Procedure for Fabricating Biofunctional Nanofibers

Electrospinning is an effective processing method for preparing nanofibers decorated with functional groups. Nanofibers decorated with functional groups may be utilized to study material-biomarker interactions i.e. act as biosensors with potential as single molecule detectors. We have developed an effective approach for preparing functional polymers where the functionality has the capacity of specifically binding with a model protein. In our model system, the functional group is 2,4-dinitrophenyl (DNP) and the protein is anti-DNP IgE (Immunoglobulin E). The functional polymer, α,ω-bi[2,4-dinitrophenyl caproic][poly(ethylene oxide)-b-poly(2-methoxystyrene)-b-poly(ethylene oxide)] (CDNP-PEO-P2MS-PEO-CDNP), is prepared by anionic living polymerization. The difunctional initiator utilized in the polymerization was prepared by electron transfer reaction of α-methylstyrene and potassium (mirror) metal. The 2-methoxystyrene monomer was added first to the initiator, followed by the addition of the second monomer, ethylene oxide, and finally the living polymer was terminated by methanol. The α,ω-dihydroxyl polymer [HO-PEO-P2MS-PEO-OH] was reacted with N-2,4-DNP-∈-amino caproic acid, by DCC coupling, resulting in the formation of α,ω-bi[2,4-dinitrophenylcaproic][poly(ethyleneoxide)-b-poly(2-methoxystyrene)-b-poly(ethylene oxide)] (CDNP-PEO-P2MS-PEO-CDNP). The polymers were characterized by FT-IR, ¹H NMR and Gel Permeation Chromatography (GPC). The molecular weight distributions of the polymers were narrow (1.1-1.2) and polymers with molecular weights greater than 50,000 was used in this study. The polymers were yellow powders and soluble in tetrahydrofuran. A water soluble CDNP-PEO-P2MS-PEO-CDNP/ DMEG (dimethoxyethylene glycol) complex binds and achieves steady state binding with solution IgE within a few seconds. Higher molecular weight (water insoluble i.e. around 50,000) CDNP-PEO-P2MS-PEO-CDNP polymers, containing 1% single wall carbon nanotubes (SWCNT) were processed into electroactive nanofibers (100 nm to 500 nm in diameter) on silicon substrate. Fluorescence spectroscopy shows that anti-DNP IgE interacts with the nanofibers by binding with the DNP functional groups decorating the fibers. These observations suggest that appropriately functionalized nanofibers hold promise for developing biomarker detection device.     

Nanofibers made of globular proteins

Strong nanofibers composed entirely of a model globular protein, namely, bovine serum albumin (BSA), were produced by electrospinning directly from a BSA solution without the use of chemical cross-linkers. Control of the spinnability and the mechanical properties of the produced nanofibers was achieved by manipulating the protein conformation, protein aggregation, and intra/intermolecular disulfide bonds exchange. In this manner, a low-viscosity globular protein solution could be modified into a polymer-like spinnable solution and easily spun into fibers whose mechanical properties were as good as those of natural fibers made of fibrous protein. We demonstrate here that newly formed disulfide bonds (intra/intermolecular) have a dominant role in both the formation of the nanofibers and in providing them with superior mechanical properties. Our approach to engineer proteins into biocompatible fibrous structures may be used in a wide range of biomedical applications such as suturing, wound dressing, and wound closure.     

Nanomechanical Properties of Electrospun PLGA Nanofibers

This article has no abstract.     

Preparation and Characterization of Electrospun PLCL/Poloxamer Nanofibers and Dextran/Gelatin Hydrogels for Skin Tissue Engineering

In this study, two different biomaterials were fabricated and their potential use as a bilayer scaffold for skin tissue engineering applications was assessed. The upper layer biomaterial was a Poly(ε-caprolactone-co-lactide)/Poloxamer (PLCL/Poloxamer) nanofiber membrane fabricated using electrospinning technology. The PLCL/Poloxamer nanofibers (PLCL/Poloxamer, 9/1) exhibited strong mechanical properties (stress/strain values of 9.37±0.38 MPa/187.43±10.66%) and good biocompatibility to support adipose-derived stem cells proliferation. The lower layer biomaterial was a hydrogel composed of 10% dextran and 20% gelatin without the addition of a chemical crosslinking agent. The 5/5 dextran/gelatin hydrogel displayed high swelling property, good compressive strength, capacity to present more than 3 weeks and was able to support cells proliferation. A bilayer scaffold was fabricated using these two materials by underlaying the nanofibers and casting hydrogel to mimic the structure and biological function of native skin tissue. The upper layer membrane provided mechanical support in the scaffold and the lower layer hydrogel provided adequate space to allow cells to proliferate and generate extracellular matrix. The biocompatibility of bilayer scaffold was preliminarily investigated to assess the potential cytotoxicity. The results show that cell viability had not been affected when cocultured with bilayer scaffold. As a consequence, the bilayer scaffold composed of PLCL/Poloxamer nanofibers and dextran/gelatin hydrogels is biocompatible and possesses its potentially high application prospect in the field of skin tissue engineering.     

