感控干预在控制多重耐药定植菌医院感染的临床研究

目的研究多重耐药定植菌与医院感染的关系以及去定植措施的效果。方法对入住ICU的患者进行多重耐药定植菌筛查,观察阳性患者和阴性患者医院感染发生率;将阳性患者随机分为对照组和试验组,对照组采用常规的预防控制措施,试验组加上安尔碘Ⅲ去鼻腔MRSA、口服金双歧去肠道产ESBLs肠杆菌措施,观察两组患者医院感染发生率以及定植菌与医院感染的关系,对比两组去定植效果。结果ICU多重耐药菌定植率为31. 16% ;多重耐药定植菌筛查阴性患者医院感染率为7. 56%,阳性患者医院感染率为15.47% （P 〈0.01）;对照组医院感染率为20.79%,试验组医院感染率为22. 22% （P 〉0. 05）;对照组定植菌医院感染率为4. 95% ,试验组定植菌医院感染为0（ P 〈0.01）;对照组产ESBLs大肠埃希菌定植自行清除率为26. 31% ,试验组产ESBLs大肠埃希菌去定植率为80. 95% （P 〈 0. 01）。结论ICU患者多重耐药菌定植率高,多重耐药菌定植患者医院感染率高,口服金双歧去肠道产ESBLs细菌干预措施有效,安尔碘Ⅲ去鼻腔MRSA效果需继续研究。     

A structural model of PpoA derived from SAXS-analysis—Implications for substrate conversion

In plants and mammals, oxylipins may be synthesized via multi step processes that consist of dioxygenation and isomerization of the intermediately formed hydroperoxy fatty acid. These processes are typically catalyzed by two distinct enzyme classes: dioxygenases and cytochrome P450 enzymes. In ascomycetes biosynthesis of oxylipins may proceed by a similar two-step pathway. An important difference, however, is that both enzymatic activities may be combined in a single bifunctional enzyme. These types of enzymes are named Psi-factor producing oxygenases (Ppo). Here, the spatial organization of the two domains of PpoA from Aspergillus nidulans was analyzed by small-angle X-ray scattering and the obtained data show that the enzyme exhibits a relatively flat trimeric shape. Atomic structures of the single domains were obtained by template-based structure prediction and docked into the enzyme envelope of the low resolution structure obtained by SAXS. EPR-based distance measurements between the tyrosyl radicals formed in the activated dioxygenase domain of the enzyme supported the trimeric structure obtained from SAXS and the previous assignment of Tyr374 as radical-site in PpoA. Furthermore, two phenylalanine residues in the cytochrome P450 domain were shown to modulate the specificity of hydroperoxy fatty acid rearrangement.     

“吃”砒霜的细菌--解析微生物的砷代谢

研究发现一些微生物可以利用剧毒的类金属砷(As)为自身生长获取能量甚至用砷代替磷维持生长。本文综合分析了近期的研究进展,从以下6方面解析微生物多重的砷代谢产能机制:(1)化能无机自养As(Ⅲ)氧化供能;(2)有机异养型As(Ⅲ)氧化供能;(3)呼吸性As(Ⅴ)还原供能;(4)As(Ⅲ)氧化偶联的光合作用;(5)As(Ⅲ)氧化、As(Ⅴ)、还原As(Ⅲ)氧化偶联的光合作用之间的关联;(6)As(Ⅴ)代替磷维持细菌生长。阐明微生物利用砷的机理在生命起源、生命多样性、进化、地球化学循环及污染治理等方面都具有重要价值。     

瑞拉菌素产生菌S-5120菌株防治黄瓜霜霉病害的研究初报

经黄瓜霜霉病孢子萌发试验和离体叶片抑菌试验表明,瑞拉菌素产生菌S-5120菌株和瑞拉菌素均对黄瓜霜霉病有较强抑制作用。温室防病试验表明,瑞拉菌素产生菌S-5120发酵液对黄瓜霜霉病有明显的保护和治疗作用。相对保护效果达75．17％;治疗效果达69．69％,且高于农抗-120的相对防效62．65％。     

