Nitrogen fertigation of greenhouse-grown cucumber

Summary This greenhouse study investigated the response of trickle-irrigated cucumber (Cucumis sativa cv. ‘Petita’) to three N levels applied with every irrigation via the irrigation stream. The plants were grown in pots filled with 12 kg of soil. Water containing 5.8, 11.8, or 17.8 mmol N/l, and uniformly supplied with 2.0 and 3.9 mmol/l of P and K, respectively, was applied two to three times daily. In all treatments of 0.3 leaching fraction was allowed. The resulting total N applications were 15.7, 31., and 47.2 g N/plant. The total amount of water applied was 1851/plant. Total N and NO₃-N, in lajinae and petioles, increased with increasing N level whereas P and K in generated decreased. Although different NO₃/NH₄ ratios in the treatments may have influeced the response to N, it could be concluded that the highest yield was obtained with 11.8 mmol N/1 due to increased number of fruit. In the root volume of this treatment the NO₃-N concentration in the soil solution was aroun 7 mmol/1 for most of the growing season. The dry matter concentration of fruits was not affected by the N levels. It was concluded that 11.8 mmol N/1 applied with every irrigation via the irrigation stream is adequate to cover the needs of greenhous-grown cucumber for higher yield (9.42 kg/plant over a harvesting period of 93 days).     

Enzyme activities in a clay-loam soil amended with various crop residues

Summary Amylase, dehydrogenase, arylsulphatase and phosphatases activities were measured in a clay-loam soil amended with seven different crop residues. All enzyme activities, except phosphomonoesterase, were generally higher in the derived soil samples than in the original soil. Addition of tobacco and sunflower residues caused an increase on most of the enzyme activities while tomato residues increased only the amylase and phosphodiesterase activities. As the enzyme activities were positively correlated to each other, a common source of the enzymes is suggested even though the coefficients of correlation demonstrate that only a low percentage of the variability can be ascribed to the interactions among enzyme activities.     

Enumeration of denitrifying microbial populations in turf

Summary Denitrifer populations of a silt and silt loam soil under a Kentucky bluegrass turf were enumerated using the most probable number (MPN) procedure. The influence of soil texture, soil depth, soil moisture, and additions of nitrate fertilizer on denitrifier populations were determined. Saturated soil conditions increased denitrifier populations 87-fold in the silt soil and 121-fold in the silt loam soil. Denitrifier populations did not differ significantly between soil depths and additions of fertilizer nitrate did not influence populations.     

Gradients in maize roots: local elongation and pH

The elongation rate, the gradient of the local elongation rate and the surface pH of maize roots were measured over 12 h. A data bank was constituted by storing these values. By sorting these results on the basis of different elongation rates, different classes of root were obtained. Two classes were chosen: the low-growth roots and the high-growth roots. The mean growth of these two root classes was stable with time and differed significantly from one another. The surface pH of the elongation zone was the same for the roots of these two classes, but the roots selected for their higher growth rate had a larger acid efflux in this zone.     

The Pressurized Porous Surface Model: An improved tool to study bacterial behavior under a wide range of environmentally relevant matric potentials

To study bacterial behavior under varying hydration conditions similar to surface soil, we have developed a system called the Pressurized Porous Surface Model (PPSM). Thin liquid films created by imposing a matric potential of − 0.4 MPa impact gene expression and colony development in Pseudomonas putida.     

Spatio‐temporal variation of salt marsh seedling establishment in relation to the abiotic and biotic environment

Contrary to our expectations, soil salinity and moisture explained little of the spatial variation in plant establishment in the upper intertidal marsh of three southern California wetlands, but did explain the timing of germination. Seedlings of 27 species were identified in 1996 and 1997. The seedlings were abundant (maximum densities of 2143/m² in 1996 and 1819/m² in 1997) and predominantly annual species. CCAs quantified the spatial variation in seedling density that could be explained by three groups of predictor variables: (1) perennial plant cover, elevation and soil texture (16% of variation), (2) wetland identity (14% of variation) and (3) surface soil salinity and moisture (2% of variation). Increasing the spatial scale of analysis changed the variables that best predicted patterns of species densities. Timing of germination depended on surface soil salinity and, to a lesser extent, soil moisture. Germination occurred after salinity had dropped below a threshold or, in some cases, after moisture had increased above a critical level. Between 32% and 92% of the seedlings were exotic and most of these occurred at lower soil salinity than native species. However, Parapholis incurva and Mesembryanthemum nodiflorum were found in the same environments as the native species. In 1997, the year of a strong El Niño/Southern Oscillation event with high rainfall and sea levels, the elevation distribution of species narrowed and densities of P. incurva and other exotic species decreased but densities of native and rare species did not change. The ‘regeneration niche’ of wetland plant communities includes the effects of multiple abiotic and biotic factors on both the spatial and temporal variations in plant establishment.     

