Quantifying thigh muscle co-activation during isometric knee extension contractions: Within- and between-session reliability

Muscle co-activation around the knee is important during ambulation and balance. The wide range of methodological approaches for the quantification of co-activation index (CI) makes comparisons across studies and populations difficult. The present study determined within- and between-session reliability of different methodological approaches for the quantification of the CI of the knee extensor and flexor muscles during maximum voluntary isometric contractions (MVICs). Eight healthy volunteers participated in two repeated testing sessions. A series of knee extension MVICs of the dominant leg with concomitant torque and electromyographic (EMG) recordings were captured. CI was calculated utilizing different analytical approaches. Intraclass correlation coefficient (ICC) showed that within-session measures displayed higher reliability (ICC > 0.861) and lower variability (Coefficient of variation; CV < 21.8%) than between-session measures (ICC < 0.645; CV > 24.2%). A selection of a 500 ms or larger window of RMS EMG activity around the PT delivered more reliable and less variable results than other approaches. Our findings suggest that the CI can provide a reliable measure for comparisons among conditions and is best utilized for within-session experimental designs.     

Reliability and precision of EMG in leg,torso, and arm muscles during running

Changes in electromyographic (EMG) parameters are used to evaluate timing, amplitude, and fatigue of muscle actions during movement. Little published data describe the reliability and precision of multiple EMG parameters, how these parameters compare to one another, and how these parameters vary between muscles. The purpose of this study was to determine the reliability and precision of four EMG parameters recorded from the legs, torso, and arm muscles during running. Fifteen well-trained male runners performed moderate-intensity treadmill running while EMG data were collected from thirteen muscles. Integrated EMG (iEMG), root mean square EMG (RMS), maximum M-wave, and median power frequency (MPF) were calculated for 25 consecutive strides. Intra-class correlation coefficients (ICC) and standard error of measurement (SEM) for each parameter were calculated for each muscle. Seven muscles displayed good reliability (ICC > 0.80) for all parameters studied. MPF was the most reliable variable, with 12 muscles having ICC > 0.80 and <6% normalized SEM. Reliability and precision differed between muscles of similar function and anatomic region. These data emphasize the need for researchers and clinicians to have reliability and precision measures for all parameters of each muscle, and demonstrates that generalizations must be used cautiously when interpreting EMG data collected during running.     

Internal consistency and test–retest reliability of an instrumented functional reaching task using wireless electromyographic sensors

The purpose of this study was to establish the internal consistency and test–retest reliability of the electromyographic and accelerometric data sampled from the prime movers of the dominant arm during an antigravity, within-arm’s length stand-reaching task without trunk restraint. Ten healthy young adults participated in two experimental sessions, approximately 7–10 days apart. During each session, subjects performed 15 trials of both a flexion- and an abduction-reaching task. Surface EMG and acceleration using wireless sensors were sampled from the anterior and middle deltoid. Reliability was established using Cronbach’s alpha, intraclass correlation coefficients (ICC 2, k) and standard error of measurements (SEM) for electromyographic reaction time, burst duration and normalized amplitude along with peak acceleration. Results indicated high degrees of inter-trial and test–retest reliability for flexion (Cronbach’s α range = 0.92–0.99; ICC range = 0.82–0.92) as well as abduction (Cronbach’s α range = 0.94–0.99; ICC range = 0.81–0.94) reaching. The SEM associated with response variables for flexion and abduction ranged from 1.55–3.26% and 3.33–3.95% of means, respectively. Findings from this study revealed that electromyographic and accelerometric data collected from prime movers of the arm during the relatively functional stand-reaching task were highly reproducible. Given its high reliability and portability, the proposed test could have applications in clinical and laboratory settings to quantify upper limb function.     