Nanofibers in a hyaluronan-based pericellular matrix

The extracellular matrix of the brain is a highly organized hyaluronan-based supramolecular assembly that is involved in neuronal pathfinding, cell migration, synaptogenesis and neuronal plasticity. Here, we analyze the structure of the hyaluronan-rich pericellular matrix of an oligodendroglial precursor cell line using helium ion beam scanning microscopy at a subnanometer resolution. We find that thin nanofibers are the ultimate building elements of this oligodendroglial pericellular matrix. These structures may participate in the regulation of oligodendroglial maturation and motility.     

Nanofibers and their applications in tissue engineering

Developing scaffolds that mimic the architecture of tissue at the nanoscale is one of the major challenges in the field of tissue engineering. The development of nanofibers has greatly enhanced the scope for fabricating scaffolds that can potentially meet this challenge. Currently, there are three techniques available for the synthesis of nanofibers: electrospinning, self-assembly, and phase separation. Of these techniques, electrospinning is the most widely studied technique and has also demonstrated the most promising results in terms of tissue engineering applications. The availability of a wide range of natural and synthetic biomaterials has broadened the scope for development of nanofibrous scaffolds, especially using the electrospinning technique. The three dimensional synthetic biodegradable scaffolds designed using nanofibers serve as an excellent framework for cell adhesion, proliferation, and differentiation. Therefore, nanofibers, irrespective of their method of synthesis, have been used as scaffolds for musculoskeletal tissue engineering (including bone, cartilage, ligament, and skeletal muscle), skin tissue engineering, vascular tissue engineering, neural tissue engineering, and as carriers for the controlled delivery of drugs, proteins, and DNA. This review summarizes the currently available techniques for nanofiber synthesis and discusses the use of nanofibers in tissue engineering and drug delivery applications.     

Boosting Sodium Storage in TiF3/Carbon Core/Sheath Nanofibers through an Efficient Mixed‐Conducting Network

Sodium‐ion batteries (SIBs) are considered to be promising energy storage devices for large‐scale grid storage application due to the vast earth‐abundance and low cost of sodium‐containing precursors. Designing and fabricating a highly efficient anode is one of the keys to improve the electrochemical performance of SIBs. Recently, fluoride‐based materials are found to show an exceptional anode function with high theoretical specific capacity, based on open‐framework structure enabling Na insertion and also exhibiting improved safety. However, fluoride‐based materials suffer from sluggish kinetics and poor capacity retention essentially due to low electric conductivity. Here, an efficient mixed‐conducting network offering fast pathways is proposed to address these issues. This network relies on titanium fluoride?carbon (TiF₃?C) core/sheath nanofibers that are prepared via electrospinning. Such highly interconnected electrodes exhibit an enhanced and faster sodium storage performance. Carbon sheath nanofibers are key to an efficient ion‐ and electron‐conducting network that enable Na⁺/e^? transfer to reach the nanosized TiF₃. In addition, in‐situ‐converted Ti and NaF particles embedded in the carbon matrix allow high reversible interfacial storage. As a result, the TiF₃?C core/sheath electrode exhibits a high capacity of 161 mAh g^?1 at a high current density of 1000 mA g^?1 over 2000 cycles.     

Multiwall Carbon Nanotubes and Nanofibers in Gallionella

This is a report of microbial formation of multiwall carbon nanotubes (MWCNT) and nanofibers at normal pressure and temperature. Our results demonstrate a single cell organism's ability to form complicated material of high industrial interest. The microorganism, Gallionella, is classified as autotrophic and dysoxic. It uses CO₂ for its carbon source and grows in environments with low concentrations of free oxygen. The organisms were taken from a deep bedrock tunnel where water leaking from cracks in the rock formed a precipitate of iron as a bacterial slime on the rock wall. Detailed investigations of the samples by transmission electron microscopy (TEM) revealed several types of MWCNT. The stalk single MWCNT was observed with a diameter of about 10 nm and with an inner diameter of 1.35 nm. The wall of the nanotube is built by graphite layers. The 10 to 20 sheets are used to form the tubes. The measured spacing between the lines is 0.34 nm, which is an average value of interlayer spacing, close to the graphitic distance (0.335 nm). HRTEM images reveal a two-dimensional lattice with a spacing of 0.24 nm, indicating the presence of graphene.     

Restrictions on the Production of Multi-Wall Carbon Nanotubes and Nanofibers by Gallionella sp.

