Factors determining the reconstructive denaturation of proteins in sodium dodecyl sulfate solutions. Further circular dichroism studies on structural reorganization of seven proteins

The factors determining the onset and extent of reconstructive denaturation of proteins were considered by comparing circular dichroism (CD) data of seven proteins and previously published findings. The effects of sodium dodecyl sulfate (SDS) on the conformation of the following proteins were tested: lysozyme, the mitogens fromPhytolacca americana (fractions Pa2 and Pa4), lectin fromWistaria floribunda, ovine lutropin, a Bence Jones protein, and histone H2B. While the helix content of lysozyme was raised by SDS slightly, in the Bence Jones protein andW. floribunda lectin it increased from near zero to about 25–30%. In histone H2B the helix content was raised by SDS even to about 48%. However, no clear indication of helix formation could be observed in the mitogens and lutropin, even at low pH or 2.0–2.5. The tertiary structure of the proteins was perturbed by SDS. It was concluded that the reorganization of secondary structure of the proteins was favored by the following factors: (1) presence of helicogenic amino acid sequences in the protein, (2) availability of positively charged sites of the basic amino acids for interactions with the dodecyl ion, (3) absence of a large surplus of negatively charged sites on the surface of protein, and (4) absence of extensive disulfide cross-linking within the macromolecule. Both hydrophobic and electrostatic interactions occur in reconstructive denaturation, and the newly formed helices are stabilized by hydrophobic shielding by the alkyl chains of the alkyl sulfate.     

Regulation of voltage-gated Ca channels by lipids

Great skepticism has surrounded the question of whether modulation of voltage-gated Ca²⁺ channels (VGCCs) by the polyunsaturated free fatty acid arachidonic acid (AA) has any physiological basis. Here we synthesize findings from studies of both native and recombinant channels where micromolar concentrations of AA consistently inhibit both native and recombinant activity by stabilizing VGCCs in one or more closed states. Structural requirements for these inhibitory actions include a chain length of at least 18 carbons and multiple double bonds located near the fatty acid's carboxy terminus. Acting at a second site, AA increases the rate of VGCC activation kinetics, and in Ca_V2.2 channels, increases current amplitude. We present evidence that phosphatidylinositol 4,5-bisphosphate (PIP₂), a palmitoylated accessory subunit (β_2a) of VGCCs and AA appear to have overlapping sites of action giving rise to complex channel behavior. Their actions converge in a physiologically relevant manner during muscarinic modulation of VGCCs. We speculate that M₁ muscarinic receptors may stimulate multiple lipases to break down the PIP₂ associated with VGCCs and leave PIP₂'s freed fatty acid tails bound to the channels to confer modulation. This unexpectedly simple scheme gives rise to unanticipated predictions and redirects thinking about lipid regulation of VGCCs.     

Site-Specific Structural Variations Accompanying Tubular Assembly of the HIV-1 Capsid Protein

The 231-residue capsid (CA) protein of human immunodeficiency virus type 1 (HIV-1) spontaneously self-assembles into tubes with a hexagonal lattice that is believed to mimic the surface lattice of conical capsid cores within intact virions. We report the results of solid-state nuclear magnetic resonance (NMR) measurements on HIV-1 CA tubes that provide new information regarding changes in molecular structure that accompany CA self-assembly, local dynamics within CA tubes, and possible mechanisms for the generation of lattice curvature. This information is contained in site-specific assignments of signals in two- and three-dimensional solid-state NMR spectra, conformation-dependent ¹⁵N and ¹³C NMR chemical shifts, detection of highly dynamic residues under solution NMR conditions, measurements of local variations in transverse spin relaxation rates of amide ¹H nuclei, and quantitative measurements of site-specific ¹⁵N–¹⁵N dipole–dipole couplings. Our data show that most of the CA sequence is conformationally ordered and relatively rigid in tubular assemblies and that structures of the N-terminal domain (NTD) and the C-terminal domain (CTD) observed in solution are largely retained. However, specific segments, including the N-terminal β-hairpin, the cyclophilin A binding loop, the inter-domain linker, segments involved in intermolecular NTD–CTD interactions, and the C-terminal tail, have substantial static or dynamical disorder in tubular assemblies. Other segments, including the 3₁₀-helical segment in CTD, undergo clear conformational changes. Structural variations associated with curvature of the CA lattice appear to be localized in the inter-domain linker and intermolecular NTD–CTD interface, while structural variations within NTD hexamers, around local 3-fold symmetry axes, and in CTD–CTD dimerization interfaces are less significant.     

