Winter hardiness of Miscanthus (II): Genetic mapping for overwintering ability and adaptation traits in three interconnected Miscanthus populations

Miscanthus × giganteus (M×g) is the primary species of Miscanthus for bioenergy feedstock production. The current leading biomass cultivar, M×g ‘1993‐1780’, is insufficiently adapted in temperate regions with cold winters such as USDA hardiness zone 5 (average annual minimum temperature of ?28.9 to ?23.3°C) or lower. Three interconnected Miscanthus F₁ populations that shared a common parent were planted in a replicated field trial at Urbana, IL (hardiness zone 5b; average annual minimum temperature of ?26.1 to ?23.3°C) in spring 2011. The winter of 2013–2014 was especially cold in Urbana, with a minimum soil temperature at 10 cm of ?6.2°C and a minimum air temperature of ?25.3°C, giving us an opportunity to evaluate hardiness on established year‐3 plants. The parent in common to all three populations, M. sinensis ssp. condensatus ‘Cosmopolitan’, is native to maritime southern Japan, and in Urbana, it is winter‐damaged most years. In contrast, the three other parents, M. sacchariflorus ‘Robustus’ (MapA), M. sinensis ‘Silberturm’ (MapB), and M. sinensis ‘November Sunset’ (MapC), are typically winter hardy in Urbana. Nearly all MapA progeny plants survived and grew vigorously in spring 2014, whereas in MapB and MapC, many progeny plants did not survive the winter, and most of the survivors were severely damaged, with poor vigor. Negative correlations between overwintering ability and spring regrowth date and autumn dormancy date suggested that the genotypes most likely to survive winters were those that emerged early in spring and/or went dormant early in autumn. Using joint‐population analysis, we identified 53 quantitative trait loci (QTLs) for nine adaptation traits, including nine QTLs for overwintering ability and 11 for spring hardiness scores. Many biologically intuitive candidate genes were observed within or near the QTLs detected in this study, suggesting their validity and potential for further study.     

Genetic mapping of biomass yield in three interconnected Miscanthus populations

Improving biomass yield is a major goal of Miscanthus breeding. We conducted a study on one interspecific Miscanthus sinensis × Miscanthus sacchariflorus F₁ population and two intraspecific M. sinensis F₁ populations, each of which shared a common parent. A field trial was established at Urbana, IL during spring 2011, and phenotypic data were collected in 2012 and 2013 for fourteen yield traits. Six high‐density parental genetic maps, as well as a consensus genetic map integrating M. sinensis and M. sacchariflorus, were developed via the pseudotestcross strategy for noninbred parents with ≥1214 single‐nucleotide polymorphism markers generated from restriction site‐associated DNA sequencing. We confirmed for the first time a whole‐genome duplication in M. sacchariflorus relative to Sorghum bicolor, similar to that observed previously for M. sinensis. Four quantitative trait locus (QTL) analysis methods for detecting marker‐trait associations were compared: (1) individual parental map composite interval mapping analysis, (2) individual parental map stepwise analysis, (3) consensus map single‐population stepwise analysis and (4) consensus map joint‐population stepwise analysis. These four methods detected 288, 264, 133 and 109 total QTLs, which resolved into 157, 136, 106 and 86 meta‐QTLs based on QTL congruency, respectively, including a set of 59 meta‐QTLs common to all four analysis methods. Composite interval mapping and stepwise analysis co‐identified 118 meta‐QTLs across six parental maps, suggesting high reliability of stepwise regression in QTL detection. Joint‐population stepwise analysis yielded the highest resolution of QTLs compared to the other three methods across all meta‐QTLs. Strong, frequently advantageous transgressive segregation in the three populations indicated a promising future for breeding new higher‐yielding cultivars of Miscanthus.     