Reliability and minimal detectable change in scapulothoracic neuromuscular activity

Alterations in scapular muscle activity, including excess activation of the upper trapezius (UT) and onset latencies of the lower trapezius (LT) and serratus anterior (SA) muscles, are associated with abnormal scapular motion and shoulder impingement. Limited information exists on the reliability of neuromuscular activity to demonstrate the efficacy of interventions. The purpose of this study was to characterize the reproducibility of scapular muscle activity (mean activity, relative onset timing) over time and establish the minimal detectable change (MDC). Surface electromyography (sEMG) of the UT, LT, SA and anterior deltoid (AD) muscles in 16 adults were captured during an overhead lifting task in two sessions, one-week apart. sEMG data were also normalized to maximum isometric contraction and the relative onset and mean muscle activity during concentric and eccentric phases of the scapular muscles were calculated. Additionally, reliability of the absolute sEMG data during the lifting task and MVIC was evaluated. Both intrasession and intersession reliability of normalized and absolute mean scapular muscle activity, assessed with intraclass correlation coefficients (ICC), ranged from 0.62 to 0.99; MDC values were between 1.3% and 11.7% MVIC and 24 to 135 mV absolute sEMG. Reliability of sEMG during MVIC was ICC = 0.82–0.99, with the exception of intersession upper trapezius reliability (ICC = 0.36). Within session reliability of muscle onset times was ICC = 0.88–0.97, but between session reliability was lower with ICC = 0.43–0.73; MDC were between 39 and 237 ms. Small changes in scapular neuromuscular mean activity (>11.7% MVIC) can be interpreted as meaningful change, while change in muscle onset timing in light of specific processing parameters used in this study is more variable.     

Mandibular kinematics and masticatory muscles EMG in patients with short lasting TMD of mild-moderate severity

Mandibular kinematic and standardized surface electromyography (sEMG) characteristics of masticatory muscles of subjects with short lasting TMD of mild-moderate severity were examined.Volunteers were submitted to clinical examination and questionnaire of severity. Ten subjects with TMD (age 27.3 years, SD 7.8) and 10 control subjects without TMD, matched by age, were selected.Mandibular movements were recorded during free maximum mouth opening and closing (O–C) and unilateral, left and right, gum chewing. sEMG of the masseter and temporal muscles was performed during maximum teeth clenching either on cotton rolls or in intercuspal position, and during gum chewing. sEMG indices were obtained. Subjects with TMD, relative to control subjects, had lower relative mandibular rotation at the end of mouth opening, larger mean number of intersection between interincisal O–C paths during mastication and smaller asymmetry between working and balancing side, with participation beyond the expected of the contralateral muscles (P < 0.05, t-test). Overall, TMD subjects showed similarities with the control subjects in several kinematic parameters and the EMG indices of the static test, although some changes in the mastication were observed.     

Within-day and between-days reliability of quadriceps isometric muscle fatigue using mechanomyography on healthy subjects

This study aimed to examine within-day and between-days intratester reliability of mechanomyography (MMG) in assessing muscle fatigue. An accelerometer was used to detect the MMG signal from rectus femoris. Thirty one healthy subjects (15 males) with no prior knee problems initially performed three maximum voluntary contractions (MVCs) using an ISOCOM dynamometer. After 10 min rest, subjects performed a fatiguing protocol in which they performed three isometric knee extensions at 75% MVC for 40 s. The fatiguing protocol was repeated on two other days, two to four days apart for between-days reliability. MMG activity was determined by overall root mean squared amplitude (RMS), mean power frequency (MPF) and median frequency (MF) during a 40 s contraction. RMS, MPF and MF linear regression slopes were also analysed. Intraclass Correlation Coefficients (ICC); ICC1,1 and ICC1,2 were used to assess within-day reliability and between-days reliability respectively. Standard error of measurement (SEM) and smallest detectable difference (SDD) described the within-subjects variability. MMG fatigue measures using linear regression slopes showed low reliability and large between-days error (ICC1,2 = 0.43–0.46; SDD = 306.0–324.8% for MPF and MF slopes respectively). Overall MPF and MF, on the other hand, were reliable with high ICCs and lower SDDs compared to linear slopes (ICC1,2 = 0.79–0.83; SDD = 21.9–22.8% for MPF and MF respectively). ICC1,2 for overall MMG RMS and linear RMS slopes were 0.81 and 0.66 respectively; however, the SDDs were high (56.4% and 268.8% respectively). The poor between-days reliability found in this study suggests caution in using MMG RMS, MPF and MF and their corresponding slopes in assessing muscle fatigue.     

