Desulfurization of model and diesel oils by resting cells of Gordona sp.

The desulfurization activity of the resting cells of Gordona sp. CYKS1 was strongly depended on harvest time and the highest value when the cells had been harvested in the early growth phase (0.12 mg sulfur g^–1 cell^–1 h^–1). For the model oil, hexadecane containing dibenzothiophene, the specific desulfurization rate decreased as the reaction proceeded. Both the specific and the volumetric desulfurization rates were not significantly affected by the aqueous-to-oil phase ratio. The diesel oils, light gas oil and a middle distillate unit feed were desulfurized at higher rates (ca. 0.34 mg sulfur g^–1 cell^–1 h^–1) than the model oil (0.12 mg sulfur g^–1 cell^–1 h^–1).     

Disrupted phylogeographical microsatellite and chloroplast DNA patterns indicate a vicariance rather than long‐distance dispersal origin for the disjunct distribution of the Chilean endemic Dioscorea biloba (Dioscoreaceae) around the Atacama Desert

Aim The Chilean endemic Dioscorea biloba (Dioscoreaceae) is a dioecious geophyte that shows a remarkable 600 km north–south disjunction in the peripheral arid area of the Atacama Desert. Its restricted present‐day distribution and probable Neogene origin indicate that its populations have a history linked to that of the Atacama Desert, making this an ideal model species with which to investigate the biogeography of the region. Location Chile, Atacama Desert and peripheral arid area. Methods Two hundred and seventy‐five individuals from nine populations were genotyped for seven nuclear microsatellite loci, and plastid trnL–F and trnT–L sequences were obtained for a representative subset of these. Analyses included the estimation of genetic diversity and population structure through clustering, Bayesian and analysis of molecular variance analyses, and statistical parsimony networks of chloroplast haplotypes. Isolation by distance was tested against alternative dispersal hypotheses. Results Microsatellite markers revealed moderate to high levels of genetic diversity within populations, with those from the southern Limarí Valley showing the highest values and northern populations showing less exclusive alleles. Bayesian analysis of microsatellite data identified three genetic groups that corresponded to geographical ranges. Chloroplast phylogeography revealed no haplotypes shared between northern and southern ranges, and little haplotype sharing between the two neighbouring southern valleys. Dispersal models suggested the presence of extinct hypothetical populations between the southern and northern ranges. Main conclusions Our results are consistent with prolonged isolation of the northern and southern groups, mediated by the life‐history traits of the species. Significant isolation was revealed at both large and moderate distances as gene flow was not evident even between neighbouring valleys. Bayesian analyses of microsatellite and chloroplast haplotype diversity identified the southern area of Limarí as the probable area of origin of the species. Our data do not support recent dispersal of D. biloba from the southern range into Antofagasta, but indicate the fragmentation of an earlier wider range, concomitant with the Pliocene–Pleistocene climatic oscillations, with subsequent extinctions of the Atacama Desert populations and the divergence of the peripheral ones as a consequence of genetic drift.     

Pattern analysis of stem cell differentiation during <Emphasis Type="Italic">in vitro Arabidopsis</Emphasis> organogenesis

Plant somatic cells have the capability to switch their cell fates from differentiated to undifferentiated status under proper culture conditions, which is designated as totipotency. As a result, plant cells can easily regenerate new tissues or organs from a wide variety of explants. However, the mechanism by which plant cells have such remarkable regeneration ability is still largely unknown. In this study, we used a set of meristem-specific marker genes to analyze the patterns of stem cell differentiation in the processes of somatic embryogenesis as well as shoot or root organogenesis in vitro. Our studies furnish preliminary and important information on the patterns of the de novo stem cell differentiation during various types of in vitro organogenesis.     

激光光漂恢复技术测定林蛙卵第一次卵裂前卵表面的运动

激光光漂恢复技术测定了异硫氰基荧光素标记的林蛀卵表面分子在第一次卵裂前的运动。发现固着在玻片上的剥离“细胞膜”的分子运动形式为扩散。扩散系数为(4.6±1.3)×10~(-12)cm~2/s,可动部份为15%。完整卵子上的分子运动形式为流动。细胞膜在不停地流动着。它可能起着协助细胞质运动的作用。细胞膜流动的速度随时间而异,卵裂前不久,在大多数的卵子上,出现两个流动较慢的谷,少数细胞只测到一个谷。这可能与光漂起始时间,光斑与未来分裂沟的距离,和卵子间的差异有关。也讨论了这种速度变化与表面收缩波的关系。     

A high‐throughput method to quantify feeding rates in aquatic organisms: A case study with Daphnia

1. Food ingestion is one of the most basic features of all organisms. However, obtaining precise—and high‐throughput—estimates of feeding rates remains challenging, particularly for small, aquatic herbivores such as zooplankton, snails, and tadpoles. These animals typically consume low volumes of food that are time‐consuming to accurately measure.
2. We extend a standard high‐throughput fluorometry technique, which uses a microplate reader and 96‐well plates, as a practical tool for studies in ecology, evolution, and disease biology. We outline technical and methodological details to optimize quantification of individual feeding rates, improve accuracy, and minimize sampling error.
3. This high‐throughput assay offers several advantages over previous methods, including i) substantially reduced time allotments per sample to facilitate larger, more efficient experiments; ii) technical replicates; and iii) conversion of in vivo measurements to units (mL^‐1 hr^‐1 ind^‐1) which enables broad‐scale comparisons across an array of taxa and studies.
4. To evaluate the accuracy and feasibility of our approach, we use the zooplankton, Daphnia dentifera, as a case study. Our results indicate that this procedure accurately quantifies feeding rates and highlights differences among seven genotypes.
5. The method detailed here has broad applicability to a diverse array of aquatic taxa, their resources, environmental contaminants (e.g., plastics), and infectious agents. We discuss simple extensions to quantify epidemiologically relevant traits, such as pathogen exposure and transmission rates, for infectious agents with oral or trophic transmission.

     

Non‐pollinating cheater wasps benefit from seasonally poor performance of the mutualistic pollinating wasps at the northern limit of the range of Ficus microcarpa

1. Species interactions in tightly bound ecological mutualisms often feature highly specialised species' roles in which competitive exclusion may preclude multi‐species coexistence. Among the 800 fig (Ficus) species, it was originally considered that each was pollinated by their own wasp (Agaonidae). However, recent investigations show that this ‘one‐to‐one’ rule often breaks down, as fig species regularly host multiple agaonids but in ways suggesting that competitive processes still mediate biodiversity outcomes. 2. A phenological survey was conducted of the fig–fig wasp pair, Ficus microcarpa and its associated pollinating wasp, alongside its sister species, the cheating wasp, in Xishuangbanna, China. 3. Reproductive output underwent extreme seasonal variation. Seed and pollinator production fell markedly during cooler, drier months, although high levels of fig production continued. However, this resource was predominantly utilised by the cheater species, which offers no pollination services. Pollinators and cheaters rarely co‐occur, suggesting that temporal coexistence is constrained by competition for access to figs. 4. The overall findings indicate periodic rearrangements of mutualism dynamics, probably resulting from a strongly seasonal environment. Sympatric co‐occurrence may result from a window of opportunity for a functionally divergent agaonid, potentially due to constraints on the main pollinator in adapting to variable year‐round conditions that prevent competitive exclusion.     

What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.