Beneficial Effect of Corncob Acid Hydrolysate on the Lipid Production by Oleaginous Yeast Trichosporon dermatis

In this work, corncob acid hydrolysate and its simulated medium whose sugar composition was the same as the corncob acid hydrolysate were used as fermentation substrate for lipid production by oleaginous yeast Trichosporon dermatis. On the corncob acid hydrolysate, after 7 days of fermentation, the biomass, lipid content, lipid yield, and lipid coefficient of T. dermatis were 17.3 g/L, 40.2%, 7.0 g/L, and 16.5%, respectively. Interestingly, during the lipid fermentation on the corncob acid hydrolysate, glucose, xylose, arabinose, and even acetic acid could be well utilized as carbon sources by T. dermatis. Surprisingly, the lipid yield (7.0 g/L) of T. dermatis on the corncob acid hydrolysate was much higher than that (3.8 g/L) on the simulated medium, in spite of the fact that the lipid coefficient (17.4%) on the simulated medium was a little higher. This phenomenon further showed that lignocellulosic acid hydrolysate was a suitable substrate for lipid fermentation by T. dermatis. This work would help the comprehensive utilization of lignocellulosic biomass for lipid production.     

Lumping kinetics of ABE fermentation wastewater treatment by oleaginous yeast Trichosporon cutaneum

Lumping kinetics models were built for the biological treatment of acetone–butanol–ethanol (ABE) fermentation wastewater by oleaginous yeast Trichosporon cutaneum with different fermentation temperatures. Compared with high temperature (33°C, 306?K) and low temperature (23°C, 296?K), medium temperature (28°C, 301?K) was beneficial for the cell growth and chemical oxygen demand (COD) degradation during the early stage of fermentation but the final yeast biomass and COD removal were influenced little. By lumping method, the materials in the bioconversion network were divided into five lumps (COD, lipid, polysaccharide, other intracellular products, other extracellular products), and the nine rate constants (k₁–k₉) for the models can well explain the bioconversion laws. The Gibbs free energy (G) for this bioconversion was positive, showing that it cannot happen spontaneous, but the existence of yeast can after the chemical equilibrium and make the bioconversion to be possible. Overall, the possibility of using lumping kinetics for elucidating the laws of materials conversion in the biological treatment of ABE fermentation wastewater by T. cutaneum has been initially proved and this method has great potential for further application.     

Enhanced ethanol production from industrial lignocellulose hydrolysates by a hydrolysate-cofermenting Saccharomyces cerevisiae strain

Industrial production of lignocellulosic ethanol requires a microorganism utilizing both hexose and pentose, and tolerating inhibitors. In this study, a hydrolysate-cofermenting Saccharomyces cerevisiae strain was obtained through one step in vivo DNA assembly of pentose-metabolizing pathway genes, followed by consecutive adaptive evolution in pentose media containing acetic acid, and direct screening in biomass hydrolysate media. The strain was able to coferment glucose and xylose in synthetic media with the respective maximal specific rates of glucose and xylose consumption, and ethanol production of 3.47, 0.38 and 1.62 g/g DW/h, with an ethanol titre of 41.07 g/L and yield of 0.42 g/g. Industrial wheat straw hydrolysate fermentation resulted in maximal specific rates of glucose and xylose consumption, and ethanol production of 2.61, 0.54 and 1.38 g/g DW/h, respectively, with an ethanol titre of 54.11 g/L and yield of 0.44 g/g. These are among the best for wheat straw hydrolysate fermentation through separate hydrolysis and cofermentation.

