技术与方法体外组装含有组蛋白变体H2A.Z及H3.3的核小体

核小体是构成真核生物染色质的基本结构单位,组蛋白变体H2A.Z及H3.3对染色质结构及基因转录过程发挥着重要的调控作用。体内研究核小体及染色质结构受到诸多因素限制,体外重构含有H2A.Z及H3.3的核小体结构是研究与组蛋白变体相关基因表达调控的重要方法之一。实验表达纯化了6种组蛋白,在复性的过程中装配了含有H2A.Z和H3.3的组蛋白八聚体。基于DNA序列10bp周期性及序列模体设计了3条易于形成核小体的DNA序列,通过PCR大量扩增的方法,回收了标记Cy3荧光分子的目的DNA序列。采用盐透析法体外组装了含有H2A.Z和H3.3的核小体结构,利用荧光标记、EB染色及考马斯亮蓝染色检测了含有组蛋白变体的核小体形成效率及形成过程的吉布斯自由能变化。结果发现,设计的3条DNA序列可以有效地组装形成含有组蛋白电梯的核小体结构,而且随着组蛋白八聚体与DNA比例的增加,核小体的形成效率显著提高;采用Cy3荧光标记可以灵敏且定量地计算组装过程的吉布斯自由能。该方法的建立对研究组蛋白变体相关的结构生物学及转录调控等具有一定的意义。     

体外组装含有组蛋白变体H2A.Z及H3.3的核小体

核小体是构成真核生物染色质的基本结构单位,组蛋白变体H2A.Z及H3.3对染色质结构及基因转录过程发挥着重要的调控作用。体内研究核小体及染色质结构受到诸多因素限制,体外重构含有H2A.Z及H3.3的核小体结构是研究与组蛋白变体相关基因表达调控的重要方法之一。实验表达纯化了6种组蛋白,在复性的过程中装配了含有H2A.Z和H3.3的组蛋白八聚体。基于DNA序列10bp周期性及序列模体设计了3条易于形成核小体的DNA序列,通过PCR大量扩增的方法,回收了标记Cy3荧光分子的目的 DNA序列。采用盐透析法体外组装了含有H2A.Z和H3.3的核小体结构,利用荧光标记、EB染色及考马斯亮蓝染色检测了含有组蛋白变体的核小体形成效率及形成过程的吉布斯自由能变化。结果发现,设计的3条DNA序列可以有效地组装形成含有组蛋白电梯的核小体结构,而且随着组蛋白八聚体与DNA比例的增加,核小体的形成效率显著提高;采用Cy3荧光标记可以灵敏且定量地计算组装过程的吉布斯自由能。该方法的建立对研究组蛋白变体相关的结构生物学及转录调控等具有一定的意义。     

一种从酵母细胞中提取组蛋白的方法

为了制备体外酵母DNA序列组装核小体所需的组蛋白,利用酸抽提方法从未经饥饿处理和经过不同时间饥饿处理的酿酒酵母细胞中分离组蛋白,经SDS-PAGE电泳分析和Bradford法测定蛋白浓度,发现抽提物中含有组蛋白H1、H2A、H2B、H3和H4,电泳条带位置正确、纯度较高,正常细胞的抽提物中蛋白总量达到158 μg/mL.试验结果表明该方法可以提取出较高质量的酿酒酵母组蛋白.     

酿酒酵母核小体定位理论模型的体外实验验证

核小体定位对真核生物基因表达调控发挥着重要作用。前期基于核小体核心及连接区域的k-mer频次分布偏好性,构建了位置权重矩阵算法,并在酿酒酵母基因组内较好地预测了核小体占据率。利用该理论模型,以1 bp碱基为步长、147 bp碱基为窗口,用该算法计算了酵母1号、3号、14号染色体上核小体形成能力强、中、弱各3条长度为147 bp的DNA序列,将这些片段克隆到重组质粒中,大量扩增回收9条标记biotin分子的目的序列。同时分别表达纯化了组蛋白H2A、H2B、H3和H4,复性后装配形成组蛋白八聚体结构。利用盐透析方法将9条DNA序列在体外组装形成核小体结构,经biotin标记检测后计算了反应过程的吉布斯自由能,对比了9条目的序列形成核小体的亲和力大小。研究发现,9条序列中有5条序列与理论预测完全符合,4条序列与理论预测不完全一致。实验结果与该算法预测的核小体定位结果基本一致,表明该理论模型能够有效预测酿酒酵母基因组核小体占据水平。     

