MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

The effects of manipulation of sedimentary iron and organic matter on sediment biogeochemistry and seagrasses in a subtropical carbonate environment

The microbial metabolism of organic matter (OM) in seagrass beds can create sulfidic conditions detrimental to seagrass growth; iron (Fe) potentially has ameliorating effects through titration of the sulfides and the precipitation of iron-sulfide minerals into the sediment. In this study, the biogeochemical effects of Fe availability and its interplay with sulfur and OM on sulfide toxicity, phosphorous (P) availability, seagrass growth and community structure were tested. The availability of Fe and OM was manipulated in a 2 × 2 factorial experiment arranged in a Latin square, with four replicates per treatment. The treatments included the addition of Fe, the addition of OM, the addition of both Fe and OM as well as no addition. The experiment was conducted in an oligotrophic, iron-deficient seagrass bed. Fe had an 84.5% retention efficiency in the sediments with the concentration of Fe increasing in the seagrass leaves over the course of the experiment. Porewater chemistry was significantly altered with a dramatic decrease in sulfide levels in Fe addition plots while sulfide levels increased in the OM addition treatments. Phosphorus increased in seagrass leaves collected in the Fe addition plots. Decreased sulfide stress was evidenced by heavier δ³⁴S in leaves and rhizomes from plots to which Fe was added. The OM addition negatively affected seagrass growth but increased P availability; the reduced sulfide stress in Fe added plots resulted in elevated productivity. Fe availability may be an important determinant of the impact that OM has on seagrass vitality in carbonate sediments vegetated with seagrasses.     

EPR properties of mixed-valent μ-oxo and μ-hydroxo dinuclear iron complexes produced by radiolytic reduction at 77 K

 Radiolytic reduction at 77 K of oxo-/hydroxo-bridged dinuclear iron(III) complexes in frozen solutions forms kinetically stabilized, mixed-valent species in high yields that model the mixed-valent sites of non-heme, diiron proteins. The mixed-valent species trapped at 77 K retain ligation geometry similar to the initial diferric clusters. The shapes of the mixed-valent EPR signals depend strongly on the bridging ligands. Spectra of the Fe(II)OFe(III) species reveal an S=1/2 ground state with small g-anisotropy as characterized by the uniaxial component (g _z –g _av /2<0.03) observable at temperatures as high as ∼100 K. In contrast, hydroxo-bridged mixed-valent species are characterized by large g-anisotropy (g _z –g _av /2>0.03) and are observable only below 30 K. Annealing at higher temperatures causes structural relaxation and changes in the EPR characteristics. EPR spectral properties allow the oxo- and hydroxo-bridged, mixed-valent diiron centers to be distinguished from each other and can help characterize the structure of mixed-valent centers in proteins. Received: 27 June 1998 / Accepted: 25 February 1999     

The functioning of cytochrome b in the electron transport to fumarate in Propionibacterium freudenreichii and Propionibacterium pentosaceum

Fumarase-free electron particles from Propionibacterium freudenreichii and P. pentosaceum were prepared by discontinuous sucrose gradient centrifugation, and the influence of 2-n-heptyl-4-hydroxy-quinoline-N-oxide (HQNO) and ultraviolet irradiation on the reduction of menaquinone and cytochrome b with l-lactate or glycerol-3-phosphate and the reoxidation by fumarate was studied. In the presence of HQNO the steady state reduction level of menaquinone during fumarate reduction was increased whereas the steady state reduction level of cytochrome b was decreased as compared with the reduction levels measured in the absence of HQNO. The steady state reduction level of menaquinone during electron transport to fumarate was not influenced by ultraviolet irradiation and the steady state reduction level of cytochrome b was decreased at increasing irradiation times. The data indicate that cytochrome b is involved in the electron transport to fumarate.Abbreviations HQNO 2-n-heptyl-4-hydroxyquinoline-N-oxide - NQNO 2-n-nonyl-4-hydroxyquinoline-N-oxide Visiting Professor at the Biological Laboratory     

Decision Support through Mass and Energy Flow Management in the Vehicle-Refinishing Sector

In the past few decades, major advances in environmental protection within the coating application industry have been made. In spite of this technological progress, approximately 50% of industrial-solvent emissions still come from the paint-application sector. The advances made in reducing emissions for plants requiring licensing have unfortunately had no influence on the environmental efforts of smaller companies. Solvent-reduced painting systems, such as high-solid paints, water-based coating, and powder coating have not been able to achieve acceptance, nor have innovative application technologies. The principal arguments against a conversion to these ecologically more favorable alternatives were related to cost and quality.
Recently, the EU Solvent Directive (1999/13/EC) went into effect, aiming to significantly reduce industrial-solvent emissions. Up until this point, however, instruments enabling smaller companies to determine their solvent emissions and to simultaneously develop process-improvement potentials while keeping costs in mind have been missing.
Using the mass and energy flow-management approach, cost structures and environmental benefits can be made transparent to the entrepreneur. The primary result of the research projects presented here is the computer-based mass and energy flow model called the individual computer-aided mass and energy flow model for the vehicle-refinishing sector (IMPROVE). It can be used as a detailed business-consultancy tool. Based upon this, practical guidelines were developed for easy orientation and activity planning. They can be used by companies to help them fulfill the requirements of environmental legislation and to display the benefits that can be achieved by various emission-reduction measures.     

A comparison of three noise reduction procedures applied to bird vocal signals

ABSTRACT.   Recordings of avian vocal signals in natural habitats include ambient noise. Often this background noise corrupts across all frequencies and is of substantial amplitude. Reducing this ambient noise to prepare vocal signals for playback stimuli or to remove habitat-specific noise signatures prior to analyzing a signal's acoustic characteristics can be useful. We conducted experimental evaluations of three noise reduction procedures to determine their effectiveness. We embedded two bird vocalizations ("clean" signals) in four kinds of natural noise, resulting in eight noise-signal combinations. We then applied three noise reduction procedures (Noise Profile, Band Pass, and Noise Estimate) to each of the embedded signals and compared the recovered signals to the original (clean) signals. Noise Profile filtering was effective in reducing noise and returning fairly high-quality signals from even severe levels of masking noise. The other two noise reduction procedures did not perform as well. For the two most corrupting maskers, however, Noise Profile filtering also altered the signal properties by reducing signal amplitude at those frequencies containing high levels of noise. Apart from this loss of amplitude, the quantitative features of the filtered signals were similar to those of the original model sounds. We conclude that Noise Profile filtering produces good results for cases where noise is approximately constant over the signal duration and the signal intensity exceeds noise intensity over the frequencies of interest.