The reliability of determining the onset of medial gastrocnemius muscle activity during a stretch-shorten-cycle action

The instant at which a muscle increases its level of activity from baseline represents the onset of muscle activity. Accurate identification of muscle onset allows determination of temporal and amplitude characteristics of the surface electromyography (sEMG) signal. This investigation determined the intra- and inter-tester reliability for determining the onset of medial gastrocnemius (MG) activity using visual and automated methods. One hundred hop cycles, performed at 2.2 Hz, were selected from sEMG recordings (bandpass filtered 50–500 Hz and full wave rectified) of ten participants who performed three trials of single-leg hopping. The onset of MG muscle activity was identified by 3 separate investigators on two separate occasions and an automated method (10% of the peak activation amplitude). The duration of the anticipatory period, from muscle onset to initial ground contact, was then determined. Intra-tester (ICC from 0.72 to 0.95) and inter-tester reliability (ICC from 0.70 to 0.88) were high as was comparison to the automated method (ICC = 0.90). These findings indicate that visual onset detection was highly reproducible between testing sessions, independent investigators and comparable to an automated method. These methods may be used reliably to determine the onset of MG muscle activity during a stretch-shorten-cycle muscle action.     

Intra-session and inter-day reliability of forearm surface EMG during varying hand grip forces

Surface electromyography (EMG) is widely used to evaluate forearm muscle function and predict hand grip forces; however, there is a lack of literature on its intra-session and inter-day reliability. The aim of this study was to determine reliability of surface EMG of finger and wrist flexor muscles across varying grip forces. Surface EMG was measured from six forearm flexor muscles of 23 healthy adults. Eleven of these subjects undertook inter-day test–retest. Six repetitions of five randomized isometric grip forces between 0% and 80% of maximum force (MVC) were recorded and normalized to MVC. Intra- and inter-day reliability were calculated through the intraclass correlation coefficient (ICC) and standard error of measurement (SEM).Normalized EMG produced excellent intra-session ICC of 0.90 when repeated measurements were averaged. Intra-session SEM was low at low grip forces, however, corresponding normalized SEM was high (23–45%) due to the small magnitude of EMG signals. This may limit the ability to evaluate finer forearm muscle function and hand grip forces in daily tasks. Combining EMG of functionally related muscles improved intra-session SEM, improving within-subject reliability without taking multiple measurements. Removing and replacing electrodes inter-day produced poor ICC (ICC < 0.50) but did not substantially affect SEM.     

How reliable are lower limb biomechanical variables during running and cutting tasks

The purpose of this study was to compare the within- and between-days reliability of lower limb biomechanical variables collected during running and cutting tasks. Methods: 15 recreational athletes, 7 males and 8 females, took part in three testing sessions, two sessions on the same day with an hour gap and another session one week later. Kinematic and kinetic data during running and 90° side step cutting tasks gathered using a ten-camera motion analysis system (Qualisys) and a force platform (AMTI) embedded into the floor. Results: During both tasks, within-day ICC values for joint angles (ICCrun = 0.63–0.94 and ICCcut = 0.63–0.96) were higher than between days (ICCrun = 0.51–0.72 and ICCcut = 0.42–0.83). Out of five moments tested in each task, within-day ICC values (ICCrun = 0.64–0.89 and ICCcut = 0.79–0.94) were higher than between days (ICCrun = 0.58–0.91 and ICCcut = 0.83–0.92). During running task, within and between-day SEM values for joint moments ranged between (0.07–0.39 N m kg) and between (0.98°–5.14°) for joint angles. While during cutting, SEM values for moments ranged between (0.13–0.56 N m kg) and between (1.73–5.15) for joint angle measurement. The GRF data, in both tasks, were more reliable (ICCrun ⩾ 0.84 and ICCcut ⩾ 0.88) as compared to angles (ICCrun ⩾ 0.51 and ICCcut ⩾ 0.42), and moments (ICCrun ⩾ 0.58 and ICCcut ⩾ 0.79) data. These findings are relevant to those undertaking intervention studies because of the potential for large measurement variability when examining certain variables, which would then require considerable changes in these variables to show “real” effects of the interventions beyond measurement error.     

