海岛棉产量和早熟性相关性状的QTLs定位

对海岛棉产量和早熟性状进行QTL初步定位,为分子标记辅助育种提供依据。利用5200多对SSR引物筛选海岛棉品种新海3号和Giza82间的多态性引物,获得107对。以多态性引物检测新海3号×Giza82的190个F2:3家系,获得120个多态性位点。利用JoinMap3.0分析软件构建了一个包含22个连锁群,74个标记,标记间平均距离12.06 cM,全长893 cM,覆盖海岛棉基因组20.12%的分子标记遗传连锁图谱。采用复合区间作图法检测到21个与海岛棉产量性状和早熟性状有关的QTL,其中早熟性状检测到12个QTL,分别位于1、3、5、6、11、17、22共7个连锁群上;产量性状检测到9个QTL,分别位于1、4、5、6、7、16、22共7个连锁群上。研究结果为海岛棉产量性状和早熟性状的分子设计育种提供了有用的信息。     

海岛棉(Gossypium barbadense L.)产量和早熟性状QTL定位

对海岛棉产量和早熟性状进行QTL初步定位,为分子标记辅助育种提供依据.利用5200多对SSR引物筛选海岛棉品种新海3号和Giza82间的多态性引物,获得107对.以多态性引物检测新海3号×Giza82的190个F2∶3家系,获得120个多态性位点.利用JoinMap3.0分析软件构建了一个包含22个连锁群,74个标记,标记间平均距离12.06cM,全长893cM,覆盖海岛棉基因组20.12％的分子标记遗传连锁图谱.采用复合区间作图法检测到21个与海岛棉产量性状和早熟性状有关的QTL,其中早熟性状检测到12个QTL,分别位于1、3、5、6、11、17、22共7个连锁群上;产量性状检测到9个QTL,分别位于1、4、5、6、7、16、22共7个连锁群上.研究结果为海岛棉产量性状和早熟性状的分子设计育种提供了有用的信息.     

测序水稻品种SSR遗传连锁图谱的构建及其农艺性状基因座分析

利用测序水稻品种"Nipponbare（粳）/广陆矮4号（籼）"杂交F2群体90个单株为作图群体,构建含148个SSR标记的水稻遗传连锁图谱,覆盖基因组全长1737.81cM,标记间平均距11.90cM。利用该图谱及Excel2000和Mapmaker/QTL1.1b软件对分蘖数、穗数、穗长、主穗长、株高、剑叶长等六个农艺性状间的相互关系和基因位点进行分析,结果在LOD>2.2和P<0.005的条件下共检测到28个QTLs,它们分布在水稻所有染色体上,单个QTL对性状的分子贡献率11.1%-42.9%,其中大于20%有10个,并对选用已测序材料为亲本构建图谱来探讨水稻农艺性状的分子基础及其育种意义进行了讨论。     

南瓜遗传连锁图谱的构建及粒宽性状的QTL定位

以印度南瓜纯系大粒材料‘0515-1’和小粒材料‘0460-1-1’为亲本,获得193个南瓜F2单株群体,应用AFLP和SSR分子标记技术进行多态性筛选,构建了含84个标记位点的遗传连锁图谱。结果表明,整个图谱包含12个连锁群,全长683.50cM,标记平均间距为8.13cM。采用复合区间定位分析,共检测到控制南瓜籽粒宽度的4个数量性状位点(QTL),分别位于3个连锁群上,各QTL的贡献率在2.87%～29.68%之间。     

