Manufacture of liposomes by isopropanol injection: characterization of the method

Unilamellar liposomes are conventionally prepared by rapid injection of an ethanolic solution of lipids into an aqueous medium. The aim of the present study was to control, more efficiently, vesicle diameter by using an alternative solvent. The results show that isopropanol injection is a good alternative to ethanol injection for the manufacture of liposomes. Particle size can be controlled by the variation of process parameters, such as stirring speed of the aqueous phase and injection flow rate of lipid-isopropanol solution. Diameter of vesicles obtained by this method is less affected by the nature of phospholipid, as well as lipid concentration, than in the ethanol-injection process. In addition, the vesicles are generally smaller (approximately 40–210?nm). Accurate characterization of the particles, by fluorescence, ³¹P-NMR, and cryo–transmission electron microscopy, showed that particles are formed of a single lipid bilayer around an aqueous cavity. We thus provide the scientific community with a fully characterized alternative method to produce unilamellar vesicles.     

Ethanol injection method for hydrophilic and lipophilic drug-loaded liposome preparation

In this article, a hydrophobic (beclomethasone dipropionate; BDP) and a hydrophilic (cytarabine; Ara-C) drugs have been encapsulated in liposomes in order to be administered via the pulmonary route. For this aim, a liposome preparation method, which is easy to scale up, the ethanol injection method, has been selected. The effects of critical process and formulation parameters have been investigated. The drug-loaded liposomes were prepared and characterized in terms of size, zeta potential, encapsulation efficiency, release study, cell uptake, and aerodynamic behavior. Small multilamellar vesicles, with sizes ranging from about 80 to 170?nm, were successfully obtained. Results indicated a significant influence of phospholipid and cholesterol amounts on liposome size and encapsulation efficiency. The higher encapsulation efficiencies were about 100% for the hydrophobic drug (BDP) and about 16% for the hydrophilic one (Ara-C). The in vitro release study showed a prolonged release profile for BDP, in contrast with Ara-C, which was released more rapidly. The cell-uptake test revealed that fluorescent liposomes have been well internalized into the cytoplasm of SW-1573 human lung carcinoma cells, confirming the possibility to use liposomes for lung cell targeting. Nebulized Ara-C and BDP liposomes presented aerodynamic diameters compatible with deep lung deposition. In conclusion, the elaborated liposomes seem to be promising carriers for both Ara-C and BDP pulmonary delivery.     

Cutting xylem under tension or supersaturated with gas can generate PLC and the appearance of rapid recovery from embolism

We investigated the common assumption that severing stems and petioles under water preserves the hydraulic continuity in the xylem conduits opened by the cut when the xylem is under tension. In red maple and white ash, higher percent loss of conductivity (PLC) in the afternoon occurred when the measurement segment was excised under water at native xylem tensions, but not when xylem tensions were relaxed prior to sample excision. Bench drying vulnerability curves in which measurement samples were excised at native versus relaxed tensions showed a dramatic effect of cutting under tension in red maple, a moderate effect in sugar maple, and no effect in paper birch. We also found that air injection of cut branches (red and sugar maple) at pressures of 0.1 and 1.0 MPa resulted in PLC greater than predicted from vulnerability curves for samples cut 2 min after depressurization, with PLC returning to expected levels for samples cut after 75 min. These results suggest that sampling methods can generate PLC patterns indicative of repair under tension by inducing a degree of embolism that is itself a function of xylem tensions or supersaturation of dissolved gases (air injection) at the moment of sample excision. Implications for assessing vulnerability to cavitation and levels of embolism under field conditions are discussed.     

Crystal structure of the capsular polysaccharide synthesizing protein CapE of Staphylococcus aureus

Enzymes synthesizing the bacterial CP (capsular polysaccharide) are attractive antimicrobial targets. However, we lack critical information about the structure and mechanism of many of them. In an effort to reduce that gap, we have determined three different crystal structures of the enzyme CapE of the human pathogen Staphylococcus aureus. The structure reveals that CapE is a member of the SDR (short-chain dehydrogenase/reductase) super-family of proteins. CapE assembles in a hexameric complex stabilized by three major contact surfaces between protein subunits. Turnover of substrate and/or coenzyme induces major conformational changes at the contact interface between protein subunits, and a displacement of the substrate-binding domain with respect to the Rossmann domain. A novel dynamic element that we called the latch is essential for remodelling of the protein–protein interface. Structural and primary sequence alignment identifies a group of SDR proteins involved in polysaccharide synthesis that share the two salient features of CapE: the mobile loop (latch) and a distinctive catalytic site (MxxxK). The relevance of these structural elements was evaluated by site-directed mutagenesis.     

