Combined control of Lasioderma serricorne (F.) and Ephestia elutella (Hbn.) in a tobacco processing facility by attracticide method

Results on application of attracticide method in the combined control of cigarette beetle, Lasioderma serricorne and tobacco moth, Ephestia elutella, infesting a tobacco processing facility are reported. Experimental devices with cross-panel stripes treated with microencapsulated permethrin at 6% (a.i.) and baited at same time with (4,6-dimethyl-7-hydroxynonan-3-one) serricornin and (Z,E)-9,12-tetradecadien-1 ol acetate (TDA) were used for 2 years (2017 and 2018) in an Italian tobacco processing facility. The experiment demonstrated that the presence of both serricornin and TDA dispensers on cross-panel striped devices had no affect on the numbers of L. serricorne and E. elutella male adults caught. After 2 years, the densities of adult males were clearly suppressed in room treated with attracticide compared to control room. Thus, the 2017–2018 experiment suggests that attracticide devices with two pheromone lures and microencapsulated permethrin at 6% (a.i.) can be effective suppression tools for managing combined pest populations of L. serricorne and E. elutella in tobacco facilities. The reduction of male infestation by L. serricorne ranged from 36% to 87%, and in E. elutella, the reduction of infestation ranged from 63% to 91%.     

新生儿胆汁淤积症患儿肠道菌群与分娩方式及喂养方式的关系

目的分析新生儿胆汁淤积症患儿肠道菌群特征及其与分娩方式、喂养方式的关系。方法选择2018年6月至2019年6月我院收治的40例新生儿胆汁淤积症患儿作为观察组,选择同期入院的120例健康新生儿作为对照组,比较两组对象肠道菌群分布情况。各组对象进一步按不同喂养方式分为母乳喂养组和混合喂养组,按不同分娩方式分为阴道分娩组和剖宫产组,分析各组新生儿肠道菌群与分娩方式、喂养方式的相关性。结果观察组新生儿粪便中双歧杆菌、乳杆菌数量及双歧杆菌/大肠埃希菌值[(7.53±0.57)lg copies/g、(8.12±0.71)lg copies/g、1.06±0.18]明显少于对照组[(9.58±0.64)lg copies/g、(8.64±0.75)lg copies/g、1.39±0.22],大肠埃希菌数量[(7.28±0.85)lg copies/g]明显多于对照组[(6.81±0.63)lg copies/g]。观察组中,阴道分娩与剖宫产分娩患儿粪便中双歧杆菌、乳杆菌、大肠埃希菌数量及双歧杆菌/大肠埃希菌值差异均有统计学意义(P0.05)。观察组中,母乳喂养与混合喂养新生儿粪便中双歧杆菌、乳杆菌、大肠埃希菌数量及双歧杆菌/大肠埃希菌值差异均有统计学意义(P0.05)。结论新生儿胆汁淤积症患儿肠道菌群存在异常,且受到分娩方式和喂养方式的影响。     

Effect of host plant on cornucopia of mango fruit flies (Diptera: Tephritidae) and their triumphant management in context of climate change

A study was performed to assess the preference of fourteen mango cultivars for fruit flies and their management by bagging. So the choice of Tephritid flies to mango cultivars during fruiting phase is crucial. Fourteen different cultivars of mango viz., ‘Dusehri’, ‘Malda’, ‘Langra’ early cultivars, ‘Chaunsa’, ‘Fajri Klan’, ‘Sensation’ medium whereas ‘Sanglakhi’, ‘Retaul-12’, ‘Mehmood Khan’, ‘Tukhmi’, ‘Kala Chaunsa’, ‘Chitta Chaunsa’, ‘Dai Wala’ and ‘Sobey De Ting’ late cultivars were assessed for their suitability for fruit flies. The results indicate that the population density of fruit flies was higher on late cultivars like ‘Sanglakhi’ (20.61 percent), ‘Mehmood Khan’ (20.22 percent) and ‘Reutal-12’ (19.92 percent) were proved to be highly susceptible to fruit flies. Among these the cultivar ‘Reutal-12’ was selected being commercial and future cultivar for the management of fruit flies through bagging. The results reported that the attack of tephritid fruit flies and other insect pests were zero in bagged fruits as compared with control. It was further recorded that the bagged fruits has maximum average fruit weight i.e. 203.50 and 197.83 g per fruit was noted in those treatments where butter paper bag and brown paper bag was wrapped with better coloration as compared with un-bagged fruit with 159.5 g per fruit. Similarly, on an average fruit length were more i.e. 90.17, 91.33 mm in bagged fruit and 85.33 in un-bagged fruits. Furthermore, bagged fruits have zero incidence of disease with reduced fruit crack, fruit sunburn, mechanical damage, bird damage, fruit blemished and agrochemical residues on the fruit. So, it is concluded that the special attention should be given on ‘Reutal-12’ for the management of fruit flies when devising an IPM program for the control of fruit flies. Further, bagging has proved to be the good agricultural practices for the production of quality mango.     