四倍体栽培棉种产量和纤维品质性状的QTL定位

陆地棉和海岛棉是两个不同的四倍体栽培种 ,但在生产上各有其特点 ,陆地棉丰产性强 ,海岛棉纤维品质优良 ,利用其种间杂交群体定位产量和品质性状的QTL ,对于分子标记辅助的海岛棉优质纤维向陆地棉转移很有意义。以SSR和RAPD为分子标记 ,陆地棉与海岛棉杂种 (邯郸 2 0 8×Pima90 )F2 群体为作图群体 ,构建了一张含 12 6个标记的遗传图谱 ,包括 6 8个SSR标记和 5 8个RAPD标记 ,可分为 2 9个连锁群 ,标记间平均距离为 13 7cM ,总长1717 0cM ,覆盖棉花总基因组约 34 34% ;以遗传图 12 6个标记为基础 ,对F2 :3 家系符合正态分布的 10个农艺性状及纤维品质性状进行全基因组QTL扫描 ,结果发现 2 9个QTL分别与产量和品质性状有关。其中与衣指、籽指、皮棉产量、子棉产量、衣分等产量性状相关的QTL分别有 1、3、5、6和 1个 ,与纤维长度、整齐度、强度、伸长率和马克隆值等品质性状相关的QTL分别有 2、4、2、4和 1个。各QTL解释的变异量在 12 4 2 %～ 47 0 1%之间。其中比强度有关的 2个QTL能够解释的表型变异率分别为 34 15 %和 13 86 %。     

水稻子粒硒含量的遗传及QTL检测

富硒功能水稻具有富硒、优质、保健、防病、安全等特点,已成为当前研究的热点。子粒硒含量的QTL定位对研究富硒功能水稻的遗传育种具有重要的意义。以籼稻亲本奉新红米和明恢100杂交的145个株系的F2群体构建遗传连锁图谱,图谱拟合92个SSR标记位点,覆盖水稻基因组2187.5 cM,标记间平均遗传距离为23.7 cM,占水稻全基因组的49.2%。采用复合区间作图法,对水稻子粒硒含量进行QTL分析,在第5染色体上共检测到2个新的水稻子粒硒的QTL,对表型变异的贡献率分别为6.39%、8.01%。     

中国明对虾AFLP分子标记遗传连锁图谱的构建

以中国明对虾抗WSSV(白斑综合症病毒,WhiteSpotSyndromeVirus)选育群体第四代为母本,野生中国明对虾为父本,采用单对杂交方式产生F1代,F1代个体姊妹交产生F2代共42个个体为做图群体。62对AFLP选择性引物组合共产生529个分离位点,符合1∶1孟德尔分离类型位点共253个,3∶1孟德尔分离类型位点共276个。利用拟测交理论分别构建中国明对虾雌虾、雄虾的遗传连锁图谱,利用F2自交模型构建共同的AFLP分子标记连锁图谱。三张连锁图上分别有31、25和44个连锁群,图谱分辨率为分别为2.4cM、2.4cM和2.1cM。标记间隔距离分别为12.20cM、11.45cM和11.12cM图谱覆盖率分别达到50.21%、51.93%和48.08%。能够基本满足进行QTL(数量性状位点,QuantitativeTraitLocus)定位的需要。将该图谱和其他对虾类遗传连锁图谱进行了比较分析,探讨了利用相关分子标记将已有图谱进行整合的可能。     

桃''秦光2号''×''曙光''F1代SSR遗传连锁图谱的构建

以桃品种‘秦光2号’和‘曙光’及其90株F1代群体为试验材料,依据SSR标记构建桃的遗传连锁图谱。构建的图谱覆盖桃基因组640cM,包含16个连锁群、73个标记,标记间平均图距为11.7cM;桃的白/黄肉性状(Y/y)、离/粘核性状(F/f)被分别定位在第8连锁群和第9连锁群上,距其相邻的分子标记距离分别为4和5cM。所构建的遗传连锁图谱可用于进一步研究。     