Quantitative trait locus (QTL) analysis of fruit-quality traits for mandarin breeding in Japan

The improvement of fruit quality is an important objective in citrus breeding. Using an F₁ segregating population from a cross between citrus cultivars ‘Harehime’ (‘E647’—‘Kiyomi’ [Citrus unshiu Marcow. ‘Miyagawa Wase’ × Citrus sinensis (L.) Osbeck ‘Trovita’] × ‘Osceola’—a cultivar of clementine [Citrus clementina hort. ex Tanaka] × ‘Orland’ [Citrus paradisi Macfad. ‘Duncan’ × Citrus tangerina hort. ex Tanaka] × ‘Miyagawa Wase’) and ‘Yoshida’ ponkan (Citrus reticulata Blanco ‘Yoshida’), a SNP-based genetic linkage map was constructed and quantitative trait locus (QTL) mapping of four fruit-quality traits (fruit weight, sugar content, peel puffing, and water rot) was performed. The constructed genetic linkage map of ‘Harehime’ consisted of 442 single nucleotide polymorphisms (SNPs) on 9 linkage groups (LGs) and covered 635.8 cM of the genome, while that of ‘Yoshida’ ponkan consisted of 332 SNPs on 9 LGs and covered 892.9 cM of its genome. We identified four QTLs associated with fruit weight, one QTL associated with sugar content, three QTLs associated with peel puffing, and one QTL associated with water rot. For these QTL regions, we estimated the haplotypes of the crossed parents and verified the founding cultivars that these QTLs were originated from and their inheritance in descendant cultivars using pedigree information. QTLs identified in this study provide useful information for marker-assisted breeding of citrus in Japan.     

SSR-based genetic mapping and QTL analysis for timing of spring bud flush,young shoot color,and mature leaf size in tea plant (<Emphasis Type="Italic">Camellia sinensis</Emphasis>)

Tea plant (Camellia sinensis) is a major beverage crop across the world. To uncover the genetic controls of agronomic traits and facilitate marker-assisted breeding (MAB) in tea plant, we constructed a saturated SSR-based linkage map using an F₁ population derived from the crossing of ‘Longjin43’ × ‘Baihaozao’. A total of 483 SSR markers, consisting of 117 novel loci, 129 transferred from other tea plant maps, and 237 previously mapped, were successfully integrated into a new consensus map. The map has 15 linkage groups, covering 1226.2 cM in total with an average marker distance of 2.5 cM. The 126 markers in common enabled us to align this map to the reference genetic maps of tea plant. Phenotype data were collected in 2014 and 2015 for five traits: timing of spring bud flush (TBF), young shoot color (YSC), mature leaf length (MLL), mature leaf width (MLW), and leaf shape index (LSI, i.e., MLL/MLW). QTL analyses were performed for the five traits using the new consensus map and 15 QTLs were identified. The SSR markers, linkage map, and QTLs reported here are useful resources for future QTL mining, identification of causal genes, and MAB in tea plant.     

Identification of quantitative trait loci for yield and yield components in an advanced backcross population derived from the<Emphasis Type="Italic"> Oryza sativa</Emphasis> variety IR64 and the wild relative<Emphasis Type="Italic"> O. rufipogon</Emphasis>

A BC₂F₂ population developed from an interspecific cross between Oryza sativa (cv IR64) and O. rufipogon (IRGC 105491) was used in an advanced backcross QTL analysis to identify and introduce agronomically useful genes from this wild relative into the cultivated gene pool. The objectives of this study were: (1) to identify putative yield and yield component QTLs that can be useful to improve the elite cultivar IR64; (2) to compare the QTLs within this study with previously reported QTLs in rice as the basis for identifying QTLs that are stable across different environments and genetic backgrounds; and (3) to compare the identified QTLs with previously reported QTLs from maize to examine the degree of QTL conservation across the grass family. Two hundred eighty-five families were evaluated in two field environments in Indonesia, with two replications each, for 12 agronomic traits. A total of 165 markers consisting of 131 SSRs and 34 RFLPs were used to construct the genetic linkage map. By employing interval mapping and composite interval mapping, 42 QTLs were identified. Despite its inferior performance, 33% of the QTL alleles originating from O. rufipogon had a beneficial effect for yield and yield components in the IR64 background. Twenty-two QTLs (53.4%) were located in similar regions as previously reported rice QTLs, suggesting the existence of stable QTLs across genetic backgrounds and environments. Twenty QTLs (47.6%) were exclusively detected in this study, uncovering potentially novel alleles from the wild, some of which might improve the performance of the tropical indica variety IR64. Additionally, several QTLs for plant height, grain weight, and flowering time detected in this study corresponded to homeologous regions in maize containing previously detected maize QTLs for these traits.     