一株油藏嗜热厌氧杆菌的分离、鉴定及代谢产物特征

[目的]了解油藏环境中细菌的生理生化特性及代谢产物.[方法]采用Hungate厌氧操作技术从胜利油田罗801区块油层采出水中分离到一株厌氧杆菌SC-2.采用生理生化鉴定结合16S rDNA序列的系统发育学分析确定该菌株的系统发育地位,用气相色谱分析其代谢产物.[结果]菌株SC-2为严格厌氧的革兰氏阴性杆菌,菌体大小为0.38 um×1.7um-3.9um,单生、成对或成串生长,产端生芽孢.温度生长范围40℃-75℃(最适温度70℃);pH范围5.5-9.5(最适pH 6.5);NaCl浓度范围0%～5%(最适NaCl浓度0%).能够利用葡萄糖、麦芽糖、甘露糖、木糖等多种碳水化合物,发酵葡萄糖的产物是乙醇、乙酸、丙酸、H2、CO2及少量的乳酸.菌株SC-2的(G C)mol%含量为30.8%,与Thermoanaerobacter mathranii subsp.mathranii的16S rDNA序列相似性为99.85%.菌株利用葡萄糖产乙酸、乙醇的最佳初始pH为8.0;酵母粉能刺激生长并显著提高发酵葡萄糖的产酸、产醇率;培养基中添加4%(V/V)的乙醇能明显抑制菌体生长.[结论]菌株SC-2是从特殊生境(油层采出水)中分离到的一株嗜热、耐盐的厌氧菌,其发酵葡萄糖产生的代谢产物有利于改善油藏中的微环境.菌株SC-2与T.mathranii subsp.mathranii 11426T的最适pH和最大耐受NaCl浓度有所不同,且二者的(G C)mol%含量差异较大.     

蛋白酶分泌菌对重金属胁迫的反应

本文研究了Pb、Zn、Cu和Cd对3种蛋白酶产生菌：碱性地衣芽孢杆菌2709(Bacillus licheniformis 2709)、中性枯草杆菌1.398(Bacillus subtilis1.398)和酸性宇佐美曲霉537(Aspergillus usamii 537)生长及其酶活性的影响, 并采用生长抑制皿分析(GIPA)方法针对3种菌株在Pb、Zn、Cu、Cd不同胁迫浓度下的生长量进行打分, 分析其耐性与抗性指标(MTC与MIC)。结果表明4种重金属在超过一定临界浓度后, 对3种菌株的生长和蛋白酶活性均产生了较大的抑制作用。碱性蛋白酶对4种重金属均具有较大的适应性, 其次是中性蛋白酶对Zn和Cd具有一定的适应性, 而酸性蛋白酶对4种重金属均表现出被抑制状态。3种菌株对Pb和Zn耐性与抗性最高(2.0 mmol/L~6.0 mmol/L), 其次是对Cd也具有一定的抗性(0.5 mmol/L~0.75 mmol/L)。     

节杆菌K1108乙内酰脲酶产酶条件研究

研究了乙内酰脲酶产生菌节杆菌K1108的产酶条件。该菌乙内酰脲酶为诱导酶,存在于细胞内,乙内酰脲水解酶和N氨甲酰氨基酸水解酶是同时被诱导产生。最适诱导物为5苄基乙内酰脲,而5吲哚甲基乙内酰脲和5苯基乙内酰脲等不能诱导其酶的产生。筛选到一种安慰诱导物,诱导活性提高了2倍多。对产酶培养基进行了筛选和优化,在最适条件下,K1108产酶能力可达108U/mL。     

Role of LCA in the design of research and development (R&D) of novel processes subject to IPPC and BAT

Establishing BAT (Best Available Techniques) for processes subject to IPPC is a new barrier and one that processes in the development stage need to be aware of. For multi-functional processes, the sectorial approach adopted under IPPC (Integrated Pollution Prevention and Control) increases the potential problems. Life Cycle Assessment (LCA) is an established tool to assist establishing BAT but is difficult to apply in its full form at the Research and Development (R&D) stage. A review of LCA in the context of a case study, the Trefoil kiln process, concludes that it has the flexibility to cope with multi-functionality and that use of key environmental issues and key indicators could overcome the informational gaps. Environmental burdens can be presented appropriately provided the research identifies appropriate allocation methods. The use of LCA thinking provided useful insight on the content of the research programme.