Improved 1,3-propanediol production with hemicellulosic hydrolysates (corn straw) as cosubstrate: Impact of degradation products on Klebsiella pneumoniae growth and 1,3-propanediol fermentation

To improve 1,3-propanediol (1,3-PD) production by an economic and efficient approach, hemicellulosic hydrolysates (HH) used as cosubstrate resulted in more biomass and higher reducing power for 1,3-PD production. The effects of primary degradation products such as individual sugars (xylose, glucose, mannose, arabinose and galactose) and major inhibitors (furfural, acetate and formate) on the Klebsiella pneumoiae growth and 1,3-PD production were investigated in this study. Xylose and mannose could efficiently promote the 1,3-PD production and cell growth. Furfural (0.28 g/l) and sodium acetate (1.46 g/l) in low concentration were not inhibitory to Klebsiella pneumoniae, rather they have stimulatory effect on the growth and 1,3-PD biosynthesis, especially the acetate. In fed-batch fermentation with HH as cosubstrate, the final 1,3-PD production, conversion from glycerol and productivity were 71.58 g/l, 0.65 mol/mol and 1.93 g/l/h, respectively, which were 17.8%, 25.0% and 17.7% higher than that from glycerol alone.     

Study of two-stage processes for the microbial production of 1,3-propanediol from glucose

The microbial production of 1,3-propanediol (1,3-PD) from glucose was studied in a two-stage fermentation process on a laboratory scale. In the first stage, glucose was converted to glycerol either by the osmotolerant yeast Pichia farinosa or by a recombinant Escherichia coli strain. In the second stage, glycerol in the broth from the first stage was converted to 1,3-PD by Klebsiella pneumoniae. The culture broth from P. farinosa was shown to contain toxic metabolites that strongly impair the growth of K. pneumoniae and the formation of 1,3-PD. Recombinant E. coli is more suitable than P. farinosa for producing glycerol in the first stage. The fermentation pattern from glycerol can be significantly altered by the presence of acetate, leading to a significant reduction of PD yield in the second stage. However, in the recombinant E. coli culture acetate formation can be prevented by fed-batch cultivation under limiting glucose supply, resulting in an effective production of 1,3-PD in the second stage with a productivity of 2.0 g l(-1) h(-1) and a high yield (0.53 g/g) close to that of glycerol fermentation in a synthetic medium. The overall 1,3-PD yield from glucose in the two stage-process with E. coli and K. pneumoniae reached 0.17 g/g.     

Microbial fed-batch production of 1,3-propanediol by Klebsiella pneumoniae under micro-aerobic conditions

The microbial production of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae under micro-aerobic conditions was investigated in this study. The experimental results of batch fermentation showed that the final concentration and yield of 1,3-PD on glycerol under micro-aerobic conditions approached values achieved under anaerobic conditions. However, less ethanol was produced under microaerobic than anaerobic conditions at the end of fermentation. The batch micro-aerobic fermentation time was markedly shorter than that of anaerobic fermentation. This led to an increment of productivity of 1,3-PD. For instance, the concentration, molar yield, and productivity of 1,3-PD of batch micro-aerobic fermentation by K. pneumoniae DSM 2026 were 17.65 g/l, 56.13%, and 2.94 g l^–1 h^–1, respectively, with a fermentation time of 6 h and an initial glycerol concentration of 40 g/l. Compared with DSM 2026, the microbial growth of K. pneumoniae AS 1.1736 was slow and the concentration of 1,3-PD was low under the same conditions. Furthermore, the microbial growth in fed-batch fermentation by K. pneumoniae DSM 2026 was faster under micro-aerobic than anaerobic conditions. The concentration, molar yield, and productivity of 1,3-PD in fed-batch fermentation under micro-aerobic conditions were 59.50 g/l, 51.75%, and 1.57 g l^–1 h^–1, respectively. The volumetric productivity of 1,3-PD under microaerobic conditions was almost twice that of anaerobic fed-batch fermentation, at 1.57 and 0.80 g l^–1 h^–1, respectively.     

