Kinetic study of recycled newspaper liquefaction in polyol solvent

The kinetics of liquefaction of recycled newspaper was investigated. Liquefaction was carried out in the presence of polyhydric alcohols and ethylene carbonate under acidic conditions. The liquefaction yield was found to be a function of the solvent type, sulfuric acid concentration, temperature, and the ratio of solvent to newspaper. The total liquefaction rate and degradation rates of cellulose, hemicelluloses, and lignin, which are the major components of newspaper, were measured. From the results, it was found that the total liquefaction rate did not follow first order reaction kinetics, because of the difference in the degradation rate of each component and the condensation of lignin. The degradation rates of lignin and hemicellulose were approximately 13 and 7 times greater than that of cellulose, respectively.     

Optimization of furfural production from hemicellulose extracted from delignified palm pressed fiber using a two-stage process

This study aims to optimize the conditions for furfural production from hemicellulose extracted from delignified palm pressed fiber (dPPF) via two-stage process: acid hydrolysis followed by dehydration, using response surface methodology (RSM). The extracted hemicellulose contained 80.8% xylose. In order to convert hemicellulose to xylose in the acid hydrolysis step, there were four important parameters consisting of reaction temperature (100–150 °C), sulfuric acid concentration (1–10% v/v), ratio of sulfuric acid to hemicellulose (L/S ratio) (10, 9, and 8 v/w), and reaction time (30–120 min). The maximum xylose production (12.58 g/L) was achieved at 125 °C, 5.5% sulfuric acid, L/S ratio of 9 mL/g for 30 min with the determination coefficient (R²) value of 0.90. For the dehydration process, two parameters; reaction temperature (120–160 °C) and reaction time (30–150 min), were optimized. The maximum furfural production (8.67 g/L) was achieved at a reaction temperature of 140 °C for 90 min with the determination coefficient (R²) value of 0.93.     

The use of natural abundance stable isotopic ratios to indicate the presence of oxygen-containing chemical linkages between cellulose and lignin in plant cell walls

Qualitative and quantitative understanding of the chemical linkages between the three major biochemical components (cellulose, hemicellulose and lignin) of plant cell walls is crucial to the understanding of cell wall structure. Although there is convincing evidence for chemical bonds between hemicellulose and lignin and the absence of chemical bonds between hemicellulose and cellulose, there is no conclusive evidence for the presence of covalent bonds between cellulose and lignin. This is caused by the lack of selectivity of current GC/MS-, NMR- and IR-based methods for lignin characterisation as none of these techniques directly targets the possible ester and ether linkages between lignin and cellulose. We modified the widely-accepted “standard” three-step extraction method for isolating cellulose from plants by changing the order of the steps for hemicellulose and lignin removal (solubilisation with concentrated NaOH and oxidation with acetic acid-containing NaClO₂, respectively) so that cellulose and lignin could be isolated with the possible chemical bonds between them intact. These linkages were then cleaved with NaClO₂ reagent in aqueous media of contrasting ¹⁸O/¹⁶O ratios. We produced cellulose with higher purity (a lower level of residual hemicellulose and no detectable lignin) than that produced by the “standard” method. Oxidative artefacts may potentially be introduced at the lignin removal stage; but testing showed this to be minimal.Cellulose samples isolated from processing plant-derived cellulose–lignin mixtures in media of contrasting ¹⁸O/¹⁶O ratios were compared to provide the first quantitative evidence for the presence of oxygen-containing ester and ether bonds between cellulose and lignin in Zea mays leaves. However, no conclusive evidence for the presence or lack of similar bonds in Araucaria cunninghamii wood was obtained.     

Pyrolysis characteristics and kinetics of Arundo donax using thermogravimetric analysis