玉米抗南方锈病基因的QTL定位

为发掘新的抗南方锈病基因资源,本研究以感病自交系黄早四为母本、抗病自交系W456为父本,构建F2群体并开展抗病基因定位研究。采用人工接种鉴定的方法对两个亲本、F1、F2群体及对照材料进行表型鉴定和遗传分析。利用均匀覆盖10条染色体的200个SSR标记,分析240个F2单株的基因型并构建含有200个SSR位点的遗传连锁图,连锁图总长度3331 cM,标记间平均距离16.6 cM。使用QTL IciMapping V4.1软件中的完备区间作图法对抗病QTL进行分析,共检测到6个控制南方锈病的QTL:qSCR3、qSCR7、qSCR8-1、qSCR8-2、qSCR9和qSCR10,邻近标记分别为umc2105和umc1729、umc1066和bnlg2271、umc1904和umc1984、umc1984和bnlg1651、umc1957和bnlg1401、umc2034和umc1291,分别位于3、7、8、9和10号染色体上,其中8号染色体上有两个位点,标记区间长度在5～19 cM之间。单个QTL的表型贡献率在2.61%～24.19%之间,可以解释表型总变异的62.3%,其中3个QTL贡献率大于10%,位于10号染色体上的qSCR10贡献率最大,可解释表型变异的24.19%。通过对目标区间标记加密,将该位点的定位区间进一步缩小到2.51 cM内,与两侧标记的距离分别是2.15 cM和0.36 cM。初步定位得到10号染色体上存在抗南方锈病的主效QTL,可为抗病品种的培育提供参考。     

大豆遗传图谱的构建和若干农艺性状的QTL定位分析

大豆许多重要农艺性状都是由微效多基因控制的数量性状,对这些数量性状进行QTL定位是大豆数量性状遗传研究领域的一个重要内容.本研究利用栽培大豆科新3号为父本、中黄20为母本杂交得到含192个单株的F2分离群体,构建了含122 个SSR标记、覆盖1719.6cM、由33个连锁群组成的连锁遗传图谱.利用复合区间作图法,对该群体的株高、主茎节数、单株粒重和蛋白质含量等农艺性状的调查数据进行QTL分析,共找到两个株高QTL,贡献率分别为9.15%和6.08%;两个主茎节数QTL,贡献率分别为10. 1%和8.6%;一个蛋白质含量QTL,贡献率为9.8%;一个单株粒重QTL,贡献率为11.4% .通过遗传作图共找到与所定位的4个农艺性状QTL连锁的6个SSR标记,这些标记可以应用于大豆种质资源的分子标记辅助选择,从而为大豆分子标记辅助育种提供理论依据.     

Pathogenic aspects of Pantoea agglomerans in relation to cotton boll age and Dysdercus cingulatus (Fabricius) transmitting seed and boll rot in cotton germplasm

Bacterial seed and boll rot is a newly emerging cotton disease in Pakistan. Twenty-one cotton varieties were screened to find resistance source against the disease. None of these was found to be resistant. Five cotton varieties (CIM-595, MK2, BT-986, BT-986 & SG-1) having 700–1400 Area under disease progress curve (AUDPC) units were found to be moderately resistant to the disease. SLH-317, FH-942, BT-222, BT-666, MNH-457 ranging from 1401–1700 AUDPC units were moderately susceptible while MNH-456, SLH-336, 9811, FH-942, MNH-886 susceptible to boll rot. Seven varieties (FH-114, FH-113, BT-7, BT-212, SLH-BT-4, BT-212 and FH-941) were highly susceptible to bacterial seed and boll rot indicated by 2001–2300 AUDPC units. Biochemical tests identified bacterial isolates as Pantoea agglomerans. Different inoculation techniques were assessed for bacterial pathogenicity and symptoms of boll rot were only observed in needle punctured bolls. One, two and three weeks old bolls were mechanically inoculated by injecting bacterial suspension to evaluate the boll’s age impact on disease severity. Maximum severity was observed in two weeks old bolls. Red cotton bugs (Dysdercus cingulatus) were fed on artificially inoculated diseased bolls and then transferred on healthy bolls. Diseased symptoms were noticed on healthy cotton bolls. Bacterial colonies were recovered and red cotton bug was confirmed as the disease-transmitting vector.     

