Energy Demands of Nitrogen Supply in Mass Cultivation of Two Commercially Important Microalgal Species, <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Dunaliella tertiolecta</Emphasis>

Mass culture of microalgae is a potential alternative to cultivation of terrestrial crops for bioenergy production. However, microalgae require nitrogen fertiliser in quantities much higher than plants, and this has important consequences for the energy balance of these systems. The effect of nitrogen fertiliser supplied to microalgal bubble-column photobioreactor cultures was investigated using different nitrogen sources (nitrate, urea, ammonium) and culture conditions (air, 12% CO₂). In 20 L cultivations, maximum biomass productivity for Chlorella vulgaris cultivated using nitrate and urea was 0.046 and 0.053 g L⁻¹ day⁻¹, respectively. Maximum biomass productivity for Dunaliella tertiolecta cultivated using nitrate, urea and ammonium was 0.033, 0.038 and 0.038 g L⁻¹ day⁻¹, respectively. In intensive bubble-column photobioreactors using 12% CO₂, maximum productivity reached 0.60 and 0.83 g L⁻¹ day⁻¹ for C. vulgaris and D. tertiolecta, respectively. Recycling of nitrogen within the photobioreactor system via algal exudation of nitrogenous compounds and bacterial activity was identified as a potentially important process. The energetic penalty incurred by supply of artificial nitrogen fertilisers, phosphorus, power and CO₂ to microalgal photobioreactors was investigated, although analysis of all energy burdens from biomass production to usable energy carriers was not conducted. After subtraction of the power, nitrogen and phosphorus energy burdens, maximum net energy ratios for C. vulgaris and D. tertiolecta cultivated in bubble columns were 1.82 and 2.10. Assuming CO₂ was also required from a manufactured source, the net energy ratio decreased to 0.09 and 0.11 for C. vulgaris and D. tertiolecta, so that biomass production in this scenario was unsustainable. Although supply of nitrogen is unlikely to be the most energetically costly factor in sparged photobioreactor designs, it is still a very significant penalty. There is a need to optimise both cultivation strategies and recycling of nitrogen in order to improve performance. Data are supported by measurements including biochemical properties (lipid, protein, heating value) and bacterial number by epifluorescence microscopy.     

Simultaneous flue gas bioremediation and reduction of microalgal biomass production costs

A flue gas originating from a municipal waste incinerator was used as a source of CO₂ for the cultivation of the microalga Chlorella vulgaris, in order to decrease the biomass production costs and to bioremediate CO₂ simultaneously. The utilization of the flue gas containing 10–13% (v/v) CO₂ and 8–10% (v/v) O₂ for the photobioreactor agitation and CO₂ supply was proven to be convenient. The growth rate of algal cultures on the flue gas was even higher when compared with the control culture supplied by a mixture of pure CO₂ and air (11% (v/v) CO₂). Correspondingly, the CO₂ fixation rate was also higher when using the flue gas (4.4 g CO₂ l⁻¹ 24 h⁻¹) than using the control gas (3.0 g CO₂ l⁻¹ 24 h⁻¹). The toxicological analysis of the biomass produced using untreated flue gas showed only a slight excess of mercury while all the other compounds (other heavy metals, polycyclic aromatic hydrocarbons, polychlorinated dibenzodioxins and dibenzofurans, and polychlorinated biphenyls) were below the limits required by the European Union foodstuff legislation. Fortunately, extending the flue gas treatment prior to the cultivation unit by a simple granulated activated carbon column led to an efficient absorption of gaseous mercury and to the algal biomass composition compliant with all the foodstuff legislation requirements.     

Factors affecting lipid accumulation by <Emphasis Type="Italic">Nannochloropsis oculata</Emphasis> in a two-stage cultivation process

Reserve lipids of microalgae are promising for biodiesel production. However, optimization of cultivation conditions for both biomass yield and lipid production of microalgae is a contradictory problem because required conditions for both targets are different. In this study, a two-stage cultivation strategy is proposed to enhance lipid production of the microalga Nannochloropsis oculata. Biomass growth and lipid production were carried out in two separate and non-interacting stages. In first-stage cultivation, microalgae were cultivated in optimal conditions for cell growth. Then, microalgae were harvested and transferred into a growth-limited environment, thus enhancing lipid production of microalgae. Here, optimization of the lipid production stage (second stage) with respect to different levels of inoculum concentration, salinity of culture broth, and intensity of irradiance was performed. The results show that irradiance exhibits a significant influence on lipid production. The highest lipid productivity of 0.324 g L⁻¹ day⁻¹ was obtained with an inoculum concentration of 2.3 g L⁻¹, a salinity of 35 g L⁻¹, and an irradiance of 500 μmol photons m⁻² s⁻¹. The final yield of lipid obtained from the two-stage process was 2.82-times higher than that from traditional single-stage batch cultivation systems.     