     

Conversion of acid hydrolysate of oil palm empty fruit bunch to L-lactic acid by newly isolated Bacillus coagulans JI12

Cost-effective conversion of lignocellulose hydrolysate to optically pure lactic acid is commercially attractive but very challenging. Bacillus coagulans JI12 was isolated from natural environment and used to produce L-lactic acid (optical purity?>?99.5 %) from lignocellulose sugars and acid hydrolysate of oil palm empty fruit bunch (EFB) at 50 °C and pH 6.0 without sterilization of the medium. In fed-batch fermentation with 85 g/L initial xylose and 55 g/L xylose added after 7.5 h, 137.5 g/L lactic acid was produced with a yield of 98 % and a productivity of 4.4 g/L?h. In batch fermentation of a sugar mixture containing 8.5 % xylose, 1 % glucose, and 1 % L-arabinose, the lactic acid yield and productivity reached 98 % and 4.8 g/L?h, respectively. When EFB hydrolysate was used, 59.2 g/L of lactic acid was produced within 9.5 h at a yield of 97 % and a productivity of 6.2 g/L?h, which are the highest among those ever reported from lignocellulose hydrolysates. These results indicate that B. coagulans JI12 is a promising strain for industrial production of L-lactic acid from lignocellulose hydrolysate.     

皮状丝孢酵母B3利用木薯淀粉发酵生产微生物油脂

对皮状丝孢酵母B3以木薯淀粉水解液为碳源发酵生产微生物油脂培养条件进行了优化,并在2 L发酵罐中对菌体生长和油脂积累进行了考察。摇瓶实验表明,木薯淀粉水解液的浓度高于90 g/L时不利于菌体的生长和油脂积累,皮状丝孢酵母B3发酵生产微生物油脂的最适氮源及其浓度、最适C/N比和pH分别为酵母提取物3.0 g/L、116、6.0,在此条件下培养144 h菌体生物量、油脂产量和油脂含量分别达到15.2 g/L、6.22 g/L和40.9％;在2 L发酵罐中分批发酵44 h后菌体生物量、油脂产量和油脂含量分别达28.7 g/L、12.27 g/L和42.8％。以皮状丝孢酵母B3所产油脂制备生物柴油,其主要组成包括棕榈酸甲酯、硬脂酸甲酯、油酸甲酯、亚油酸甲酯等,且理化特性符合相关国家标准,可作为一种有潜力的化石燃料替代品。     

Kinetic modeling of Candida shehatae ATCC 22984 on xylose and glucose for ethanol production

Candida shehatae ATCC 22984, a xylose-fermenting yeast, showed an ability to produce ethanol in both glucose and xylose medium. Maximum ethanol produced by the yeast was 48.8?g/L in xylose and 52.6?g/L in glucose medium with ethanol yields that varied between 0.3 and 0.4?g/g depended on initial sugar concentrations. Xylitol was a coproduct of ethanol production using xylose as substrate, and glycerol was detected in both glucose and xylose media. Kinetic model equations indicated that growth, substrate consumption, and product formation of C. shehatae were governed by substrate limitation and inhibition by ethanol. The model suggested that cell growth was totally inhibited at 40?g/L of ethanol and ethanol production capacity of the yeast was 52?g/L, which were in good agreement with experimental results. The developed model could be used to explain C. shehatae fermentation in glucose and xylose media from 20 to 170?g/L sugar concentrations.     

Efficient bioconversion from acid hydrolysate of waste oleaginous yeast biomass after microbial oil extraction to bacterial cellulose by Komagataeibacter xylinus

Biomass acid hydrolysate of oleaginous yeast Trichosporon cutaneum after microbial oil extraction was applied as substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus (also named as Gluconacetobacter xylinus previously) for the first time. BC was synthesized in static culture for 10 days, and the maximum BC yield (2.9?g/L) was got at the 4th day of fermentation. Most carbon sources in the substrate (glucose, mannose, formic acid, acetic acid) can be utilized by K. xylinus. The highest chemical oxygen demand (COD) removal (40.7?±?3.0%) was obtained at the 6th day of fermentation, and then the COD increased possibly due to the degradation of BC. The highest BC yield on COD consumption was 38.7?±?4.0% (w/w), suggesting that this is one efficient bioconversion for BC production. The BC structure was affected little by the substrate by comparison with that generated in classical HS medium using field-emission scanning electron microscope (FE-SEM), Fourier transform infrared, and X-ray diffraction. Overall, this technology can both solve the issue of waste oleaginous yeast biomass and produce valuable biopolymer (BC).     

