利用不相容质粒共转化大肠杆菌对Cre重组酶体内重组活性的可视检测

源自噬菌体P1的Cre重组酶可以识别 34bp的靶DNA序列loxP ,进行位点特异性的重组反应。为了简便地检测Cre酶在大肠杆菌中的重组活性 ,分别将cre基因和上下游带有loxP的绿色荧光蛋白基因 (gfp)克隆到具有不同抗性的两种不相容质粒中 ,然后将构建的原核表达载体pET30a Cre和pET2 3b loxGFP电击共转化大肠杆菌BL2 1(DE3) ,利用卡那霉素和氨苄青霉素双抗生素抗性进行筛选。通过直接观察转化子的绿色荧光 ,便可以显示Cre酶的体内重组活性 ,并进一步通过SDS PAGE分析、质粒酶切鉴定进行了验证。结果表明 :以gfp为报告基因、通过两种不相容质粒共转化大肠杆菌可以为研究和改进Cre loxP重组系统提供一种简便直观的检测方法     

成骨细胞特异性表达Cre重组酶转基因小鼠的建立

构建了含有骨钙素基因启动子、Cre重组酶基因和人生长激素基因polyA的转基因载体pOC-Cre, 以显微注射的方法将4.6 kb的转基因片段OC-Cre导入小鼠受精卵。16只子代小鼠中经PCR和Southern杂交鉴定, 有2只小鼠携带外源基因, 整合率为12.5%。为了检测OC-Cre在转基因小鼠中表达的组织特异性, 将转基因首建者小鼠与基因组上携带有LoxP位点的条件性Smad4基因敲除小鼠交配, PCR结果显示, 仅在子代纯合型小鼠骨组织基因组中扩增出了Cre介导重组后的片段。将OC-Cre转基因小鼠与ROSA26报告小鼠交配, 利用LacZ染色对双转基因阳性子代小鼠进行检测, 结果显示Cre重组酶在成骨细胞中特异性表达并介导ROSA基因座LoxP位点间的重组。所有这些结果说明：所建立的OC-Cre转基因小鼠在成骨细胞中特异性表达Cre重组酶, 并能在体内介导成骨细胞基因组上LoxP位点间的重组, 是一种理想的研制成骨细胞特异性基因敲除小鼠的工具小鼠。     

中枢神经系统特异性表达Cre重组酶的转基因小鼠

利用从129sv小鼠基因组文库克隆得到的1．8kb的胶质细胞原纤维酸性蛋白(GFAP)基因的5′端调控序列,构建了含有2个β—珠蛋白绝缘子、GFAP5′端调控区、Cre基因和人生长激素基因(hGH)polyA的转基因载体pGFAP—Cre—hGH。以显微注射的方法将7．6kb的转基因片段pGFAP—Cre—hGH引入191枚小鼠基因组受精卵,其中176枚分别移植至8只假孕母鼠的输卵管中使其发育,共获得子代小鼠25只。经PCR和Southern杂交鉴定其中7只小鼠基因组上整合有Cre基因,整合率为28％。用整合有Cre基因的转基因小鼠与基因组上整合有LoxP位点和LacZ表达框的ROSA26鼠杂交,以检测Cre酶的活性、组织特异性及其介导的两个LoxP位点间的重组。LacZ染色结果表明,GFAP—Cre转基因小鼠只在中枢神经系统中表达Cre重组酶并能在体内成功介导LoxP位点间的重组。     

改良型痘苗病毒安卡拉株表达系统可删除筛选标记的双表达穿梭载体

为了构建改良型痘苗病毒安卡拉株表达系统可删除筛选标记的双表达穿梭载体,利用Cre/LoxP DNA重组系统以及本实验室表达Cre酶的BHK-21细胞系 (BHK-Cre),以大肠杆菌黄嘌呤-鸟嘌呤磷酸核糖转移酶 (Eco gpt) 为筛选标记构建可删除筛选标记的双表达穿梭载体pLR-gpt。将Eco gpt 基因以及调控其表达的启动子基因置于2个同向的LoxP位点之间,2个独立的多克隆位点位于2个LoxP位点之外,最终获得的重组病毒可以在BHK-Cre细胞系上删除筛选标记Eco gpt。为了验证系统的有效     

