The Impact of Hepatitis B Vaccination Status on the Risk of Diabetes,Implicating Diabetes Risk Reduction by Successful Vaccination

Background

The liver plays a key role in fuel metabolism. It is well established that liver disease is associated with an increased risk for diabetes mellitus. Hepatitis C virus infection has been known to increase the risk of diabetes. However, much less is known about the role of hepatitis B virus (HBV) infection in diabetes. We examined the association of diabetes based on the vaccination status for HBV.

Methods

In this cross-sectional study, we included adult subjects (≥20 y/o) with HBV serology available from the National Health and Nutrition Examination Survey 2005–2010. Diabetes was defined as established diabetes or fasting plasma glucose concentration ≥7.0 mmol/L, 2-hour plasma glucose concentration ≥11.1 mmol/L, or HbA1c ≥ 47.5 mmol/mol (6.5%). Vaccination was based on the reported history and immunization was determined by HBV serology. The odds ratio (OR) with 95% confidence intervals (95% CI) were calculated with consideration of the following covariates: age, gender, BMI, ethnic/racial group, current smoker, current alcohol consumption, family history of diabetes, poverty index, and education.

Results

This study included 15,316 subjects. Among them, 2,320 subjects was immunized based the HBV serology. Among 4,063 subjects who received HBV vaccination, successful vaccination was only noted in 39% of subjects. The HBV vaccination was not associated with diabetes (OR: 1.08, 95%CI: 0.96–1.23). Serology evidence of HBV immunization was associated with a reduced OR of diabetes (0.75, 95%CI: 0.62–0.90). Successful HBV vaccination was also associated with a reduced OR of diabetes (0.67, 95%CI: 0.52–0.84).

Conclusions

Although our study shows the association of HBV vaccination with the reduced odds of diabetes by 33%, a prospective study is warranted to confirm and examine the impact of HBV vaccination in prevention of diabetes.     

Selfish male‐determining element favors the transition from hermaphroditism to androdioecy

According to the current, widely accepted paradigm, the evolutionary transition from hermaphroditism toward separate sexes occurs in two successive steps: an initial, intermediate step in which unisexual individuals, male or female, sterility mutants coexist with hermaphrodites and a final step that definitively establishes dioecy. Two nonexclusive processes can drive this transition: inbreeding avoidance and reallocation of resources from one sexual function to the other. Here, we report results of controlled crosses between males and hermaphrodites in Phillyrea angustifolia, an androdioecious species with two mutually intercompatible, but intraincompatible groups of hermaphrodites. We observed different segregation patterns that can be explained by: (1) epistatic interactions between two unlinked diallelic loci, determining sex and mating compatibility, and (2) a mutation with pleiotropic effects: female sterility, full compatibility of males with both hermaphrodite incompatibility groups, and complete male‐biased sex‐ratio distortion in one of the two groups. Modeling shows that these mechanisms can explain the high frequency of males in populations of P. angustifolia and can promote the maintenance of androdioecy without requiring inbreeding depression or resource reallocation. We thus argue that segregation distortion establishes the right conditions for the evolution of cryptic dioecy and potentially initiates the evolution toward separate sexes.     

Protease Inhibitors Fail To Prevent Pore Formation by the Activated Bacillus thuringiensis Toxin Cry1Aa in Insect Brush Border Membrane Vesicles

To investigate whether membrane proteases are involved in the activity of Bacillus thuringiensis insecticidal toxins, the rate of pore formation by trypsin-activated Cry1Aa was monitored in the presence of a variety of protease inhibitors with Manduca sexta midgut brush border membrane vesicles and by a light-scattering assay. Most of the inhibitors tested had no effect on the pore-forming ability of the toxin. However, phenylmethylsulfonyl fluoride, a serine protease inhibitor, promoted pore formation, although this stimulation only occurred at higher inhibitor concentrations than those commonly used to inhibit proteases. Among the metalloprotease inhibitors, o-phenanthroline had no significant effect; EDTA and EGTA reduced the rate of pore formation at pH 10.5, but only EDTA was inhibitory at pH 7.5. Neither chelator affected the properties of the pores already formed after incubation of the vesicles with the toxin. Taken together, these results indicate that, once activated, Cry1Aa is completely functional and does not require further proteolysis. The effect of EDTA and EGTA is probably better explained by their ability to chelate divalent cations that could be necessary for the stability of the toxin's receptors or involved elsewhere in the mechanism of pore formation.     