Critical factors affecting ethanol production by immobilized Pichia stipitis using corn cob hemicellulosic hydrolysate

Fermentation of xylose from hydrolysate of acid-treated corn cob by Pichia stipitis is inhibited by acetic acid and lignin derivatives. In the present study, we have designed and implemented an immobilized cell culture for xylose to ethanol conversion from acid-treated corn cob hydrolysate without the removal of fermentation inhibitors. In this study, cultivations of suspended and immobilized Pichia were compared in terms of ethanol yield and productivity to investigate whether the cell immobilization could improve resistance to inhibitors. Cell immobilization clearly favored the fermentative metabolism in nondetoxified corn cob hydrolysate leading to an improvement of twofold ethanol productivity as compared to that achieved with suspension culture. Calcium alginate as an immobilization matrix was selected to immobilize Pichia cells. Concentrations of sodium alginate, calcium chloride, and fermentor agitation speed were optimized for ethanol production using statistical method. Statistical analysis showed that agitation speed had maximum influence on ethanol production by immobilized Pichia cells. In comparison to suspension culture, immobilization had a positive impact on the fermentative metabolism of Pichia, improving the ethanol yield from 0.40 to 0.43?g/g and productivity from 0.31 to 0.51?g/L/h for acid-treated corn cob hydrolysate.     

Lactic acid production from sugarcane bagasse hydrolysates by Lactobacillus pentosus: Integrating xylose and glucose fermentation

Lactic acid, traditionally obtained through fermentation process, presents numerous applications in different industrial segments, including production of biodegradable polylactic acid (PLA). Development of low cost substrate fermentations could improve economic viability of lactic acid production, through the use of agricultural residues as lignocellulosic biomass. Studies regarding the use of sugarcane bagasse hydrolysates for lactic acid production by Lactobacillus spp. are reported. First, five strains of Lactobacillus spp. were investigated for one that had the ability to consume xylose efficiently. Subsequently, biomass fractionation was performed by dilute acid and alkaline pretreatments, and the hemicellulose hydrolysate (HH) fermentability by the selected strain was carried out in bioreactor. Maximum lactic acid concentration and productivity achieved in HH batch were 42.5 g/L and 1.02 g/L h, respectively. Hydrolyses of partially delignified cellulignin (PDCL) by two different enzymatic cocktails were compared. Finally, fermentation of HH and PDCL hydrolysate together was carried out in bioreactor in a hybrid process: saccharification and co-fermentation with an initial enzymatic hydrolysis. The high fermentability of these process herein developed was demonstrated by the total consumption of xylose and glucose by Lactobacillus pentosus, reaching at 65.0 g/L of lactic acid, 0.93 g/g of yield, and 1.01 g/L h of productivity. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2718, 2019     

Improvement of kojic acid production in Aspergillus oryzae B008 mutant strain and its uses in fermentation of concentrated corn stalk hydrolysate

A strain designated M866, producing kojic acid with a high yield, was obtained by combining induced mutation using ion beam implantation and ethyl methane sulfonate treatment of a wild type strain of Aspergillus oryzae B008. The amount of kojic acid produced by the strain M866 in a shaking flask was 40.2 g/L from 100 g/L of glucose, which was 1.7 times higher than that produced by wild strain (23.58 g/L). When the mixture of glucose and xylose was used as carbon source, the resulting kojic acid production was raised with the increasing of glucose ratios in the mixture. With concentrations of glucose at 75 g/L and xylose at 25 g/L mixed in the medium, the production of kojic acid reached 90.8 %, which was slightly lower than with glucose as the sole source of carbon. In addition, the kojic acid fermentation of the concentrated hydrolysate from corn stalk was also investigated in this study, the maximum concentration of kojic acid accumulated at the end of the fermentation was 33.1 g/L and this represents the yield based on reducing sugar consumed and the overall productivity of 0.36 g/g and 0.17 g/L/h, respectively.     