1,3-Propanediol production and tolerance of a halophilic fermentative bacterium, Halanaerobium saccharolyticum subsp. saccharolyticum

1,3-Propanediol (1,3-PD) is widely used in polymer industry in production of polyethers, polyesters and polyurethanes. In this article, a study on 1,3-PD production and tolerance of Halanaerobium saccharolyticum subsp. saccharolyticum is presented. 1,3-PD production was optimized for temperature, vitamin B(12) and acetate concentration. The highest 1,3-PD concentrations and yields (0.6 mol/mol glycerol) were obtained at vitamin B?? concentration 64 μg/l and an inverse correlation between 1,3-PD and hydrogen production was observed with varying vitamin B?? concentrations. In the studied temperature range and initial acetate concentrations up to 10 g/l, no significant variations were observed in 1,3-PD production. High initial acetate (29-58 g/l) was observed to cause slight decrease in 1,3-PD concentrations produced but no effects on 1,3-PD yields (mol/mol glycerol). Initial 1,3-PD concentrations inhibited the growth of H. saccharolyticum subsp. saccharolyticum. When initial 1,3-PD concentration was raised from 1g/l to 57 g/l, a decrease of 12% to 75%, respectively, in the highest optical density was observed.     

Construction and Characterization of a 1,3-Propanediol Operon

The genes for the production of 1,3-propanediol (1,3-PD) in Klebsiella pneumoniae, dhaB, which encodes glycerol dehydratase, and dhaT, which encodes 1,3-PD oxidoreductase, are naturally under the control of two different promoters and are transcribed in different directions. These genes were reconfigured into an operon containing dhaB followed by dhaT under the control of a single promoter. The operon contains unique restriction sites to facilitate replacement of the promoter and other modifications. In a fed-batch cofermentation of glycerol and glucose, Escherichia coli containing the operon consumed 9.3 g of glycerol per liter and produced 6.3 g of 1,3-PD per liter. The fermentation had two distinct phases. In the first phase, significant cell growth occurred and the products were mainly 1,3-PD and acetate. In the second phase, very little growth occurred and the main products were 1,3-PD and pyruvate. The first enzyme in the 1,3-PD pathway, glycerol dehydratase, requires coenzyme B₁₂, which must be provided in E. coli fermentations. However, the amount of coenzyme B₁₂ needed was quite small, with 10 nM sufficient for good 1,3-PD production in batch cofermentations. 1,3-PD is a useful intermediate in the production of polyesters. The 1,3-PD operon was designed so that it can be readily modified for expression in other prokaryotic hosts; therefore, it is useful for metabolic engineering of 1,3-PD pathways from glycerol and other substrates such as glucose.     

Production of 1,3-propanediol from Glycerol by Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Using Incompatible Plasmids System

1,3-Propanediol (1,3-PD) has numerous applications in polymers, cosmetics, foods, lubricants, and medicines as a bifunctional organic compound. The genes for the production of 1,3-PD in Klebsiella pneumoniae, dhaB, which encodes glycerol dehydratase, and dhaT, which encodes 1,3-PD oxidoreductase, and gdrAB, which encodes glycerol dehydratase reactivating factor, are naturally under the control of different promoters and are transcribed in different directions. These genes were coexpressed in E. coli using two incompatible plasmids (pET28a and pET22b) in the presence of selective pressure. The recombinant E. coli coexpressed the glycerol dehydratase, 1,3-propanediol oxidoreductase and reactivating factor for the glycerol dehydratase at high levels. In a fed-batch fermentation of glycerol and glucose, the recombinant E. coli containing these two incompatible plasmids consumed 14.3 g/l glycerol and produced 8.6 g/l 1,3-propanediol. In the substitution case of yqhD (encoding alcohol dehydrogenase from E. coli) for dhaT, the final 1,3-propanediol concentration of the recombinant E. coli could reach 13.2 g/l.     