The enzymatic oxidization of dissolved Fe(II) to Fe(III) by neutrophilic Fe-oxidizing bacteria plays a significant role in biological cycling of iron by inducing the precipitation of Fe(III) oxyhydroxide in aqueous environments. Among the diverse neutrophilic Fe-oxidizing bacteria, the genus Gallionella has received wide attention for its production of unique twisted extracellular stalks. Hallberg and Tai (2014 Hallberg R, Tai CW. 2014. Multi-wall carbon nanotubes and nanofibers in Gallionella. Geomicrobiol J 31(9):764–768.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]) recently reported the detection of multi-wall carbon nanotubes on the twisted-stalks, and they viewed those carbon nanotubes as being biologically produced by Gallionella. We scrutinized Gallionella-produced biofilms collected from natural environments by scanning electron microscopy and high-resolution transmission electron microscopy. Ferrihydrite and lepidocrocite were the only nano-scaled minerals observed on the stalk, while there were nanometer-sized sheet-like graphitic contaminants on the grid in the vicinity of the sample which showed the same morphology as Hallberg and Tai (2014 Hallberg R, Tai CW. 2014. Multi-wall carbon nanotubes and nanofibers in Gallionella. Geomicrobiol J 31(9):764–768.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]) observed. Moreover, similar materials on an empty grid and a grid loaded with randomly selected synthesized materials were also observed. Based on the current knowledge of carbon nanotube syntheses, none of the three known synthesizing methods including root-growth, rolling-up and bottom-up could be biochemically produced by any life because of the significant kinetic and energy obstacles. The carbon nanomaterials reported by Hallberg and Tai (2014 Hallberg R, Tai CW. 2014. Multi-wall carbon nanotubes and nanofibers in Gallionella. Geomicrobiol J 31(9):764–768.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]) were clearly contaminations from amorphous carbon film on the grids for holding samples for transmission electron microscopic observations.     

Spray-Dried Cellulose Nanofibers as Novel Tablet Excipient

The purpose of this study was to evaluate the potential of cellulose nanofibers (also referred as microfibrillated cellulose, nanocellulose, nanofibrillated, or nanofibrillar cellulose) as novel tabletting material. For this purpose, physical and mechanical properties of spray-dried cellulose nanofibers (CNF) were examined, and results were compared to those of two commercial grades of microcrystalline cellulose (MCC), Avicel PH101 and Avicel PH102, which are the most commonly and widely used direct compression excipients. Chemically, MCC and CNF are almost identical, but their physical characteristics, like mechanical properties and surface-to-volume ratio, differ remarkably. The novel material was characterized with respect to bulk and tapped as well as true density, moisture content, and flow properties. Tablets made of CNF powder and its mixtures with MCC with or without paracetamol as model compound were produced by direct compression and after wet granulation. The tensile strength of the tablets made in a series of applied pressures was determined, and yield pressure values were calculated from the measurements. With CNF, both wet granulation and direct compression were successful. During tablet compression, CNF particles were less prone to permanent deformation and had less pronounced ductile characteristics. Disintegration and dissolution studies showed slightly faster drug release from direct compression tablets with CNF, while wet granulated systems did not have any significant difference.     

Tuned Morphological Electrospun Hydroxyapatite Nanofibers via pH

The concept of biocompatible,osteoconductive and noninflammatory material mimicking the structure of natural bone has generated a considerable interest in recent decades.Hydroxyapatite (HA) is an important bionic material that is used for bone grafting in osseous defects and drug carriers.HA with various morphologies and surface properties have been widely investigated.In this paper,HA nanofibers are produced through a combination of electrospinning and sol-gel technique.The morphologies,composition and structure are investigated by Scanning Electron Microscopy (SEM),Thermogravimetic Analysis (TGA),Fourier Transform Infrared (FTIR),X-ray Diffraction (XRD) patterns,Transmission Electron Microscopy (TEM).The results show that HA nanofibers are even and well-crystallized,and pH is crucial for producing HA nanofibers.With the change ofpH from 4 to 9,nanofibers grow densely along (210) plane and become compact while surface area,pore volume and pore size decrease correspondingly.The synthesized HA nanofibers are nontoxic and safe.Zn can be also incorporated into HA nanofibers,which will endow them with more perfect function.     

