Effects of temperature and pH on growth and antioxidant content of the microalga Scenedesmus obliquus

Reactive forms of oxygen can damage DNA (among other molecules), thus triggering, e.g., atherogenesis and carcinogenesis. However, such dietary antioxidants as lutein and β-carotene can effectively inactivate them; these compounds were found to high levels in a novel strain (M2-1) of the microalga Scenedesmus obliquus. The independent and combined effects of pH and temperature on its rates of growth and production of antioxidants were experimentally assessed, via a full factorial experimental design; the effects of each parameter independently, and of their interactions were accordingly quantified by ANOVA. Our results indicated that temperature plays a more important role on the maximum specific growth rate than pH; in terms of antioxidant content, pH and, to a lesser extent, temperature also have relevant effects. Consequently, the highest rate of biomass specific growth (0.294 ± 0.013 day(-1)) and biomass productivity (0.837 ± 0.054 mg L(-1) day(-1)) were associated with relatively low pH (6) and relatively high temperature (30°C). Conversely, the antioxidant production rate increased with pH; hence, the highest productivity (0.638 mg L(-1) day(-1)) was attained at pH 8 and 30°C. At the best operating conditions for antioxidant content, the levels of lutein and β-carotene were 203.57 ± 1.41 and 18.20 ± 0.33 mg mL(-1), respectively; the maximum production of either one occurred at the early exponential phase.     

Coccolithophorid algae culture in closed photobioreactors

The feasibility of growth, calcium carbonate and lipid production of the coccolithophorid algae (Prymnesiophyceae), Pleurochrysis carterae, Emiliania huxleyi, and Gephyrocapsa oceanica, was investigated in plate, carboy, airlift, and tubular photobioreactors. The plate photobioreactor was the most promising closed cultivation system. All species could be grown in the carboy photobioreactor. However, P. carterae was the only species which grew in an airlift photobioreactor. Despite several attempts to grow these coccolithophorid species in the tubular photobioreactor (Biocoil), including modification of the airlift and sparger design, no net growth could be achieved. The shear produced by turbulence and bubble effects are the most likely reasons for this failure to grow in the Biocoil. The highest total dry weight, lipid and calcium carbonate productivities achieved by P. carterae in the plate photobioreactors were 0.54, 0.12, and 0.06 g L⁻¹ day⁻¹ respectively. Irrespective of the type of photobioreactor, the productivities were P. carterae > E. huxleyi > G. oceanica. Pleurochrysis carterae lipid (20–25% of dry weight) and calcium carbonate (11–12% of dry weight) contents were also the highest of all species tested. Biotechnol. Bioeng. 2011;108:2078–2087. © 2011 Wiley Periodicals, Inc.     

Prediction of volumetric productivity of an outdoor photobioreactor

Volumetric productivity of Monodus subterraneus cultivated in an outdoor pilot-plant bubble column was predicted with a mathematical model. Two border cases to model the photobioreactor were chosen. Firstly, a model with no light integration in which it is assumed that microalgae can adapt immediately to local light conditions. Secondly, full light integration implicating that microalga can convert all absorbed light with a photosynthetic yield based on average light intensity. Because temperature and light conditions in our photobioreactor changed during the day, photosynthetic yields at any combination of temperature and light intensity were needed. These were determined in repeated-batch lab-scale experiments with an experimental design. The model was evaluated in an outdoor bubble column at different natural light conditions and different temperatures. Volumetric productivities in the bubble column were predicted and compared with experimental volumetric productivities. The light integration model over-estimated productivity, while the model in which we assumed no light integration under-estimated productivity. Light integration occurred partly (47%) during the period investigated. The average observed biomass yield on light was 0.60 g.mol(-1). The model of partly light integration predicted an average biomass yield on light of 0.57 g.mol(-1) and predicted that productivity could have been increased by 19% if culture temperature would have been maintained at 24 degrees C.     

