用于胚胎干细胞分离培养的洋养层细胞株的建立

具有发育全能性的胚干细胞在分离培养时必须依赖滋养层细胞,本研究旨在建议一个可供使用的滋养层细胞株。本实验所建立的小鼠成纤维细胞系,已居民轩用于胚干细胞的分离培养,证明可作为分离培养胚干细胞时所需的滋养层细胞来源。     

潮霉素抗性的小鼠胚胎干细胞滋养层的制备

目的：获得潮霉素抗性的小鼠胚胎干细胞滋养层。方法：利用基因组整合了潮霉素B磷酸转移酶基因的小鼠品系Smad4hygro＋/-,从受精14d的小鼠胚胎中制备原代胚胎成纤维细胞;鉴定基因型后,挑选一株潮霉素B磷酸转移酶基因杂合型胚胎成纤维细胞,用丝裂霉素C处理,以获得潮霉素抗性的滋养层细胞。结果：经潮霉素B加压处理后,杂合型滋养层细胞可存活2周左右,并可维持胚胎干细胞的生长。结论：制备的滋养层细胞可用于潮霉素抗性胚胎干细胞的筛选。     

用饲养层分离胚胎干细胞集落的实验初探

目的 用饲养层分离胚胎干细胞集落。方法 用胚龄为13~14 d的小鼠胚胎分离原代成纤维细胞,制成饲养层,用于囊胚的培养。结果 小鼠原代胚胎成纤维细胞（PMEF）贴壁能力较好,增殖快,易铺层。囊胚和内细胞团（ICM）在饲养层上贴壁生长良好,当培养4~5 d时,其增殖率为16/28（57%）。在ICM离散48 h后,各种胚胎干细胞（ES）集落开始出现。此种集落经碱性磷酸酶染色成阳性。结论 用饲养层分离胚胎干细胞获得初步成功。     

小鼠表皮干细胞的分离与培养

目的:探讨体外分离和培养小鼠表皮干细胞和分析表皮干细胞克隆形成能力的方法。方法:采用中性蛋白酶和胰酶消化新生小鼠表皮基底层细胞,将细胞直接接种在细胞瓶中,在无滋养层条件下培育;利用表皮干细胞标记物K15和α6整联蛋白进行免疫荧光鉴定;以小鼠胚胎成纤维细胞作为滋养层与成年小鼠角质细胞共培养,进而分析表皮干细胞的克隆形成能力。结果:新生小鼠表皮干细胞克隆在培养2～3 d后开始形成,细胞核质较小,细胞呈小而圆的形态特征;传代后的细胞可以被K15和α6整联蛋白特异性标记。结论:利用该方法能够实现对小鼠表皮干细胞的体外培养和传代。     

小鼠胚胎干细胞的培养

目的:建立小鼠胚胎干细胞(embryonic stem cells,ES)的培养方法。方法:制备G418抗性的原代小鼠胚胎成纤维细胞,经丝裂霉素C处理后成滋养层细胞,将小鼠胚胎干细胞复苏后,应用含白血病抑制因子的ES细胞培养液,培养小鼠ES细胞,观察集落的生长情况,并在光镜下观察细胞形态。结果:小鼠胚胎成纤维细胞生长良好,ES细胞呈克隆状生长,且保持未分化状态。结论:建立了小鼠胚胎干细胞培养的有效方法,为下一步基因打靶奠定基础。     

用小鼠血液淋巴细胞构建核移植重构胚的研究

本实验用小鼠血液淋巴细胞为核供体进行了核移植研究。用淋巴细胞分离液(比重1.088)分离出小鼠血液中的淋巴细胞,直接用作核移植供体细胞,采用胞质内注射法成功构建的重构胚经常规培养2h后,SrCl_2激活处理6h,然后添加mM16培养液和小鼠输卵管上皮细胞饲养层共培养。把发育至早期囊胚阶段的重构胚转移至小鼠胎儿成纤维细胞饲养层上,添加ES细胞培养液继续培养。对孵化出的内细胞团进行消化,然后接种培养。结果显示,小鼠血液淋巴细胞可以支持体细胞核移植重构胚的发育,核移植重构胚2-细胞率41.03%(128/312),桑葚胚和囊胚发育率分别为9.29%(29/312),1.92%(6/312)。重构囊胚在小鼠胎儿成纤维细胞饲养层上分离出2个内细胞团,分离率为0.64%(2/312)。实验证实利用小鼠血液淋巴细胞进行体细胞核移植是可行的,可用于深入研究。     