利用克雷伯肺炎杆菌限制性底物发酵生产1，3-丙二醇

研究了克雷伯肺炎杆菌（Klebsiella pneumoniae）批式流加发酵生产1,3-丙二醇的发酵工艺,根据1,3-丙二醇的生产和菌体生长相关的特点,采用营养基质限制性流加的发酵工艺,通过控制氮源氯化铵以保持细胞稳定生长。结果表明：过低的氮源浓度,细胞生长受到限制,影响产物1,3-PD的合成;过高的氮源浓度,细胞比生长速率增加,但1,3-PD关于消耗甘油的得率降低,用于生长和维持代谢所消耗的甘油量增加。以0.41 g/(L·h)的氮源流加速率,残余氯化铵浓度在0.1 g/L时,转化率和生产强度最高。发酵25 h～28 h后,1,3-丙二醇最终浓度达到52.03 g/L,生产强度为2.04 g/(L·h),相对于甘油的摩尔转化率为0.66,分别比氮源限制前提高了28.0 ％、35.1 ％及29.4 ％。通过限制性流加氯化铵,控制细胞的比生长速率,使底物甘油有效转变为发酵的目标产物1,3-PD,有效实现产物1,3-PD的高生产强度以及对甘油的高转化率。     

Isolation of microorganisms able to produce 1,3-propanediol and optimization of medium constituents for Klebsiella pneumoniae AJ4

Microbial fermentation under anaerobic and microaerobic conditions has been used for the production of 1,3-propanediol (1,3-PD), a monomer used to produce polymers such as polytrimethylene terephthalate. In this study, we screened microorganisms using the high throughput screening method and isolated the Klebsiella pneumoniae AJ4 strain, which is able to produce 1,3-PD under aerobic conditions. To obtain the maximum 1,3-PD concentration from glycerol, the response surface methodology based on a central composite design was chosen to show the statistical significance of the effects of glycerol, peptone, and (NH₄)₂SO₄ on 1,3-PD production by K. pneumoniae AJ4. The optimal culture medium factors for achieving maximum concentrations of 1,3-PD included glycerol, 108.5 g/L; peptone, 2.72 g/L; and (NH₄)₂SO_4, 4.38 g/L. Under this optimum condition, the maximum concentration of 1,3-PD, 54.76 g/L, was predicted. A concentration of about 52.59 g/L 1,3-PD was obtained using the optimized medium during 26-h batch fermentation, a finding that agreed well with the predicted value.     

Enhanced 1,3-propanediol production in recombinant <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> carrying the gene <Emphasis Type="Italic">yqh</Emphasis>D encoding 1,3-propanediol oxidoreductase isoenzyme

The yqhD gene from Escherichia coli encoding 1,3-propanediol oxidoreductase isoenzyme (PDORI) and the tetracycline resistant gene (tetR) from plasmid pHY300PLK were amplified by PCR. They were inserted into vector pUC18, yielding the recombinant expression vector pUC18-yqhD-tetR. The recombinant vector was then cloned into Klebsiella pneumoniae ME-308. The overexpression of PDORI in K. pneumoniae surprisingly led to higher 1,3-propanediol production. The final 1,3-propanediol concentration of recombinant K. pneumoniae reached 67.6 g/l, which was 125.33% of that of the original strain. The maximum activity of recombinant PDORI converting 3-HPA to 1,3-PD reached 110 IU/mg after induction by IPTG at 31°C during the fermentation, while it was only 11 IU/mg under the same conditions for the wild type strain. The K _m values of the purified PDORI for 1,3-propanediol and NADP were 12.1 mM and 0.15 mM, respectively. Compared with the original strains, the concentration of the toxic intermediate 3-hydroxypropionaldehyde during the fermentation was also reduced by 22.4%. Both the increased production of 1,3-propanediol and the reduction of toxic intermediate confirmed the significant role of 1,3-propanediol oxidoreductase isoenzyme from E. coli in converting 3-hydroxypropionaldehyde to 1,3-propanediol for 1,3-PD production.     

1,3-Propanediol oxidoreductase production with Klebsiella pneumoniae DSM2026

We report a Klebsiella pneumoniae DSM2026 fermentation procedure for the efficient production of a key enzyme of 1,3-propanediol formation: 1,3-propanediol oxidoreductase (E.C. 1.1.1.202). The fermentation process is composed of an aerobic batch phase on glucose and glycerol and an anaerobic phase on glycerol. The role of the aerobic phase is to produce sufficiently high cell mass (12.9–14.6 g/l dry weight) and to activate the aerobic branch of the Klebsiella glycerol pathway, whereas in the anaerobic phase there is a rapid initiation of 1,3-propanediol oxidoreductase formation. A fast change from an aerobic to an anaerobic environment led to a redox imbalance, which resulted in the abrupt activation of the anaerobic branch of glycerol utilization, with the occurrence of a high 1,3-propanediol-oxidoreductase activity. A mathematical model with substrate inhibition showed that the adequate glycerol concentration for enzyme production was 14–16 g/l. The combination of the optimal substrate concentration together with the subsequent use of glucose and glycerol resulted in 90.6 ± 11.6 U enzyme activity referred to 1 l of fermentation broth and 10.3 ± 0.9 U/(1 h) productivity.     