The increase of the price of fossil means, as well as their programmed disappearing, contributed to increase among appliances based on biomass and energy crops. The thermal behavior of Arundo donax by thermogravimetric analysis was studied under inert atmosphere at heating rates ranging from 5 to 20 °C min⁻¹ from room temperature to 750 °C. Gaseous emissions as CO₂, CO and volatile organic compounds (VOC) were measured and global kinetic parameters were determined during pyrolysis with the study of the influence of the heating rate. The thermal process describes two main phases. The first phase named active zone, characterizes the degradation of hemicellulose and cellulose polymers. It started at low temperature (200 °C) comparatively to wood samples and was finished at 350 °C. The pyrolysis of the lignin polymer occurred during the second phase from 350 to 750 °C, named passive zone. Carbon oxides are emitted during the active zone whereas VOC are mainly formed during the passive zone. Mass losses, mass loss rates and emission factors were strongly affected by the variation of the heating rate in the active zone. It was found that the global pyrolysis of A. donax can be satisfactorily described using global independent reactions model for hemicellulose and cellulose in the active zone. The activation energy for hemicellulose was not affected by a variation of the heating rate with a value close to 110 kJ mol⁻¹ and presented a reaction order close to 0.5. An increase of the heating rate decreased the activation energy of the cellulose. However, a first reaction order was observed for cellulose decomposition. The experimental results and kinetic parameters may provide useful data for the design of pyrolytic processing system using A. donax as feedstock.     

Selection strategies for developing smooth bromegrass cell wall ideotypes

Summary A random sample of 80 families of the B8HD smooth bromegrass (Bromus inermis Leyss.) population were tested in three environments for forage yield and cell wall constituents. Expected progress from one cycle of family selection was computed for single-trait selection and multiple-trait restricted selection. Expected gains were compared to desired goals and actual results from one cycle of phenotypic selection. Desired goals were: Model I = reduced lignin and cellulose, with increased hemicellulose, resulting in no change in cell wall content; Model II = reduced lignin and cellulose with no change in hemicellulose; or Model III = reduced lignin, cellulose, and hemicellulose. Single-trait selection for high hemicellulose in first harvest or low cellulose in second harvest had the best expected responses, of any single trait, for Model I. Possible undesirable effects of selection for low cellulose would be a reduction in forage yield potential. Multiple-trait restricted selection was judged to be more effective, with responses all in the desired direction, by specifying increased hemicellulose in index development. Selection in second harvest was expected to have similar responses as first harvest, except for a greater increase in forage yield. Development of Models II or III is expected to be difficult due to a negative correlation estimate between first and second harvest cell wall concentration.     

Optimization of processing conditions for the fractionation of triticale straw using pressurized low polarity water

Pressurized low polarity water (PLPW) fractionation of triticale straw was optimized to maximize hemicellulose and lignin yield, and to produce a cellulose rich fraction for biofuels production. The optimum PLPW conditions for hemicellulose yield was determined to be 165 °C, with a flow rate of 115 mL/min, and a solvent-to-solid ratio of 60 mL/g. Hemicellulose and lignin yield generally increased with increasing temperature and solvent-to-solid ratio. There was a small decrease in hemicellulose yield with an increase in flow rate. Minimum lignin content of the triticale straw residue after extraction was predicted to occur at a processing condition of 206 °C, 160 mL/min, and 67 mL/g. PLPW was successful in removing 73-78% of the hemicellulose, leaving a cellulose rich fraction (65% glucose concentration). Lignin was equally distributed between the solid residues and the extracts and most of the hemicellulose was extracted in oligomer form. Remaining solid residues after fractionation were highly digestible by cellulase enzymes.     

Genotypic variation of cell wall composition and its conversion efficiency in Miscanthus sinensis,a potential biomass feedstock crop in China

Plant cell walls are composed of cellulose microfibrils embedded in a cross‐linked‐net of matrix polysaccharides and co‐polymerized with lignin. The study presented the genotypic variations of cell wall composition, biohydrogen production, and lignocellulose degradation ratio in a collection of 102 Miscanthus sinensis (M. Sinensis, hereafter) accessions collected from a wide geographical range in China. Significant variations were observed for the determined traits, cellulose content, hemicellulose content, cellulose and hemicellulose degradation efficiency, and biohydrogen yield. The cellulose, hemicellulose, and lignin contents ranged from 30.20–44.25, 28.97–42.65, and 6.96–20.75%, respectively. The degradation ratio of cellulose and hemicellulose varied from 2.08% to 37.87% and from 14.71% to 52.50%, respectively. The feedstock was fermented to produce biohydrogen, and the production varied from 14.59 to 40.66 ml per gram of Miscanthus biomass. The expression profile of three cellulose synthase (MsCesA) genes was initially established to indicate the genotypic difference among the M. sinensis accessions. Pearson's correlations were conducted to reveal the perplexing relationship between the tested traits, biohydrogen yield, cell wall composition and their degradation efficiency. In addition, the relationship pattern, between the test traits and the geographic factors corresponding with the original place, was investigated. The result showed that the significant variation among the M. sinensis genotypes is the result of natural selection in different environments of their original habitats. Improvement in cell wall composition and structure and enhancement of lignocellulose degradation ratio could significantly increase sustainable bioenergy production.     