Utilization of flue gas for cultivation of microalgae <Emphasis Type="Italic">Chlorella</Emphasis> sp.) in an outdoor open thin-layer photobioreactor

Flue gas generated by combustion of natural gas in a boiler was used for outdoor cultivation of Chlorella sp. in a 55 m² culture area photobioreactor. A 6 mm thick layer of algal suspension continuously running down the inclined lanes of the bioreactor at 50 cm s⁻¹ was exposed to sunlight. Flue gas containing 6–8% by volume of CO₂ substituted for more costly pure CO₂ as a source of carbon for autotrophic growth of algae. The degree of CO₂ mitigation (flue gas decarbonization) in the algal suspension was 10–50% and decreased with increasing flue gas injection rate into the culture. A dissolved CO₂ partial pressure (pCO₂) higher than 0.1 kPa was maintained in the suspension at the end of the 50 m long culture area in order to prevent limitation of algal growth by CO₂. NO_X and CO gases (up to 45 mg m⁻³ NO_X and 3 mg m⁻³ CO in flue gas) had no negative influence on the growth of the alga. On summer days the following daily net productivities of algae [g (dry weight) m⁻²] were attained in comparative parallel cultures: flue gas = 19.4–22.8; pure CO₂ = 19.1–22.6. Net utilization (η) of the photosynthetically active radiant (PAR) energy was: flue gas = 5.58–6.94%; pure CO₂ = 5.49–6.88%. The mass balance of CO₂ obtained for the flue gas stream and for the algal suspension was included in a mathematical model, which permitted the calculation of optimum flue gas injection rate into the photobioreactor, dependent on the time course of irradiance and culture temperature. It was estimated that about 50% of flue gas decarbonization can be attained in the photobioreactor and 4.4 kg of CO₂ is needed for production of 1 kg (dry weight) algal biomass. A scheme of a combined process of farm unit size is proposed; this includes anaerobic digestion of organic agricultural wastes, production and combustion of biogas, and utilization of flue gas for production of microalgal biomass, which could be used in animal feeds. A preliminary quantitative assessment of the microalgae production is presented.     

Production of Cold-Adapted Amylase by Marine Bacterium <Emphasis Type="Italic">Wangia</Emphasis> sp. C52: Optimization,Modeling, and Partial Characterization

The aim of this work was to optimize the fermentation parameters in the shake-flask culture of marine bacterium Wangia sp. C52 to increase cold-adapted amylase production using two statistical experimental methods including Plackett–Burman design, which was applied to find the key ingredients for the best medium composition, and response surface methodology, which was used to determine the optimal concentrations of these components. The results showed starch, tryptone, and initial pH had significant effects on the cold-adapted amylase production. A central composite design was then employed to further optimize these three factors. The experimental results indicated that the optimized composition of medium was 6.38 g L⁻¹ starch, 33.84 g L⁻¹ tryptone, 3.00 g L⁻¹ yeast extract, 30 g L⁻¹ NaCl, 0.60 g L⁻¹ MgSO₄ and 0.56 g L⁻¹ CaCl₂. The optimized cultivation conditions for amylase production were pH 7.18, a temperature of 20°C, and a shaking speed of 180 rpm. Under the proposed optimized conditions, the amylase experimental yield (676.63 U mL⁻¹) closely matched the yield (685.60 U mL⁻¹) predicted by the statistical model. The optimization of the medium contributed to tenfold higher amylase production than that of the control in shake-flask experiments.     