Morphological mutation of Lentinula edodes mycelium, particularly detectable in the dikaryotic state

A morphological mutation particularly detectable in the dikaryotic state was found in Lentinula edodes. The mutant dikaryon was readily distinguishable from the normal dikaryon by the irregularly branched short hyphae, very slow hyphal growth, and sparse aerial hyphae. Genetic analysis revealed that expression of this mutation was controlled by a single recessive gene, mor-13. Linkage analysis showed that the mor-13 was not linked to either the incompatibility factors (A and B) or the five kinds of mor genes that were segregated independently of each other in a previous study. Contribution no. 380 from the Tottori Mycological Institute     

Utilization of Serine, Leucine, Isoleucine, and Valine byThermoanaerobacter brockiiin the Presence of Thiosulfate orMethanobacteriumsp. as Electron Acceptors

Thermoanaerobacter brockiifermented serine to acetate and ethanol. It oxidized leucine to isovalerate, isoleucine to 2-methylbutyrate, and valine to isobutyrate only in the presence of thiosulfate, or when co-cultured withMethanobacteriumsp. This oxidative deamination was rendered thermodynamically possible by the ability ofT. brockiito reduce thiosulfate to sulfide or the transfer of reducing equivalents to the hydrogenotrophic methanogen. The results suggest thatT. brockiimay be of ecological significance in thermal environments in the turnover of amino acids, especially with thiosulfate or H₂-utilizing methanogens are present.     

ROCKing cytokine secretion balance in human T cells

Balanced regulation of cytokine secretion in T cells is critical for maintenance of immune homeostasis and prevention of autoimmunity. The Rho-associated kinase (ROCK) 2 signaling pathway was previously shown to be involved in controlling of cellular movement and shape. However, recent work from our group and others has demonstrated a new and important role of ROCK2 in regulating cytokine secretion in T cells. We found that ROCK2 promotes pro-inflammatory cytokines such as IL-17 and IL-21, whereas IL-2 and IL-10 secretion are negatively regulated by ROCK2 under Th17-skewing activation. Also, in disease, but not in steady state conditions, ROCK2 contributes to regulation of IFN-γ secretion in T cells from rheumatoid arthritis patients. Thus, ROCK2 signaling is a key pathway in modulation of T-cell mediated immune responses underscoring the therapeutic potential of targeted inhibition of ROCK2 in autoimmunity.     

The occurrence and frequency of 2n pollen in 2x, 4x,and 6x wild,tuber-bearing Solanum species from Mexico,and Central and South America

Summary The occurrence of 2n pollen-producing plants was investigated in 187 plant introductions (PIs) of 38 wild species of tuber-bearing Solanum. These 2x, 4x, and 6x species are from Mexico, and Central and South America. The determination of 2n pollen-producing plants was conducted using acetocarmine glycerol. Plants with more than 1% large-size pollen were regarded as 2n pollen-producing plants. 2n pollen-producing plants were identified in the following species: 10 out of 12 Mexican 2x species, seven of nine South American 2x species, seven of seven Mexican and Central American 4x species, five of five South American 4x species, and five of five Mexican 6x species. The frequency of 2n pollen-producing plants varied among species at the same ploidy level, but the range of frequency, generally between 2 and 10% among species, was similar over different ploidy levels. The general occurrence of 2n pollen in both 2x and polyploid species, which are evolutionarily related, is evidence that the mode of polyploidization in tuber-bearing Solanums is sexual polyploidization. Furthermore, the frequencies of 2n pollen-producing plants in autogamous disomic polyploid species were not markably different from those of their related diploid species. It is thought that the frequent occurrence of 2n gametes with autogamy tends to disturb the fertility and consequently reduce fitness of polyploids. Thus, we propose that the breeding behavior of polyploids and the occurrence of 2n gametes may be genetically balanced in order to conserve high fitness in polyploid species in tuberbearing Solanum.Paper No. 3114 from the Laboratory of Genetics. Research supported by the College of Agriculture and Life Sciences; International Potato Center; USDA, SEA, CGRO 84-CRCR-1-1389; and Frito Lay, Inc.     

Tuning cellular responses to BMP-2 with material surfaces

Bone morphogenetic protein 2 (BMP-2) has been known for decades as a strong osteoinductive factor and for clinical applications is combined solely with collagen as carrier material. The growing concerns regarding side effects and the importance of BMP-2 in several developmental and physiological processes have raised the need to improve the design of materials by controlling BMP-2 presentation. Inspired by the natural cell environment, new material surfaces have been engineered and tailored to provide both physical and chemical cues that regulate BMP-2 activity. Here we describe surfaces designed to present BMP-2 to cells in a spatially and temporally controlled manner. This is achieved by trapping BMP-2 using physicochemical interactions, either covalently grafted or combined with other extracellular matrix components. In the near future, we anticipate that material science and biology will integrate and further develop tools for in vitro studies and potentially bring some of them toward in vivo applications.