The molecular basis of mutations at the Waxy locus from Amaranthus caudatus L.: evolution of the waxy phenotype in three species of grain amaranth

Polymorphisms at the Waxy locus of Amaranthus caudatus L. collected from a wide range of regions were used to investigate genetic diversity and mutation sites. A comparison of the Waxy locus revealed a very high level of sequence conservation. This result clearly showed low environmental and evolutionary variability in the Waxy gene. We also performed screening to confirm the mutation sites in the coding sequences of all accessions. The results indicate that one insertion in the coding region of Waxy genes was responsible for the change in perisperm starch leading to the waxy phenotype in all accessions of this species, and thus that a single mutation event altered the regulation of the Waxy gene during the domestication of this crop. In addition, phylogenetic analysis showed that waxy phenotypes within each of three species, A. caudatus, A. cruentus and A. hypochondriacus, originated separately or differentiated from nonwaxy phenotypes of each species through a single mutational event (i.e., a frame shift or base substitution). We also compared obvious structural features of the coding sequence of waxy and nonwaxy phenotypes with those of low-amylose phenotypes in A. caudatus. The Waxy coding sequences of low-amylose phenotypes do not show polymorphisms and are identical with those of waxy phenotypes. This could mean that there is another gene that encodes a key enzyme responsible for amylose synthesis as the elementary quantity in tissues other than perisperm in A. caudatus.     

Quantitative trait locus mapping reveals conservation of major and minor loci for powdery mildew resistance in four sources of resistance in mungbean [Vigna radiata (L.) Wilczek]

Powdery mildew (PM) is a common and serious disease of mungbean [Vigna radiata (L.) Wilczek]. A few quantitative trait loci (QTL) for PM resistance in mungbean have been reported. The objective of this study was to locate QTL for PM resistance in two resistant accessions V4718 and RUM5. Simple sequence repeat markers were analyzed in an F₂ population from a cross between Kamphaeng Saen 1 (KPS1; susceptible to PM) and V4718 (resistant to PM), and in F₂ and BC₁F₁ populations from a cross between Chai Nat 60 (CN60; susceptible to PM) and RUM5 (resistant to PM). Progenies of 134 F_2:3 and F_2:4 lines derived from KPS1 × V4718, and 190 F_2:3 and 74 BC₁F_1:2 lines derived from CN60 × RUM5 and CN60 × (CN60 × RUM5), respectively, were evaluated for response to PM under field conditions. Multiple interval mapping identified a major QTL on linkage group (LG) 9 and two minor QTL on LG4 for the resistance in V4718, and detected two major QTL on LG6 and LG9 and one minor QTL on LG4 for the resistance in RUM5. Comparative linkage analysis of the QTL for PM resistance in this study and in previous reports suggests that the resistance QTL on LG9 in V4718, RUM5, ATF3640 and VC6468-11-1A are the same locus or linked. One QTL on LG4 is the same in three sources (V4718, RUM5 and VC1210A). Another QTL on LG6 is the same in two sources (RUM5 and VC6468-11-1A). In addition, one QTL in V4718 on LG4 appears to be a new resistance locus. These different resistance loci will be useful for breeding durably PM-resistant mungbean cultivars.     

Distribution of indole-acetic acid, gibberellin and cytokinins in apoplast and symplast of parthenocarpic tomato fruits

The levels of indole-acetic acid (IAA), gibberellic acid1 (GA₁), trans-zeatin (Z) and trans-zeatin riboside (ZR) in seedless fruits of parthenocarpic tomato (Lycopersicon esculentum Mill. cv. Rarkuna First) were analysed using ¹³C₆-IAA, ²H₂-GA₁, ²H₅-Z and ²H₅-ZR, as internal standards by liquid chromatography–mass spectrometry. Fruits were sampled at 6 cm in diameter (referred to as 6-cm-fruit) and 8 cm (8-cm-fruit, mature green stage) and separated into pericarps, partitions and locule tissues. The pericarps and partitions were centrifuged for the collection of apoplast (AP) solution (sap outside a cell) and symplast (SP) solution (sap within a cell). IAA concentrations of the pericarps and partitions were higher in 8-cm-fruit than in 6-cm-fruit. In the partitions, IAA concentrations of SP solution were higher than those of AP solution in both 6- and 8-cm-fruit. The SP solution of the partitions in 6-cm-fruit had the highest concentration of Z (4.6 pmol/g fresh weight) and was 2.7 times than the AP solution, while in the pericarps Z concentrations were the same level in AP and SP solution. The ZR concentration in locule tissues in 6-cm-fruit (55 pmol/g fresh weight ) was the highest of all parts. The results suggest that the sites of synthesis may be the SP of partitions for IAA and Z, and locules for ZR.     

QTL mapping for salt tolerance and domestication-related traits in Vigna marina subsp. oblonga,a halophytic species

Key message

QTL mapping in F ₂ population [ V. luteola × V. marina subsp. oblonga ] revealed that the salt tolerance in V. marina subsp. oblonga is controlled by a single major QTL.