The molecular mechanisms and factors affecting the feeding habits of silkworm (Lepidoptera: Bombyxidae)

Food is critical to the survival and development of insects. Bombyx mori (Lepidoptera: Bombycidae), a Lepidoptera model insect with economic significance, is a well-known oligophagous insect that mainly feeds on mulberry leaves. The feeding characteristics of this particular species provide an excellent model for studying the food selection of insect host plants. In recent years, there has been an increasing number of studies on the factors affecting the feeding of silkworms, especially with the development of molecular technology. Many mysteries have been gradually solved. This paper summarizes and discusses the factors that affect the feeding of silkworms, with a focus on the molecular mechanisms of silkworm feeding. It is hoped that this work will be helpful for further research on artificial diets for silkworms and disease control in lepidopteran insects.     

Ageing Effect Evaluation on HD-sEMG Signals Using CCA Approach

ObjectivesThe objective of the proposed study is to exploit the technology of high-density surface electromyography (HD-sEMG), in order to evaluate the muscle activation in young and elderly subjects during a daily life gesture, namely, Sit To Stand (STS), using wireless connected ambulatory equipment (TMSi©) and Blind Source Separation (BSS) approach with Canonical Correlation Analysis (CCA).Materials and methodsSixteen subjects participated (50% females) divided into two categories (‘H1’: young (30.62 yrs ±5.92, 23.95 kg/m² ±3.08), versus ‘H2’: old (61.87 yrs ±7.98, 23.4 kg/m² ±3.38)), in the recording of HD-sEMG signals, using 32-electrodes square grids (4×8), during Sit To Stand (STS) motion, three times at spontaneous speed. The studied muscle is the Rectus Femoris (RF) muscle. The recorded HD-sEMG signals were analyzed with CCA approach to extract correlation coefficient sets according to two age categories (young versus old), in order to evaluate its discriminating power with ageing. Statistical tests (t-test) were used to evaluate the discrimination for these two categories.ResultsThe calculation of CCA correlation coefficients showed a significant difference between young and old category concerning the mean CCA correlation coefficient (P<0.001***) and also the standard deviation of the CCA correlation coefficients (P<0.0001****).ConclusionThe obtained results are promising and indicate a clear difference between the obtained source variability using CCA method between the young and the old tested subjects during daily life motion. Furthermore, these estimated sources seem to be impacted by both anatomical and functional modifications with ageing.     

The effects of hydrocarbon pollution from a two‐stroke outboard engine on the feeding behaviour of Lythrypnus dalli (Perciformes: Gobidae)

Feeding behaviour (time of attack on flake fish food) in Lythrypnus dalli was measured under pollution concentrations of 2.1 and 4.01mgl^?1 total extractable material produced by a two‐stroke outboard engine. The variance of the times increased in pollution versus control treatments for both concentrations. No significant difference was found between the mean times of the control and 2.1 mgl^?1 pollution treatments. A significant difference was found between the mean times of the control and pollution treatments for two different tests at 4.01 mgl^?1. The combination of the increase in mean time of food attack and the increase of variance indicates that pollution concentrations lower than LD50 levels change feeding behaviour, and thus may indirectly effect the survival of the organism.     