Kinetic modeling of the photosynthetic growth of Chlamydomonas reinhardtii in a photobioreactor

The aim of this study was to establish and validate a model for the photosynthetic growth of Chlamydomonas reinhardtii in photobioreactors (PBRs). The proposed model is based on an energetic analysis of the excitation energy transfer in the photosynthesis apparatus (the Z-scheme for photosynthesis). This approach has already been validated in cyanobacteria (Arthorspira platensis) and is extended here to predict the volumetric biomass productivity for the microalga C. reinhardtii in autotrophic conditions, taking into consideration the two metabolic processes taking place in this eukaryotic microorganism, namely photosynthesis and respiration. The kinetic growth model obtained was then coupled to a radiative transfer model (the two-flux model) to determine the local kinetics, and thereby the volumetric biomass productivity, in a torus PBR. The model was found to predict PBR performances accurately for a broad set of operating conditions, including both light-limited and kinetic growth regimes, with a variance of less than 10% between experimental results and simulations.     

Theoretical investigation of biomass productivities achievable in solar rectangular photobioreactors for the cyanobacterium Arthrospira platensis

Modeling was done to simulate whole-year running of solar rectangular photobioreactors (PBRs). Introducing the concept of ideal reactor, the maximal biomass productivity that could be achieved on Earth on nitrate as N-source was calculated. Two additional factors were also analyzed with respect to dynamic calculations over the whole year: the effect of PBR location and the effects of given operating conditions on the resulting decrease in productivity compared with the ideal one. Simulations were conducted for the cyanobacterium Arthospira platensis, giving an ideal productivity (upper limit) in the range 55-60 tX ha(-1) year(-1) for a sun tracking system (and around 35-40 tX ha(-1) year(-1) for a fixed horizontal PBR). For an implantation in France (Nantes, west coast), the modification in irradiation conditions resulted in a decrease in biomass productivity of 40%. Various parameters were investigated, with special emphasis on the influence of the incident angle of solar illumination on resulting productivities, affecting both light capture and light transfer inside the bulk culture. It was also found that with appropriate optimization of the residence time as permitted by the model, productivities close to maximal could be achieved for a given location.     

Rotating algal biofilm reactor and spool harvester for wastewater treatment with biofuels by-products

Maximizing algae production in a wastewater treatment process can aid in the reduction of soluble nitrogen and phosphorus concentrations in the wastewater. If harvested, the algae-based biomass offers the added benefit as feedstock for the production of biofuels and bioproducts. However, difficulties in harvesting, concentrating, and dewatering the algae-based biomass have limited the development of an economically feasible treatment and production process. When algae-based biomass is grown as a surface attached biofilm as opposed to a suspended culture, the biomass is naturally concentrated and more easily harvested. This can lead to less expensive removal of the biomass from wastewater, and less expensive downstream processing in the production of biofuels and bioproducts. In this study, a novel rotating algal biofilm reactor (RABR) was designed, built, and tested at bench (8 L), medium (535 L), and pilot (8,000 L) scales. The RABR was designed to operate in the photoautotrophic conditions of open tertiary wastewater treatment, producing mixed culture biofilms made up of algae and bacteria. Growth substrata were evaluated for attachment and biofilm formation, and an effective substratum was discovered. The RABR achieved effective nutrient reduction, with average removal rates of 2.1 and 14.1 g m(-2) day(-1) for total dissolved phosphorus and total dissolved nitrogen, respectively. Biomass production ranged from 5.5 g m(-2) day(-1) at bench scale to as high as 31 g m(-2) day(-1) at pilot scale. An efficient spool harvesting technique was also developed at bench and medium scales to obtain a concentrated product (12-16% solids) suitable for further processing in the production of biofuels and bioproducts.     

光生物反应器中螺旋藻培养条件的优化

利用正交实验对搅拌式光生物反应器中钝顶螺旋藻(Spirulina platensis Geitl)的培养条件即搅拌速度、通气量和光照强度进行优化.实验结果表明:当培养温度为30℃时,通过正交实验所获得的最佳培养条件为搅拌转速120 r·min-1,通气量80 L·h-1,光照强度5000lx.在最佳培养条件下,收获时螺旋藻的干重为1.922 g·L-1.根据回归模型得到相应的优化条件为:光照强度5000lx,通气量150L·h-1,搅拌转速111.70r·min-1,收获量(干重)的预测值为2.293 g·L-1.另外,10%的接种量有利于螺旋藻的生长.