昆明小鼠胚胎干细胞滋养层制备条件的实验研究

目的:建立小鼠胚胎成纤维细胞(MEFS)滋养层,用于昆明小鼠胚胎干细胞的培养。方法:取妊娠13.5的胎鼠,采用组织消化法分离培养出原代成纤维细胞,对MEFs的生长形态、生长曲线及分裂指数进行观察;MTT法筛选丝裂霉素C(MMC)作用的最佳浓度和时间;取妊娠3.5d的囊胚在经MMC处理的饲养层上培养,观察胚胎干细胞集落生成情况。结果:MEFS为一种贴壁生长且增殖速度较快的细胞,第三代细胞增殖旺盛,第5代以后细胞开始变形并趋于衰老;MMC能抑制胚胎成纤维细胞的增殖,最佳的作用浓度和时间是10ug/ml作用2.5～4h,20ug/ml作用1-2.5h。妊娠3.5d小鼠囊胚在饲养层上培养能形成典型的"鸟巢"状干细胞集落,并可维持胚胎干细胞的正常形态且不发生分化。结论:这种方法制备的滋养细胞层适用于胚胎干细胞的培养。     

不同饲养层对鸡胚胎干细胞培养效果的影响

目的:为探索鸡胚胎干细胞培养的优化条件,比较不同饲养层对鸡胚胎干细胞离体培养的效果。方法:用传至第2代的鸡胚成纤维细胞与鸭胚成纤维细胞,经丝裂霉素处理后制作饲养层,比较这2种饲养层以及不用饲养层对鸡胚胎干细胞离体培养效果的影响。结果:在以鸡胚成纤维细胞和鸭胚成纤维细胞作为饲养层的培养体系中,鸡胚胎干细胞均可保持良好的生长状态,而且2种饲养层对鸡胚胎干细胞克隆形成的影响差异不显著(P0.05)。结论:鸡胚成纤维细胞和鸭胚成纤维细胞均可作为较好的饲养层细胞用于鸡胚胎干细胞的离体培养。     

用小鼠血液淋巴细胞构建核移植重构胚的研究

本实验用小鼠血液淋巴细胞为核供体进行了核移植研究。用淋巴细胞分离液(比重1．088)分离出小鼠血液中的淋巴细胞,直接用作核移植供体细胞,采用胞质内注射法成功构建的重构胚经常规培养2h后,SrCl2激活处理6h,然后添加mM16培养液和小鼠输卵管上皮细胞饲养层共培养。把发育至早期囊胚阶段的重构胚转移至小鼠胎儿成纤维细胞饲养层上,添加ES细胞培养液继续培养。对孵化出的内细胞团进行消化,然后接种培养。结果显示,小鼠血液淋巴细胞可以支持体细胞核移植重构胚的发育,核移植重构胚2-细胞率41．03％(128／312),桑葚胚和囊胚发育率分别为9．29％(29／312),1．92％(6／312)。重构囊胚在小鼠胎儿成纤维细胞饲养层上分离出2个内细胞团,分离率为0．64％(2／312)。实验证实利用小鼠血液淋巴细胞进行体细胞核移植是可行的,可用于深入研究。     

鸡胚胎生殖细胞在鼠胚成纤维细胞饲养层上的生长

目的:探讨以鼠胚成纤维细胞为饲养层分离、培养鸡胚胎生殖细胞的方法和条件。方法:分离、培养12.5～13.5d鼠胚成纤维细胞。分离孵化5.5d鸡胚原始生殖细胞,原代培养时不使用饲养层,与性腺基质细胞共培养;继代培养时将其置于鼠胚成纤维细胞饲养层上,在含生长因子、分化抑制因子的培养体系中培养胚胎生殖细胞。结果:鼠胚成纤维细胞可连续传代18代以上(4个月),3～15代细胞可以用作饲养层细胞。分离的鸡胚胎生殖细胞在饲养层上可增殖形成典型胚胎生殖细胞集落,并能连续在体外培养超过9代。集落未分化标志高碘酸希夫反应(PAS)呈强阳性,体外分化实验表明胚胎生殖细胞具有多能性。结论:用鼠胚成纤维细胞作为饲养层能获得可连续增殖的胚胎生殖细胞。     