Cell wall biochemistry and biomechanics of harvested white asparagus shoots as affected by temperature

The effects of temperature on the dynamics of changes in shoot mechanical properties, cell wall components, relevant soluble sugars and respiration activity of harvested white asparagus spears were investigated during a 7-day storage period. All functional cell wall components of asparagus spears increased closely temperature dependent. The content of soluble glucose declined with a similar temporal dynamics and to a comparable degree, indicating a major carbon flow of this storage sugar into cell walls (60–70%). Irrespective of temperature, the contents of stored soluble fructose and sucrose remained more or less constant. Lower temperatures reduced cell wall development but do not significantly affect the relative carbon flow from storage sugars into cell walls or maintenance respiration. Compared with cell walls, maintenance respiration is by far the smaller carbon sink in stored asparagus spears. Temperature differentially affects the absolute amount and the relative contribution of the different cell wall components and the temporal dynamics of changes in structural carbohydrate and lignin content. At higher temperatures, secondary cell wall thickening resulted mainly from a large increase in cellulose content. The pronounced increase in the fractions of cellulose and especially lignin may stress the important role of lignin in cell wall strengthening. While the fraction of cell wall proteins decreased, those of hemicellulose and the pectic components were not influenced.     

Fungi of wheat and broad-bean straw composts

13 thermophilic genera and 19 species in addition to one variety of each of M. pulchella and H. grisea were collected from wheat and broad-bean straw composts at 45 °C. In wheat and broad-bean, all thermophilic fungi were completely checked between 4–9 days, and 1–8 days composting when the temperature ranged between 58° and 67 °C, and 58 ° and 70 °C respectively, and reappeared, represented by P. duponti, M. albomyces, T. lanuginosus and S. thermophile, after 9 or 10 days composting when the temperature decreased to 51.5° –54 ° C. Wheat and broad-bean straw composts were analysed biochemically to follow the changes in ethanol and diastase soluble, hemicellulose, cellulose and lignin fractions during composting.     

Fungi of wheat and broad-bean straw composts II. Thermophilic fungi

Thirteen thermohilic genera and 19 species in addition to one variety of each of M. pulchella and H.grisea were collected from wheat and broad-bean straw composts at 45 °C. In wheat and broad-bean, all thermophilic fungi were completely checked between 4–9 days, and 1–8 days composting when the temperature ranged between 58 ° and 67 °C, and 58 ° and 70 °C respectively, and reappeared, represented by P. duponti, M. albomyces, T. lanuginosus and S. thermophile, after 9 or 10 days composting when the temperature decreased to 51.5 °–54 °C. Wheat and broad-bean straw composts were analyzed biochemically to follow the changes in ethanol and diastase soluble, hemicellulose, cellulose and lignin fractions during composting.     

Studying the effects of reaction conditions on components of dairy manure and cellulose accumulation using dilute acid treatment

The objectives of this study were to statistically study the effects of reaction conditions of temperature, acid concentration, and reaction time on manure components of cellulose, hemicellulose, lignin, and nitrogen during dilute acid treatment of dairy manure; and to further optimize the accumulation of cellulose for later enzymatic conversion to glucose. A 2(3) full factorial design was adopted to investigate the effects of the reaction conditions on each individual component and later followed by a 3-factor central composite design which was used to obtain the optimal conditions for cellulose accumulation. The results indicated that acid was the most important factor for changes of all the components. The results also showed that two other individual factors, reaction time and temperature, as well as the interactions among all three factors had significant influences on the changes. In addition, the optimal conditions for cellulose accumulation were 2.8h reaction time, 140 degrees C reaction temperature, and 1.0% acid concentration. Under these conditions cellulose content reached 31.0% while hemicellulose, lignin and nitrogen content were 3.2%, 20.8% and 2.4%, respectively.     

Bioconversion of sugar cane crop residues with white-rot fungiPleurotus sp.