Bulk segregant analysis with molecular markers and its use for improving drought resistance in maize

The usual method to locate and compare loci regulating quantitative traits (QTLs) requires a segregating population of plants with each one genotyped with molecular markers. However, plants from such segregating populations can also be grouped according to phenotypic expression of a trait and tested for differences in allele frequency between the population bulks: bulk segregant analysis (BSA). The same probes used for making a genetic map (e.g. isozyme, RFLP, RAPD, etc) can be used for BSA. A molecular marker showing polymorphism between the parents of the population and which is closely-linked to a major QTL regulating a particular trait will mainly co-segregate with that QTL, i.e. segregate according to the phenotype if the QTL has a large effect. Thus, if plants are grouped according to expression of the trait and extreme groups tested with that polymorphic marker, the frequency of the two marker alleles present within each of the two bulks should deviate significantly from the ratio of 1 : 1 expected for most populations. As chromosomal locations of many molecular markers have now been determined in many species, the map location of closely-linked QTLs can therefore be deduced without having to genotype every individual in segregating populations. This has been used successfully with composite populations of maize to locate QTLs associated with yield under severe drought. An inbred line derived from one of the populations selected for higher drought yield has been crossed with a drought-susceptible inbred line to produce a mapping population for QTL analysis of physiological and developmental traits likely to regulate yield under drought. Future work to identify traits having QTLs with flanking markers showing significant allele frequency differences in the GSA studies will indicate those traits likely to be important in determining yield under drought.Key words: Bulk segregant analysis (BSA), drought resistance, genetic maps, maize, molecular markers, Zea mays (L.).      

Detection of quantitative trait loci influencing growth trajectories of adventitious roots in Populus using functional mapping

The capacity to root from cuttings is a key factor for the mass deployment of superior genotypes in clonal forestry. We studied the genetic basis of rooting capacity by mapping quantitative trait loci (QTLs) that control growth rate and form of root traits in a full-sib family of 93 hybrids derived from an interspecific cross between two Populus species, P. deltoides and P. euramericana. The hybrid family was typed for different marker systems (including SSRs, AFLPs, RAPDs, ISSRs, and SNPs), leading to the construction of two linkage maps based on the female P. deltoides (D map) and male P. euramericana (E map) with a pseudotestcross mapping strategy. The two maps were scanned by functional mapping to detect QTLs that control early growth trajectories of two rooting traits, maximal single-root length and the total number of roots per cutting, measured at five time points in water culture. Of the six QTLs detected for these two growth traits, only one is segregating in P. deltoides with poor rooting capacity, while the other five are segregating in P. euramericana showing good rooting capacity. Tests with functional mapping suggest different developmental patterns of the genetic effects of these root QTLs in time course. Five QTLs were detected to change their effects on root growth trajectories with time, whereas one detected to affect root growth consistently in time course. Knowledge about the genetic and developmental control mechanisms of root QTLs will have important implications for the genetic improvement of vegetative propagation traits in Populus.     

Long‐term yield and performance of 15 different Miscanthus genotypes in southwest Germany

A field experiment with 15 Miscanthus genotypes including M. × giganteus, M. sacchariflorus, M. sinensis and M. sinensis hybrids was conducted for 14 years at the experimental Ihinger Hof station of the University of Hohenheim in southwest Germany to evaluate interannual yield performance stability over 14 years of harvests of the different genotypes. In this article, a simple formula is presented which could be used to forecast late winter yields using morphological traits in autumn. The data obtained indicated a shorter establishment period to reach a yield plateau of M. × giganteus and M. sacchariflorus than M. sinensis hybrids and M. sinensis genotypes. The best performing genotype was M. × giganteus (Gig‐2, No. 16.21) with a mean spring harvestable yield of 14.1 t DM ha^?1 year^?1. A correlation analysis with climatic parameters revealed precipitation during the growing period as the key factor for high yields at this site. Likewise, but to a lesser degree, heat sum during the growing period was positively correlated with yields. It could be shown that precipitation/snow during the winter correlated with yield losses, until the harvest date in February/March. Phenological measurements indicated that a high yield potential of the tested genotypes is associated with either an absence of flowering or late flowering. Also, height of the plants and shoot diameter were indicators for high yield potential. Shoot density and plant height at senescence were found to be solid parameters to estimate harvestable biomass in late winter. Yield approximations with a mean accuracy of 80.9% for M.× giganteus genotypes were obtained using the newly developed equation. Yields of M. sinensis hybrid (Sin‐H7) were projected most accurately with this simple formula, resulting in a mean accuracy of 84.5%.     