Amino acid and divalent ion permeability of the pores formed by the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac in insect midgut brush border membrane vesicles

The pores formed by Bacillus thuringiensis insecticidal toxins have been shown to allow the diffusion of a variety of monovalent cations and anions and neutral solutes. To further characterize their ion selectivity, membrane permeability induced by Cry1Aa and Cry1Ac to amino acids (Asp, Glu, Ser, Leu, His, Lys and Arg) and to divalent cations (Mg²⁺, Ca²⁺ and Ba²⁺) and anions (SO₄²⁻ and phosphate) was analyzed at pH 7.5 and 10.5 with midgut brush border membrane vesicles isolated from Manduca sexta and an osmotic swelling assay. Shifting pH from 7.5 to 10.5 increases the proportion of the more negatively charged species of amino acids and phosphate ions. All amino acids diffused well across the toxin-induced pores, but, except for aspartate and glutamate, amino acid permeability was lower at the higher pH. In the presence of either toxin, membrane permeability was higher for the chloride salts of divalent cations than for the potassium salts of divalent anions. These results clearly indicate that the pores are cation-selective.     

The toxicity test and hypothetical model of Bacillus thuringiensis Cry1Aa helix4

Development of targeted biological agents against agricultural insect pests is of prime importance for the elaboration and implementation of integrated pest management strategies that are environment-friendly, respectful of bio-diversity and safer to human health through reduced use of chemical pesticides. A major goal to understand how Bt toxins work is to elucidate the functions of their three domains. Domains II and III are involved in binding specificity and structural integrity, but the function of Domain I remains poorly understood. Using a Manduca sexta BBMV (brush border membrane vesicles) system, we analyzed its responses to Cry1Aa 15 single-point mutations with altered Domain I helix 4 residues. Light scattering assay showed that toxicity was almost lost in 3 mutants, and we observed significantly reduced toxicity in other 7 mutants. However, 5 mutants retained wild-type toxicity. Using computer software, we simulated the three-dimensional structures of helix 4. Both experimental and bioinform     

Effect of Bacillus thuringiensis Cry1 Toxins in Insect Hemolymph and Their Neurotoxicity in Brain Cells of Lymantria dispar

Little information is available on the systemic effects of Bacillus thuringiensis toxins in the hemocoel of insects. In order to test whether B. thuringiensis-activated toxins elicit a toxic response in the hemocoel, we measured the effect of intrahemocoelic injections of several Cry1 toxins on the food intake, growth, and survival of Lymantria dispar (Lepidoptera) and Neobellieria bullata (Diptera) larvae. Injection of Cry1C was highly toxic to the Lymantria larvae and resulted in the complete inhibition of food intake, growth arrest, and death in a dose-dependent manner. Cry1Aa and Cry1Ab (5 μg/0.2 g [fresh weight] [g fresh wt]) also affected growth and food intake but were less toxic than Cry1C (0.5 μg/0.2 g fresh wt). Cry1E and Cry1Ac (5 μg/0.2 g fresh wt) had no toxic effect upon injection. Cry1C was also highly toxic to N. bullata larvae upon injection. Injection of 5 μg/0.2 g fresh wt resulted in rapid paralysis, followed by hemocytic melanization and death. Lower concentrations delayed pupariation or gave rise to malformation of the puparium. Finally, Cry1C was toxic to brain cells of Lymantria in vitro. The addition of Cry1C (20 μg/ml) to primary cultures of Lymantria brain cells resulted in rapid lysis of the cultured neurons.     

Helix α4 of the Bacillus thuringiensis Cry1Aa Toxin Plays a Critical Role in the Postbinding Steps of Pore Formation

