Plasmon‐Enhanced Polymer Photovoltaic Device Performance Using Different Patterned Ag/PVP Electrospun Nanofibers

Significant enhancement of P3HT (poly(3‐hexylthiophene)):PC₆₁BM ([6,6]‐phenyl C61‐butyric acid methyl ester) photovoltaic devices using different patterns of electrospun Ag/PVP composite nanofibers, including nonwoven, aligned, and crossed patterns, is reported. The composite electrospun nanofibers are prepared using in situ reduction of silver (Ag) nanoparticles in Ag/poly(vinyl pyrrolidone) (PVP) via a two‐fluid coaxial electrospinning technique. The composition, crystalline orientation, and particle size of Ag are manipulated by controlling the core/shell solution concentration. The smallest diameter of the composite nanofibers leads to the highest orientation of the Ag nanoparticles and results in the largest conductivity due to geometric confinement. Such composite nanofibers exhibit the surface plasmon resonance (SPR) effect, which provides near field enhancement of electromagnetic field around active layer. Additionally, composite nanofibers with the crossed or nonwoven patterns further enhance high carrier mobility, compared to that of the aligned pattern. It leads to the 18.7% enhancement of the power conversion efficiency of photovoltaic cell compared to the parent device. The results indicate that the high conductivity and SPR effect of the Ag/PVP electrospun nanofibers can significantly improve the photocurrent and PCE, leading to promising organic solar cell applications.     

Back Cover: Characterization and application of porous gold nanoparticles as 2‐photon luminescence imaging agents: 20‐fold brighter than gold nanorods (J. Biophotonics 2/2018)

Gold nanoparticles serve as imaging contrast agents useful for two‐photon nonlinear microscopy of biological cells and tissues. In this study, 100‐nm‐sized gold particles with a multitude of nanopores embedded inside have been physically synthesized and investigated for the plasmonic enhancement in two‐photon luminescence. Exhibiting remarkable potential for two‐photon imaging, the porous gold nanoparticles boost near‐infrared light absorption substantially and allow emission signals 20 times brighter than gold nanorods being currently used as typical imaging agents. Further details can be found in the article by Joo H. Park et al. ( e201700174 )

     

Analyzing the Movement of the Nauplius 'Artemia salina' by Optical Tracking of Plasmonic Nanoparticles

We demonstrate how optical tweezers may provide a sensitive tool to analyze the fluidic vibrations generated by the movement of small aquatic organisms. A single gold nanoparticle held by an optical tweezer is used as a sensor to quantify the rhythmic motion of a Nauplius larva (Artemia salina) in a water sample. This is achieved by monitoring the time dependent displacement of the trapped nanoparticle as a consequence of the Nauplius activity. A Fourier analysis of the nanoparticle''s position then yields a frequency spectrum that is characteristic to the motion of the observed species. This experiment demonstrates the capability of this method to measure and characterize the activity of small aquatic larvae without the requirement to observe them directly and to gain information about the position of the larvae with respect to the trapped particle. Overall, this approach could give an insight on the vitality of certain species found in an aquatic ecosystem and could expand the range of conventional methods for analyzing water samples.     

DNA‐Functionalized Plasmonic Nanomaterials for Optical Biosensing

Plasmonic nanomaterials, especially Au and Ag nanomaterials, have shown attractive physicochemical properties, such as easy functionalization and tunable optical bands. The development of this active subfield paves the way to the fascinating biosensing platforms. In recent years, plasmonic nanomaterials–based sensors have been extensively investigated because they are useful for genetic diseases, biological processes, devices, and cell imaging. In this account, a brief introduction of the development of optical biosensors based on DNA‐functionalized plasmonic nanomaterials is presented. Then the common strategies for the application of the optical sensors are summarized, including colorimetry, fluorescence, localized surface plasmon resonance, and surface‐enhanced resonance scattering detection. The focus is on the fundamental aspect of detection methods, and then a few examples of each method are highlighted. Finally, the opportunities and challenges for the plasmonic nanomaterials–based biosensing are discussed with the development of modern technologies.     