Production of ��-poly-l-lysine using a novel two-stage pH control strategy by Streptomyces sp. M-Z18 from glycerol

The production of ε-poly-l-lysine (ε-PL) by Streptomyces sp. M-Z18 from glycerol was investigated in a 5-L jar-fermenter. Batch fermentations by Streptomyces sp. M-Z18 at various pH values ranging from 3.5 to 4.5 were studied. Based on the analysis of the time course of specific cell growth rate and specific ε-PL formation rate, a novel two-stage pH control strategy was developed to improve ε-PL production by shifting the culture pH from 3.5 to 3.8 after 36 h of cultivation. By applying the strategy, the maximal ε-PL concentration and productivity had a significant improvement and reached 9.13 g L⁻¹ and 4.76 g L⁻¹ day⁻¹, respectively, compared with those in one-stage pH control process where the pH value is controlled at 3.5 (7.83 g L⁻¹ and 3.13 g L⁻¹ day⁻¹). Fed-batch fermentation with two-stage pH control strategy was also applied to produce ε-PL; final ε-PL concentration of 30.11 g L⁻¹ was obtained, being 3.3-fold greater than that of batch fermentation. To our knowledge, it is the first report on production of ε-PL from glycerol in fermenter scale and achievement of high ε-PL production with two-stage pH control strategy.     

Cost-benefit relationships in sclerophyllous leaves of the ‘Bana’ vegetation in the Amazon region

This study estimated the construction const (CC) and maintenance cost (MC) of leaf tissue on the basis of dry mass (CC_Mass, MC_Mass) and leaf area (CC_Area, MC_Area), as well as the maximum leaf gas exchange capacity, so as to examine leaf cost:benefit relationship in six dominant species of the ‘Bana’ vegetation. Minimum and maximum CC_Mass averaged 1.71 ± 0.03 and 1.78 ± 0.03 g glucose g⁻¹. The CC_Mass showed a statistically significant positive correlation with crude fibre, and tended to decline as leaves were larger. Thus, smaller leaves tended to be built out of a more expensive material than that found in species bearing larger leaves. The average CC_Area of the ‘Bana’ species was 376 ± 15 g glucose m⁻². A robust correlation was found between CC_Area with leaf dry mass to leaf area ratio, as well as with leaf thickness, but not with leaf density. MC_Mass (g glucose g⁻¹ day⁻¹) and MC_Area (g glucose m⁻² day⁻¹⁾ were positively correlated. Maximum and minimum MC_Mass increased significantly with protein and lipid content, respectively. Maximum carbon assimilation (A _max) was positively correlated with CC_Area. All the species operated at high stomatal conductance (g _s) and C _i/C _a which suggested low short-term water use efficiency. Potential nitrogen use efficiency (PNUE = A _max/N) averaged 35.4 ± 1.8 mmol CO₂ mol⁻¹ N. As the sclerophylly index (g crude fibre g⁻¹ protein) increased, the ratio of CC_Area to A _max increased significantly. This result suggests a trade-off between investments in an expensive resistant sclerophyllous leaf which should maximize carbon gain in the long term.     

A process for the production of ectoine and poly(3-hydroxybutyrate) by <Emphasis Type="Italic">Halomonas boliviensis</Emphasis>

The paper reports a study involving the use of Halomonas boliviensis, a moderate halophile, for co-production of compatible solute ectoine and biopolyester poly(3-hydroxybutyrate) (PHB) in a process comprising two fed-batch cultures. Initial investigations on the growth of the organism in a medium with varying NaCl concentrations showed the highest level of intracellular accumulation of ectoine (0.74 g L⁻¹) at 10–15% (w/v) NaCl, while at 15% (w/v) NaCl, the presence of hydroxyectoine (50 mg L⁻¹) was also noted. On the other hand, the maximum cell dry weight and PHB concentration of 10 and 5.8 g L⁻¹, respectively, were obtained at 5–7.5% (w/v) NaCl. A process comprising two fed-batch cultivations was developed—the first culture aimed at obtaining high cell mass and the second for achieving high yields of ectoine and PHB. In the first fed-batch culture, H. boliviensis was grown in a medium with 4.5% (w/v) NaCl and sufficient levels of monosodium glutamate, NH₄⁺, and PO₄³⁻. In the second fed-batch culture, the NaCl concentration was increased to 7.5% (w/v) to trigger ectoine synthesis, while nitrogen and phosphorus sources were fed only during the first 3 h and then stopped to favor PHB accumulation. The process resulted in PHB yield of 68.5 wt.% of cell dry weight and volumetric productivity of about 1 g L⁻¹ h⁻¹ and ectoine concentration, content, and volumetric productivity of 4.3 g L⁻¹, 7.2 wt.%, and 2.8 g L⁻¹ day⁻¹, respectively. At salt concentration of 12.5% (w/v) during the second cultivation, the ectoine content was increased to 17 wt.% and productivity to 3.4 g L⁻¹ day⁻¹.     