Abstract

The habitats of beach cowpea (Vigna marina) are sandy beaches in tropical and subtropical regions. As a species that grows closest to the sea, it has potential to be a gene source for breeding salt-tolerant crops. We reported here for the first time, quantitative trait loci (QTLs) mapping for salt tolerance in V. marina. A genetic linkage map was constructed from an F₂ population of 120 plants derived from an interspecific cross between V. luteola and V. marina subsp. oblonga. The map comprised 150 SSR markers. The markers were clustered into 11 linkage groups spanning 777.6 cM in length with a mean distance between the adjacent markers of 5.59 cM. The F_2:3 population was evaluated for salt tolerance under hydroponic conditions at the seedling and developmental stages. Segregation analysis indicated that salt tolerance in V. marina is controlled by a few genes. Multiple interval mapping consistently identified one major QTL which can explain about 50 % of phenotypic variance. The flanking markers may facilitate transfer of the salt tolerance allele from V. marina subsp. oblonga into related Vigna crops. The QTL for domestication-related traits from V. marina are also discussed.     

Morphogenic activity of fibroblast growth factor-2 on primary neural precursor cells in three-dimensional culture

Mouse neural precursor cells (NPC) were dissociated from fetal heads at the 10th day of gestation. When clumps of NPC were cultured in collagen gel, they grew and reorganized neural tube-like structures in medium containing fetal calf serum at 10% and supplemented with insulin, transferrin, cholera toxin and selenite. However, dissociated NPC died when they were cultured in collagen gel at low density in the same medium. Addition of fibroblast growth factor-2 (FGF-2) to this culture stimulated growth of NPC and formation of neural tube-like structures. The requirement for FGF-2 disappeared in high seeding density culture: they grew and formed neural tube-like structures without FGF-2. The structures formed in collagen gel were immunohistochemically positive against anti-FGF-2 antibody. The results show that the three-dimensional culture system provides a useful tool to study the roles of FGF-2 in morphogenesis of the central nervous system.     

Mapping of quantitative trait loci for a new source of resistance to bruchids in the wild species Vigna nepalensis Tateishi & Maxted (Vigna subgenus Ceratotropis)

Azuki bean breeders have long been interested in producing azuki bean [Vigna angularis (Willd.) Ohwi & Ohashi] varieties with bruchid resistance. A new bruchid (Callosobruchus spp.) resistance source was found in V. nepalensis Tateishi & Maxted, a species that is cross compatible with azuki bean. Quantitative trait loci (QTLs) analysis for resistance to C. chinensis (L.) and C. maculatus (F.) was conducted using F(2) (V. nepalensis x V. angularis) and BC(1)F(1) [(V. nepalensis x V. angularis) x V. angularis] populations derived from crosses between the bruchid resistant species V. nepalensis and bruchid susceptible species V. angularis. Resistance was measured using two traits, percentage of seeds damaged by bruchids and the time taken for adult bruchids to emerge from seeds. Based on the results from both populations seven QTLs were detected for bruchid resistance; five QTLs for resistance to C. chinensis and two QTLs for resistance to C. maculatus. The different locations found for some resistance QTL to the two bruchid species suggests different resistance mechanisms. QTLs on linkage group (LG) 1 and LG2 for bruchid resistance to C. chinensis co-localized with seed size QTLs suggesting that incremental increase in seed size accompanied susceptibility to C. chinensis. Based on linked markers the QTL on these two linkage groups appear to be the same as previously reported in other Asian Vigna. However, several other QTLs were newly detected including one on LG4 that appears unrelated to seed size. Transfer of these new sources of bruchid resistance from V. nepalensis to azuki bean will be aided by the progress being made in azuki genome mapping.     

Epitope spreading to citrullinated antigens in mouse models of autoimmune arthritis and demyelination

Introduction  

Anti-citrullinated protein antibodies have a diagnostic role in rheumatoid arthritis (RA); however, little is known about their origins and contribution to pathogenesis. Citrullination is the post-translational conversion of arginine to citrulline by peptidyl arginine deiminase, and increased citrullination of proteins is observed in the joint tissue in RA and in brain tissue in multiple sclerosis (MS).     

Tooth regeneration from newly established cell lines from a molar tooth germ epithelium

In order to investigate tooth development, several cell lines of the dental epithelium and ectomesenchyme have been established. However, no attempt has been reported to regenerate teeth with cell lines. Here, we have established several clonal cell lines of the dental epithelium from a p53-deficient fetal mouse. They expressed specific markers of the dental epithelium such as ameloblastin and amelogenin. A new method has been developed to bioengineer tooth germs with dental epithelial and mesenchymal cells. Reconstructed tooth germs with cell lines and fetal mesenchymal cells were implanted under kidney capsule. The germs regenerated teeth with well-calcified structures as seen in natural tooth. Germs without the cell lines developed bone. This is the first success to regenerate teeth with dental epithelial cell lines. They are useful models in vitro for investigation of mechanisms in morphogenesis and of cell lineage in differentiation, and for clinical application for tooth regeneration.