Mapping quantitative trait loci for lint yield and fiber quality across environments in a Gossypium hirsutum × Gossypium barbadense backcross inbred line population

Identification of stable quantitative trait loci (QTLs) across different environments and mapping populations is a prerequisite for marker-assisted selection (MAS) for cotton yield and fiber quality. To construct a genetic linkage map and to identify QTLs for fiber quality and yield traits, a backcross inbred line (BIL) population of 146 lines was developed from a cross between Upland cotton (Gossypium hirsutum) and Egyptian cotton (Gossypium barbadense) through two generations of backcrossing using Upland cotton as the recurrent parent followed by four generations of self pollination. The BIL population together with its two parents was tested in five environments representing three major cotton production regions in China. The genetic map spanned a total genetic distance of 2,895 cM and contained 392 polymorphic SSR loci with an average genetic distance of 7.4 cM per marker. A total of 67 QTLs including 28 for fiber quality and 39 for yield and its components were detected on 23 chromosomes, each of which explained 6.65–25.27 % of the phenotypic variation. Twenty-nine QTLs were located on the At subgenome originated from a cultivated diploid cotton, while 38 were on the Dt subgenome from an ancestor that does not produce spinnable fibers. Of the eight common QTLs (12 %) detected in more than two environments, two were for fiber quality traits including one for fiber strength and one for uniformity, and six for yield and its components including three for lint yield, one for seedcotton yield, one for lint percentage and one for boll weight. QTL clusters for the same traits or different traits were also identified. This research represents one of the first reports using a permanent advanced backcross inbred population of an interspecific hybrid population to identify QTLs for fiber quality and yield traits in cotton across diverse environments. It provides useful information for transferring desirable genes from G. barbadense to G. hirsutum using MAS.     

大铃棉中棉所48主要经济性状的QTL定位分析

利用4961对SSR引物对中棉所48的2个亲本进行多态性筛选,结果筛选到71对条带清晰、稳定性好的多态性引物,利用这些引物对261个F2群体进行扩增构建连锁图,获得了包含有49个标记位点的14个连锁群,共覆盖498.7cM,约占棉花总基因组10.0％的遗传图谱.采用WinQTL Cartographer 2.5的复合区间作图法(CIM),对F2群体的铃重、衣分及纤维品质进行分析,共检测到l1个稳定的QTLs,其中铃重2个、表分4个、纤维整齐度2个、纤维细度2个、纤维伸长率1个.这些稳定表达的QTLs能解释较大的表型变异,可用于纤维品质及产量性状的标记辅助选择,也可为大铃、优质棉的分子标记辅助选择,改良、提高大铃基因的选择效率,提供理论依据.     

Identification of Associated SSR Markers for Yield Component and Fiber Quality Traits Based on Frame Map and Upland Cotton Collections

Detecting QTLs (quantitative trait loci) that enhance cotton yield and fiber quality traits and accelerate breeding has been the focus of many cotton breeders. In the present study, 359 SSR (simple sequence repeat) markers were used for the association mapping of 241 Upland cotton collections. A total of 333 markers, representing 733 polymorphic loci, were detected. The average linkage disequilibrium (LD) decay distances were 8.58 cM (r² > 0.1) and 5.76 cM (r² > 0.2). 241 collections were arranged into two subgroups using STRUCTURE software. Mixed linear modeling (MLM) methods (with population structure (Q) and relative kinship matrix (K)) were applied to analyze four phenotypic datasets obtained from four environments (two different locations and two years). Forty-six markers associated with the number of bolls per plant (NB), boll weight (BW), lint percentage (LP), fiber length (FL), fiber strength (FS) and fiber micornaire value (FM) were repeatedly detected in at least two environments. Of 46 associated markers, 32 were identified as new association markers, and 14 had been previously reported in the literature. Nine association markers were near QTLs (at a distance of less than 1–2 LD decay on the reference map) that had been previously described. These results provide new useful markers for marker-assisted selection in breeding programs and new insights for understanding the genetic basis of Upland cotton yields and fiber quality traits at the whole-genome level.     

