Optimization of two-phase thermophilic anaerobic digestion of biowaste for hydrogen and methane production through reject water recirculation

The optimization of a two-phase thermophilic anaerobic process treating biowaste for hydrogen and methane production was carried out at pilot scale using two stirred reactors (CSTRs) and without any physical/chemical pre-treatment of inoculum. During the experiment the hydrogen production at low hydraulic retention time (3d) was tested, both with and without reject water recirculation and at two organic loading rate (16 and 21 kgTVS/m³d). The better yields were obtained with recirculation where the pH reached an optimal value (5.5) thanks to the buffering capacity of the recycle stream. The specific gas production of the first reactor was 51 l/kgVS_fed and H₂ content in biogas 37%. The mixture of gas obtained from the two reactors met the standards for the biohythane mix only when lower loading rate were applied to the first reactor, with a composition of 6.7% H₂, 40.1% CO₂ and 52.3% CH₄ the overall SGP being 0.78 m³/kgVS_fed.     

Integrative Biological Hydrogen Production: An Overview

Biological hydrogen (H₂) production by dark and photo-fermentative organisms is a promising area of research for generating bioenergy. A large number of organisms have been widely studied for producing H₂ from diverse feeds, both as pure and as mixed cultures. However, their H₂ producing efficiencies have been found to vary (from 3 to 8 mol/mol hexose) with physiological conditions, type of organisms and composition of feed (starchy waste from sweet potato, wheat, cassava and algal biomass). The present review deals with the possibilities of enhancing H₂ production by integrating metabolic pathways of different organisms-dark fermentative bacteria (from cattle dung, activated sludge, Caldicellulosiruptor, Clostridium, Enterobacter, Lactobacillus, and Vibrio) and photo-fermentative bacteria (such as Rhodobacter, Rhodobium and Rhodopseudomonas). The emphasis has been laid on systems which are driven by undefined dark-fermentative cultures in combination with pure photo-fermentative bacterial cultures using biowaste as feed. Such an integrative approach may prove suitable for commercial applications on a large scale.     

Ecobiotechnological Approach for Exploiting the Abilities of Bacillus to Produce Co-polymer of Polyhydroxyalkanoate

Ecobiotechnological approach is an attractive and economical strategy to enrich beneficial microbes on waste biomass for production of Polyhydroxyalkanoate (PHA). Here, six strains of Bacillus spp. were used to produce co-polymers of PHA from pea-shells. Of the 57 mixed bacterial cultures (BCs) screened, two of the BCs, designated as 5BC1 and 5BC2, each containing 5 strains could produce PHA co-polymer at the rate of 505–560 mg/l from feed consisting of pea-shell slurry (PSS, 2 % total solids) and 1 % glucose (w/v). Co-polymer production was enhanced from 65–560 mg/l on untreated PSS to 1,610–1,645 mg/l from PSS treated with defined hydrolytic bacteria and 1 % glucose. Supplementation of the PSS hydrolysate with sodium propionate enabled 5BC1 to produce co-polymer P(3HB-co-3HV) with a 3HV content up to 13 % and a concomitant 1.46-fold enhancement in PHA yield. Using the principles of ecobiotechnology, this is the first demonstration of PHA co-polymer production by defined co-cultures of Bacillus from biowaste as feed under non-axenic conditions.     

Evolution of organic matter in a full-scale composting plant for the treatment of sewage sludge and biowaste by respiration techniques and pyrolysis-GC/MS

A full-scale composting plant treating in two parallel lines sewage sludge and the source-selected organic fraction of municipal solid waste (OFMSW or biowaste) has been completely monitored. Chemical routine analysis proved not to be suitable for an adequate plant monitoring in terms of stabilization and characterization of the process and final compost properties. However, the dynamic respiration index demonstrated to be the most feasible tool to determine the progression of the degradation and stabilization of organic matter for both sewage sludge and OFMSW lines. Both lines exhibited an important degree of stabilization of organic matter using rapid and cumulative respiration indices. Pyrolysis-GC/MS was applied to the most important inputs, outputs, and intermediate points of the plant. It proved to be a powerful tool for the qualitative characterization of molecular composition of organic matter present in solid samples. A full characterization of the samples considered is also presented.     

Wood ash for application in municipal biowaste composting

This study aimed to clarify the impacts of pH control by wood ash amendment on biowaste composting processes. To achieve this, fresh source separated municipal biowaste was mixed with low doses (2-8% wt/vol) of wood ash and processed in a pilot and large-scale composting systems. The results indicated a correlation between a low initial pH and delay in the early rise of the process temperature. Wood ash elevated the composting temperatures and pH, and stimulated the mineralisation both in the pilot scale and the industrial large-scale processes. According to the results addition of amounts of 4-8% wood ash is sufficient for efficient biowaste composting process and yields a safe end product. However, to minimise the environmental risk for heavy metal contamination, and meet the criteria for the limit values of the impurities in wood ash, strict quality control of the applied wood ashes should be implemented.     