Identification of QTLs affecting adaptive traits in Castanea sativa Mill

A QTL analysis for three different adaptive traits was performed in an F₁ progeny of Castanea sativa Mill. The female and male parents originated from two Turkish chestnut populations adapted to a drought and humid environment, respectively. QTLs for bud flush, growth and carbon isotope discrimination were detected over a 3‐year period. Bud set was also recorded in the last year of measurement. Thirty‐five individual QTLs were detected for phenology, 28 for growth and 17 for carbon isotope discrimination, most of them explaining a low to moderate proportion of the total phenotypic variance. QTLs were distributed throughout the whole genome. Temporally stable QTLs were identified for all the traits analysed, with phenology showing the higher proportion of stable QTLs. Interesting phenotypic correlations and co‐localizations among QTLs for different adaptive traits were observed, allowing the formulation of an hypothesis about the genetic adaptation of the female parent to drought.     

Analysis of quantitative trait loci (QTLs) and quantitative trait alleles (QTAs) for potato tuber yield and starch content

 Using RFLP markers, QTLs for tuber starch-content and tuber yield were mapped in two F₁ populations derived from crossing non-inbred di-haploid potato breeding lines. QTLs were identified and mapped, based on both single-marker tests and interval analyses. A model specifically developed for interval QTL analysis in non-inbred plant species was successfully applied for the first time to experimental data. Results of both methods of QTL analysis were similar but not identical. QTLs for tuber starch-content and tuber yield were analysed in segregating populations K31 and LH in five and two environments, respectively. Population K31 was fully genotyped whereas population LH was selectively genotyped according to high and low tuber-starch content. Eighteen putative QTLs for tuber starch-content were identified on all 12 potato linkage groups and eight putative QTLs for tuber yield were identified on eight linkage groups. Twenty of twenty six putative QTLs were reproducibly detected in at least two environments and/or mapping populations. Few major QTLs for tuber starch-content were highly stable across environments but were detected in only one of the two mapping populations analysed. Most QTLs for tuber yield were linked with QTLs for tuber starch-content suggesting that the effects on both traits are controlled by the same genetic factors. The results are discussed with respect to marker-assisted selection in potato. Received: 9 March 1998 / Accepted: 29 April 1998     

Plastid genome characterisation in Brassica and Brassicaceae using a new set of nine SSRs

The objective of the present study was to identify favourable exotic Quantitative Trait Locus (QTL) alleles for the improvement of agronomic traits in the BC₂DH population S42 derived from a cross between the spring barley cultivar Scarlett and the wild barley accession ISR42-8 (Hordeum vulgare ssp. spontaneum). QTLs were detected as a marker main effect and/or a marker × environment interaction effect (M × E) in a three-factorial ANOVA. Using field data of up to eight environments and genotype data of 98 SSR loci, we detected 86 QTLs for nine agronomic traits. At 60 QTLs the marker main effect, at five QTLs the M × E interaction effect, and at 21 QTLs both the effects were significant. The majority of the M × E interaction effects were due to changes in magnitude and are, therefore, still valuable for marker assisted selection across environments. The exotic alleles improved performance in 31 (36.0%) of 86 QTLs detected for agronomic traits. The exotic alleles had favourable effects on all analysed quantitative traits. These favourable exotic alleles were detected, in particular on the short arm of chromosome 2H and the long arm of chromosome 4H. The exotic allele on 4HL, for example, improved yield by 7.1%. Furthermore, the presence of the exotic allele on 2HS increased the yield component traits ears per m² and thousand grain weight by 16.4% and 3.2%, respectively. The present study, hence, demonstrated that wild barley does harbour valuable alleles, which can enrich the genetic basis of cultivated barley and improve quantitative agronomic traits.     

Identification of QTLs for Drought-Related Traits in Alien Introgression Lines Derived from Crosses of Rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> cv. IR64) × <Emphasis Type="Italic">O. glaberrima</Emphasis> under Lowland Moisture Stress