Four mushroom strains ofPleurotus spp. were cultivated on sugar cane crop residues for 30 days at 26°C. Biochemical changes affected the substrate as a result of fungal growth, in terms of nitrogen, lignin, cellulose and hemicellulose contents. All strains showed a strong ligninolytic activity together with variable cellulolytic and xylanolytic action.Pleurotus sajor-caju attacked lignin and cellulose at the same rate, showing a degradation of 47% and 55%, respectively. A better balance was shown by theP. ostreatus-P. pulmonarius hybrid, which exhibited the poorest cellulolytic action (39%) and the highest ligninolytic activity (67%). The average composition of mushroom fruit bodies, in terms of nitrogen, carbohydrates, fats and amino acid profiles, was determined. Crude protein and total carbohydrate varied from 23% to 33% and 36% to 68% of dry matter, respectively. Fat ranged from 3.3% to 4.7% and amino acid content from 12.2% to 22.2%. Slight evidence for a nitrogen fixing capability was encountered in the substrate to fruit body balance.     

Effects of hypergravity on growth and cell wall properties of cress hypocotyls

Elongation growth of etiolated hypocotyls of cress (Lepidiumsativum L.) was suppressed when they were exposed to basipetalhypergravity at 35 g and above. Acceleration at 135 g causeda decrease in the mechanical extensibility and an increase inthe minimum stress-relaxation time of the cell wall. Such changesin the mechanical properties of the cell wall were prominentin the lower regions of hypocotyls. The amounts of cell wallpolysaccharides per unit length of hypocotyls increased underthe hypergravity condition and, in particular, the increasein the amount of cellulose in the lower regions was conspicuous.Hypergravity did not influence the neutral sugar compositionof either the pectin or the hemicellulose fraction. The amountof lignin was also increased by hypergravity treatment, althoughthe level was low. The data suggest that hypergravity modifiesthe metabolism of cell wall components and thus makes the cellwall thick and rigid, thereby inhibiting elongation growth ofcress hypocotyls. These changes may contribute to the plants'ability to sustain their structures against hypergravity. Key words: Cell wall extensibility, cellulose, hypergravity, Lepidium sativum L., lignin     

Dispersed lignin in tracheary elements treated with cellulose synthesis inhibitors provides evidence that molecules of the secondary cell wall mediate wall patterning

Mesophyll cells of Zinnia elegans var. Envy that had been induced to differentiate into tracheary elements (TEs) in suspension culture were treated with the cellulose synthesis inhibitor 2,6-dichlorobenzonitrile (DCB). The deposition of cellulose into the patterned secondary cell wall thickenings typical of TEs was inhibited as demonstrated by reduced incorporation of [¹⁴C]glucose into acetic/nitric insoluble material and absence of cellulose detectable by fluorescence after staining with Tinopal LPW, polarization optics, or labeling with a specific cellulase. Respiration as indicated by release of ¹⁴CO₂ was inhibited to a much lesser extent, supporting a selective mechanism of action of DCB on the cellulose biosynthetic pathway. Patterned secondary cell wall thickenings were deposited in DCB-treated TEs, but these were smaller and less regularly shaped than those of control TEs. These cellulose-depleted thickenings lacked another abundant component of normal thickenings, the hemicellulose xylan, as indicated by absence of labeling with a specific xylanase or an antibody to xylan. DCB-treated TEs also showed dispersed lignin after staining with phloroglucinol, whereas control TEs contained lignin specifically localized to the secondary cell wall thickenings. Isoxaben, another recently described inhibitor of synthesis of acetic/nitric insoluble cell wall material (putatively cellulose), caused the same absence of detectable cellulose and xylan in the thickenings and dispersed lignin. These data suggest that: (i) the localization of lignin is ultimately dependent on the localization of cellulose; (ii) normal patterned wall assembly in TEs occurs in a self-perpetuating cascade in which some molecules of the secondary cell wall mediate patterning of others.     

Turnover of cell wall polysaccharides of a Vinca rosea suspension culture

Turnover of cell wall components was examined in two growth phases of a batch suspension culture of Vinca rosea L. Three-day-cultured cells (cell division phase) and 5-day-cultured cells (cell expansion phase) were incubated with d -[U-¹⁴C]glucose. After various periods of incubation, extra-cellular polysaccharides (ECP) and cell walls were isolated, and then the cell walls were fractionated to pectic substance, hemicellulose, and cellulose fractions. The results of the measurement of radioactivities and amounts of total carbohydrate in the ECP and cell wall fractions indicated that synthesis of pectic substance was more active in the cell division phase than in the cell expansion phase. From the results of the pulse-chase experiments, in which cells prelabelled by incubation with d -[U-¹⁴C]glucose for 3 h were incubated in a medium containing unlabelled glucose for various periods, the gross degradation, net synthesis, and gross synthesis of cell wall components were estimated. Active degradation and synthesis were observed in the hemicellulose fraction, indicating that active turnover occurred in the hemicellulose fraction, while little degradation was found in the pectic substance and cellulose fractions.     

