毛竹茎秆叶绿体超微结构及其发射荧光光谱特征

为了探讨毛竹（Phyllostachys pubescens）茎秆的光合特性,以1龄和3龄毛竹为材料,观察了茎秆和叶中叶绿体的超微结构,测定了光合色素含量以及发射荧光光谱。结果表明：茎秆中叶绿体发育完整,其类囊体垛叠程度高于叶,并含有淀粉粒。茎秆中叶绿素总含量、类胡萝卜素及Chla／b含量显著低于叶（FI〈O．05）。茎秆发射荧光光谱在735nm处没有明显的主峰,1龄和3龄毛竹茎秆光系统lI与光系统I的半峰宽比值分别比叶降低了7．0％和11．3％（P〈0．05）,峰高比值比叶分别增加了6．5％和18．3％（P〈0．05）。四阶导数光谱在650—800nm波长范围内出现了6个极大值,代表LHCII、CP43、CP47、RCI和ILHCI的发射荧光峰以及PSI和PSII的发射荧光副振峰：其中,茎秆中RCI和LHCI特征发射荧光峰与叶相比有不同程度的红移。表明毛竹茎秆叶绿体通过提高Chlb的相对含量和增加类囊体垛叠以及降低LHCI含量,来适应毛竹茎秆以红光为主的光环境。进而协调激发能在2个光系统间的分配。     

胃肝样腺癌的临床病理特征

目的探讨胃肝样腺癌（hepatoid adenocarcinoma of the stomach,HAS）的临床病理学特点、发生机制和免疫组化特征,以提高诊断水平。方法收集并分析5例胃肝样腺癌的临床特征和病理资料,采用HE染色、免疫组化方法,并复习文献。结果组织学胃肝样腺癌具有管状腺癌、粘液性癌和肝样分化腺癌的移行过渡,肿瘤细胞呈小梁状、巢团状,间质为丰富的血窦。免疫表型胃肝样腺癌AAT（5／5）、ACT（5／5）、CEA（5／5）、AFP（4／5）均为阳性,Heppar1灶性阳性（2／5）。结论胃肝样腺癌是一种少见的高度恶性、侵袭性强的特殊类型胃癌,组织学呈肝细胞样腺癌,免疫表型AFP、AAT和ACT阳性有助诊断。     

甲藻分类历史沿革及中国近海部分甲藻分类地位修订

甲藻自发现至今已有200多年的历史.一方面,甲藻的分类地位越来越受到学者的重视;另一方面,随着研究的深入,出现了越来越多的争议和困惑,在一定程度上阻碍了甲藻分类学的发展.本文简述了国内外甲藻分类研究的历史沿革,主要介绍了几次较大的分类地位的变革.另外,目前中国近海甲藻的分类体系与国际上通用的分类体系还有很多差异,为了更好地促进国内甲藻的分类学研究,方便国际间的合作与交流,我们对国际国内的甲藻分类体系(分别以algaeBASE数据库和《中国海洋生物名录》为代表)进行比较,发现目水平上的分类体系基本相同,但在科、属的划分上有很多差异.针对这些差异点查阅文献,寻根溯源,最终提出了一个较为合理的划分.本文所作的主要调整有:将凯伦藻属(Karenia)、卡罗藻属(Karlodinium)和塔卡藻属(Takay ama)3个属从裸甲藻科(Gymnodiniaceae)中分出,单独成凯伦藻科(Kareniaceae);角藻属(Ceratium)中的大部分海洋种改为新角藻属(Neoceratium);亚历山大藻属(Alexandrium)从屋甲藻科(Goniodomataceae)中分出,归入膝沟藻科(Gonyaulacaceae);取消异沟藻科(Heteraulacus),由屋甲藻科取而代之;成立2个新目,即尖尾藻目(Oxyrrhinales)和梨甲藻目(Pyrocystales).     