Drought is a major abiotic stress that limits rice productivity in rain-fed and upland ecosystems. African rice, Oryza glaberrima, has low yields but is tolerant to drought and other stresses. We evaluated 513 BC₂F₃ progenies from alien introgression lines (AILs) that were derived from crosses of Oryza sativa (IR64) × O. glaberrima. They were assessed for yield and other traits when grown under drought at two locations. Such conditions reduced grain production by 59% compared with the recurrent parent (IR64). However, 33 AILs had higher yields, thus demonstrating their potential as genetic material for transferring drought-related traits from O. glaberrima to O. sativa. A set of 200 AILs was selectively genotyped with 173 simple sequence repeat and sequenced tagged site markers. Molecular analysis showed that a mean of 4.5% of the O. glaberrima genome was introgressed in BC₂F₃ AILs. Our analysis revealed 33 quantitative trait loci (QTLs; including 10 novel) for different traits. O. glaberrima contributed 50% of the alleles to those newly identified QTLs, with one for grain yield per plant (ypp9.1) being new. A QTL at RM208 on chromosome 2 positively affected yield under stress, accounting for 22% of the genetic variation. Our identification of drought-related QTLs for yield and yield components will be useful to future research efforts in marker-assisted selection.     

Molecular mapping of QTLs for fiber qualities in three diverse lines in Upland cotton using SSR markers

The improvement of cotton fiber quality is extremely important because of changes in spinning technology. The identification of the stable QTLs affecting fiber traits across different generations will be greatly helpful to be used effectively in molecular marker-assisted selection to improve fiber quality of cotton cultivars in the future. Using three elite fiber lines of Upland cotton (Gossypium hirsutum L.) as parents, three linkage maps were constructed to tag QTLs for fiber qualities using SSR markers. There were 39 QTLs, 17 significant QTLs, LOD 3.0 and 22 suggestive QTLs, 3.0 > LOD 2.0, detected by composite interval mapping for fiber traits, in which 11 QTLs were for fiber length, 10 for fiber strength, 9 for micronaire and 9 for fiber elongation. Out of 17 significant QTLs, 5 QTLs with high logarithm of odds (LOD) score value and stable effect could be found in both F₂ and F_2:3 segregating populations, showing a great potential for molecular-assisted selection in improving fiber quality. At least three common QTLs could be identified in two populations. These common QTLs detected in different populations suggested that there existed elite fiber genes and possibly of the same origin. In addition, we found three pairs of putative homoeologous QTLs, qFL-7-1c and qFL-16-1c, qFS-D03-1a, qFS-A02-1b and qFS-A02-1c, and qFE–D03-1a and qFE-A02-1c. Our results provided a better understanding of the genetic factors of fiber traits in AD tetraploid cottons.     

Mapping of quantitative trait loci controlling adaptive traits in coastal Douglas-fir. II. Spring and fall cold-hardiness

Quantitative trait loci (QTLs) affecting fall and spring cold-hardiness were identified in a three-generation outbred pedigree of coastal Douglas-fir [Pseudotsuga meniziesii (Mirb.) Franco var. menziesii]. Eleven QTLs controlling fall cold-hardiness were detected on four linkage groups, and 15 QTLs controlling spring cold-hardiness were detected on four linkage groups. Only one linkage group contained QTLs for both spring and fall cold-hardiness, and these QTLs tended to map in close proximity to one another. Several QTLs were associated with hardiness in all three shoot tissues assayed in the spring, supporting previous reports that there is synchronization of plant tissues during de-acclimatization. For fall cold-hardiness, co-location of QTLs was not observed for the different tissues assayed, which is consistent with previous reports of less synchronization of hardening in the fall. In several cases, QTLs for spring or fall cold-hardiness mapped to the same location as QTLs controlling spring bud flush. QTL estimations, relative magnitudes of heritabilities, and genetic correlations based on clonal data in this single full-sib family, supports conclusions about the genetic control and relationships among cold-hardiness traits observed in population samples of Douglas-fir in previous studies. Received: 20 July 2000 / Accepted: 19 October 2000     

Identification of candidate genes for key fibre‐related QTLs and derivation of favourable alleles in Gossypium hirsutum recombinant inbred lines with G. barbadense introgressions