A genetic linkage map of Pacific white shrimp (<Emphasis Type="Italic">Litopenaeus vannamei</Emphasis>): sex-linked microsatellite markers and high recombination rates

Pacific white shrimp (Litopenaeus vannamei) is the leading species farmed in the Western Hemisphere and an economically important aquaculture species in China. In this project, a genetic linkage map was constructed using amplified fragment length polymorphism (AFLP) and microsatellite markers. One hundred and eight select AFLP primer combinations and 30 polymorphic microsatellite markers produced 2071 markers that were polymorphic in either of the parents and segregated in the progeny. Of these segregating markers, 319 were mapped to 45 linkage groups of the female framework map, covering a total of 4134.4 cM; and 267 markers were assigned to 45 linkage groups of the male map, covering a total of 3220.9 cM. High recombination rates were found in both parental maps. A sex-linked microsatellite marker was mapped on the female map with 6.6 cM to sex and a LOD of 17.8, two other microsatellite markers were also linked with both 8.6 cM to sex and LOD score of 14.3 and 16.4. The genetic maps presented here will serve as a basis for the construction of a high-resolution genetic map, quantitative trait loci (QTLs) detection, marker-assisted selection (MAS) and comparative genome mapping.     

Reproductive potential of field-collected overwintering boll weevils (Coleoptera: Curculionidae) fed on pollen in the laboratory

Abstract  The reproductive potential of overwintering boll weevil, Anthonomus grandis grandis (Boheman), females collected from pheromone traps in September, November and January, fed for 1, 3, and 5 weeks on plant pollens, and then provided cotton squares, was determined in the laboratory at 27 ± 1°C, 65% RH, and a photoperiod 13 : 11 (L : D) h. Duration of pollen feeding by overwintering boll weevils did not significantly influence egg and feeding punctures, or puncture ratios (egg to total punctures) for any of the three months of parent weevil collections when provided cotton squares on a daily basis. However, punctures and puncture ratios are significantly different when comparing mean data between months of boll weevil collections. When boll weevils were provided with cotton squares daily, the pre-ovipositional periods of female parents captured in September, November and January were 5, 9 and 14 days, respectively. The rate of eggs by females was significantly lower during November and January than September. Female parents collected in September produced a significantly higher percentage of eggs yielding adult progeny than those collected in November and January. Life table parameters indicated that net reproductive rate ( R _o) of boll weevil females collected in September was 1.2-fold higher than those collected in November and 10.7-fold higher than those collected in January. Except for testes size, no differences in male reproductive parameters were observed during the cotton-free period compared with males captured during mid-cotton (June). The number of oocytes in the ovarioles and the number of oocytes containing yolk were significantly lower during September, November and January compared with June. The reproductive potential of overwintering boll weevil females collected in different months is an important consideration in determining the success of any control strategy.     

SSR-based genetic linkage map construction in pistachio using an interspecific F<Subscript>1</Subscript> population and QTL analysis for leaf and shoot traits

Pistachio is one of the most commercially important nut trees in the world. To characterize the genetic controls of horticultural traits and facilitate marker-assisted breeding in pistachio, we constructed an SSR-based linkage map using an interspecific F₁ population derived from a cross between the cultivar “Siirt” (Pistacia vera L.) and the monoecious Pa-18 genotype of Pistacia atlantica Desf. This population was also used for the first QTL analysis in pistachio on leaf and shoot characters. In total, 1312 SSR primers were screened, and 388 loci were successfully integrated into parental linkage maps. The Siirt maternal map contained 306 markers, while the “Pa-18” paternal map included 285 markers along the 15 linkage groups. The Siirt map spanned 1410.4 cM, with an average marker distance of 4.6 cM; the Pa-18 map covered 1362.5 cM with an average marker distance of 4.8 cM. Phenotypic data were collected during the growing seasons of 2015 and 2016 for four traits: leaf length (LL), leaf width (LW), leaf length/leaf width ratio (LWR), number of leaflet pairs (NLL), and young shoot color (YSC). A total of 17 QTLs were identified in the parental maps. Four QTLs for LL and LW were located on LG2 and LG4, while four QTLs for LWR ratio on LG13 and LG14, two QTLs for NLL and two QTLs for YSC were on LG7 and LG9, respectively, with similar positions in both parental maps. The SSR markers, linkage maps, and QTLs reported here will provide a valuable resource for future molecular and genetic studies in pistachio.     