皮状丝孢酵母同步利用葡萄糖/木糖的糖转运动力学简

皮状丝孢酵母（ Trichosporon cutaneum）能够同步利用葡萄糖和木糖生产油脂。以2脱氧葡萄糖（2 DOG）为底物,考察皮状丝孢酵母糖跨膜运输的转运动力学。结果表明：2 DOG转运符合米氏方程,表观米氏常数Km为0.19 mmol/L,最大转运速率Vmax为14.1 nmol/（ min＆#183;mg）。葡萄糖和木糖均竞争性抑制2 DOG转运,葡萄糖表观抑制常数Ki远低于木糖,表明存在一个共用转运体系,且该转运体系对葡萄糖亲和力更高。大量木糖与2 DOG同时转运到胞内,进一步说明木糖与葡萄糖共运输。代谢抑制剂和pH对糖转运有明显影响,说明质子/底物同向运输系统是该酵母的主要糖转运系统。     

Production of bioethanol using lignocellulosic hydrolysate by the white rot fungus <Emphasis Type="Italic">Hohenbuehelia</Emphasis> sp. ZW-16

A novel white rot fungus strain Hohenbuehelia sp. ZW-16 was identified and first used for bioethanol production in this study. It was found that the strain could produce bioethanol with glucose, xylose and arabinose under limited oxygen condition. Then, corn straw hydrolysate and corncob hydrolysate (mainly composed of glucose, xylose, and arabinose) were used for bioethanol production; the former substrate could produce more bioethanol in the experiment. The optimal sugar concentration and nitrogen sources were selected (50 g/L corn straw hydrolysate and 10 g/L soybean meals, respectively) and the maximum yield of bioethanol reached 4.6 g/L after 8 days of fermentation.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from a mixture of xylose and glucose by co-cultivation of lactic acid bacteria

The production of optically pure lactic acid in a high yield from xylose or a mixture of xylose and glucose, which is a model hydrolysate of lignocellulose, is described. In a single cultivation, Enterococcus casseliflavus produced 38 g/l of lactic acid with an optical purity of 96% enantiomeric excess (ee) and 6.4 g/l of acetic acid from 50 g/l of xylose when MRS medium was used. When a mixture of 50 g/l of xylose and 100 g/l of glucose was used as the carbon source in a cultivation of E. casseliflavus alone, glucose was converted to lactic acid in the early phase of the cultivation but xylose was hardly consumed. In a co-cultivation where E. casseliflavus and Lactobacillus casei specific for glucose were simultaneously inoculated, little or no lactic acid was produced after the glucose was almost consumed. A co-cultivation with two-stage inoculation (in which E. casseliflavus was added at a cultivation time of 40 h after L. casei cells were inoculated) resulted in complete consumption of 50 g/l of xylose and 100 g/l of glucose. In the co-cultivation, 95 g/l of lactic acid with a high optical purity of 96% ee was obtained at 192 h. Such a co-cultivation using two microorganisms specific for each sugar is considered to be one promising cultivation technique for the efficient production of lactic acid from a sugar mixture derived from lignocellulose.     

Bioethanol from fermentation of cassava pulp in a fibrous-bed bioreactor using immobilized Δldh, a genetically engineered Thermoanaerobacterium aotearoense

There is an increasing worldwide interest in bioethanol production from agricultural, industrial, and urban residues for both ecological and economic reasons. The acid hydrolysis of cassava pulp to reducing sugars and their fermentation to ethanol were evaluated in a fibrousbed bioreactor with immobilized Δldh, a genetically engineered Thermoanaerobacterium aotearoense. A maximum yield of total reducing sugars of 53.5% was obtained after 8 h of hydrolysis at 85oC in 0.4 mol/L hydrochloric acid with a solid-to-liquid ratio of 1:20, which was optimized by using an orthogonal design based on preliminary experiments. In the FBB, the fed-batch fermentation, using glucose as the sole carbon source, gave a maximum ethanol production of 38.3 g/L with a yield of 0.364 g/g in 100 h; whereas the fed-batch fermentation, using xylose as the sole carbon source, gave 34.1 g/L ethanol with a yield of 0.342 g/g in 135 h. When cassava pulp hydrolysate was used as a carbon source, 39.1 g/L ethanol with a yield of 0.123 g/g cassava pulp in185 h was observed, using the fed-batch fermentation model. In addition, for repeated batch fermentation of cassava pulp hydrolysate carried out in the fibrous-bed bioreactor, long-term operation with high ethanol yield and volumetric productivity were achieved. The above results show that the acid hydrolysate of cassava pulp can be used for ethanol production in a fibrous-bed bioreactor, although some inhibition phenomena were observed during the process of fermentation.     