酿酒酵母YPH499 Ⅲ号染色体上ARS形成核小体能力的比较

核小体定位是复制起始调控的重要因素,但是核小体定位是如何调控真核生物的复制起始,目前还不是很清楚。研究酵母Ⅲ号染色体上的不同活性复制起始序列形成核小体能力对探究真核生物DNA复制起始机制有着重要的生物学意义。酿酒酵母Ⅲ号染色体上的10个复制起始序列分为高活性和低活性两组复制起始序列,利用核小体体外组装技术,将回收纯化的高活性和低活性复制起始序列分别与组蛋白八聚体在体外进行梯度盐透析组装形成核小体,并进行Biotin标记检测,然后用Image J软件分析不同复制起始序列组装形成核小体能力的强弱。结果表明,用Image J软件对核小体组装能力强弱进行分析:ARS304ARS303ARS313ARS302ARS306ARS314,ARS305,ARS307,ARS309,ARS315。低活性复制起始序列较高活性复制起始序列更易形成核小体;复制起始位点偏好出现于核小体缺乏区。     

甲藻染色体在非细胞体系核重建过程中核小体的组装

利用纯化的原始真核生物寇氏隐甲藻（Crypthecodinium cohnii E.）染色体,使之与非洲爪蟾（Xenopus laevis L.）S期卵提取物温育,发现甲藻染色体经历了一系列去凝集、再凝集的形态变化,最后形成类似典型高等真核生物的间期核结构。小球菌核酸酶酶切分析表明,不具备组蛋白和核小体结构的甲藻染色体在非洲爪蟾卵提取物中进行了核小体装配,此过程与DNA序列本身、核膜以及核纤层蛋白（Lamin）是否存在无关,但部分拓扑异构酶Ⅱ（TopoⅡ）参与了这个过程,说明核小体的组装并非为核重建所必需,决定染色体高级结构的因素并不在DNA本身,而可能是非细胞体系中的组蛋白和非组蛋白。     

基于组蛋白甲基化信息的H2A.Z和H2A核小体识别

组蛋白H2A的变体H2A.Z在基因的表达过程中发挥着重要的作用。根据H2A.Z和H2A核小体中组蛋白甲基化修饰方式的不同,作者应用多样性增量二次判别方法(increment of diversity with quadratic discriminant,IDQD)成功地对H2A.Z和H2A核小体进行了识别,说明了以组蛋白甲基化信息作为特征参数的IDQD模型对H2A.Z和H2A核小体识别的有效性。通过计算DNA序列的柔性,发现H2A.Z核小体对应的DNA序列的平均柔性比常规H2A核小体对应的DNA序列的平均柔性弱。     

非细胞体系核重建并非必需核小体与染色质的装配

以质粒DNA在爪蟾卵提取物S- 1 5 0中进行核小体构建时形成的超螺旋结构检测核小体的形成 ;利用阳离子交换剂CM -Cellulose定量结合组蛋白H2A和H2B ;并结合小球菌核酸酶分析核小体的形成 ,研究了爪蟾去膜精子在去除H2A ,H2B的S- 1 5 0中的核重建过程 .结果表明CM -Cellulose可有效去除组蛋白并阻止质粒DNA的核小体构建和精子染色质的改建 .但处理后的S- 1 5 0与膜泡组分仍可诱导去膜精子进行体外核重建 ,进一步表明非细胞体系核重建与外源DNA长度无关 ;核小体及染色质的组装对于核重建并非必需 .     

基于DNA变形能的核小体定位预测方法研究进展

真核细胞中,作为染色质基本结构单元的核小体参与调控基因的转录、DNA复制、重组以及RNA剪接等诸多生物学过程。阐明核小体定位机制并准确预测核小体在染色体上的位置对解读染色质结构与功能有重要生物学意义。在过去30多年时间里,研究人员发展了多种预测核小体位置的方法。最理想的方法应考虑DNA序列、组蛋白修饰和染色质重塑等影响核小体定位的诸多因素,然而现实中,捕捉主要因素的模型也往往具有很高的鲁棒性和实用价值。DNA序列偏好性是在全基因组尺度上影响核小体定位的最重要因素之一,因此基于DNA序列的核小体定位预测方法也最常见。这种方法可大致分为两类,即基于DNA序列信息的生物信息学模型和基于DNA变形能的生物物理学模型。本文重点介绍生物物理学模型近些年取得的主要进展。     