Helix α4 of Bacillus thuringiensis Cry toxins is thought to play a critical role in the toxins'' mode of action. Accordingly, single-site substitutions of many Cry1Aa helix α4 amino acid residues have previously been shown to cause substantial reductions in the protein''s pore-forming activity. Changes in protein structure and formation of intermolecular disulfide bonds were investigated as possible factors responsible for the inactivity of these mutants. Incubation of each mutant with trypsin and chymotrypsin for 12 h did not reveal overt structural differences with Cry1Aa, although circular dichroism was slightly decreased in the 190- to 210-nm region for the I132C, S139C, and V150C mutants. The addition of dithiothreitol stimulated pore formation by the E128C, I132C, S139C, T142C, I145C, P146C, and V150C mutants. However, in the presence of these mutants, the membrane permeability never reached that measured for Cry1Aa, indicating that the formation of disulfide bridges could only partially explain their loss of activity. The ability of a number of inactive mutants to compete with wild-type Cry1Aa for pore formation in brush border membrane vesicles isolated from Manduca sexta was also investigated with an osmotic swelling assay. With the exception of the L147C mutant, all mutants tested could inhibit the formation of pores by Cry1Aa, indicating that they retained receptor binding ability. These results strongly suggest that helix α4 is involved mainly in the postbinding steps of pore formation.During the last few decades, the insecticidal toxins produced by Bacillus thuringiensis have been used increasingly in the forms of formulated sprays and transgenic plants for the highly focused biological control of insect pests (29). At the same time, the mechanism by which these proteins form pores in the apical membrane of midgut epithelial cells of targeted insects has been studied extensively (7, 29). In the case of the three-domain Cry toxins, specificity is mostly attributable to their capacity to bind to certain proteins located on the surface of the intestinal membrane through specific segments of domains II and III, composed mainly of β sheets (16, 27). On the other hand, membrane insertion and pore formation are thought to occur through elements of domain I, composed of a bundle of six amphipathic α-helices surrounding the highly hydrophobic helix α5 (17, 20).Several lines of evidence indicate that helices α4 and α5 play a particularly important role in these processes (3). Spectroscopic studies with synthetic peptides corresponding to domain I helices revealed that α4 and α5 have the greatest propensity for insertion into artificial membranes, although insertion and pore formation were most efficient when α4 and α5 were connected by a segment corresponding to the α4-α5 loop of the toxin (13, 14). A particularly large number of single-site mutations with altered amino acids from these helices, which lead to a strong reduction in the toxicity and pore-forming ability of the toxin, have been characterized (2, 9, 10, 15, 18, 23, 25, 30, 31, 33). Finally, a site-directed chemical modification study has provided strong evidence that α4 lines the lumens of the pores formed by the toxin (23).Recent studies have established that toxin activity is especially sensitive to modifications not only in the charged residues of α4 (31) but in most of its hydrophilic residues (15). Furthermore, the loss of activity of most of these mutants did not result from an altered selectivity or size of the pores but from a reduced pore-forming capacity of the toxin (15, 31). In order to better understand the role of α4 in the mechanism of pore formation, the present study was carried out with a series of previously characterized Cry1Aa mutants in which most of the residues from this helix were replaced by cysteines (15). By subjecting these mutants to circular dichroism (CD), protease sensitivity, pore formation inhibition, and electrophoretic mobility analyses, our data suggest that the mutations in α4 which alter the pore-forming ability of Cry1Aa do so mainly by preventing the proper oligomerization or membrane insertion of the toxin.     

Dry reforming of methane with CO2 on an electron-activated iron catalytic bed

A preliminary experimental investigation of dry reforming of methane with carbon dioxide, that has been performed on an iron bed activated with an electric current is reported. Operating conditions for the reaction included temperature ranging from 700 to 800° C and pressure close to 1 atm. The reaction, involving an excess of pure methane and carbon dioxide, was performed with and without addition of water vapour, provided by hot water saturation of the gaseous feed. According to syngas compositions, the electron flow has a dramatic effect on the conversion of both methane and carbon dioxide. It was shown also that hot water saturation of the CO(2) and CH(4) mixture allowed very good conversion, giving a syngas with a composition very close to what was expected from equilibrium calculations.     

The toxicity test and hypothetical model ofBacillus thuringiensis Cry1Aa helix4

Development of targeted biological agents against agricultural insect pests is of prime importance for the elaboration and implementation of integrated pest management strategies that are environment-friendly, respectful of bio-diversity and safer to human health through reduced use of chemical pesticides. A major goal to understand how Bt toxins work is to elucidate the functions of their three domains. Domains II and III are involved in binding specificity and structural integrity, but the function of Domain I remains poorly understood. Using a Manduca sexta BBMV (brush border membrane vesicles) system, we analyzed its responses to Cry1Aa 15 single-point mutations with altered Domain I helix 4 residues. Light scattering assay showed that toxicity was almost lost in 3 mutants, and we observed significantly reduced toxicity in other 7 mutants. However, 5 mutants retained wild-type toxicity. Using computer software, we simulated the three-dimensional structures of helix 4. Both experimental and bioinformatic analysis showed that residues in Cry1Aa Domain I helix 4 were involved in the formation of ion channels that is critical for its insect toxicity.     

Role of helix 3 in pore formation by the Bacillus thuringiensis insecticidal toxin Cry1Aa

Helix 3 of the Cry1Aa toxin from Bacillus thuringiensis possesses eight charged amino acids. These residues, with the exception of those involved in intramolecular salt bridges (E90, R93, E112, and R115), were mutated individually either to a neutral or to an oppositely charged amino acid. The mutated genes were expressed, and the resultant, trypsin-activated toxins were assessed for their toxicity to Manduca sexta larvae and their ability to permeabilize M. sexta larval midgut brush border membrane vesicles to KCl, sucrose, raffinose, potassium gluconate, and N-methyl-D-glucamine hydrochloride with a light-scattering assay based on osmotic swelling. Most mutants were considerably less toxic than Cry1Aa. Replacing either E101, E116, E118, or D120 by cysteine, glutamine, or lysine residues had only minor effects on the properties of the pores formed by the modified toxins. However, half of these mutants (E101C, E101Q, E101K, E116K, E118C, and D120K) had a significantly slower rate of pore formation than Cry1Aa. Mutations at R99 (R99C, R99E, and R99Y) resulted in an almost complete loss of pore-forming ability. These results are consistent with a model in which alpha-helix 3 plays an important role in the mechanism of pore formation without being directly involved in determining the properties of the pores.