Phytoplankton production after the collapse of the Larsen A Ice Shelf,Antarctica

Part of the Larsen A Ice Shelf (64°15′S to 74°15′S) collapsed during January 1995. A first oceanographic and biological data set from the newly free waters was obtained during December 1996. Typical shelf waters with temperatures near and below the freezing point were found. A nutrient-rich water mass (max: PO₄ ³⁻ 1.80 μmol L⁻¹ and NO₃ ⁻ 27.64 μmol L⁻¹) was found between 70 and 200 m depth. Chlorophyll-a (Chl-a) values (max 14.24 μg L⁻¹) were high; surface oxygen saturation ranged between 86 and 148%. Diatoms of the genera Nitzschia and Navicula and the prymnesiophyte Phaeocystis sp. were the most abundant taxa found. Mean daily primary production (Pc) estimated from nutrient consumption was 14.80 ± 0.17 mgC m⁻³ day⁻¹. Pc was significantly correlated with total diatom abundance and Chl-a. Calculated ΔpCO₂ (difference of the CO₂ partial pressure between surface seawater and the atmosphere) was –30.5 μatm, which could have contributed to a net CO₂ flux from the atmosphere to the sea and suggests the area has been a CO₂ sink during the studied period. High phytoplankton biomass and production values were found in this freshly open area, suggesting its importance for biological CO₂ pumping.     

Production of lipids in 10 strains of Chlorella and Parachlorella, and enhanced lipid productivity in Chlorella vulgaris

We tested 10 different Chlorella and Parachlorella strains under lipid induction growth conditions in autotrophic laboratory cultures. Between tested strains, substantial differences in both biomass and lipid productivity as well as in the final content of lipids were found. The most productive strain (Chlorella vulgaris CCALA 256) was subsequently studied in detail. The availability of nitrates and/or phosphates strongly influenced growth and accumulation of lipids in cells by affecting cell division. Nutrient limitation substantially enhanced lipid productivity up to a maximal value of 1.5 g l⁻¹ day⁻¹. We also demonstrated the production of lipids through large-scale cultivation of C. vulgaris in a thin layer photobioreactor, even under suboptimal conditions. After 8 days of cultivation, maximal lipid productivity was 0.33 g l⁻¹ day⁻¹, biomass density was 5.7 g l⁻¹ dry weight and total lipid content was more than 30% dry weight. C. vulgaris lipids comprise fatty acids with a relatively high degree of saturation compared with canola oil offering a possible alternative to the use of higher plant oils.     

Sucrose regulated enhanced induction of anthraquinone,phenolics, flavonoids biosynthesis and activities of antioxidant enzymes in adventitious root suspension cultures of <Emphasis Type="Italic">Morinda citrifolia</Emphasis> (L.)

The effect of initial sucrose concentration was investigated in root suspension cultures of Morinda citrifolia to improve root growth and secondary metabolites production, i.e. anthraquinone, phenolics and flavonoids. Besides, oxidative stress level, antioxidant enzymes activity and membranes damage under different sucrose concentration were estimated. A 5% sucrose supply was shown to be optimal for the production of root dry mass, but higher sucrose concentrations of 7–9% inhibited the accumulation of root dry weight (DW). However, the maximum production of anthraquinone (251.89 g L⁻¹ DW), phenolics (165.14 g L⁻¹ DW) and flavonoids (163.56 g L⁻¹ DW) were achieved at 1% sucrose-treated culture, which may be a source carbon skeletons for secondary metabolism. At the same time was observed low oxidative damage, which could be associated with high levels of secondary metabolites and the increased activity of catalase. Although, catalase (CAT) activity were stimulated at 7–9% sucrose-treated cultures, high accumulation of hydrogen peroxide (H₂O₂) and peroxidation of lipid (MDA) was induced. The observed high activity of CAT and guaiacol peroxidase (G-POD) were not sufficient enough to mitigate the toxic effect of H₂O₂.     