Resprouting in the Mediterranean‐type shrub Erica australis afffected by soil resource availability

Abstract. Soil resource availability may affect plant regeneration by resprouting in disturbed environments directly, by affecting plant growth rates, or indirectly by determining allocation to storage in the resprouting organs. Allocation to storage may be higher in stressful, low resource‐supply soils, but under such conditions plant growth rates may be lower. These factors could act in opposite directions leading to poorly known effects on resprouting. This paper analyses the role played by soil resources in the production and growth of resprouts after removal of above‐ground plant tissues in the Mediterranean shrub Erica australis. At 13 sites, differing in substrate, we cut the base of the stems of six plants of E. australis and allowed them to resprout and grow for two years. Soils were chemically analysed and plant water potential measured during the summer at all sites to characterize soil resource availability. We used stepwise regression analysis to determine the relationships between the resprouting response [mean site values of the number of resprouts (RN), maximum length (RML) and biomass (RB)] and soil nutrient content and plant water potential at each site. During the first two years of resprouting there were statistically significant differences among sites in the variables characterizing the resprouting response. RML was always different among sites and had little relationship with lignotuber area. RN was less different among sites and was always positively correlated with lignotuber area. RB was different among sites after the two years of growth. During the first months of resprouting, RN and RML were highly and positively related to the water status of the plant during summer. At later dates soil fertility variables came into play, explaining significant amounts of variance of the resprouting variables. Soil extractable cations content was the main variable accounting for RML and RB. Our results indicate that resprout growth of E. australis is positively affected by high water availability at the beginning of the resprouting response and negatively so by high soil extractable cation content at later periods. Some of these factors had previously shown to be related, with an opposite sign, to the development of a relatively larger lignotuber. Indeed, RML and RB measured in the second year of resprouting were significantly and negatively correlated with some indices of biomass allocation to the lignotuber at each site. This indicates that sites favouring allocation to the resprouting organ may not favour resprout growth.     

Radioiodinated surface proteins of rabbit trophectoderm cells

Summary We have previously used surface iodination to discriminate between the protein patterns of epithelial cell surfaces in uteri of rabbits receptive (Day 6.5) or nonreceptive (Day 4) to nidation (Ricketts et al. 1984). In this paper, we describe application of the same technique to the trophoblastic surface of rabbit blastocysts collected on the same days of pregnancy. Analysis of labelled proteins by polyacrylamide-gel electrophoresis under denaturing conditions did not reveal qualitative differences between the two days of pregnancy. Scanning densitometry was used to quantitate the area under each protein peak on an autoradiogram; these areas were used as variables in statistical analysis of the protein pattern of individual animals. Quantitative differences between the protein patterns of the two surfaces were detected by canonical variate analysis of the pattern of relative areas of labelled protein peaks. In proteins separated on 7.5% gels, this statistical analysis correctly assigned blastocysts from 8 out of 10 animals to one of two groups according to day of pregnancy. The discrimination was not statistically significant, however, in protein patterns on 12.5% gels, used to give better separation in the lower range of molecular weights. The same analysis in the uterus unequivocally separated the surface iodination patterns from these same days of pregnancy. Thus the changes detected by surface iodination appear to be less pronounced on the trophectoderm than on the uterine epithelium in relation to the time of ovoimplantation.     

Tuning cellular responses to BMP-2 with material surfaces

Bone morphogenetic protein 2 (BMP-2) has been known for decades as a strong osteoinductive factor and for clinical applications is combined solely with collagen as carrier material. The growing concerns regarding side effects and the importance of BMP-2 in several developmental and physiological processes have raised the need to improve the design of materials by controlling BMP-2 presentation. Inspired by the natural cell environment, new material surfaces have been engineered and tailored to provide both physical and chemical cues that regulate BMP-2 activity. Here we describe surfaces designed to present BMP-2 to cells in a spatially and temporally controlled manner. This is achieved by trapping BMP-2 using physicochemical interactions, either covalently grafted or combined with other extracellular matrix components. In the near future, we anticipate that material science and biology will integrate and further develop tools for in vitro studies and potentially bring some of them toward in vivo applications.     

Zosteric acid and salicylic acid bound to a low density polyethylene surface successfully control bacterial biofilm formation

The active moieties of the anti-biofilm natural compounds zosteric (ZA) and salicylic (SA) acids have been covalently immobilized on a low density polyethylene (LDPE) surface. The grafting procedure provided new non-toxic eco-friendly materials (LDPE-CA and LDPE-SA) with anti-biofilm properties superior to the conventional biocide-based approaches and with features suitable for applications in challenging fields where the use of antimicrobial agents is limited. Microbiological investigation proved that LDPE-CA and LDPE-SA: (1) reduced Escherichia coli biofilm biomass by up to 61% with a mechanism that did not affect bacterial viability; (2) significantly affected biofilm morphology, decreasing biofilm thickness, roughness, substratum coverage, cell and matrix polysaccharide bio-volumes by >80% and increasing the surface to bio-volume ratio; (3) made the biofilm more susceptible to ampicillin and ethanol. Since no molecules were leached from the surface, they remained constantly effective and below the lethal level; therefore, the risk of inducing resistance was minimized.