Comparison between muscle activation measured by electromyography and muscle thickness measured using ultrasonography for effective muscle assessment

In this study, we aimed to compare the intrarater reliability and validity of muscle thickness measured using ultrasonography (US) and muscle activity via electromyography (EMG) during manual muscle testing (MMT) of the external oblique (EO) and lumbar multifidus (MF) muscles. The study subjects were 30 healthy individuals who underwent MMT at different grades. EMG was used to measure the muscle activity in terms of ratio to maximum voluntary contraction (MVC) and root mean square (RMS) metrics. US was used to measure the raw muscle thickness, the ratio of muscle thickness at MVC, and the ratio of muscle thickness at rest. One examiner performed measurements on each subject in 3 trials. The intrarater reliabilities of the % MVC RMS and raw RMS metrics for EMG and the % MVC thickness metrics for US were excellent (ICC = 0.81–0.98). There was a significant difference between all the grades measured using the % MVC thickness metric (p < 0.01). Further, this % MVC thickness metric of US showed a significantly higher correlation with the EMG measurement methods than with the others (r = 0.51–0.61). Our findings suggest that the % MVC thickness determined by US was the most sensitive of all methods for assessing the MMT grade.     

Reference database of the gait cycle for young healthy Tunisian adults

BackgroundQuantified gait analysis is a rising technology used increasingly to assess motor disorders. Normal reference data are required in order to evaluate patients, but there are no reference data available for the Tunisian healthy population.AimTo assess the features of normal Tunisian gait pattern, and examine the intrinsic reliability of spatio-temporal, kinematic and kinetic parameters within a new specific reference database.MethodsEighteen healthy active-young adults (age: 23.30 ± 2.54 years, height: 1.78 ± 0.04 m and, weight: 70.00 ± 4.80 kg) have participated to five trials of step gait where the dominant lower limb were recorded. Two over the five trials were randomly selected to be further analyzed. Twenty-three spatio-temporal, kinematic and kinetic parameters determined from 3-dimensional gait analysis. The intrinsic reliability was examined for each variable and our results were compared with those available in the literature.ResultsTwelve over 23 parameters have an excellent intrinsic reliability (P > 0.05, ICC > 0.9 and SEM < 5% of the grand mean). There are similarities with other studies (P < 0.05) but we noticed the existence of some specificity (the height of hip extension peak and the low cadence of gait) that could characterize the Tunisian population.ConclusionA specific reference database of the gait cycle has been established for healthy Tunisian active-young adults and excellent inter-trial reliability may be observed for different variables.     

Introducing a novel test with unanticipated medial/lateral diagonal hops that reliably captures hip and knee kinematics in healthy women

Despite a vast literature on one-leg hops and cutting maneuvers assessing knee control pre/post-injury of the anterior cruciate ligament (ACL), comprehensive and reliable tests performed under unpredictable conditions are lacking. This study aimed to: (1) assess the feasibility of an innovative, knee-challenging, one-leg double-hop test consisting of a forward hop followed by a diagonal hop (45°) performed medially (UMDH) or laterally (ULDH) in an unanticipated manner; and (2) determine within- and between-session reliability for 3-dimensional hip and knee kinematics and kinetics of these tests. Twenty-two healthy women (22.3 ± 3.3 years) performed three successful UMDH and ULDH, twice 1–4 weeks apart. Hop success rate was 69–84%. Peak hip and knee angles demonstrated moderate to excellent within-session reliability (intraclass correlation coefficient [ICC] 95% confidence interval [CI]: 0.67–0.99, standard error of measurement [SEM] ≤  3°) and poor to excellent between-session reliability (ICC CI: 0.22–0.94, SEM ≤ 3°) for UMDH and ULDH. The smallest real difference (SRD) was low (≤ 5°) for nearly all peak angles. Peak hip and knee moments demonstrated poor to excellent reliability (ICC CI: 0–0.97) and, in general, moments were more reliable within-session (SEM ≤ 0.14 N.m/kg.m, both directions) than between-session (SRD ≤ 0.43 N.m/kg.m). Our novel test was feasible and, in most but not all cases, provided reliable angle estimates (within-session > between-session, both directions) albeit less reliable moments (within-session > between-session, both directions). The relatively large hip and knee movements in the frontal and transverse planes during the unanticipated hops suggest substantial challenge of dynamic knee control. Thus, the test seems appropriate for evaluating knee function during ACL injury rehabilitation.     