Fermentation of 1,3-propanediol by a lactate deficient mutant of Klebsiella oxytoca under microaerobic conditions

Klebsiella oxytoca M5al is an excellent 1,3-propanediol (1,3-PD) producer, but too much lactic acid yielded greatly lessened the fermentation efficiency for 1,3-PD. To counteract the disadvantage, four lactate deficient mutants were obtained by knocking out the ldhA gene of lactate dehydrogenase (LDH) of K. oxytoca M5al. The LDH activities of the four mutants were from 3.85 to 6.92% of the parental strain. The fed-batch fermentation of 1,3-PD by mutant LDH3, whose LDH activity is the lowest, was studied. The results showed that higher 1,3-PD concentration, productivity, and molar conversion rate from glycerol to 1,3-PD can be gained than those of the wild type strain and no lactic acid is produced under both anaerobic and microaerobic conditions. Sucrose fed during the fermentation increased the conversion and sucrose added at the beginning increased the productivity. In fed-batch fermentation with sucrose as cosubstrate under microaerobic conditions, the 1,3-PD concentration, conversion, and productivity were improved significantly to 83.56 g l⁻¹, 0.62 mol mol⁻¹, and 1.61 g l⁻¹ h⁻¹, respectively. Furthermore, 60.11 g l⁻¹ 2,3-butanediol was also formed as major byproduct in the broth.     

Improved 1,3-propanediol production by engineering the 2,3-butanediol and formic acid pathways in integrative recombinant Klebsiella pneumoniae

In the biotechnological process, insufficient cofactor NADH and multiple by-products restrain the final titer of 1,3-propanediol (1,3-PD). In this study, 1,3-PD production was improved by engineering the 2,3-butanediol (2,3-BD) and formic acid pathways in integrative recombinant Klebsiella pneumoniae. The formation of 2,3-BD is catalysed by acetoin reductase (AR). An inactivation mutation of the AR in K. pneumoniae CF was generated by insertion of a formate dehydrogenase gene. Inactivation of AR and expression of formate dehydrogenase reduced 2,3-BD formation and improved 1,3-PD production. Fermentation results revealed that intracellular metabolic flux was redistributed pronouncedly. The yield of 1,3-PD reached 0.74 mol/mol glycerol in flask fermentation, which is higher than the theoretical yield. In 5 L fed-batch fermentation, the final titer and 1,3-PD yield of the K. pneumoniae CF strain reached 72.2 g/L and 0.569 mol/mol, respectively, which were 15.9% and 21.7% higher than those of the wild-type strain. The titers of 2,3-BD and formic acid decreased by 52.2% and 73.4%, respectively. By decreasing the concentration of all nonvolatile by-products and by increasing the availability of NADH, this study demonstrates an important strategy in the metabolic engineering of 1,3-PD production by integrative recombinant hosts.     

Fermentation strategies for 1,3-propanediol production from glycerol using a genetically engineered Klebsiella pneumoniae strain to eliminate by-product formation

We generated a genetically engineered Klebsiella pneumoniae strain (AK-VOT) to eliminate by-product formation during production of 1,3-propanediol (1,3-PD) from glycerol. In the present study, the glycerol-metabolizing properties of the recombinant strain were examined during fermentation in a 5 L bioreactor. As expected, by-product formation was completely absent (except for acetate) when the AK-VOT strain fermented glycerol. However, 1,3-PD productivity was severely reduced owing to a delay in cell growth attributable to a low rate of glycerol consumption. This problem was solved by establishing a two-stage process separating cell growth from 1,3-PD production. In addition, nutrient co-supplementation, especially with starch, significantly increased 1,3-PD production from glycerol during fed-batch fermentation by AK-VOT in the absence of by-product formation.     