Molecular mapping of QTLs for fiber qualities in three diverse lines in Upland cotton using SSR markers

The improvement of cotton fiber quality is extremely important because of changes in spinning technology. The identification of the stable QTLs affecting fiber traits across different generations will be greatly helpful to be used effectively in molecular marker-assisted selection to improve fiber quality of cotton cultivars in the future. Using three elite fiber lines of Upland cotton (Gossypium hirsutum L.) as parents, three linkage maps were constructed to tag QTLs for fiber qualities using SSR markers. There were 39 QTLs, 17 significant QTLs, LOD 3.0 and 22 suggestive QTLs, 3.0 > LOD 2.0, detected by composite interval mapping for fiber traits, in which 11 QTLs were for fiber length, 10 for fiber strength, 9 for micronaire and 9 for fiber elongation. Out of 17 significant QTLs, 5 QTLs with high logarithm of odds (LOD) score value and stable effect could be found in both F₂ and F_2:3 segregating populations, showing a great potential for molecular-assisted selection in improving fiber quality. At least three common QTLs could be identified in two populations. These common QTLs detected in different populations suggested that there existed elite fiber genes and possibly of the same origin. In addition, we found three pairs of putative homoeologous QTLs, qFL-7-1c and qFL-16-1c, qFS-D03-1a, qFS-A02-1b and qFS-A02-1c, and qFE–D03-1a and qFE-A02-1c. Our results provided a better understanding of the genetic factors of fiber traits in AD tetraploid cottons.     

Reducing boll weevil populations by clipping terminal buds and removing abscised fruiting bodies

Cotton pests damaging fruiting bodies (squares and young bolls) are difficult to control and their damage results in direct yield loss. Small growers, with low technological inputs, represent a large portion of cotton growers worldwide comprising more than 76 countries; they rely mainly on cultural practices to counteract pest attack in their crops. Boll weevil, Anthonomus grandis Boheman (Coleoptera: Curculionidae), oviposition involves puncturing cotton squares and young bolls, causing abscission. We examined the impact on boll weevil population of collecting abscised cotton fruiting bodies and clipping plant terminals at 50% boll maturation in the field during two cotton‐growing seasons and under field cage conditions. Greatest numbers of damaged squares occurred ca. 117 days after planting and clipped plants resulted in reduction of abscised structures and adult boll weevils compared with non‐clipped plants, irrespective of cotton variety. Damaged young bolls were found ca. 128 days after planting in 2009 and 2011, but clipping had no effect. Numbers of boll weevils found in plants of the varieties BRS 201 and BRS Rubi (both in 2009) and BRS Rubi (in 2011) were, respectively, 13‐, 17‐, and 20‐fold greater when clipping plus collecting abscised fruiting bodies were not practiced. Furthermore, the average percentage of the boll weevil parasitoid Bracon vulgaris Ashmead (Hymenoptera: Braconidae) emerging from abscised and collected structures was similar between clipped and non‐clipped plant terminals in both seasons. Clipping plant terminals did not result in yield reduction and reduced adult boll weevil production. Collecting abscised reproductive structures, clipping plant terminals, and using both practices together reduced boll weevil populations by as much as 63, 57, and 79%, respectively, in cage trials. Thus, these practices cause significant impact on boll weevil populations and are feasible of adoption, especially for smallholder cotton growers.     

施氮量和种植密度对东北特早熟棉区棉铃生物量和氮素累积的影响

以辽棉19号和美棉33B为材料,研究了不同施氮量(0、240、480 kg ·hm-2)和不同种植密度(75000、97500、120000 plants·hm-2)对东北特早熟棉区棉花棉铃生物量和氮素累积特征的影响.结果表明： 棉花单铃、棉籽和纤维的生物量及其氮素累积随棉花生育进程的动态变化均符合“S”型曲线,种植密度和施氮量可以显著影响棉铃各部分生物量和氮素累积的动态特征,以及棉花产量与品质;在施氮量240 kg·hm-2和种植密度97500 plants·hm-2处理下,单铃、棉籽和纤维的生物量均达到最大,生物量和氮素累积的快速累积起始时间和终止时间较早但持续时间较短,生物量快速累积速率最大,生物量和氮素在铃壳中的分配系数最低,在棉籽和纤维中分配系数最高.