Effects of different feeder layers on culture of bovine embryonic stem cell-like cells in vitro

To find a suitable feeder layer is important for successful culture conditions of bovine embryonic stem cell-like cells. In this study, expression of pluripotency-related genes OCT4, SOX2 and NANOG in bovine embryonic stem cell-like cells on mouse embryonic fibroblast feeder layers at 1–5 passages were monitored in order to identify the possible reason that bovine embryonic stem cell-like cells could not continue growth and passage. Here, we developed two novel feeder layers, mixed embryonic fibroblast feeder layers of mouse and bovine embryonic fibroblast at different ratios and sources including mouse fibroblast cell lines. The bovine embryonic stem cell-like cells generated in our study displayed typical stem cell morphology and expressed specific markers such as OCT4, stage-specific embryonic antigen 1 and 4, alkaline phosphatase, SOX2, and NANOG mRNA levels. When feeder layers and cell growth factors were removed, the bovine embryonic stem cell-like cells formed embryoid bodies in a suspension culture. Furthermore, we compared the expression of the pluripotent markers during bovine embryonic stem cell-like cell in culture on mixed embryonic fibroblast feeder layers, including mouse fibroblast cell lines feeder layers and mouse embryonic fibroblast feeder layers by real-time quantitative polymerase chain reaction. Results suggested that mixed embryonic fibroblast and sources including mouse fibroblast cell lines feeder layers were more suitable for long-term culture and growth of bovine embryonic stem cell-like cells than mouse embryonic fibroblast feeder layers. The findings may provide useful experimental data for the establishment of an appropriate culture system for bovine embryonic stem cell lines.     

Design of an insect cuticle associated with osmoregulation: the porous plates of chloride cells in a mayfly nymph

In mayfly nymphs of the genus Coloburiscoides, cell complexes with an osmoregulatory function (so-called chloride cells) are found in the integuments of the oral gills, the abdominal gills and gill filaments, the coxae and the thoracic sternites. The cuticle overlying each cell complex is a rigid circular plate which is known to be porous to colloidal lanthanum suspensions. The present study shows that the plate is composed only of the cuticulin and dense layers of the epicuticle. Both layers have substructures built of subunits on almost perfect hexagonal lattices. The lattice spacings are 53 and 9.5 nm for the dense layer and the cuticulin layer respectively. During moulting the apical plasma membrane of the chloride cell remains adpressed to the old porous plate. The new porous plate is formed from a new chloride cell which intrudes from the base of the integument. Throughout the moult small pores persist in the new and otherwise continuous cuticle to allow continuity of the cytoplasm of the apical and basal portions of the old chloride cell. It is thought that this phenomenon allows osmoregulatory function of the chloride cell complex to be maintained during the moult.     

High-efficiency derivation of human embryonic stem cell lines following pre-implantation genetic diagnosis

Pre-implantation genetic diagnosis allows the characterisation of embryos that carry a gene responsible for a severe monogenic disease and to transfer to the mother’s uterus only the unaffected one(s). The genetically affected embryos can be used to establish human embryonic stem cell (hESC) lines. We are currently establishing a cell bank of ESC lines carrying specific disease-causing mutant genes. These cell lines are available to the scientific community. For this purpose, we have designed a technique that requires only minimal manipulation of the embryos. At the blastocyst stage, we just removed the zona pellucida before seeding the embryo as a whole on a layer of feeder cells. This approach gave a good success rate (>20%), whatever the quality of the embryos, and allowed us to derive 11 new hESC lines, representing seven different pathologies. Full phenotypic validation of the cell lines according to ISCI guidelines confirmed their pluripotent nature, as they were positive for hESC markers and able to differentiate in vitro in all three germ layers derivatives. Nine out of 11 stem cell lines had normal karyotypes. Our results indicate that inner cell mass isolation is not mandatory for hESC derivation and that minimal manipulation of embryos can lead to high success rate.     