Statistical optimization of culture conditions for 1,3-propanediol by Klebsiella pneumoniae AC 15 via central composite design

A central composite design was used to study the effect of glycerol, rate of stirring, air aeration and pH on the synthesis of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae AC 15. Among the four variables, glycerol and rate of stirring significantly affected 1,3-PD productivity, whereas air aeration and pH were not effective. A quadratic polynomial equation was obtained for 1,3-PD productivity by multiple regression analysis using response surface methodology. The validation experimental confirmed with the predicted model. The optimum combinations for 1,3-PD productivity was glycerol, rate of stirring, air aeration, and pH of 50 g/l, 318 rpm, 0.6 vvm, 6.48, respectively. The subsequent fed batch experiments produced 1,3-PD of 70 g/l at a fermentation of 30 h.     

Biosynthesis of 1,3-propanediol from recombinant E. coli by optimization process using pure and crude glycerol as a sole carbon source under two-phase fermentation system

The environmental and nutritional condition for 1,3-propanediol (1,3-PD) production by the novel recombinant E. coli BP41Y3 expressing fusion protein were first optimized using conventional approach. The optimum environmental conditions were: initial pH at 8.0, incubation at 37 °C without shaking and agitation. Among ten nutrient variables, fumarate, (NH₄)₂HPO₄ and peptone were selected to study on their interaction effect using the response surface methodology. The optimum medium contained modified Riesenberg medium (containing pure glycerol as a sole carbon source) supplemented with 63.65 mM fumarate, 3.80 g/L (NH₄)₂HPO₄ and 1.12 g/L peptone, giving the maximum 1,3-PD production of 2.43 g/L. This was 3.5-fold higher than the original medium (0.7 g/L). Two-phase cultivation system was conducted and the effect of pH control (at 6.5, 7.0 and 8.0) was investigated under anaerobic condition by comparing with the no pH control condition. The cultivation system without pH control (initial pH of 8.0) gave the maximum values of 1.65 g/L 1,3-PD, the 1,3-PD production rate of 0.13 g/L h and the yield of 0.31 mol 1,3-PD/mol crude glycerol. Hence, using crude glycerol as a sole carbon source resulted in 32 % lower 1,3-PD production from this recombinant strain that may be due to the presence of various impurities in the crude glycerol of biodiesel plant. In addition, succinic acid was found to be a major product during fermentation by giving the maximum concentration of 11.92 g/L after 24 h anaerobic cultivation.     

Efficient production of ethanol from crude glycerol by a Klebsiella pneumoniae mutant strain

A mutant strain of Klebsiella pneumoniae, termed GEM167, was obtained by γ irradiation, in which glycerol metabolism was dramatically affected on exposure to γ rays. Levels of metabolites of the glycerol reductive pathway, 1,3-propanediol (1,3-PD) and 3-hydroxypropionic acid (3-HP), were decreased in the GEM167 strain compared to a control strain, whereas the levels of metabolites derived from the oxidative pathway, 2,3-butanediol (2,3-BD), ethanol, lactate, and succinate, were increased. Notably, ethanol production from glycerol was greatly enhanced upon fermentation by the mutant strain, to a maximum production level of 21.5 g/l, with a productivity of 0.93 g/l/h. Ethanol production level was further improved to 25.0 g/l upon overexpression of Zymomonas mobilispdc and adhII genes encoding pyruvate decarboxylase (Pdc) and aldehyde dehydrogenase (Adh), respectively in the mutant strain GEM167.     

Characterization of recombinantE. coli ATCC 11303 (pLOI 297) in the conversion of cellulose and xylose to ethanol

This work describes the characterization of recombinantEsherichia coli ATCC 11303 (pLOI 297) in the production of ethanol from cellulose and xylose. We have examined the fermentation of glucose and xylose, both individually and in mixtures, and the selectivity of ethanol production under various conditions of operation. Xylose metabolism was strongly inhibited by the presence of glucose. Ethanol was a strong inhibitor of both glucose and xylose fermentations; the maximum ethanol levels achieved at 37°C and 42°C were about 50 g/l and 25 g/l respectively. Simmultaneous sacharification and fermentation of cellulose with recombinantE. coli and exogenous cellulose showed a high ethanol yield (84% of theoretical) in the hydrolysis regime of pH 5.0 and 37°C. The selectivity of organic acid formation relative to that of ethanol increased at extreme levels of initial glucose concentration; production of succinic and acetic acids increased at low levels of glucose ( <1 g/l), and lactic acid production increased when initial glucose was higher than 100 g/l.     