Co-firing of coal and manure biomass: a TG-MS approach

Manure is a rich organic waste which, apart from its traditional use as a fertilizer, could be used as a bioenergy feedstock. In this sense, its utilization as a sole fuel or its co-combustion together with coal would be a choice for the management of this sort of biowaste. However, little is known about the behavior of this biowaste when submitted to high-temperature energy-conversion processes. Thus, the separate combustion of swine manure and coal and their co-combustion (10% dried weight of manure) were studied by simultaneous TG/MS dynamic runs. TG-MS analysis was successfully used as an easy rapid tool to assess the combustion of manure, alone or together with coal. Furthermore, non-isothermal kinetic analysis showed that the Arrhenius activation energy corresponding to the combustion of the blend (125.8-138.9 kJ/mol) was only slightly higher than that of manure (106.4-114.4 kJ/mol) or coal (107.0-119.6 kJ/mol).     

一株产电菌Nitratireductor sp. WJ5-4的筛选及产电分析

【目的】从生物垃圾燃料电池阳极淋洗液中分离一株产电菌WJ5-4,研究其产电特性。【方法】根据菌株的形态、生理生化性质及16S r RNA基因测序分析确定其种属,以该菌株为产电菌,以生物垃圾为底物,构建微生物燃料电池(Microbial fuel cell,MFC),研究在不同接种浓度和底物固含量条件下菌株的产电性能。【结果】菌株WJ5-4被初步鉴定属于Nitratireductor属,当接种量200 m L时可获得最大功率密度135.16 m W/m2、稳定电压370 m V和总有机碳(Total organic carbon,TOC)降解率41.46%。当底物固含量为23%时,可获得最大功率密度163.69 m W/m2、稳定电压434 m V和TOC降解率46.29%。【结论】WJ5-4菌能够利用较高固含量的生物垃圾产电,产电周期较长,为下一步微生物燃料电池处理生物垃圾提供科学依据。     

Bulk density determination as a simple and complementary tool in composting process control

Ten composting facilities (CF) treating source-sorted organic fraction of municipal solid waste (OF) were sampled to study the relationship between the bulk density and the composting process (CP) development. Hundred and fourteen samples from different stages of the CP were considered (organic fraction, initial mixture, final decomposition, final maturation and compost), including the reject materials coming from the densimetric table at postprocessing. Total organic matter (TOM), moisture content (MC), wet bulk density and dry basis (BDd) were determined. Significant differences were detected for MC, TOM and BDd between some stages of the CP. The BDd increased along the CP while TOM decreased. Correlation studies showed a significant negative relationship between TOM and bulk density, especially BDd, during the CP, as a result of the biological activity. Moreover, a clear relationship was also found between TOM and BDd in samples related to reject materials. The results indicate that bulk density could be a simple and useful tool to evaluate the CP, in addition to the others parameters commonly used. At the same time, BDd could be an easy way to infer TOM lost within rejects.     

Ecobiotechnological Strategy to Enhance Efficiency of Bioconversion of Wastes into Hydrogen and Methane

Vegetable wastes (VW) and food wastes (FW) are generated in large quantities by municipal markets, restaurants and hotels. Waste slurries (250 ml) in 300 ml BOD bottles, containing 3, 5 and 7 % total solids (TS) were hydrolyzed with bacterial mixtures composed of: Bacillus, Acinetobacter, Exiguobacterium, Pseudomonas, Stenotrophomonas and Sphingobacterium species. Each of these bacteria had high activities for the hydrolytic enzymes: amylase, protease and lipase. Hydrolysate of biowaste slurries were subjected to defined mixture of H₂ producers and culture enriched for methanogens. The impact of hydrolysis of VW and FW was observed as 2.6- and 2.8-fold enhancement in H₂ yield, respectively. Direct biomethanation of hydrolysates of VW and FW resulted in 3.0- and 1.15-fold improvement in CH₄ yield, respectively. A positive effect of hydrolysis was also observed with biomethanation of effluent of H₂ production stage, to the extent of 1.2- and 3.5-fold with FW and VW, respectively. The effective H₂ yields were 17 and 85 l/kg TS fed, whereas effective CH₄ yields were 61.7 and 63.3 l/kg TS fed, from VW and FW, respectively. This ecobiotechnological strategy can help to improve the conversion efficiency of biowastes to biofuels.