Pathway of oxidative folding of secretory leucocyte protease inhibitor: an 8-disulfide protein exhibits a unique mechanism of folding

Secretory leucocyte protease inhibitor (SLPI) is a 107-amino acid protein with a high density of disulfide pairing (eight). The mechanism of oxidative folding of reduced and denatured SLPI has been investigated here. Despite an exceedingly large number of possible folding intermediates ( approximately 46 million disulfide isomers) and their potential to complicate the refolding process, oxidative folding of SLPI turns out to be surprisingly simple and efficient. Complete oxidative folding and a near-quantitative recovery of the native SLPI can be achieved in a simple buffer solution using air oxidation without any supplementing thiol catalyst or redox agent, a phenomenon that has not yet been observed with other disulfide proteins. Because of the heterogeneity and extensive overlapping of folding intermediates, identification of the predominant intermediate was unfeasible. Nonetheless, studies of reductive unfolding of native SLPI and oxidative folding of a six-disulfide variant of SLPI enable us to propose an underlying mechanism accounting for the unique folding efficiency of SLPI in the absence of a redox agent. Our studies indicate that oxidative folding of SLPI undergoes heterogeneous populations of one-, two-, three-, four-, five-, six-, and seven-disulfide isomers, including two nativelike isomers, SLPI-6A and SLPI-7A, as transient intermediates. Formation of the last two native disulfide bonds leading to the conversion of SLPI-6A --> SLPI-7A --> N-SLPI is relatively slow and represents the final stage of oxidative folding. Most importantly, free cysteines of SLPI-6A and SLPI-7A also act as a thiol catalyst in promoting the disulfide shuffling of diverse non-native intermediates accumulated along the folding pathway. This explains why a near-quantitative recovery of N-SLPI can be achieved in the absence of any thiol catalyst and redox agent. Properties of SLPI-6A and SLPI-7A were investigated and compared to those of other documented kinetic intermediates of oxidative folding. The correlation between the mechanism of SLPI folding and the three-dimensional structure of SLPI is also elaborated.     

The underlying mechanism for the diversity of disulfide folding pathways

The disulfide folding pathway of bovine pancreatic trypsin inhibitor (BPTI) is characterized by the predominance of folding intermediates with native-like structures. Our laboratory has recently analyzed the folding pathway(s) of four 3-disulfide-containing proteins, including hirudin, potato carboxypeptidase inhibitor, epidermal growth factor, and tick anticoagulant peptide. Their folding mechanism(s) differ from that of BPTI by 1) a higher degree of heterogeneity of 1- and 2-disulfide intermediates and 2) the presence of 3-disulfide scrambled isomers as folding intermediates. To search for the underlying causes of these diversities, we conducted kinetic analyses of the reductive unfolding of these five proteins. The experiment of reductive unfolding was designed to evaluate the relative stability and interdependence of disulfide bonds in the native protein. It is demonstrated here that among these five proteins, there exists a striking correlation between the mechanism(s) of reductive unfolding and that of oxidative folding. Those proteins with their native disulfide bonds reduced in a collective and simultaneous manner exhibit both a high degree of heterogeneity of folding intermediates and the accumulation of scrambled isomers along the folding pathway. A sequential reduction of the native disulfide bonds is associated with the presence of predominant intermediates with native- like structures.     

Role of kinetic intermediates in the folding of leech carboxypeptidase inhibitor

The oxidative folding and reductive unfolding pathways of leech carboxypeptidase inhibitor (LCI; four disulfides) have been characterized in this work by structural and kinetic analysis of the acid-trapped folding intermediates. The oxidative folding of reduced and denatured LCI proceeds rapidly through a sequential flow of 1-, 2-, 3-, and 4-disulfide (scrambled) species to reach the native form. Folding intermediates of LCI comprise two predominant 3-disulfide species (designated as III-A and III-B) and a heterogeneous population of scrambled isomers that consecutively accumulate along the folding reaction. Our study reveals that forms III-A and III-B exclusively contain native disulfide bonds and correspond to stable and partially structured species that interconvert, reaching an equilibrium prior to the formation of the scrambled isomers. Given that these intermediates act as kinetic traps during the oxidative folding, their accumulation is prevented when they are destabilized, thus leading to a significant acceleration of the folding kinetics. III-A and III-B forms appear to have both native disulfides bonds and free thiols similarly protected from the solvent; major structural rearrangements through the formation of scrambled isomers are required to render native LCI. The reductive unfolding pathway of LCI undergoes an apparent all-or-none mechanism, although low amounts of intermediates III-A and III-B can be detected, suggesting differences in protection against reduction among the disulfide bonds. The characterization of III-A and III-B forms shows that the former intermediate structurally and functionally resembles native LCI, whereas the III-B form bears more resemblance to scrambled isomers.     