A novel and environment-friendly bioprocess of 1,3-propanediol fermentation integrated with aqueous two-phase extraction by ethanol/sodium carbonate system

An integrated fermentation–separation process for the production of 1,3-propanediol (1,3-PD) was investigated. Aqueous two-phase system (ATPS) not only recovered 97.9% of 1,3-PD, but simultaneously also removed 99.1% cells, 81.9% proteins, 75.5% organic acids, and 78.7% water. Furthermore, after extraction the bottom phase of ATPS was used to adjust the pH of the culture during fermentation, leading to 16% and 126% increases in the concentrations of 1,3-PD and lactic acid, and dramatic decreases in the concentration of acetic acid and formic acid. The total mass conversion yield of three main products (1,3-PD, 2,3-butanediol, and lactic acid) from glycerol reached 81.6%. The salt-enriched phase could also be used to absorb carbon dioxide (CO₂), resulting in 94% recovery for carbonate. Finally, process simulation using the program PRO/II showed the use of ATPS reduced 75.1% of the energy expenditure and 89.0% of CO₂ emissions.     

Accelerated production of 1,3-propanediol from glycerol by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> using the method of forced pH fluctuations

1,3-Propanediol (1,3-PD) is a bivalent alcohol, used in a number of chemical syntheses. It could be produced from glycerol in course of microbial fermentation by Klebsiella pneumoniae along with more than five minor liquid products. With the purpose to enhance 1,3-PD production and to eliminate by-products formation, principally new pH control on the process was applied. The method, named “forced pH fluctuations” was realized by consecutive raisings of pH with definite ΔpH amplitude (ranging from 1.0 to 2.0) at time intervals between 2 and 4 h, during a series of fed batch processes. The fermentation performed by forced pH fluctuations with ΔpH = 1.0, risen at every 3 h was evaluated as the most successful. Increase by 10% of the maximal amount of 1,3-PD (g/l), 22% higher productivity [g/(l h)], and 29% increase in 1,3-PD molar yield were achieved, compared to the referent fed batch (with constant pH = 7.0). In addition, significant decrease in by-products formation was obtained. The most important reduction was observed in the lactic and acetic acids yields, where 50 and 70% decrease were reached. The results suggested the potential of pH to manage the share and quantity of product spectrum in mixed diols–acids fermentations. The application of “forced pH fluctuations method” achieves the desirable increase in 1,3-PD formation and decrease in by-products accumulation at the same time by a comparatively simple approach by adjustment of one bioprocess parameter only.     

Consequences of cps mutation of Klebsiella pneumoniae on 1,3-propanediol fermentation

The filtration in 1,3-propanediol (1,3-PD) downstream process is influenced by the large amounts of capsular polysaccharides (CPS) produced by Klebsiella pneumoniae CGMCC 1.6366. The morphological and fermentation properties were investigated with the CPS-deficient mutant K. pneumoniae CGMCC 1.6366 CPS. Similar biomass was obtained with CGMCC 1.6366, and the mutant strain in batch cultures indicating the cell growth was slightly inhibited by CPS defection. The viscosity of fermentation broth by mutant strain decreased by 27.45%. The flux with ceramic membrane filter was enhanced from 168.12 to 303.6 l h⁻¹ m⁻², exhibiting the great importance for downstream processing of 1,3-PD fermentation. The products spectrum of mutant isolate changed remarkably regarding to the concentration of fermentation products. The synthesis of important 1,3-PD and 2,3-butanediol was enhanced from 9.73 and 4.06 g l⁻¹ to 10.37 and 4.77 g l⁻¹ in batch cultures. The noncapsuled K. pneumoniae provided higher 1,3-PD yield of 0.54 mol mol⁻¹ than that of encapsuled wild parent in batch cultures. The fed-batch fermentation of mutant strain resulted in 1,3-PD concentration, yield, and productivity of 78.13 g l⁻¹, 0.53 mol mol⁻¹, and 1.95 g l⁻¹ h⁻¹, respectively.