Fine mapping QTLs and identifying candidate genes for cotton fibre‐quality and yield traits would be beneficial to cotton breeding. Here, we constructed a high‐density genetic map by specific‐locus amplified fragment sequencing (SLAF‐seq) to identify QTLs associated with fibre‐quality and yield traits using 239 recombinant inbred lines (RILs), which was developed from LMY22 (a high‐yield Gossypium hirsutumL. cultivar) × LY343 (a superior fibre‐quality germplasm with G. barbadenseL. introgressions). The genetic map spanned 3426.57 cM, including 3556 SLAF‐based SNPs and 199 SSR marker loci. A total of 104 QTLs, including 67 QTLs for fibre quality and 37 QTLs for yield traits, were identified with phenotypic data collected from 7 environments. Among these, 66 QTLs were co‐located in 19 QTL clusters on 12 chromosomes, and 24 QTLs were detected in three or more environments and determined to be stable. We also investigated the genomic components of LY343 and their contributions to fibre‐related traits by deep sequencing the whole genome of LY343, and we found that genomic components from G. hirsutum races (which entered LY343 via its G. barbadense parent) contributed more favourable alleles than those from G. barbadense. We further identified six putative candidate genes for stable QTLs, including Gh_A03G1147 (GhPEL6), Gh_D07G1598 (GhCSLC6) and Gh_D13G1921 (GhTBL5) for fibre‐length QTLs and Gh_D03G0919 (GhCOBL4), Gh_D09G1659 (GhMYB4) and Gh_D09G1690 (GhMYB85) for lint‐percentage QTLs. Our results provide comprehensive insight into the genetic basis of the formation of fibre‐related traits and would be helpful for cloning fibre‐development‐related genes as well as for marker‐assisted genetic improvement in cotton.     

QTL mapping for fiber yield-related traits by constructing the first genetic linkage map in ramie (Boehmeria nivea L. Gaud)

Ramie fiber extracted from stem bast is one of the most important natural fibers. The fiber yield of ramie is a valuable trait and is decided by several components, including stem number per plant (SN), the fiber yield per stem (FYPS), stem length (SL), stem diameter (SD), and bark thickness (BT). All of these fiber yield-related traits are inherited in a quantitative manner. The genetic basis for these traits is still uncharacterized, which has hindered the improvement of yield traits through selective ramie breeding. In this study, an F₂ population derived from two ramie varieties, Zhongzhu 1 and Qingyezhuma, with striking differences in fiber yield-related traits, was used for cutting propagation and to develop an F₂ agamous line (FAL) population. A genetic linkage map with 132 DNA loci spanning 2,265.1 cM was first constructed. The analysis of quantitative trait locus (QTL) for fiber yield-related traits was performed in ramie for the first time. Finally, a total of 6, 9, 5, 7, and 6 QTLs for FYPS, SL, SN, SD, and BT, respectively, were identified in the FAL population in two environments. Among these 33 QTLs, 9 QTLs were detected in both environments and 24 QTLs exhibited overdominance. The overdominance of these QTLs possibly contributed to the heterosis of these yield-related traits in ramie. Moreover, there were 7 QTL clusters identified. The identification of the QTLs for fiber yield-related traits will be helpful for improving the fiber yield in ramie breeding programs.     

QTL mapping for yield and photosynthetic related traits under different water regimes in wheat

The improvement for drought tolerance requires understanding of the genetic control of wheat (Triticum aestivum L.) reaction to drought. In this study, a set of 131 recombinant inbred lines of wheat were investigated under well-watered (WW) and drought stress (DS) environments across 2 years to map quantitative trait loci (QTLs) for yield and physiological traits. A total of 225 QTLs were detected, including 32 non-environment-specific loci that were significant in both DS and WW, one drought-specific locus and two watering-specific loci. Three consistently-expressed QTLs (QTkw-3A.2, QTss-1A, and QScn-7A.1) were identified in at least three environments and the QTkw-1D.1 was significant in DS across the 2 years. By unconditional and conditional QTL analysis, spike number per plant and kernel number per spike were more important than thousand-kernel weight for grain yield (GY) at the given genetic background. Meta-analysis identified 67 meta-QTLs that contained QTLs for at least two traits. High frequency co-location of QTLs was found among either the spike-related traits or the six physiological traits. Four photosynthesis traits (CHL, LWUE, P _N, and C _i) were co-located with GY and/or yield components on various MQTLs. The results provided QTLs that warrant further study for drought tolerance breeding and are helpful for understanding the genetic basis of drought tolerance and the genetic contribution of yield components to GY at individual QTL level in wheat.     