Cre重组酶表达载体的构建及其在转基因小鼠胰腺中的表达

组织特异性表达Cre重组酶的转基因小鼠是进行组织特异性条件敲除研究的关键。采用PCR扩增大鼠胰岛素基因705bp启动子指导发胰岛细胞中特异表达;同时采用改构的Cre重组酶基因,在其5'端添加有真核核糖体结合序列和核定位序列使Cre重组酶能穿越核膜在细胞核能发挥功能;同时,为了保证原核基因Cre能在真核系统顺利表达,在其3'端添加含内含子的人生长激素基因。构建的表达载体在去除原核序列后用显微注射方法转基因小鼠,在出生的27只仔鼠中,PCR检测共获得7只Cre整合阳性的转基因小鼠,整合率26％。这种Cre转基因小鼠与基因组小携带LoxP位点的条件基因打靶小鼠交配,在胰腺组织中可以检测到Cre介导的重组,表明Cre在转基因小鼠胰腺中有表达。     

Cre-LoxP重组系统的特点及其在抗体研究中的应用

Cre-LoxP系统是源于P1噬菌体的一个DNA重组体系,由Cre酶和相应的LoxP位点组成,它能导致重组发生在特定的DNA序列处(LoxP位点),该系统可以将外源基因定点整合到染色体上或将特定DNA片段删除,这种定位重组系统在大容量噬菌体抗体库,抗体重排,抗体的类型转换和抗体修饰等研究领域发挥了重要的作用.     

软骨组织特异性表达Cre重组酶转基因小鼠的研制和鉴定

构建了含有软骨组织特异性Ⅱ型胶原A1启动子和Cre重组酶基因的转基因载体pcol2Al-Cre。323枚小鼠受精卵经显微注射引入转基因片段后,分别移植至14只假孕母鼠的输卵管使其发育。共得到仔鼠52只,PCR结果显示其中10只小鼠基因组上有Cre基因的整合,整合率为19．2％。用整合有Cre基因的转基因小鼠与基因组上携带LoxP位点的条件基因打靶小鼠交配,以检测Cre酶介导的重组及其组织特异性。PCR结果表明：col2Al-Cre转基因小鼠软骨组织中表达的Cre重组酶成功地介导了LoxP之间的重组。此结果通过Southern杂交得到了进一步的证实。     

从伪狂犬病病毒中删除Cre/LoxP介导的报告基因

根据pEGFP-C1序列,设计并合成一对引物,通过PCR扩增出两端各含一个同向LoxP位点的GFP表达盒,克隆于转移载体pSKLR获得pSKLR-G-LoxP。通过经典同源重组方法,得到表达GFP的TK基因缺失伪狂犬病毒重组毒株S03109。该重组病毒在转染了pOG231(表达Cre重组酶)的293T细胞上连续传代,筛选得到重组病毒株S0419。荧光显微镜观察、Western blot及PCR检测结果表明,S03109感染细胞后持续表达GFP,而S0419不表达GFP。PCR证实S0419为含单个LoxP位点的TK基因缺失病毒,并且在细胞培养上遗传稳定,测序结果(GenBank登录号AY822465)表明,在Cre重组酶的作用下,两个同向LoxP序列之间的GFP表达盒被正确除去。对BALB/c小鼠的半数致死量(LD50)及免疫保护实验结果表明,S03109和S0419对BALB/c小鼠的LD50值均大于3×105PFU,免疫BALB/c小鼠,攻毒后平均存活率分别为67.5%与70%。以上结果表明,利用Cre/LoxP位点特异性重组系统,成功去除了插入重组伪狂犬病病毒基因组中的GFP报告基因。     