联苯菊酯降解菌株BF-3的分离筛选、鉴定和降解特性

【背景】联苯菊酯是人工合成的类似天然除虫菊素的一种仿生杀虫剂,近年来被广泛应用于农业病虫害的防治。联苯菊酯化学性质较稳定,在环境中的残留期长,是我国出口果蔬、茶叶中残留较严重的农药之一。微生物降解具有降解速度快、无二次污染等优点,被认为是有效去除农药残留的绿色生产技术。【方法】通过富集驯化,从农药厂排污口的污泥中筛选分离能够降解联苯菊酯的菌株,经形态学观察、生理生化特性测定及16SrRNA序列分析对其进行鉴定,通过单因素试验对菌株的降解特性进行研究。【结果】分离到1株联苯菊酯的降解菌株BF-3。菌株BF-3为革兰氏阳性菌,被鉴定为蜡状芽孢杆菌;该菌株在联苯菊酯质量浓度为100mg·L^-1的无机盐液体培养基（MSM）中呈现s型生长,7d后对联苯菊酯的降解率达到87．9％。单因素试验表明,菌株最适降解条件为pH7．0、30oC,初始菌株D600am=1．0。【结论与意义】蜡状芽孢杆菌BF．3能够有效降解联苯菊酯,在环境中联苯菊酯残留的生物修复方面具有应用潜力。     

浙江西门岛海洋特别保护区大型底栖动物功能群特征及其与环境的关系

为研究浙江西门岛海洋特别保护区大型底栖动物功能群的变化规律及其与环境因子的关系,作者分别于2010年4月(春季)、11月(秋季),2011年8月(夏季)和2012年2月(冬季)进行了4个航次的大型底栖动物调查,共鉴定出大型底栖动物78种,根据其食性类型划分为浮游生物食者、植食者、肉食者、杂食者、碎屑食者5种功能群.各功能群平均密度从高到低依次为浮游生物食者＞肉食者＞植食者＞碎屑食者＞杂食者,平均生物量从高到低依次为浮游生物食者＞碎屑食者＞肉食者＞杂食者＞植食者.单因素方差分析结果表明,大型底栖动物各功能群的密度和生物量季节间均无显著性差异.典范对应分析结果表明,影响大型底栖动物功能群的主要环境因子包括温度、溶解氧、溶解态无机磷和表层沉积物的中值粒径,排序轴对功能群-环境关系的贡献率计算结果表明环境变量可以较好地解释功能群的变化情况.     

甲酸乙酯对松材线虫的熏蒸效果

【背景】在溴甲烷面临禁用的情形下,探讨新熏蒸剂甲酸乙酯对松材线虫的处理效果,可以科学地评估甲酸乙酯的使用前景。【方法】采用松材线虫分离液和带疫松木段,设置甲酸乙酯5个剂量梯度、5个处理温度和5个处理时间,测定其对松材线虫的毒力及CT值。【结果】在25℃下处理3、6、12、24、48h,甲酸乙酯对松材线虫的Lc50分别为2．63、1．60、0．99、0．41、0．20mg·L-1。温度对毒力有显著影响,在10～29℃,随温度升高,甲酸乙酯对松材线虫的毒力降低,19和29℃下,1．85mg·L-1甲酸乙酯处理松材线虫的死亡率分别为63％和100％。甲酸乙酯熏蒸12h内,能完全杀灭木段中的松材线虫。在23℃下处理6和12h,松材线虫死亡率达到99％时,甲酸乙酯的cr值分别为453．94和424．14mg·h-1·L-1。【结论与意义】甲酸乙酯可用于松材线虫的检疫处理。     

大鼠骨骼肌损伤后中性粒细胞、巨噬细胞和肌成纤维细胞数量分析研究

目的 研究大鼠骨骼肌损伤后中性粒细胞、巨噬细胞和肌成纤维细胞数量的变化情况,为今后骨骼肌损伤修复的病理学机制研究打下坚实的基础.方法 建立大鼠骨骼肌机械性损伤动物模型,随机分为伤后6h、12h、1d、3d、7d、10d、14d及正常对照组.应用免疫组织荧光染色和免疫组织化学染色,检测大鼠骨骼肌损伤后不同时间点中性粒细胞、巨噬细胞和肌成纤维细胞的数量.结果 伤后6h-12h,损伤区可见中性粒细胞和巨噬细胞浸润,中性粒细胞数量达到高峰.伤后1d,损伤区巨噬细胞数量急剧增加,迅速达到高峰,而中性粒细胞数量开始下降.伤后3d,中性粒细胞和巨噬细胞数量都显著下降.伤后7d,肌成纤维细胞开始出现.到伤后10d-14d,损伤区主要以肌成纤维细胞为主,偶见巨噬细胞.结论 大鼠骨骼肌损伤区中性粒细胞、巨噬细胞和肌成纤维细胞数量呈时间规律性变化,以期为骨骼肌损伤修复的病理学机制研究提供参考资料.     