Test–retest reliability of the soleus H-reflex is affected by joint positions and muscle force levels

The purpose of this study was to determine the test–retest reliability of the soleus (SOL) H-reflex during rest and isometric contractions at 10%, 30%, and 50% of the maximal voluntary force (MVC) at the ankle joint angles of neutral (0°), plantarflexion (20°), and dorsiflexion (?20°) respectively, in a sitting position. Ten healthy participants, with mean age of 24.9 ± 5.0 (SD) years, height 168.3 ± 8.8 cm, weight 62.7 ± 12.3 kg, were tested for the SOL H-reflex (H_max) on two separate occasions within 7 days. The intraclass correlation coefficient (ICC) for the test–retest of the SOL H-reflex during rest was found to be high at ankle joint angle of neutral (ICC = 0.92) and plantarflexion (0.96), and moderate at dorsiflexion (0.75). Inconsistent ICC values (range from 0.62 to 0.97) were found during the submaximal voluntary contractions at the three ankle joint positions. High ICCs were also found in H_max/M_max ratio at neutral (0.86), plantarflexion (0.96), and dorsiflexion (0.84) positions. It was concluded that the test–retest reliability of the SOL H-reflex was affected by the intensity of voluntary contraction and ankle joint position. The H-reflex demonstrated a higher reliability at the neutral and plantarflexion positions than that at the dorsiflexion position during rest, and a higher reliability at 10% MVC than that at 30% and 50% MVC.     

Reliability of electromyographic amplitude values of the upper limb muscles during closed kinetic chain exercises with stable and unstable surfaces

The purpose of the present study was to evaluate the intra and interday reliability of surface electromyographic amplitude values of the scapular girdle muscles and upper limbs during 3 isometric closed kinetic chain exercises, involving upper limbs with the fixed distal segment extremity on stable base of support and on a Swiss ball (relatively unstable). Twenty healthy adults performed the exercises push-up, bench-press and wall-press with different effort levels (80% and 100% maximal load). Subjects performed three maximal voluntary contractions (MVC) in muscular testing position of each muscle to obtain a reference value for root mean square (RMS) normalization. Individuals were instructed to randomly perform three isometric contraction series, in which each exercise lasted 6 s with a 2-min resting-period between series and exercises. Intra and interday reliabilities were calculated through the intraclass correlation coefficient (ICC 2.1), standard error of the measurement (SEM). Results indicated an excellent intraday reliability of electromyographic amplitude values (ICC ? 0.75). The interday reliability of normalized RMS values ranged between good and excellent (ICC 0.52–0.98). Finally, it is suggested that the reliability of normalized electromyographic amplitude values of the analyzed muscles present better values during exercises on a stable surface. However, load levels used during the exercises do not seem to have any influence on variability levels, possibly because the loads were quite similar.     

Between-day reliability of a hand-held dynamometer and surface electromyography recordings during isometric submaximal contractions in different shoulder positions