Enhanced Light Harvesting in Organic Solar Cells Featuring a Biomimetic Active Layer and a Self‐Cleaning Antireflective Coating

Advanced light manipulation is extremely attractive for applications in organic optoelectronics to enhance light harvesting efficiency. A novel method of fabricating high‐efficiency organic solar cells (OSCs) is proposed using biomimetic moth eye nanostructures in a quasi‐periodic gradient shape active layer and an antireflective coating. A 24.3% increase in photocurrent is realized without sacrificing dark electrical properties, yielding a 22.2% enhancement in power conversion efficiency to a record of 7.86% for OSCs with a poly(3‐hexylthiophene‐2,5‐diyl):indene‐C60 bis‐adduct (P3HT:ICBA) active layer. The experimental and theoretical characterizations verify that the substantial improvement of OSCs is mainly ascribed to the self‐enhanced absorption resulting from the broadband polarization‐insensitive light trapping in biomimetic nanostructured active layer, the reduction in reflectance by the antireflective coating, and surface plasmonic effect excited by corrugated metallic electrode. It is noteworthy that the pathway described here is promising for opening up opportunities to realize high‐performance OSCs towards the future photovoltaic applications.     

Hybrid Dye‐Titania Nanoparticles for Superior Low‐Temperature Dye‐Sensitized Solar Cells

In this work, a new strategy to design low‐temperature (≤200 °C) sintered dye‐sensitized solar cells (lt‐DSSC) is reported to enhance charge collection efficiencies (η_coll), photoconversion efficiencies (η), and stabilities under continuous operation conditions. Realization of lt‐DSSC is enabled by the integration of hybrid nanoparticles based on TiO₂‐Ru(II) complex (TiO₂_Ru_IS)—obtained by in situ bottom‐up construction of Ru(II) N3 dye‐sensitized titania—into the photoelectrode. Incentives for the use of TiO₂_Ru_IS are i) dye stability due to its integration into the TiO₂ anatase network and ii) enhanced charge collection yield due to its significant resistance toward electron recombination with electrolytes. It is demonstrated that devices with single‐layer photoelectrodes featuring blends of P25 and TiO₂_Ru_IS give rise to a 60% η_coll relative to a 46% η_coll for devices with P25‐based photoelectrodes. Responsible for this trend is a better charge transport and a reduced electron recombination. When using a multilayered photoelectrode architecture with a top layer based only on TiO₂_Ru_IS, devices with an even higher η_coll (74%) featuring a η of around 8.75% and stabilities of 600 h are achieved. This represents the highest values reported for lt‐DSSC to date.     

Synthesis,Characterization, and Functionalization of Hybrid Au/CdS and Au/ZnS Core/Shell Nanoparticles

Plasmonic nanoparticles are an attractive material for light harvesting applications due to their easily modified surface, high surface area and large extinction coefficients which can be tuned across the visible spectrum. Research into the plasmonic enhancement of optical transitions has become popular, due to the possibility of altering and in some cases improving photo-absorption or emission properties of nearby chromophores such as molecular dyes or quantum dots. The electric field of the plasmon can couple with the excitation dipole of a chromophore, perturbing the electronic states involved in the transition and leading to increased absorption and emission rates. These enhancements can also be negated at close distances by energy transfer mechanism, making the spatial arrangement of the two species critical. Ultimately, enhancement of light harvesting efficiency in plasmonic solar cells could lead to thinner and, therefore, lower cost devices. The development of hybrid core/shell particles could offer a solution to this issue. The addition of a dielectric spacer between a gold nanoparticles and a chromophore is the proposed method to control the exciton plasmon coupling strength and thereby balance losses with the plasmonic gains. A detailed procedure for the coating of gold nanoparticles with CdS and ZnS semiconductor shells is presented. The nanoparticles show high uniformity with size control in both the core gold particles and shell species allowing for a more accurate investigation into the plasmonic enhancement of external chromophores.     

Plasmonic Biosensor Controlled by DNAzyme for On‐Site Genetic Detection of Pathogens

On‐site predetection of pathogens could significantly decrease of a disease outbreak or national loss in most of the countries. However, conventional detection techniques are limited in use for on‐site detection due to the necessity of specialized skill or equipment. Therefore, it is necessary to develop a new technique that can predetect pathogens in the field without special skills or equipment. Here, a DNAzyme strategy to control a plasmonic biosensor for rapid and simple visual detection of Salmonella choleraesuis is adopted. Multicomponent DNAzyme formed by target addition can cleave the linker effectively at 50 °C. Linker cleavage induces dispersion of two DNA‐immobilized gold nanoparticles and color change. Under optimized assay conditions, the target could be detected via visual discrimination sensitively and specifically. Moreover, the biosensor shows the possibility of practical use with contaminants and a 16S rRNA real target. As a result, the proposed plasmonic biosensor can visually detect S. choleraesuis without unstable enzymes, a specialized technique, or equipment. Therefore, these advantages could allow that this biosensor would be used for on‐site predetection to lower the risk of transmission of infectious diseases.     