A highly sensitive and selective optical sensor for Pb(2+) by using conjugated polymers and label-free oligonucleotides

The detection of Pb(2+) with DNA-based biosensor is usually susceptible to severe interference from Hg(2+) because of the T-Hg(2+)-T interaction between Hg(2+) and T residues. In this study, we developed a rapid, sensitive, selective and label-free sensor for the detection of Pb(2+) in the presence of Hg(2+) based on the Pb(2+)-induced G-quadruplex formation with cationic water-soluble conjugated polymer (PMNT) as a "polymeric stain" to transduce optical signal. We selected a specific sequence oligonucleotide, TBAA (5'-GGAAGGTGTGGAAGG-3'), which can form a G-quadruplex structure upon the addition of Pb(2+). This strategy provided a promising alternative to Pb(2+) determination in the presence of Hg(2+) instead of the universal masking agents of Hg(2+) (such as CN(-), SCN(-)). Based on this observation, a simple "mix-and-detect" optical sensor for the detection of Pb(2+) was proposed due to the distinguishable optical properties of PMNT-ssDNA and PMNT-(G-quadruplex) complexes. By this method, we could identify micromolar Pb(2+) concentrations within 5min even with the naked eye. Furthermore, the detection limit was improved to the nanomolar range by the fluorometric method. We also successfully utilized this biosensor for the determination of Pb(2+) in tap water samples.     

Immunosensor based on magnetic relaxation switch and biotin-streptavidin system for the detection of Kanamycin in milk

A rapid, sensitive, and simple immunosensor was developed for the detection of Kanamycin (KM) in milk. This immunosensor is based on magnetic relaxation switch (MRS) assay and biotin-streptavidin system (B-SA system). The target analyte (KM) competed with those on the surface of the superparamagnetic iron oxide (SPIO) nanoparticles and hence affected the formation of SPIO aggregates. The dispersed and aggregated states of SPIO can modulate the spin-spin relaxation time (T(2)) of the neighboring water molecule. T(2) was then changed as an effect of the target analyte. The B-SA system was used to amplify the SPIO binding, thus enhance the sensitivity. The detection working was 1.5 to 25.2ngmL(-1) and limit of detection (LOD) was determined to be 0.1ngmL(-1). The LOD of the immunosensor decreased tenfold, and its analysis time (45min) was much shorter than that of enzyme-linked immunosorbent assay (6h to 8h). The average recoveries of the KM at various spiking levels ranged from 80.2% to 85.6% with a relative standard deviation (RSD) below 4.0%. The results showed that the MRS immunosensor was a promising platform for the determination of small molecular residues because of its high sensitivity, specificity, homogeneity, and speed.     

One-step electrochemically co-assembled redox-active [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid film for non-redox protein biosensors

A redox-active [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs (bpy=2,2'-bipyridine, tatp=1,4,8,9-tetra-aza-triphenylene, BSA=bovine serum albumin, SWCNTs=single-walled carbon nanotubes) hybrid film is fabricated on an indium-tin oxide (ITO) electrode via one-step electrochemical co-assembly approach. BSA is inherently dispersive and therefore served as the linking mediator of SWCNTs, which facilitate the redox reactions of [Ru(bpy)(2)(tatp)](2+) employed as a reporter of BSA. The evidences from differential pulse voltammetry, cyclic voltammetry, scanning electron microscope, emission spectroscopy and fluorescence microscope reveal that the [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid can be electrochemically co-assembled on the ITO electrode, showing two pairs of well-defined Ru(II)-based redox waves. Furthermore, the electrochemical co-assembly of the [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid is found to be strongly dependent on the simultaneous presence of BSA and SWCNTs, indicating a good linear response to BSA in the range from 6 to 50mgL(-1). The results from this study provide an electrochemical co-assembly method for the development of non-redox protein biosensors.