Utilization of <Emphasis Type="Italic">Anabaena</Emphasis> sp. in CO<Subscript>2</Subscript> removal processes

This paper focuses on modelling the growth rate and exopolysaccharides production of Anabaena sp. ATCC 33047, to be used in carbon dioxide removal and biofuels production. For this, the influence of dilution rate, irradiance and aeration rate on the biomass and exopolysaccharides productivity, as well as on the CO₂ fixation rate, have been studied. The productivity of the cultures was maximum at the highest irradiance and dilution rate assayed, resulting to 0.5 g_bio l⁻¹ day⁻¹ and 0.2 g_eps l⁻¹ day⁻¹, and the CO₂ fixation rate measured was 1.0 gCO₂ l⁻¹ day⁻¹. The results showed that although Anabaena sp. was partially photo-inhibited at irradiances higher than 1,300 μE m⁻² s⁻¹, its growth rate increases hyperbolically with the average irradiance inside the culture, and so does the specific exopolysaccharides production rate. The latter, on the other hand, decreases under high external irradiances, indicating that the exopolysaccharides metabolism hindered by photo-damage. Mathematical models that consider these phenomena have been proposed. Regarding aeration, the yield of the cultures decreased at rates over 0.5 v/v/min or when shear rates were higher than 60 s⁻¹, demonstrating the existence of thus existence of stress damage by aeration. The behaviour of the cultures has been verified outdoors in a pilot-scale airlift tubular photobioreactor. From this study it is concluded that Anabaena sp. is highly recommended to transform CO₂ into valuable products as has been proved capable of metabolizing carbon dioxide at rates of 1.2 gCO₂ l⁻¹ day⁻¹ outdoors. The adequacy of the proposed equations is demonstrated, resulting to a useful tool in the design and operation of photobioreactors using this strain.     

Productivity correlated to photobiochemical performance of <Emphasis Type="Italic">Chlorella</Emphasis> mass cultures grown outdoors in thin-layer cascades

This work aims to: (1) correlate photochemical activity and productivity, (2) characterize the flow pattern of culture layers and (3) determine a range of biomass densities for high productivity of the freshwater microalga Chlorella spp., grown outdoors in thin-layer cascade units. Biomass density, irradiance inside culture, pigment content and productivity were measured in the microalgae cultures. Chlorophyll-fluorescence quenching was monitored in situ (using saturation-pulse method) to estimate photochemical activities. Photobiochemical activities and growth parameters were studied in cultures of biomass density between 1 and 47 g L⁻¹. Fluorescence measurements showed that diluted cultures (1–2 g DW L⁻¹) experienced significant photostress due to inhibition of electron transport in the PSII complex. The highest photochemical activities were achieved in cultures of 6.5–12.5 g DW L⁻¹, which gave a maximum daylight productivity of up to 55 g dry biomass m⁻² day⁻¹. A midday depression of maximum PSII photochemical yield (F _v/F _m) of 20–30% compared with morning values in these cultures proved to be compatible with well-performing cultures. Lower or higher depression of F _v/F _m indicated low-light acclimated or photoinhibited cultures, respectively. A hydrodynamic model of the culture demonstrated highly turbulent flow allowing rapid light/dark cycles (with frequency of 0.5 s⁻¹) which possibly match the turnover of the photosynthetic apparatus. These results are important from a biotechnological point of view for optimisation of growth of outdoor microalgae mass cultures under various climatic conditions.     

Modeling growth and photosynthetic response in <Emphasis Type="Italic">Arthrospira platensis</Emphasis> as function of light intensity and glucose concentration using factorial design

Combined effect of light intensity and glucose concentration on Arthrospira platensis growth and photosynthetic response was evaluated using a 3² factorial design. This design was carried out with light levels of 50, 100, and 150 μmol photons m⁻² s⁻¹ and glucose concentrations of 0.5, 1.5, and 2.5 g L⁻¹. Results from the response surface methodology were that the highest level of light intensity and glucose concentration improved biomass (1.33 g L⁻¹), maximum specific growth rate (0.49 day⁻¹), and net photosynthetic rate (139.89 μmol O₂ mg Chl⁻¹ h⁻¹). Furthermore, the interaction of both factors showed that at low light, glucose had a low effect on maximum biomass and maximal net photosynthetic rate. However, at the highest light levels, the effect of glucose was more sensitive and the increase of glucose concentration increased the levels of all responses. The rates of the instantaneous relative growth, net photosynthesis, and dark respiration of growth cultures showed two different phases in mixotrophic condition. The first was distinguished by the preponderance of the photoautotrophic mode; the second was based mainly on photoheterotrophy.     