Functional shoulder assessments require the use of objective and reliable standardized outcome measures. Therefore, the aim of this study was to examine the between-day reliability of a hand-held dynamometer when measuring muscle strength during flexion, abduction, and internal and external rotation as well as surface electromyography (EMG) when measuring muscle activity from m. trapezius superior and deltoideus anterior. Twenty-four healthy subjects participated and performed four isometric contractions measured with a hand-held dynamometer and EMG. Both relative and absolute reliability were calculated based on the mean of the last three of the four repetitions. EMG amplitude was assessed calculating both absolute and normalized root-mean-square (RMS) values. The reliability of the hand-held dynamometer was high (LOA = 3.2–7.6% and ICC = 0.89–0.98). The absolute reliability for EMG showed similar results for absolute RMS values (LOA = 20.0–68.4%) and normalized RMS values (LOA = 42.4–66.5%). However, the results concerning the relative reliability showed higher ICC for absolute RMS values (ICC = 0.82–0.92) compared with normalized values (ICC = 0.57–0.72).The outcome measurements of this study with healthy subjects were found reliable and, therefore, have the potential to detect changes in muscle strength and muscle activity.     

Two novel methods to assess ulnar nerve conduction across the elbow

PurposeNerve conduction studies (NCS) are used as an electrodiagnostic method for diagnosing ulnar neuropathy of the elbow (UNE). The purpose of this study was to determine normal and reliability values of across elbow ulnar nerve conduction velocity using two novel methods.MethodsUlnar nerve conduction studies were performed on both upper extremities of 104 healthy subjects. Two different techniques were used to evaluate ulnar nerve function at the elbow: Technique 1 (W-BE-AE) determined mixed NCV across the elbow indirectly while Technique 2 (BE-AE) measured conduction time directly. Twenty subjects returned within one week for re-testing to generate reliability data.ResultsThe mean NCV for the BE-AE segment using Technique 1 was 59.68 m/s (±8.91 m/s). The mean peak latency for the BE-AE segment using Technique 2 was 2.03 ms (±0.24 ms). The interrater and intrarater reliability intraclass correlation coefficient (ICC) for Technique 1 was 0.454 and 0.756, respectively. For Technique 2, the interrater and intrarater reliability ICC was 0.76 and 0.814, respectively.ConclusionThis study identified normal values for ulnar nerve conduction across the elbow with reliability ranging from poor to good, depending on the technique. These two novel techniques provide alternative methods to traditional techniques to measure ulnar nerve conduction across the elbow.     

Estimating severity of sideways fall using a generic multi linear regression model based on kinematic input variables

Many research groups have studied fall impact mechanics to understand how fall severity can be reduced to prevent hip fractures. Yet, direct impact force measurements with force plates are restricted to a very limited repertoire of experimental falls. The purpose of this study was to develop a generic model for estimating hip impact forces (i.e. fall severity) in in vivo sideways falls without the use of force plates.Twelve experienced judokas performed sideways Martial Arts (MA) and Block (‘natural’) falls on a force plate, both with and without a mat on top. Data were analyzed to determine the hip impact force and to derive 11 selected (subject-specific and kinematic) variables. Falls from kneeling height were used to perform a stepwise regression procedure to assess the effects of these input variables and build the model.The final model includes four input variables, involving one subject-specific measure and three kinematic variables: maximum upper body deceleration, body mass, shoulder angle at the instant of ‘maximum impact’ and maximum hip deceleration. The results showed that estimated and measured hip impact forces were linearly related (explained variances ranging from 46 to 63%). Hip impact forces of MA falls onto the mat from a standing position (3650 ± 916 N) estimated by the final model were comparable with measured values (3698 ± 689 N), even though these data were not used for training the model. In conclusion, a generic linear regression model was developed that enables the assessment of fall severity through kinematic measures of sideways falls, without using force plates.     

Intrarater reliability and agreement of linear encoder derived heel-rise endurance test outcome measures in healthy adults