Evolution of xyloglucan-related genes in green plants

Background  

The cell shape and morphology of plant tissues are intimately related to structural modifications in the primary cell wall that are associated with key processes in the regulation of cell growth and differentiation. The primary cell wall is composed mainly of cellulose immersed in a matrix of hemicellulose, pectin, lignin and some structural proteins. Xyloglucan is a hemicellulose polysaccharide present in the cell walls of all land plants (Embryophyta) and is the main hemicellulose in non-graminaceous angiosperms.     

Enzyme hydrolysis and ethanol fermentation of dilute ammonia pretreated energy cane

This study is the first one ever to report on the use of high fiber sugarcane (a.k.a. energy cane) bagasse as feedstock for the production of cellulosic ethanol. Energy cane bagasse was pretreated with ammonium hydroxide (28% v/v solution), and water at a ratio of 1:0.5:8 at 160 °C for 1 h under 0.9-1.1 MPa. Approximately, 55% lignin, 30% hemicellulose, 9% cellulose, and 6% other (e.g., ash, proteins) were removed during the process. The maximum glucan conversion of dilute ammonia treated energy cane bagasse by cellulases was 87% with an ethanol yield (glucose only) of 23 g ethanol/100 g dry biomass. The enzymatic digestibility was related to the removal of lignin and hemicellulose, perhaps due to increased surface area and porosity resulting in the deformation and swelling of exposed fibers as shown in the SEM pictures.     

Suppression of cell wall stiffening along coleoptiles of wheat (Triticum aestivum L.) seedlings grown under osmotic stress conditions

Effects of polyethylene glycol (PEG)-induced osmotic stress on the mechanical properties of cell walls and the levels of their components were investigated along intact wheat (Triticum aestivum L.) coleoptiles. Stress-relaxation analysis showed that the cell walls of stressed coleoptiles were loosened as compared with those of unstressed ones not only in the apical but in the basal regions. The amounts of wall-bound ferulic acid (FA) and diferulic acid (DFA) of stressed coleoptiles were substantially lower than those of unstressed ones in all regions. The cellulose and hemicellulose contents increased toward the coleoptile base. Osmotic stress reduced the cellulose content in the basal region but it slightly affected the hemicellulose content. The molecular weight of hemicellulose in the apical region of stressed coleoptiles was higher than that of unstressed ones, while that in the basal region was almost the same in both coleoptiles. FA, DFA and cellulose contents correlated with the cell wall mechanical property. The amount and molecular weight of hemicellulose, however, did not correlate. These results suggest that the reduced levels of FA and DFA in all regions and cellulose in the basal region of wheat coleoptiles are involved in maintaining the cell wall extensibility under osmotic stress.     

The Influence of Hemicellulose and Lignin Removal on the Enzymatic Digestibility from Sugarcane Bagasse

Sugarcane bagasse (SCB) was pretreated with liquid hot water (LHW) and aqueous ammonia (AA), with the objective of investigating the influence of hemicellulose and lignin removal on the enzymatic digestibility and sugar recovery. The experimental results show that LHW and aqueous ammonia have a good performance in terms of hemicellulose dissolution and lignin removal respectively. The biggest xylan recovery of 74.3 % was obtained for LHW pretreatment at 160 °C, 5 %?w/v for 20 min with the xylan dissolution of 83.1 %. And the biggest lignin removal of 84.0 % was obtained for aqueous ammonia pretreatment at 160 °C, 10 %?w/v for 60 min. Moreover, the aperture and surface area of the sample were enlarged by the liquid hot water, which improves the accessibility of the substrate to the enzyme. The lignin removal caused by aqueous ammonia pretreatment can reduce the absorption of enzyme. In addition, the correlation between the compositional change and the enzymatic digestibility indicates that the removal of hemicellulose was more effective than lignin for destruction of the hemicellulose–lignin–cellulose structure.