Production of hexanoic acid from d-galactitol by a newly isolated Clostridium sp. BS-1

In a study screening anaerobic microbes utilizing d-galactitol as a fermentable carbon source, four bacterial strains were isolated from an enrichment culture producing H₂, ethanol, butanol, acetic acid, butyric acid, and hexanoic acid. Among these isolates, strain BS-1 produced hexanoic acid as a major metabolic product of anaerobic fermentation with d-galactitol. Strain BS-1 belonged to the genus Clostridium based on phylogenetic analysis using 16S rRNA gene sequences, and the most closely related strain was Clostridium sporosphaeroides DSM 1294^T, with 94.4% 16S rRNA gene similarity. In batch cultures, Clostridium sp. BS-1 produced 550 ± 31 mL L⁻¹ of H₂, 0.36 ± 0.01 g L⁻¹ of acetic acid, 0.44 ± 0.01 g L⁻¹ of butyric acid, and 0.98 ± 0.03 g L⁻¹ of hexanoic acid in a 4-day cultivation. The production of hexanoic acid increased to 1.22 and 1.73 g L⁻¹ with the addition of 1.5 g L⁻¹ of sodium acetate and 100 mM 2-(N-morpholino)ethanesulfonic acid (MES), respectively. Especially when 1.5 g L⁻¹ of sodium acetate and 100 mM MES were added simultaneously, the production of hexanoic acid increased up to 2.99 g L⁻¹. Without adding sodium acetate, 2.75 g L⁻¹ of hexanoic acid production from d-galactitol was achieved using a coculture of Clostridium sp. BS-1 and one of the isolates, Clostridium sp. BS-7, in the presence of 100 mM MES. In addition, volatile fatty acid (VFA) production by Clostridium sp. BS-1 from d-galactitol and d-glucose was enhanced when a more reduced culture redox potential (CRP) was applied via addition of Na₂S·9H₂O.     

Biomass production and nutrient uptake by <Emphasis Type="Italic">Neochloris oleoabundans</Emphasis> in an open trough system

The purpose of this paper is to present biomass and nutrient uptake data from Neochloris oleoabundans production in an open trough system. The growth medium used was BG11, temperature ranged from 16.7 °C to 25.3 °C, and pH ranged from 5.52 to 9.94 because the customary pH increase during algal biomass production was moderated by incoming CO₂ gas streams (atmospheric, 2%, 4%, and 6% CO₂). Peak concentrations of algal biomass ranged from 643 to 970 mg L⁻¹, specific growth rates ranged from 0.15 to 0.37 day⁻¹, and doubling times ranged from 4.8 to 1.9 days. Carbon, nitrogen, and phosphorus were incorporated into the biomass at 0.05%, 8.3%, and 54% of supplied amounts. Open growth systems supplemented with CO₂ should be designed to regulate medium pH within the range of 6.3 to 7.1. Future research should examine various media and alternative carbon sources to decrease doubling times, increase peak concentrations, and optimize nutrient uptake.     

Kinetics of ferrous iron oxidation by batch and continuous cultures of thermoacidophilic Archaea at extremely low pH of 1.1–1.3

The extreme acid conditions required for scorodite (FeAsO₄·2H₂O) biomineralization (pH below 1.3) are suboptimal for growth of most thermoacidophilic Archaea. With the objective to develop a continuous process suitable for biomineral production, this research focuses on growth kinetics of thermoacidophilic Archaea at low pH conditions. Ferrous iron oxidation rates were determined in batch-cultures at pH 1.3 and a temperature of 75°C for Acidianus sulfidivorans, Metallosphaera prunea and a mixed Sulfolobus culture. Ferrous iron and CO₂ in air were added as sole energy and carbon source. The highest growth rate (0.066 h⁻¹) was found with the mixed Sulfolobus culture. Therefore, this culture was selected for further experiments. Growth was not stimulated by increase of the CO₂ concentration or by addition of sulphur as an additional energy source. In a CSTR operated at the suboptimal pH of 1.1, the maximum specific growth rate of the mixed culture was 0.022 h⁻¹, with ferrous iron oxidation rates of 1.5 g L⁻¹ d⁻¹. Compared to pH 1.3, growth rates were strongly reduced but the ferrous iron oxidation rate remained unaffected. Influent ferrous iron concentrations above 6 g L⁻¹ caused instability of Fe²⁺ oxidation, probably due to product (Fe³⁺) inhibition. Ferric-containing, nano-sized precipitates of K-jarosite were found on the cell surface. Continuous cultivation stimulated the formation of an exopolysaccharide-like substance. This indicates that biofilm formation may provide a means of biomass retention. Our findings showed that stable continuous cultivation of a mixed iron-oxidizing culture is feasible at the extreme conditions required for continuous biomineral formation.     