荧光热漂移实验体外检测核小体的解聚

核小体是真核生物染色质的基本组成单元。核小体的解聚可以动态调控诸如DNA复制、转录、重组等以DNA为模板的生物学过程。特定荧光探针分子与蛋白质疏水残基结合后可被激发荧光信号。荧光热漂移（fluorescence thermal shift,FTS）是一种利用该原理检测温度上升时蛋白质变性过程的方法。本文以Widom 601序列为DNA模板,盐透析法体外装配核小体;分别在实时荧光定量PCR仪的VIC和TAMRA通道激发下,利用FTS检测了核小体在Tris-NaCl（TN）缓冲液和HEPES缓冲液中的解聚状态。研究结果发现,DNA对照序列在TN缓冲液中产生的背景噪声较大,VIC通道激发下组蛋白八聚体产生的荧光信号相对较强。FTS检测核小体的结果显示,随着温度的上升核小体的解聚过程分为2个阶段,～71℃和～84℃是核小体解聚速度最快的温度范围,而75℃～80℃是降解速度较慢的阶段。基于FTS基本原理,本研究发展了一种新颖的可用于检测核小体结构稳定性的方法,为核小体与染色质结构相关问题的研究奠定了一定的技术基础。     

Assembly and properties of chromatin containing histone H1

The Xenopus oocyte supernatant (oocyte S-150) forms chromatin in a reaction that is affected by temperature and by the concentration of ATP and Mg. Under optimal conditions at 27 degrees C, relaxed DNA plasmids are efficiently assembled into supercoiled minichromosomes with the endogenous histones H3, H4, H2A and H2B. This assembly reaction is a gradual process that takes four to six hours for completion. Micrococcal nuclease digestions of the chromatin assembled under these conditions generate an extended series of DNA fragments that are, on average, multiples of 180 base-pairs. We have examined the effect of histone H1 in this system. Exogenous histone H1, when added at a molar ratio of H1 to nucleosome of 1:1 to 5:1, causes an increase in the micrococcal nuclease resistance of the chromatin without causing chromatin aggregation under these experimental conditions. Furthermore, the periodically arranged nucleosomes display longer internucleosome distances, and the average length of the nucleosome repeat is a function of the amount of histone H1 added, when this histone is present at the onset of the assembly process. In contrast, no major change in the length of the nucleosome repeat is observed when histone H1 is added at the end of the chromatin assembly process. Protein analyses of the purified minichromosomes show that histone H1 is incorporated in the chromatin that is assembled in the S-150 supplemented with histone H1. The amount of histone H1 bound to chromatin is a function of the total amount of histone H1 added. We define here the parameters that generate histone H1-containing chromatin with native nucleosome repeats from 160 to 220 base-pairs, and we discuss the implications of these studies.     

New histone supply regulates replication fork speed and PCNA unloading

Correct duplication of DNA sequence and its organization into chromatin is central to genome function and stability. However, it remains unclear how cells coordinate DNA synthesis with provision of new histones for chromatin assembly to ensure chromosomal stability. In this paper, we show that replication fork speed is dependent on new histone supply and efficient nucleosome assembly. Inhibition of canonical histone biosynthesis impaired replication fork progression and reduced nucleosome occupancy on newly synthesized DNA. Replication forks initially remained stable without activation of conventional checkpoints, although prolonged histone deficiency generated DNA damage. PCNA accumulated on newly synthesized DNA in cells lacking new histones, possibly to maintain opportunity for CAF-1 recruitment and nucleosome assembly. Consistent with this, in vitro and in vivo analysis showed that PCNA unloading is delayed in the absence of nucleosome assembly. We propose that coupling of fork speed and PCNA unloading to nucleosome assembly provides a simple mechanism to adjust DNA replication and maintain chromatin integrity during transient histone shortage.     

Chromatin assembly: a basic recipe with various flavours

Packaging of eukaryotic genomes into chromatin is a hierarchical mechanism, starting with histone deposition onto DNA to produce nucleosome arrays, which then further fold and ultimately form functional domains. Recent studies provide interesting insight into how nucleosome assembly is coordinated with histone and DNA metabolism and underline the combined contribution of histone chaperones and chromatin remodelers. How these factors operate at a molecular level is a matter of current investigation. New data highlight the importance of histone dimers as deposition entities for de novo nucleosome assembly and identify dedicated machineries involved in histone variant deposition.     

Nucleosome Assembly Depends on the Torsion in the DNA Molecule: A Magnetic Tweezers Study

We have used magnetic tweezers to study nucleosome assembly on topologically constrained DNA molecules. Assembly was achieved using chicken erythrocyte core histones and histone chaperone protein Nap1 under constant low force. We have observed only partial assembly when the DNA was topologically constrained and much more complete assembly on unconstrained (nicked) DNA tethers. To verify our hypothesis that the lack of full nucleosome assembly on topologically constrained tethers was due to compensatory accumulation of positive supercoiling in the rest of the template, we carried out experiments in which we mechanically relieved the positive supercoiling by rotating the external magnetic field at certain time points of the assembly process. Indeed, such rotation did lead to the same nucleosome saturation level as in the case of nicked tethers. We conclude that levels of positive supercoiling in the range of 0.025-0.051 (most probably in the form of twist) stall the nucleosome assembly process.