Microbial oil production from rice straw hydrolysate by Trichosporon fermentans

Microbial oil production from sulphuric acid treated rice straw hydrolysate (SARSH) by Trichosporon fermentans was performed for the first time. Fermentation of SARSH without detoxification gave a poor lipid yield of 1.7 g/l, which was much lower than the result with glucose or xylose as the single carbon source (13.6 g/l or 9.9 g/l). The detoxification pretreatment, including overliming, concentration, and adsorption by Amberlite XAD-4 improved the fermentability of SARSH significantly by removing the inhibitors in SARSH. A total biomass of 28.6 g/l with a lipid content of 40.1% (corresponding to a lipid yield of 11.5 g/l) could be achieved after cultivation of T. fermentans on the detoxified SARSH for 8 days. Moreover, besides SARSH, T. fermentans could also utilize mannose, galactose, or cellobiose, in hydrolysates of other natural lignocellulosic materials as the single carbon source to grow and accumulate lipid with a high yield (at least 10.4 g/l). Hence, it is a promising strain for microbial oil production and thus biodiesel preparation from agro-industrial residues, especially lignocellulosic materials.     

发酵性丝孢酵母HWZ004利用水稻秸秆水解液发酵产油脂

为高效利用水稻秸秆中的纤维素和半纤维素产油脂,采用稀酸预处理和酶水解两步法对水稻秸秆进行水解,然后以水解液为碳源,培养发酵性丝孢酵母Trichosporon fermentans HWZ004产微生物油脂。结果表明,经简单overliming法脱毒后水稻秸秆水解液中乙酸、糠醛和5-羟甲基糠醛的浓度分别为0.4 g/L、0.1 g/L和0.05 g/L。只需添加少量氮源和微量CuSO4?5H2O,该水解液即可满足T. fermentans HWZ004发酵产油脂的要求。发酵最适接种量、初始pH和温度分别是5.0％、7.0和25 ℃。T. fermentans HWZ004在优化条件下培养7 d的生物量、油脂含量和油脂产量分别是26.4 g/L,52.2％和13.8 g/L;油脂得率系数为17.0,大大高于驯化前菌株T. fermentans CICC 1368在脱毒水稻秸秆半纤维素水解液中的对应值 (11.9)。所产油脂的脂肪酸组成与植物油相似,不饱和脂肪酸含量达70％以上,宜作为生物柴油的生产原料。     

Ethanol fermentation from lignocellulosic hydrolysate by a recombinant xylose- and cellooligosaccharide-assimilating yeast strain

The sulfuric acid hydrolysate of lignocellulosic biomass, such as wood chips, from the forest industry is an important material for fuel bioethanol production. In this study, we constructed a recombinant yeast strain that can ferment xylose and cellooligosaccharides by integrating genes for the intercellular expressions of xylose reductase and xylitol dehydrogenase from Pichia stipitis, and xylulokinase from Saccharomyces cerevisiae and a gene for displaying β-glucosidase from Aspergillus acleatus on the cell surface. In the fermentation of the sulfuric acid hydrolysate of wood chips, xylose and cellooligosaccharides were completely fermented after 36 h by the recombinant strain, and then about 30 g/l ethanol was produced from 73 g/l total sugar added at the beginning. In this case, the ethanol yield of this recombinant yeast was much higher than that of the control yeast. These results demonstrate that the fermentation of the lignocellulose hydrolysate is performed efficiently by the recombinant Saccharomyces strain with abilities for xylose assimilation and cellooligosaccharide degradation.     