Cre-LoxP系统在炭疽芽胞杆菌基因敲除中的应用及eag基因的敲除

将Cre-LoxP系统应用于Bacillus anthracis中并成功敲除eag基因.以B.anthracis基因组为模板扩增得到上下游同源臂,联合两端带有LoxP位点的壮观霉素抗性基因片段构建好同源重组载体,转化B.anthracis AP422,通过一系列筛选得到带有抗性标记的重组菌.然后,通过转入Cre重组酶表达质粒,去除抗性标记,得到eag基因缺失的重组菌,并在DNA水平、RNA水甲和蛋白质水半进行了系统的鉴定.最终建立了Cre-LoxP系统在B.anthracis中的应用方法,并成功敲除eag基因.     

基于BAC重组酶系统构建莱航鸡多位点基因打靶载体的研究

以莱航鸡重复的rDNA基因间的间隔序列为靶位点,利用BAC重组酶系统构建含人干扰素基因的多位点基因打靶载体,为建立莱航鸡多位点基因打靶技术获得关键材料。首先构建BAC-TDN筛选载体,然后构建pYLVS-GID表达载体。将BAC-TDN筛选载体和pYLVS-GID表达载体共转化至大肠杆菌NS3529中,通过其Cre重组酶的作用形成BAC-TDN-VS-GID质粒,采用归位内切酶I-SceⅠ切除pYLVS质粒骨架,利用接头LS使之环化,构建成莱航鸡大容量多位点基因打靶载体BAC-TDN-GID。每次克隆均经酶切或PCR、测序等鉴定DNA片段的插入及插入方向。以该载体为材料的多位点基因打靶技术将提高基因定点整合效率,解决外源基因不能稳定表达、安全性等部分问题,突破了DNA重复序列不能作为外源基因整合靶位点的禁区。     

Turbo cloning: a fast, efficient method for cloning PCR products and other blunt-ended DNA fragments into plasmids.

The method uses a novel plasmid vector, p9lox5, containing a site-specific recombination sequence lox from the lox/Cre recombinase system of bacteriophage P1. There are two distinct stages. Firstly, vector and fragment DNAs are ligated intermolecularly under conditions of macromolecular crowding (15% polyethylene glycol 6000) which accelerate blunt-end joining a thousandfold. Secondly, circular recombinant molecules are efficiently excised from the ligation products by Cre recombinase acting on pairs of lox sites within directly repeated vector molecules flanking insert DNA. Recombinants are introduced into cells conventionally by transformation or electroporation. In both a model system and the cloning of PCR products, yields approaching those obtainable in cohesive-end cloning were achieved. Applications of the technique to cDNA library generation and recovery of DNA from archive material are discussed.     

利用Cre/lox重组系统建立反义基因工程雄性不育恢复系

利用Cre/lox重组系统中的Cre重组酶能特异性识别并介导两个同向lox位点之间DNA序列发生重组删除的特点,将TA29驱动下的反义豌豆卷须肌动蛋白基因置于两个同向lox位点之间并与Bar基因连锁,转化烟草Wisconsin 38后获得抗除草剂Basta的转基因植株.将Cre基因导入烟草Wisconsin 38建立雄性不育工程恢复系.反义Actin转基因植株与Cre转基因植株杂交获得F1,通过Cre重组酶将F1中的反义肌动蛋白基因表达盒删除实现育性的恢复.结果显示:来自豌豆卷须的肌动蛋白基因在Wisconsin 38烟草绒毡层中反义表达但未能导致明显的雄性不育,转基因植株在花器官形态、花粉形状、活力、结实、结籽等方面与野生型植株间无明显的差异.而获得的烟草Cre转基因工程恢复系除少量植株出现叶片褪绿、结果少等异常外,绝大多数植株形态结构及开花结果习性与野生型一致;其中3个Cre转基因工程恢复系与Actin反义肌动蛋白转基因植株TAA-3杂交后,杂交后代中的绝大多数反义肌动蛋白基因表达盒均被精确删除,表明将Cre/lox重组系统用于建立基于反义基因工程雄性不育的恢复系是可行的.     