Kinetics of CO conversion into H<Subscript>2</Subscript> by <Emphasis Type="Italic">Carboxydothermus hydrogenoformans</Emphasis>

The objective of this study was to improve the biological water–gas shift reaction for producing hydrogen (H₂) by conversion of carbon monoxide (CO) using an anaerobic thermophilic pure strain, Carboxydothermus hydrogenoformans. Specific hydrogen production rates and yields were investigated at initial biomass densities varying from 5 to 20 mg volatile suspended solid (VSS) L⁻¹. Results showed that the gas–liquid mass transfer limits the CO conversion rate at high biomass concentrations. At 100-rpm agitation and at CO partial pressure of 1 atm, the optimal substrate/biomass ratio must exceed 5 mol CO g⁻¹ biomass VSS in order to avoid gas–liquid substrate transfer limitation. An average H₂ yield of 94 ± 3% and a specific hydrogen production rate of ca. 3 mol g⁻¹ VSS day⁻¹ were obtained at initial biomass densities between 5 and 8 mg VSS⁻¹. In addition, CO bioconversion kinetics was assessed at CO partial pressure from 0.16 to 2 atm, corresponding to a dissolved CO concentration at 70°C from 0.09 to 1.1 mM. Specific bioactivity was maximal at 3.5 mol CO g⁻¹ VSS day⁻¹ for a dissolved CO concentration of 0.55 mM in the culture. This optimal concentration is higher than with most other hydrogenogenic carboxydotrophic species.     

Succinic acid production from sugarcane bagasse hemicellulose hydrolysate by <Emphasis Type="Italic">Actinobacillus succinogenes</Emphasis>

Succinic acid, a four-carbon diacid, has been the focus of many research projects aimed at developing more economically viable methods of fermenting sugar-containing natural materials. Succinic acid fermentation processes also consume CO₂, thereby potentially contributing to reductions in CO₂ emissions. Succinic acid could also become a commodity used as an intermediate in the chemical synthesis and manufacture of synthetic resins and biodegradable polymers. Much attention has been given recently to the use of microorganisms to produce succinic acid as an alternative to chemical synthesis. We have attempted to maximize succinic acid production by Actinobacillus succinogenes using an experimental design methodology for optimizing the concentrations of the medium components. The first experiment consisted of a 2⁴⁻¹ fractional factorial design, and the second entailed a Central Composite Rotational Design so as to achieve optimal conditions. The optimal concentrations of nutrients predicted by the model were: NaHCO₃, 10.0 g l⁻¹; MgSO₄, 3.0 g l⁻¹; yeast extract, 2.0 g l⁻¹; KH₂PO₄. 5.0 g l⁻¹; these were experimentally validated. Under the best conversion conditions, as determined by statistical analysis, the production of succinic acid was carried out in an instrumented bioreactor using sugarcane bagasse hemicellulose hydrolysate, yielding a concentration of 22.5 g l⁻¹.     

Carbon dynamics and budget in a Zoysia japonica grassland, central Japan

The ecosystem carbon budget was estimated in a Japanese Zoysia japonica grassland. The green biomass started to grow in May and peaked from mid-July to September. Seasonal variations in soil CO₂ flux and root respiration were mediated by changes in soil temperature. Annual soil CO₂ flux was 1,121.4 and 1,213.6 g C m⁻² and root respiration was 471.0 and 544.3 g C m⁻² in 2007 and 2008, respectively. The root respiration contribution to soil CO₂ flux ranged from 33% to 71%. During the growing season, net primary production (NPP) was 747.5 and 770.1 g C m⁻² in 2007 and 2008, respectively. The biomass removed by livestock grazing (GL) was 122.1 and 102.7 g C m⁻², and the livestock returned 28.2 and 25.6 g C m⁻² as fecal input (FI) in 2007 and 2008, respectively. The decomposition of FI (DL, the dry weight loss due to decomposition) was very low, 1.5 and 1.4 g C m⁻², in 2007 and 2008. Based on the values of annual NPP, soil CO₂ flux, root respiration, GL, FI, and DL, the estimated carbon budget of the grassland was 1.7 and 22.3 g C m⁻² in 2007 and 2008, respectively. Thus, the carbon budget of this Z. japonica grassland ecosystem remained in equilibrium with the atmosphere under current grazing conditions over the 2 years of the study.