A linear encoder measuring vertical displacement during the heel-rise endurance test (HRET) enables the assessment of work and maximum height in addition to the traditional repetitions measure. We aimed to compare the test-retest reliability and agreement of these three outcome measures. Thirty-eight healthy participants (20 females, 18 males) performed the HRET on two occasions separated by a minimum of seven days. Reliability was assessed by the intraclass correlation coefficient (ICC) and agreement by a range of measures including the standard error of measurement (SEM), coefficient of variation (CV), and 95% limits of agreement (LoA). Reliability for repetitions (ICC = 0.77 (0.66, 0.85)) was equivalent to work (ICC = 0.84 (95% CI 0.76, 0.89)) and maximum height (ICC = 0.85 (0.77, 0.90)). Agreement for repetitions (SEM = 6.7 (5.8, 7.9); CV = 13.9% (11.9, 16.8%); LoA = −1.9 ± 37.2%) was equivalent to work (SEM = 419 J (361, 499 J); CV = 13.1% (11.2, 15.8%); LoA = 0.1 ± 34.8%) with maximum height superior (SEM = 0.8 cm (0.6, 1.0 cm); CV = 6.6% (5.7, 7.9%); LoA = 1.3 ± 17.1%). Work and maximum height demonstrated acceptable reliability and agreement that was at least equivalent to the traditional repetitions measure.     

Characteristics of the nociceptive withdrawal response elicited under aware and unaware conditions

BackgroundNociceptive withdrawal reflexes (NWR) are subject to supraspinal modulation. Therefore, awareness about a noxious stimulation may affect its characteristics. The goal of this study was to investigate the effect of different degrees of awareness on the NWR.MethodEight subjects performed back and forth hand movements from a common starting point towards four visual targets during which NWR was evoked when subjects were either unaware or aware of a noxious stimulation (unaware-NWR and aware-NWR). For the comparison between the NWR under both conditions, onset latencies and kinematic variables were computed respectively from the recorded Biceps Brachii EMG and from the spatial coordinates of hand reflective markers.ResultsThe onset latency of unaware-NWR (mean ± SD 73.9 ± 13 ms) was significantly shorter than that of the aware-NWR (91.1 ± 27 ms, p < 0.05). The total duration of the muscular activation was shorter in unaware-NWR than in aware-NWR. The slopes of the tangential velocity–time curves were steeper for unaware-NWR than for aware-NWR (p = 0.057).ConclusionsThe results suggest that supraspinal regulation of NWR under different degrees of awareness involves the re-parameterization of selected spatiotemporal aspects of a pre-structured motor response.     

Oestrus cycle characteristics and prediction of ovulation in Catalonian jennies

The Catalonian donkey breed is in danger of extinction, and much needs to be learned about the reproductive features of its females if breeding and conservation programmes are to be successful. This study reports the oestrous behaviour, oestrus cycle characteristics and dynamic ovarian events witnessed during 50 oestrous cycles (involving 106 ovulations) in 10 Catalonian jennies between March 2002 and January 2005. These jennies were teased, palpated transrectally and examined by ultrasound using a 5 MHz linear transducer—daily during oestrus and every other day during dioestrus. Predictors of ovulation were sought among the variables recorded.The most evident signs of oestrus were mouth clapping (the frequent vertical opening and closing of the mouth with ears depressed against the extended neck) and occasional urinating and winking of the vulval lips (homotypical behaviour). Interactions between jennies in oestrus were also recorded, including mounting, herding/chasing, the Flehmen response, and vocalization (heterotypical behaviour).Nine jennies ovulated regularly throughout the year; one had two anovulatory periods (54 and 35 days). The length of the oestrus cycle was 24.90 ± 0.26 days, with oestrus itself lasting 5.64 ± 0.20 days (mean ± S.E.M.) and dioestrus 19.83 ± 0.36 days. The incidence of single, double and triple ovulations was 55.66% (n = 59), 42.45% (n = 45) and 1.89% (n = 2), respectively. No significant difference was seen in the number of ovulations involving the left and right ovaries (52.63% [n = 70] compared to 47.37% [n = 63] respectively; P > 0.05). The mean interval between double ovulation was 1.44 ± 3.98 days. The mean diameter of the preovulatory follicle at day −1 was 44.9 ± 0.5 mm; the mean growth rate over the 5 days before ovulation was 3.7 mm/day.Data on preovulatory changes in oestrous behaviour, follicle size, follicle texture, the echographic appearance of the follicle and uterus, and uterine tone were subjected to stepwise logistic regression analysis to detect predictors of ovulation. The logit function showed the best predictors to be follicle size, follicular texture and oestrous behaviour. Certain combinations of these three variables allow the prediction of ovulation within 24 h with a probability of >75%.