Plasmon‐Enhanced Polymer Photovoltaic Device Performance Using Different Patterned Ag/PVP Electrospun Nanofibers

Significant enhancement of P3HT (poly(3‐hexylthiophene)):PC₆₁BM ([6,6]‐phenyl C61‐butyric acid methyl ester) photovoltaic devices using different patterns of electrospun Ag/PVP composite nanofibers, including nonwoven, aligned, and crossed patterns, is reported. The composite electrospun nanofibers are prepared using in situ reduction of silver (Ag) nanoparticles in Ag/poly(vinyl pyrrolidone) (PVP) via a two‐fluid coaxial electrospinning technique. The composition, crystalline orientation, and particle size of Ag are manipulated by controlling the core/shell solution concentration. The smallest diameter of the composite nanofibers leads to the highest orientation of the Ag nanoparticles and results in the largest conductivity due to geometric confinement. Such composite nanofibers exhibit the surface plasmon resonance (SPR) effect, which provides near field enhancement of electromagnetic field around active layer. Additionally, composite nanofibers with the crossed or nonwoven patterns further enhance high carrier mobility, compared to that of the aligned pattern. It leads to the 18.7% enhancement of the power conversion efficiency of photovoltaic cell compared to the parent device. The results indicate that the high conductivity and SPR effect of the Ag/PVP electrospun nanofibers can significantly improve the photocurrent and PCE, leading to promising organic solar cell applications.     

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.     

Electrospinning of Cross-Linked Magnetic Chitosan Nanofibers for Protein Release

A poly(vinylalcohol) (PVA) electrospun/magnetic/chitosan nanocomposite fibrous cross-linked network was fabricated using in situ cross-linking electrospinning technique and used for bovine serum albumin (BSA) loading and release applications. Sodium tripolyphosphate (TPP) and glutaraldehyde (GA) were used as cross-linkers which modified magnetic-Fe₃O₄ chitosan as Fe₃O_4/CS/TPP and Fe₃O_4/CS/GA, respectively. BSA was used as a model protein drugs which was encapsulated to form Fe₃O₄/CS/TPP/BSA and Fe₃O₄/CS/GA/BSA nanoparticles. The composites were electrospun with PVA to form nanofibers. Nanofibers were characterized by field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The characterization results suggest that Fe₃O₄ nanoparticles with average size of 45 nm were successfully bound on the surface of chitosan. The cross-linked nanofibers were found to contain uniformly dispersed Fe₃O₄ nanoparticles. The size and morphology of the nanofibers network was controlled by varying the cross-linker type. FTIR data show that these two polymers have intermolecular interactions. The sample with TPP cross-linker showed an enhancement of the controlled release properties of BSA during 30-h experimental investigation.

Graphical Abstract

Open in a separate windowᅟKEY WORDS: cross-linker, electrospun, magnetite, mano-composite, protein loading     

3D Synergistically Active Carbon Nanofibers for Improved Oxygen Evolution

Developing earth‐abundant and active electrocatalysts for the oxygen evolution reaction (OER) as replacements for conventional noble metal catalysts is of scientific and technological importance for achieving cost‐effective and efficient conversion and storage of renewable energy. However, most of the promising candidates thus far are exclusively metal‐based catalysts, which are disadvantaged by relatively restricted electron mobility, corrosion susceptibility, and detrimental environmental influences. Herein, hierarchically porous nitrogen (N) and phosphorus (P) codoped carbon nanofibers directly grown on conductive carbon paper are prepared through an electrochemically induced polymerization process in the presence of aniline monomer and phosphonic acid. The resultant material exhibits robust stability (little activity attenuation after 12 h continuous operation) and high activity with low overpotential (310 mV at 10 mA cm^?2) toward electrocatalytic oxygen production, with performance comparable to that of the precious iridium oxide (IrO₂) benchmark. Experimental measurements reveal that dual doping of N and P can result in an increased active surface area and abundant active sites in comparison with the single doped and pristine carbon counterparts, and density functional theory calculations indicate that N and P dopants can coactivate the adjacent C atoms, inducing synergistically enhanced activity toward OER.     

静电纺丝纳米纤维体外释放与蛋白活性的研究

目的:通过选择不同的模型蛋白,探讨准确的研究静电纺丝纳米纤维支架的体外释放和快速的测定蛋白活性的方法.方法:通过O/W乳液法静电纺丝制备纳米纤维,并用扫描电镜对纳米纤维表面进行了表征.以GM-CSF为模型蛋白,采用ELISA双抗体夹心法考察纤维的体外释放行为;以BSA为模型蛋白,用SEC-H-PLC比较纤维制备前后蛋白的聚集情况;以β-半乳糖苷酶为模型蛋白,用ONPG法比较纤维制备前后酶的催化活性.结果:纤维表面平滑,直径均一,呈现互相连通的三维网状结构.纤维在5天内释放90％以上;纤维中回收的BSA单体比例为66.53％;β-半乳糖苷酶在纤维中的催化活性保持原活性的3.37％.结论:通过选择不同的模型蛋白,能够准确的测定静电纺丝纤维的体外释放,快速的考察纤维中的蛋白活性,对于更好的研究蛋白药物纳米纤维支架具有重要的参考价值.