Characterization and application of porous gold nanoparticles as 2‐photon luminescence imaging agents: 20‐fold brighter than gold nanorods

Two‐photon nonlinear microscopy with the aid of plasmonic contrast agents is an attractive bioimaging technique capable of generating high‐resolution images in 3 dimensions and facilitating targeted imaging with deep tissue penetration. In this work, physically synthesized gold nanoparticles containing multiple nanopores are used as 2‐photon contrast agents and are reported to emit a 20‐fold brighter 2‐photon luminescence as compared to typical contrast agents, that is, gold nanorods. A successful application of our porous gold nanoparticles is experimentally demonstrated by in vitro nonlinear optical imaging of adipocytes at subcellular level.      

High‐Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping

Significantly increased power conversion efficiency (PCE) of polymer solar cells (PSCs) is achieved by applying a plasmonic enhanced light trapping strategy to a low bandgap conjugated polymer, poly(indacenodithiophene‐ co‐phananthrene‐quinoxaline) (PIDT‐PhanQ) and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) based bulk‐heterojunction (BHJ) system. By doping both the rear and front charge‐selecting interfacial layers of the device with different sizes of Au NPs, the PCE of the devices is improved from 6.65% to 7.50% (13% enhancement). A detailed study of processing, characterization, microscopy, and device fabrication is conducted to understand the underlying mechanism for the enhanced device performance. The success of this work provides a simple and generally applicable approach to enhance light harnessing of low bandgap polymers in PSCs.     

High‐Performance Silver Cathode Surface Treated with Scandia‐Stabilized Zirconia Nanoparticles for Intermediate Temperature Solid Oxide Fuel Cells

This work introduces a novel silver composite cathode with a surface coating of scandia‐stabilized zirconia (ScSZ) nanoparticles for application in intermediate temperature solid oxide fuel cells (IT‐SOFCs). The ScSZ coating is expected to maximize the triple boundary area of the Ag electrode, ScSZ electrolyte, and oxygen gas, where the oxygen reduction reaction occurs. The coating also protects the porous Ag against thermal agglomeration during fuel cell operation. The ScSZ nanoparticles are prepared by sputtering scandium‐zirconium alloy followed by thermal oxidation on Ag mesh. The performance of the solid oxide fuel cells with a gadolinia‐doped ceria electrolyte support is evaluated. At temperatures <500 °C, our optimized Ag‐ScSZ cathode outperforms the bare Ag cathode and even the platinum cathode, which has been believed to be the best material for this purpose. The highest cell peak power with the Ag‐ScSZ cathode is close to 60 mW cm^?2 at 450 °C, while bare Ag and optimized Pt cathodes produce 38.3 and 49.4 mW cm^?2, respectively. Long‐term current measurement also confirms that the Ag‐ScSZ cathode is thermally stable, with less degradation than bare Ag or Pt.     

Incorporation of Indium Tin Oxide Nanoparticles in PEMFC Electrodes

Carbon materials suffer from corrosion at the cathode of polymer electrolyte membrane fuel cells (PEMFCs). In the presence of water, carbon support materials are oxidized to carbon dioxide even at low potentials. Hence, nowadays it is very fashionable to look for alternative support materials, like oxides or conductive polymers. To gain the maximum performance for a new material one should also consider an appropriate electrode structure. This study shows the results for the incorporation of nanosized alternative support materials into advanced electrode architectures. Commercially available indium tin oxide (ITO) nanoparticles (<50 nm) are used as support for Pt nanoparticles in combination with Nafion‐coated multi‐walled carbon nanotubes (MWCNTs) on the cathode side of a PEMFC. The MWCNTs promote a high electronic conductivity and help to form a porous network, which could accommodate the Pt/ITO nanoparticles. The microscopic investigations show a homogeneous electrode structure composed of Pt/ITO and MWCNT/Nafion multilayer. Single cell measurements show a maximum power density of 73 mW cm^?2 and a Pt utilization of 1468 mW mg_Pt^?1 for the cathode. The performance data and the Pt utilization are comparable to a standard Pt/carbon black electrode possessing the same Pt loading in the electrode. Beside this, it is shown for the first time that ITO serves as support material under real fuel cell conditions.