Non‐parallel recombination limits cre‐loxP‐based reporters as precise indicators of conditional genetic manipulation

Cre/LoxP‐mediated recombination allows for conditional gene activation or inactivation. When combined with an independent lineage‐tracing reporter allele, this technique traces the lineage of presumptive genetically modified Cre‐expressing cells. Several studies have suggested that floxed alleles have differential sensitivities to Cre‐mediated recombination, which raises concerns regarding utilization of Cre‐reporters to monitor recombination of other floxed loci of interest. Here, we directly investigate the recombination correlation, at cellular resolution, between several floxed alleles induced by Cre‐expressing mouse lines. The recombination correlation between different reporter alleles varied greatly in otherwise genetically identical cell types. The chromosomal location of floxed alleles, distance between LoxP sites, sequences flanking the LoxP sites, and the level of Cre activity per cell all likely contribute to observed variations in recombination correlation. These findings directly demonstrate that, due to non‐parallel recombination events, commonly available Cre reporter mice cannot be reliably utilized, in all cases, to trace cells that have DNA recombination in independent‐target floxed alleles, and that careful validation of recombination correlations are required for proper interpretation of studies designed to trace the lineage of genetically modified populations, especially in mosaic situations. genesis 51:436–442. © 2013 Wiley Periodicals, Inc.     

Reversible dimer formation and stability of the anti-tumour single-chain Fv antibody MFE-23 by neutron scattering,analytical ultracentrifugation,and NMR and FT-IR spectroscopy

Cre recombinase uses two pairs of sequential cleavage and religation reactions to exchange homologous DNA strands between 34 base-pair (bp) LoxP recognition sequences. In the oligomeric recombination complex, a switch between "cleaving" and "non-cleaving" subunit conformations regulates the number, order, and regio-specificity of the strand exchanges. However, the particular sequence of events has been in question. From analysis of strand composition of the Holliday junction (HJ) intermediate, we determined that Cre initiates recombination of LoxP by cleaving the upper strand on the left arm. Cre preferred to react with the left arm of a LoxP suicide substrate, but at a similar rate to the right arm, indicating that the first strand to be exchanged is selected prior to cleavage. We propose that during complex assembly the cleaving subunit preferentially associates with the LoxP left arm, directing the first strand exchange to that side. In addition, this biased assembly would enforce productive orientation of LoxP sites in the recombination synapses. A novel Cre-HJ complex structure in which LoxP was oriented with the left arm bound by the cleaving Cre subunit suggested a physical basis for the strand exchange order. Lys86 and Lys201 interact with the left arm scissile adenine base differently than in structures that have a scissile guanine. These interactions are associated with positioning the 198-208 loop, a structural component of the conformational switch, in a configuration that is specific to the cleaving conformation. Our results suggest that strand exchange order and site alignment are regulated by an "induced fit" mechanism in which the cleaving conformation is selectively stabilized through protein-DNA interactions with the scissile base on the strand that is cleaved first.     

Cre-lox recombination in Escherichia coli cells. Mechanistic differences from the in vitro reaction.

The mechanism of the Cre recombinase of bacteriophage P1 in Escherichia coli cells was analyzed by topological methods in order to determine the important features of the in vivo reaction. Lambda infection was used to introduce the cre gene into cells containing plasmid substrates. The products of Cre resolution on substrates with directly repeated sites were predominantly free circles, even though decatenation by DNA gyrase was blocked by the drug norfloxacin. Recombination by Cre was greatly stimulated by negative supercoiling, and inversion occurred inefficiently. These results are strikingly different from those found with purified enzyme in vitro. Our data imply that Cre recombination in vivo is much more tightly controlled than it is in vitro, and that Cre acts predominantly as a resolvase in vivo. We suggest a role for Cre-mediated recombination in P1 plasmid amplification that is consistent with the selectivity of the enzyme in vivo.