A molecular linkage map with associated QTLs from a hulless × covered spring oat population

In spring-type oat (Avena sativa L.), quantitative trait loci (QTLs) detected in adapted populations may have the greatest potential for improving germplasm via marker-assisted selection. An F₆ recombinant inbred (RI) population was developed from a cross between two Canadian spring oat varieties: Terra, a hulless line, and Marion, an elite covered-seeded line. A molecular linkage map was generated using 430 AFLP, RFLP, RAPD, SCAR, and phenotypic markers scored on 101 RI lines. This map was refined by selecting a robust set of 124 framework markers that mapped to 35 linkage groups and contained 35 unlinked loci. One hundred one lines grown in up to 13 field environments in Canada and the United States between 1992 and 1997 were evaluated for 16 agronomic, kernel, and chemical composition traits. QTLs were localized using three detection methods with an experiment-wide error rate of approximately 0.05 for each trait. In total, 34 main-effect QTLs affecting the following traits were identified: heading date, plant height, lodging, visual score, grain yield, kernel weight, milling yield, test weight, thin and plump kernels, groat -glucan concentration, oil concentration, and protein. Several of these correspond to QTLs in homologous or homoeologous regions reported in other oat QTL studies. Twenty-four QTL-by-environment interactions and three epistatic interactions were also detected. The locus controlling the covered/hulless character (N1) affected most of the traits measured in this study. Additive QTL models with N1 as a covariate were superior to models based on separate covered and hulless sub-populations. This approach is recommended for other populations segregating for major genes. Marker-trait associations identified in this study have considerable potential for use in marker-assisted selection strategies to improve traits within spring oat breeding programs.Communicated by P. Langridge     

Genetic basis and mapping of the resistance to rice yellow mottle virus. II. Evidence of a complementary epistasis between two QTLs

 The genetic basis of resistance to rice yellow mottle virus (RYMV) was studied in a doubled-haploid (DH) population derived from a cross between the very susceptible indica variety ‘IR64’ and the resistant upland japonica variety Azucena. As a quantitative trait locus (QTL) involved in virus content estimated with an ELISA test has been previously identified on chromosome 12, we performed a wide search for interactions between this QTL and the rest of the genome, and between this QTL and morphological traits segregating in the population. Multiple regression with all identified genetic factors was used to validate the interactions. Significant epistasis accounting for a major part of the total genetic variation was observed. A complementary epistasis between the QTL located on chromosome 12 and a QTL located on chromosome 7 could be the major genetic factor controlling the virus content. Resistance was also affected by a morphology-dependent mechanism since tillering was interfering with the resistance mechanism conditioned by the epistasis between the two QTLs. Marker-assisted backcross breeding was developed to introgress the QTLs of chromosome 7 and chromosome 12 in the susceptible ‘IR64’ genetic background. First results confirmed that if both QTLs do not segregate in a backcross-derived F₂ population, then the QTL of chromosome 12 cannot explain differences in virus content. A near-isogenic line (NIL) approach is currently being developed to confirm the proposed genetic model of resistance to RYMV. Received: 20 April 1990 / Accepted: 30 April 1998     

Biomass yield in a genetically diverse Miscanthus sinensis germplasm panel evaluated at five locations revealed individuals with exceptional potential

To breed improved biomass cultivars of Miscanthus ×giganteus, it will be necessary to select the highest‐yielding and best‐adapted genotypes of its parental species, Miscanthus sinensis and Miscanthus sacchariflorus. We phenotyped a diverse clonally propagated panel of 569 M. sinensis and nine natural diploid M. ×giganteus at one subtropical (Zhuji, China) and five temperate locations (Sapporo, Japan; Leamington, Ontario, Canada; Fort Collins, CO; Urbana, IL; and Chuncheon, Korea) for dry biomass yield and 14 yield‐component traits, in trials grown for 3 years. Notably, dry biomass yield of four Miscanthus accessions exceeded 80 Mg/ha in Zhuji, China, approaching the highest observed for any land plant. Additionally, six M. sinensis in Sapporo, Japan and one in Leamington, Canada also yielded more than the triploid M. ×giganteus ‘1993‐1780’ control, with values exceeding 20 Mg/ha. Diploid M. ×giganteus was the best‐yielding group at the northern sites. Genotype‐by‐environment interactions were modest among the five northern trial sites but large between Zhuji, and the northern sites. M. sinensis accessions typically yielded best at trial sites with latitudes similar to collection sites, although broad adaptation was observed for accessions from southern Japan. Genotypic heritabilities for third year yields ranged from 0.71 to 0.88 within locations. Compressed circumference was the best predictor of yield. These results establish a baseline of data for initiating selection to improve biomass yield of M. sinensis and M. ×giganteus in a diverse set of relevant geographies.