Establishment and characterisation of two cell lines with different grade of differentiation derived from one primary human pancreatic adenocarcinoma.

From a liver metastasis of a human pancreatic adenocarcinoma, we have established cell lines for studying the cell biology of this tumor. We obtained two cell lines with different morphological, chromosomal and functional properties. One of them, named PaTu 8988s, revealed a solid growth in nude mouse xenografts with cells exhibiting only occasional polar organisation of the cytoplasm. In general, no apical or basolateral plasma membrane domains could be distinguished and the sparse organelles were randomly distributed throughout the cytoplasm. Secretory products, such as mucin, were weakly stained histochemically or were completely absent. Transglutaminase (TGase) activity used as a marker for cellular differentiation was low in these cells. The other cell line, named PaTu 8988t, grew tumors composed of tubular structures when injected subcutaneously into nude mice. Cells were polarized with distinct apical and basolateral plasma membranes and the cytoplasmatic organelles were arranged with the nucleus in the lower part of the cell, while the apical cytoplasm contained the Golgi complex and numerous secretion granules. A high content of mucin was stained histochemically and transglutaminase activity was ten times higher than in PaTu 8988s. Comparing the chromosome number per metaphase plate, both cell lines showed a major peak, with 45-55 chromosomes per metaphase plate in PaTu 8988s and about 110-120 chromosomes per metaphase plate in PaTu 8988t. When the two cell lines were injected intravenously into the tail vein of nude mice, only PaTu 8988s developed metastases localized exclusively in the lung, whereas PaTu 8988t produced no metastases in any organ. We conclude, that two cell lines exhibiting different grades of differentiation as well as a different potency to metastasize can be established from the same primary tumor, and that these cell lines represent a suitable model for further study of the cell biology of human pancreatic adenocarcinoma.     

Screening and assessment of performance and molecule quality attributes of industrial cell lines across different fed‐batch systems

The major challenge in the selection process of recombinant cell lines for the production of biologics is the choice, early in development, of a clonal cell line presenting a high productivity and optimal cell growth. Most importantly, the selected candidate needs to generate a product quality profile which is adequate with respect to safety and efficacy and which is preserved across cell culture scales. We developed a high‐throughput screening and selection strategy of recombinant cell lines, based on their productivity in shaking 96‐deepwell plates operated in fed‐batch mode, which enables the identification of cell lines maintaining their high productivity at larger scales. Twelve recombinant cell lines expressing the same antibody with different productivities were selected out of 470 clonal cell lines in 96‐deepwell plate fed‐batch culture. They were tested under the same conditions in 50 mL vented shake tubes, microscale and lab‐scale bioreactors in order to confirm the maintenance of their performance at larger scales. The use of a feeding protocol and culture conditions which are essentially the same across the different scales was essential to maintain productivity and product quality profiles across scales. Compared to currently used approaches, this strategy has the advantage of speeding up the selection process and increases the number of screened clones for getting high‐producing recombinant cell lines at manufacturing scale with the desired performance and quality. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:160–170, 2016     

