Prairie grass phytolith hardness and the evolution of ungulate hypsodonty

Silica phytoliths in grasses are thought to serve as a defence mechanism against grazing ungulates by causing excessive tooth wear. It is posited that they contributed to the evolution of hypsodonty in these animals. However, some have questioned whether grass phytoliths can abrade enamel. Here Mohs hardness testing was conducted on Blue Grama grass (Bouteloua gracilis) to determine phytolith hardness. Microindentation was performed on horse and American bison molars to establish dental constituent hardness values. To infer the phytoliths' abrasion capacity, the hardness values were contrasted. Phytolith hardness ranged from 18.0 to 191.5 HV. This is considerably softer than the values obtained for ungulate enamel, which range from 332.6 to 363.4 HV, but harder than the other dental constituents. Although Blue Grama phytoliths are incapable of directly abrading enamel, when viewed in conjunction with other data on phytolith hardness, there is considerable variation across grass species and some phytoliths are actually harder than ungulate enamel. Blue Grama grass phytoliths may even promote enamel wear due to pressure accentuation caused by the recession of softer tissues. Given these findings and considerations, it is plausible phytoliths served an integral role in the co-evolution of grasses and herbivorous ungulates, although more testing is needed to bear this out.     

Functional tooth units and nutritional status of older people in care homes in Indonesia

Gerodontology 2012; doi: 10.1111/j.1741‐2358.2012.00673.x Functional tooth units and nutritional status of older people in care homes in Indonesia Objectives: To investigate the relationship between functional tooth units (FTUs) and nutritional status. Methods: One hundred females (mean age: 72.4 ± 8.2 years) at four private care homes in Jakarta, Indonesia were interviewed and clinically examined. The oral examination included the assessment of teeth, prosthetic status, and number of FTUs. The total number of FTUs was further divided by tooth composition: natural tooth against natural tooth (NN‐FTUs), natural tooth against denture (ND‐FTUs), and denture against denture (DD‐FTUs). Nutritional status was evaluated using the body mass index (BMI) and the Mini Nutritional Assessment (MNA). Results: The mean numbers of teeth present, NN‐FTUs, ND‐FTUs, DD‐FTUs, and total FTUs were 13.1 ± 10.4, 1.7 ± 3.0, 1.2 ± 3.3, 0.4 ± 1.2 and 3.3 ± 4.4, respectively. The mean BMI and MNA scores were 24.8 ± 5.0 and 22.6 ± 2.8, respectively. Subjects with a normal BMI had a significantly higher total number of FTUs (3.6 ± 4.6) compared with underweight subjects (0.1 ± 0.3). Subjects with a normal MNA had a significantly higher number of NN‐FTU (2.6 ± 3.7) compared to those who were at risk or in a state of under‐nutrition (1.2 ± 2.4). Conclusion: This study revealed significant relationships between the number of FTUs and nutritional status. Keeping the posterior occlusion should be emphasized in order to maintain good nutritional status in older subjects.     

The Central Projections of the Monkey Tooth Pulp Afferent Neurons

Transganglionic transport of horseradish peroxidase conjugated to wheatgerm agglutinin (HRP:WGA) entrapped in hypoallergenic polyacrylamide gel was used to study the patterns of termination of primary afferents that innervate the upper and lower tooth pulps within the trigeminal sensory nuclear complex (TSNC) of the monkey. HRP:WGA injections were also made into the lower incisors and molars, in order to examine the topographic arrangement of pulpal afferent projections. HRP-labeled pulpal afferents innervating lower and upper teeth projected ipsilaterally to the rostral subnucleus dorsalis (Vpd) and caudal subnucleus ventralis (Vpv) of the nucleus principalis (Vp); the rostrodorsomedial (Vo.r) and dorsomedial (Vo.dm) subdivisions of the nucleus oralis (Vo); the dorsomedial subdivision of the nucleus interpolaris (Vi); and laminae I—II and/or V of the nucleus caudalis (Vc) at its rostralmost level. The HRP-labeled terminals from upper and lower pulpal afferents formed a rostrocaudal column from the midlevel of Vp to the rostral tip of Vc. The label in Vp and Vo was considerably dense, but the column of terminals was interrupted at the Vpd-Vpv transition. The label in Vi and Vc was much less dense compared to that in the rostral nuclei, and the column of terminals was interrupted frequently. The representation of the upper and lower teeth in TSNC was organized in a somatotopic fashion that varied from one subdivision to the next, though their terminal zones overlapped within Vpd. The upper and lower teeth were represented in Vpv, Vo.r, Vo.dm, Vi, and Vc in a ventrodorsal, dorsoventral, lateromedial, lateromedial, and lateromedial sequence, respectively. Topographic arrangement was also noticed for the projections of pulpal afferents from the lower incisors and molars: The representations of the lower incisors and molars in Vpv, Vo.r, Vo.dm, Vi, and Vc were organized in a lateromedial, dorsoventral, ventrodorsal, ventrodorsal, and lateromedial sequence, respectively. The present results indicating sparse projections from pulpal afferents in the monkey's Vc are in good correspondence with a clinical report that trigeminal tractotomy just rostral to the obex has no significant effect on dental pain perception in patients. Furthermore, the present study indicates that projection patterns of pulpal afferents—which include the termination sites, the density of terminations between nuclei, and topographic arrangement—differ among animal species.     

Msx1 Gene Variant - its Association in Isolated Hypodontia: A Case Control Genetic study!!!

