/[surfactant]) increased with rising water content. Surprisingly, the activity of this extreme halophilic enzyme did not depend on the salt concentration in reverse micelles. The kinetic of the enzymatic oxidation of β-D-glucose to D-glucono-1,5-lactone using NADP⁺ as coenzyme for the glucose dehydrogenase from Haloferax mediterranei was also studied in the reverse micellar system.     

Permeation Studies of Indomethacin from Different Emulsions for Nasal Delivery and Their Possible Anti-Inflammatory Effects

The purpose of this research was to develop an emulsion formulation of indomethacin (IND) suitable for nasal delivery. IND was incorporated into the oil phases of oil in water (O/W) and water in oil (W/O) emulsions. For this purpose, different emulsifying agents (Tween 80, Span 80 and Brij 58) were used in two emulsion formulations. When the effects of several synthetic membranes (nylon, cellulose, cellulose nitrate) were compared with the sheep nasal mucosa, the cellulose membrane and sheep nasal mucosa showed similar permeation properties for O/W emulsion (P > 0.05). To examine the absorption characteristics of IND, the anti-inflammatory properties of intravenous solution of IND, intranasal O/W emulsions of IND (with or without enhancers) and intranasal solution of IND (IND-Sol) were investigated in rats with carrageenan-induced paw edema. When citric acid was added to the nasal emulsion, the anti-inflammatory activity was similar to that of intravenous solution (P > 0.05). Finally, it was concluded that, intranasal administration of IND emulsion with citric acid may be considered as an alternative to intravenous and per oral administrations of IND to overcome their adverse effects.     

Influence of reverse micellar environments on the fluorescence emission properties of tryptophan octyl ester

A number of recent studies have presented perspectives on the hydrophobic fluorescence probe tryptophan octyl ester (TOE). This molecule has attracted notable attention as a suitable model for the natural fluorophore tryptophan, in case of membrane proteins. We report here, for the first time, the fluorescence emission behaviour of TOE in reverse micelles of aerosol-OT (AOT) in n-heptane, containing different amounts of water. Relevant studies in representative homogeneous solvent media are also included for comparison. The fluorescence emission parameters (especially emission maximum, relative intensity, and anisotropy) of TOE are found to exhibit significant variation upon changes in the water/surfactant molar ratio (w(0)) of the reverse micelles. Fluorescence decay studies on TOE which we have also performed, indicate biexponential decay kinetics in reverse micelles as well as in homogeneous solvent media. The implications of these findings are examined in relation to the potentialities of TOE as a novel fluorescence probe for membrane proteins present in water restricted environments prevailing at the interfaces of biomembranes (for which reverse micelles serve as ideal model systems).