IN VITRO PROLIFERATION OF MOUSE LYMPHOBLASTOID CELL LINES: GROWTH MODULATION BY VARIOUS POPULATIONS OF ADHERENT CELLS

The in vitro growth pattern of a number of mouse lymphoblastoid tumour cell lines was modified in the presence of adherent cell layers from various sources. The AVRij-1 and ST-4b cell lines exhibited a concentration—dependent growth pattern, i.e., they would only grow well when seeded at high starting cell concentrations. Better growth of these cells from low cell concentrations was observed in the presence of adherent cell layers from syngeneic or allogeneic bone marrow. Adherent cell layers derived from mouse spleen and pleural or peritoneal cavity could also promote the growth of the above tumour cells, but in a narrower range of cell concentrations and to a lower extent. Moreover, confluent adherent layers from the pleural and peritoneal cavities completely inhibited the growth of AVRij-1 and ST-4b cells, while adherent cell layers from the bone marrow did not inhibit growth at any cell concentration tested. The in vitro growth of concentration—independent cell lines was also affected by the presence of adherent cells from the bone marrow. Under syngeneic conditions, a slight increase in the growth of the ‘null’ or pre-B lymphoma cell line ABLS-8.1 was observed. On the other hand, the growth of tumour cells expressing more differentiated properties, such as the thymus T lymphoma tumour cell line ST-1.3 and the plasma cell tumour MPC-11.45.6.2.4, was inhibited in the presence of syngeneic bone marrow derived adherent cell layers. This inhibition was more pronounced under allogeneic conditions. Growth inhibition was also observed when concentration—independent cell lines were co-cultured with adherent cells from the pleural and peritoneal cavities. Thus, adherent cell layers from non-haemopoietic sources inhibited the growth of all cell lines tested. On the other hand, adherent cells from the bone marrow had a differential effect on growth of lymphoblastoid tumour cell lines. This depended on the in vitro growth properties of each tumour cell line and on some additional specific tumour cell properties. The latter could relate to the differentiation stage characterizing each tumour cell line. The culture method described here may serve as a model system for studies on interaction of leukaemic cell and the haemopoietic microenvironment.     

Establishment of pluripotent cell lines from porcine preimplantation embryos

Embryonic stem (ES) cells are pluripotent cells isolated from in vitro culture of preimplantation embryos. Experiments were undertaken to identify preimplantation embryonic stages and culture conditions under which pluripotent, porcine embryo-derived cell lines could be isolated. Cell lines were established from in vitro culture of intact, porcine early hatched blastocysts and isolated inner cell masses (ICM) from intermediate and late hatched blastocysts on feeder layers prepared from permanent mouse embryonic fibroblasts (STO). The cells of these porcine embryo-derived cell lines had a morphology similar to that of murine ES cells, but colony morphology was more epithelial-like. The cell lines retained a normal diploid karyotype, consistently expressed alkaline phosphatase activity, and survived cryopreservation. When subjected to in vitro differentiation, either spontaneous or induced, the embryo-derived cell lines differentiated extensively into a wide range of cell types representing the 3 embryonic germ layers. In vivo pluripotency of the cells was demonstrated by birth of a chimeric piglet, documented by pigmentation and DNA markers, and the ability to direct the development of nuclear-transfer embryos to the blastocyst stage. Such pluripotent embryo-derived cells provide a potential route for porcine genetic manipulation.     

Cell Contacts Between Chorda-Mesoderm and the Overlaying Neuroectoderm (Presumptive Central Nervous System) During the Period of Primary Embryonic Induction in Amphibians

Using transmission and scanning electron microscopy we were able to show that during primary embryonic induction in amphibians ( Triturus alpestris ) the interspace between the inducing chorda-mesoderm and the reacting ectoderm (presumptive medullary plate) of mid-gastrula stages is traversed by cell projections starting from cells of both tissue layers. In addition intimate membrane contacts between the main bodies of the ectodermal and chorda-mesodermal cells could be observed.
It could be ruled out that cytoplasmic bridges (anastomosis) exist between cells of inducing chorda-mesoderm and reacting ectoderm, which would allow a free transfer of inducing substances without passing through membranes, as Eakin and Lehmann [1] have postulated. The possible role of cell to cell contact for neural induction is emphasized.     

Cell contacts between chorda-mesoderm and the overlaying neuroectoderm (presumptive central nervous system) during the period of primary embryonic induction in amphibians.

Using transmission and scanning electron microscopy we were able to show that during primary embryonic induction in amphibians (Triturus alpestris) the interspace between the inducing chorda-mesoderm and the reacting ectoderm (presumptive medullary plate) of mid-gastrula stages is traversed by cell projections starting from cells of both tissue layers. In addition intimate membrane contacts between the main bodies of the ectodermal and chorda-mesodermal cells could be observed. It could be ruled out that cytoplasmic bridges (anastomosis) exist between cells of inducing chorda-mesoderm and reacting ectoderm, which would allow a free transfer of inducing substances without passing through membranes, as Eakin and Lehmann [1] have postulated. The possible role of cell to cell contact for neural induction is emphasized.