INTRODUCTION:

Non-syndromic tooth agenesis is a congenital anomaly with significant medical, psychological, and social ramifications. There is sufficient evidence to hypothesize that locus for this condition can be identified by candidate genes.

AIM OF THE STUDY:

The aim of this study was to test whether MSX1 671 T > C gene variant was involved in etiology of non-syndromic tooth agenesis in Raichur patients.

MATERIALS AND METHODS:

Blood samples were collected with informed consent from 50 subjects having non-syndromic tooth agenesis and 50 controls. Genomic deoxyribonucleic acid (DNA) was extracted from the blood samples, polymerase chain reaction (PCR) was performed, and restriction fragment length polymorphism (RFLP) was performed for digestion products that were evaluated.

RESULTS:

The results showed positive correlation between MSX1671 T > C gene variant and non-syndromic tooth agenesis in Raichur patients.

CONCLUSION:

MSX1 671 T > C gene variant may be a good screening marker for non-syndromic tooth agenesis in Raichur patients.     

小哺乳动物化石牙齿釉质碳、氧同位素测试方法简介及应用前景

探讨古环境和古气候变化与哺乳动物演化之间的关系是目前古生物学研究领域中的一个热点,而哺乳动物化石牙齿釉质的碳、氧同位素分析是恢复古环境和古气候的一个重要手段。以往的哺乳动物化石牙齿釉质稳定同位素分析多集中在大哺乳动物化石,这主要是受到技术手段的限制,所需的样品量较大所决定的。但最近几年随着激光和离子显微探针技术的应用,对小哺乳动物化石(如啮齿类和兔形类)的牙齿釉质碳、氧同位素的分析和应用日趋成熟和广泛。除了传统的化学处理方法之外,对小哺乳动物化石牙齿釉质碳、氧同位素的分析还有以下三种方法:1)激光剥蚀气相色谱/同位素比值质谱分析;2)直接激光氟化技术;3)离子显微探针技术(SHRIMPII)。这些技术需要的样品量少,对标本的破损小,准确度和精密度高,所以在小哺乳动物化石和一些珍贵标本(如古人类化石)的稳定同位素分析中起到了重要作用。相对于大哺乳动物化石,小哺乳动物化石数量多、演化速度快,更能反映多个层位长时间序列的古环境和气候变化;而且小哺乳动物通常没有长距离迁徙的行为,栖息地局限,所以更能准确反映化石埋藏地点的古环境和气候状况。     

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including Pristionchus pacificus display complex behaviors, the most striking of which is the predation of other nematode larvae. However, as these behaviors are absent in the model organism Caenorhabditis elegans, they have thus far only recently been described in detail along with the development of reliable behavioral assays ¹. These predatory behaviors are dependent upon phenotypically plastic but fixed mouth morphs making the correct identification and categorization of these animals essential. In P. pacificus there are two mouth types, the stenostomatous and eurystomatous morphs ², with only the wide mouthed eurystomatous containing an extra tooth and being capable of killing other nematode larvae. Through the isolation of an abundance of size matched prey larvae and subsequent exposure to predatory nematodes, assays including both "corpse assays" and "bite assays" on correctly identified mouth morph nematodes are possible. These assays provide a means to rapidly quantify predation success rates and provide a detailed behavioral analysis of individual nematodes engaged in predatory feeding activities. In addition, with the use of a high-speed camera, visualization of changes in pharyngeal activity including tooth and pumping dynamics are also possible.     

Computer simulation of orthodontic tooth movement using CT image-based voxel finite element models with the level set method

Orthodontic tooth movement (OTM) is an adaptive biomechanical response of dentoalveolar components to orthodontic forces, in which remodeling of the alveolar bone occurs in response to changes in the surrounding mechanical environment. In this study, we developed a framework for OTM simulation by combining an image-based voxel finite element method, with a surface-tracking level set method using three-dimensional computer models. For a case study to demonstrate its capability of expressing clinical tooth movement, we observed displacement and rotation of the tooth under three types of force conditions. The simulation results demonstrate that the proposed simulation method has the potential to predict clinical OTM.     

Comparison of methods to determine the centre of resistance of teeth

In orthodontic treatment, the locations of the centre of resistance (CR) of individual teeth and the applied load system are the major determinants for the type of tooth movement achieved. Currently, CR locations have only been specified for a relatively small number of tooth specimen for research purposes. Analysing cone beam computed tomography data samples from three upper central incisors, this study explores whether the effort to establish accurate CR estimates can be reduced by (i) morphing a pre-existing simplified finite element (FE) mesh to fit to the segmented 3D tooth-bone model, and (ii) individualizing a mean CR location according to a small parameter set characterising the morphology of the tooth and its embedding. The FE morphing approach and the semi-analytical approach led to CR estimates that differ in average only 0.04 and 0.12 mm respectively from those determined by very time-consuming individual FE modelling (standard method). Both approaches may help to estimate the movement of individual teeth during orthodontic treatment and, thus, increase the therapeutic efficacy.     

Comparison of stress distribution in dental crown with different cusp angles: 3D finite element analysis

The purpose of this study is to measure the failure risk of a crown depending on the cusp angle. Three all-ceramic crown models consisting of C_H (high incline), C_M (middle incline), and C_L (low incline) are designed. Stress is applied to the crown with Loading case-1 (top of cusp tip) and Loading case-2 (middle of cusp ridge) with the use of FEA software. In Loading case-1 and case-2, the C_H showed the highest Maximum Principal Stress (MPS) while the CL showed the lowest MPS. The cusp angle is an influential factor affecting stress distribution in dental crowns.