CFD analysis of the Ahmed Glaucoma Valve and design of an alternative device

Computational fluid dynamics (CFD) modelling based on a commercial package, FLUENT, has been used in the present study. The primary aim of this study is to develop a novel implant by employing CFD techniques. Firstly, CFD analyses on the best design commercially available, which is the Ahmed Glaucoma Valve (AGV^®), are accomplished. In the light of the results, the new design focus is selected as the valve. The new design is analysed using GAMBIT and FLUENT software. CFD analyses of the new design and the AGV^® are compared and the strengths of the new design are revealed. The results are also compared with the experimental studies AGV^® in the literature. It is deduced that the proposed model shows a nonlinear pressure drop response, which is quite similar to that of AGV^®. The optimum combination would be a flow rate of 2.5 μl/min and a pressure drop of 1054.58 Pa for the proposed model.     

Characterisation and simulation of an active microvalve for glaucoma

Glaucoma drainage device (GDD) has the potential to eliminate hypotony but still suffers from poor flow control and fibrosis. The ideal shunt should change its hydraulic resistance to achieve the desired intraocular pressure (IOP). In this study, the characterisation of a preliminary design of a new GDD is presented. This is activated by means of a diaphragm, which is actuated by conducting polymers. The valve can be manufactured employing microelectromechanical system technology by soft lithography. The characterisation process is performed by numerical simulation using the finite element method, considering the coupling between the fluid and the structure (diaphragm) obtaining the hydraulic resistance for several positions of the diaphragm. To analyse the hydraulic system of the microvalve implanted in a human eye, an equivalent circuit model was used. The parameters of the equivalent circuit model were obtained from numerical simulation. The hydraulic resistance of the designed GDD varies in the range of 13.08–0.36 mmHg min/μl compared with 3.38–0.43 mmHg min/μl for the Ahmed valve. The maximum displacement of the diaphragm in the vertical direction is 18.9 μm, and the strain in the plane is 2%. The proposed preliminary design allows to control the IOP by varying the hydraulic resistance in a greater range than the existing passive valves, and the numerical simulation facilitates the characterisation and the improvement of the design before its construction, reducing time and costs.     

Preliminary simulation model toward the study of the effects caused by different mandibular advancement devices in OSAS treatment

Abstract

The paper aims to evaluate the effects caused by a Mandibular Advancement Device (MAD) for Obstructive Sleep Apnoea Syndrome (OSAS) treatment. This study is based on Finite Element Method (FEM) for evaluating the load distribution on temporomandibular joint, especially on the mandibular condyle and disc, and on periodontal ligaments. The stress values on condyle and periodontal ligaments lead authors to consider MAD a safe procedure even for a long period. The obtained results also show the relationship between MAD material and load distribution at the periodontal ligaments. The paper is a step toward future analyses for studying and comparing the effects of MAD features, such as material, shape and dimensions, in order to allow the clinician prescribing the most fitting device.     

Geometrical optimisation of a biochip microchannel fluidic separator

This article reports on the geometric optimisation of a T-shaped biochip microchannel fluidic separator aiming to maximise the separation efficiency of plasma from blood through the improvement of the unbalanced separation performance among different channel bifurcations. For this purpose, an algebraic analysis is firstly implemented to identify the key parameters affecting fluid separation. A numerical optimisation is then carried out to search the key parameters for improved separation performance of the biochip. Three parameters, the interval length between bifurcations, the main channel length from the outlet to the bifurcation region and the side channel geometry, are identified as the key characteristic sizes and defined as optimisation variables. A balanced flow rate ratio between the main and side channels, which is an indication of separation effectiveness, is defined as the objective. It is found that the degradation of the separation performance is caused by the unbalanced channel resistance ratio between the main and side channel routes from bifurcations to outlets. The effects of the three key parameters can be summarised as follows: (a) shortening the interval length between bifurcations moderately reduces the differences in the flow rate ratios; (b) extending the length of the main channel from the main outlet is effective for achieving a uniformity of flow rate ratio but ineffective in changing the velocity difference of the side channels and (c) decreasing the lengths of side channels from upstream to downstream is effective for both obtaining a uniform flow rate ratio and reducing the differences in the flow velocities between the side branch channels. An optimisation process combining the three parameters is suggested as this integration approach leads to fast convergent process and also offers flexible design options for satisfying different requirements.