A novel isolate of <Emphasis Type="Italic">Clostridium butyricum</Emphasis> for efficient butyric acid production by xylose fermentation

Bacterial fermentation of lignocellulose has been regarded as a sustainable approach to butyric acid production. However, the yield of butyric acid is hindered by the conversion efficiency of hydrolysate xylose. A mesophilic alkaline-tolerant strain designated as Clostridium butyricum B10 was isolated by xylose fermentation with acetic and butyric acids as the principal liquid products. To enhance butyric acid production, performance of the strain in batch fermentation was evaluated with various temperatures (20–47 °C), initial pH (5.0–10.0), and xylose concentration (6–20 g/L). The results showed that the optimal temperature, initial pH, and xylose concentration for butyric acid production were 37 °C, 9.0, and 8.00 g/L, respectively. Under the optimal condition, the yield and specific yield of butyric acid reached about 2.58 g/L and 0.36 g/g xylose, respectively, with 75.00% butyric acid in the total volatile fatty acids. As renewable energy, hydrogen was also collected from the xylose fermentation with a yield of about 73.86 mmol/L. The kinetics of growth and product formation indicated that the maximal cell growth rate (μ _m ) and the specific butyric acid yield were 0.1466 h^?1 and 3.6274 g/g cell (dry weight), respectively. The better performance in xylose fermentation showed C. butyricum B10 a potential application in efficient butyric acid production from lignocellulose.     

Ethanol production from xylose by Fusarium oxysporum and the optimization of culture conditions

Bioethanol is the most commonly used renewable biofuel as an alternative to fossil fuels. Many microbial strains can convert lignocellulosics into bioethanol. However, very few natural strains with a high capability of fermenting pentose sugars and simultaneously utilizing various sugars have been reported. In this study, fermentation of sugar by Fusarium oxysporum G was performed for the production of ethanol to improve the performance of the fermentation process. The influences of pH, substrate concentration, temperature, and rotation speed on ethanol fermentation are investigated. The three significant factors (pH, substrate concentration, and temperature) are further optimized by quadratic orthogonal rotation regression combination design and response surface methodology (RSM). The optimum conditions are pH 4, 40?g/L of xylose, 32?°C, and 110?rpm obtained through single factor experiment design. Finally, it is found that the maximum ethanol production (10.0?g/L) can be achieved after 7 d of fermentation under conditions of pH 3.87, 45.2?g/L of xylose, and 30.4?°C. Glucose is utilized preferentially for the glucose–xylose mixture during the initial fermentation stage, but glucose and xylose are synchronously consumed without preference in the second period. These findings are significant for the potential industrial application of this strain for bioethanol production.     

Butanol production by Clostridium beijerinckii. Part I: use of acid and enzyme hydrolyzed corn fiber

Fermentation of sulfuric acid treated corn fiber hydrolysate (SACFH) inhibited cell growth and butanol production (1.7 ± 0.2 g/L acetone butanol ethanol or ABE) by Clostridium beijerinckii BA101. Treatment of SACFH with XAD-4 resin removed some of the inhibitors resulting in the production of 9.3 ± 0.5 g/L ABE and a yield of 0.39 ± 0.015. Fermentation of enzyme treated corn fiber hydrolysate (ETCFH) did not reveal any cell inhibition and resulted in the production of 8.6 ± 1.0 g/L ABE and used 24.6 g/L total sugars. ABE production from fermentation of 25 g/L glucose and 25 g/L xylose was 9.9 ± 0.4 and 9.6 ± 0.4 g/L, respectively, suggesting that the culture was able to utilize xylose as efficiently as glucose. Production of only 9.3 ± 0.5 g/L ABE (compared with 17.7 g/L ABE from fermentation of 55 g/L glucose-control) from the XAD-4 treated SACFH suggested that some fermentation inhibitors may still be present following treatment. It is suggested that inhibitory components be completely removed from the SACFH prior to fermentation with C. beijerinckii BA101. In our fermentations, an ABE yield ranging from 0.35 to 0.39 was obtained, which is higher than reported by the other investigators.