The comparison of immune-enhancing activity of sulfated polysaccharidses from Tremella and Condonpsis pilosula

Based on our previous research, four sulfated polysaccharide (sPSs) from Tremella and Condonpsis pilosula, sTPS_tp, sTPS_70c, sCPPS_tp and sCPPS_50c, were prepared and their effects on splenic lymphocytes proliferation in vitro and the immune response of ND vaccine in chicken were compared taking the unmodified polysaccharide (uPS) TPS_tp as control. The results showed that four sPSs could significantly or numerically stimulate splenic lymphocyte proliferation singly or synergistically with LPS in vitro, sTPS_70c and sCPPS_tp demonstrated better effect; promote peripheral lymphocytes proliferation and enhance serum HI antibody titer in chickens vaccinated with ND vaccine, the actions of sPSs were stronger than that of uPS, and sTPS_70c at medium dosage presented the best efficacy. These indicated that sulfation modification could improve the immune-enhancing activity of TPS and CPPS, sTPS_70c possessed the strongest activity and would be expected as a component of new-type immunopotentiator.     

响应面分析法优化当归粗多糖提取工艺

选取岷县当归药材为原料,采用水提醇沉法进行多糖提取,以当归粗多糖得率为指标,探讨加水量、回流提取时间、水提液的浓缩比、醇沉后所达含醇比例对当归多糖得率的影响。在单因素分析的基础上,采用响应面分析法(RSM)确定了当归粗多糖最佳提取条件为:加水量837.6 mL/100 g,浓缩后溶液体积为228.12 mL,最终含乙醇浓度为65.80%,回流提取时间2 h,在此条件下预测当归粗多糖得率理论的最佳值为10.44%,实际验证值为10.40%,两者相符,说明RSM法分析的可靠性。     

Polarographic Studies on Fat-soluble Vitamins in Nonaqueous Media

Vitamin D₂ and vitamin D_s gave a single reduction-wave, respectively, in polarography in acetonitrile containing 0.05 M-tetrabutylammonium iodide. The eduction-wave of vitamin D_s was indistinguishable from that of vitamin D₂, whose half-wave potentials were evaluated identically at -2.1₀ V vs. Hg. Proportionalities between wave-height and concentration were held in the concentration range fronl 4× 10^-4 M (ca. 6000 IU·ml^-1) to 1.2×10 M (ca. 18000 IUD·ml^-1)

In both cases, the conjugated three double-bond system may be reduced to two double-bond system, which corresponds to the third reduction-step of vitamin A.

Ergosterol which has a conjugated two double-bond system and an isolated double-bond gave no reduction-wave under the present conditions.     

A Growth Factor for Malo-lactic Fermentation Bacteria

A growth factor (TJF) for a malo-lactic fermentation bacterium has been isolated from tomato juice, and found to be a β-glucoside. The NMR spectra of TJF and its acetate revealed that the glucosyl residue linked to the hydroxyl group at C-2′ or C-4′ of d- or l-pantothenic acid moiety. Then, 2′-O-(β-d-glucopyranosyl)-dl-pantothenic acid (I), 4′-O-(β-d-glucopyranosyl)-dl-pantothenic acid (II) and 4′-O-(β-d-glucopyranosyl)-d(R)-pantothenic acid (II-a) were synthesized, and Il-a and 4′-O-(β-d-glucopyranosyl)-l-pantothenic acid (II-b) were obtained by the optical resolution of the acetate of II. Among the above compounds, II-a was identical with natural TJF regarding to the biological activity, NMR and ORD spectra, and thin-layer chromatography.     

Purification,Crystallization and Properties of Tryptophanase from Proteus rettgeri

An inducible tryptophanase was crystallized from the cell extract of Proteus rettgeri grown in a medium containing l-tryptophan. The purification procedure included ammonium sulfate fractionation, heat treatment, DEAE-Sephadex and hydroxylapatite column chromatographies. Crystals were obtained from solutions of the purified enzyme by the addition of ammonium sulfate.

The crystalline enzyme preparation was homogeneous by the criteria of ultracentrifugation and zone electrophoresis. The molecular weight was determined to be approximately 210,000.

The crystalline enzyme catalyzed the degradation of l-tryptophan into indole, pyruvate and ammonia in the presence of added pyridoxal phosphate. The enzyme also catalyzed pyruvate formation from 5-hydroxy-l-tryptophan, 5-methyl-l-tryptophan, S-methyl-l-cysteine and l- cysteine. l-, d-Alanine, l-phenylalanine and indole inhibited pyruvate formation from these substrates.