A major kinetic trap for the oxidative folding of human epidermal growth factor

The folding pathway of human epidermal growth factor (EGF) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. Oxidative folding of the fully reduced EGF proceeds through 1-disulfide intermediates and accumulates rapidly as a single stable 2-disulfide intermediate (designated as EGF-II), which represents up to more than 85% of the total protein along the folding pathway. Among the five 1-disulfide intermediates that have been structurally characterized, only one is native, and nearly all of them are bridges by neighboring cysteines. Extensive accumulation of EGF-II indicates that it accounts for the major kinetic trap of EGF folding. EGF-II contains two of the three native disulfide bonds of EGF, Cys(14)-Cys(31) and Cys(33)-Cys(42). However, formation of the third native disulfide (Cys(6)-Cys(20)) for EGF-II is slow and does not occur directly. Kinetic analysis reveals that an important route for EGF-II to reach the native structure is via rearrangement pathway through 3-disulfide scrambled isomers. The pathway of EGF-II to attain the native structure differs from that of three major 2-disulfide intermediates of bovine pancreatic trypsin inhibitor (BPTI). The dissimilarities of folding mechanism(s) between EGF, BPTI, and hirudin are discussed in this paper.     

Major kinetic traps for the oxidative folding of leech carboxypeptidase inhibitor

The leech carboxypeptidase inhibitor (LCI) is a 66-amino acid protein, containing four disulfides that stabilize its structure. This polypeptide represents an excellent model for the study and understanding of the diversity of folding pathways in small, cysteine-rich proteins. The pathway of oxidative folding of LCI has been elucidated in this work, using structural and kinetic analysis of the folding intermediates trapped by acid quenching. Reduced and denatured LCI refolds through a rapid, sequential flow of one- and two-disulfide intermediates and reaches a rate-limiting step in which a mixture of three major three-disulfide species and a heterogeneous population of non-native four-disulfide (scrambled) isomers coexist. The three three-disulfide intermediates have been identified as major kinetic traps along the folding pathway of LCI, and their disulfide structures have been elucidated in this work. Two of them contain only native disulfide pairings, and one contains one native and two non-native disulfide bonds. The coexistence of three-disulfide kinetic traps adopting native disulfide bonds together with a significant proportion of fully oxidized scrambled isomers shows that the folding pathway of LCI features properties exhibited by both the bovine pancreatic trypsin inhibitor and hirudin, two diverse models with extreme folding characteristics. The results further demonstrate the large diversity of disulfide folding pathways.     

Rate enhancement of the oxidative folding of lysozyme by the use of aromatic thiol containing redox buffers

Almost all therapeutic proteins and most extracellular proteins contain disulfide bonds. The production of these proteins in bacteria or in vitro is challenging due to the need to form the correctly matched disulfide bonds during folding. One important parameter for efficient in vitro folding is the composition of the redox buffer, a mixture of a small molecule thiol and small molecule disulfide. The effects of different redox buffers on protein folding, however, have received limited attention. The oxidative folding of denatured reduced lysozyme was followed in the presence of redox buffers containing varying concentrations of five different aromatic thiols or the traditional aliphatic thiol glutathione (GSH). Aromatic thiols eliminated the lag phase at low disulfide concentrations, increased the folding rate constant up to 11-fold, and improved the yield of active protein relative to GSH. The yield of active protein was similar for four of the five aromatic thiols and for glutathione at pH 7 as well as for glutathione at pH 8.2. At pH 6 the positively charged aromatic thiol provided a higher yield than the negatively charged thiols.     

A 3-disulfide mutant of mouse prion protein expression, oxidative folding, reductive unfolding, conformational stability, aggregation and isomerization

The structure of wild-type mouse prion protein mPrP(23-231) consists of two distinctive segments with approximately equal size, a disordered and flexible N-terminal domain encompassing residues 23-124 and a largely structured C-terminal domain containing about 40% of helical structure and stabilized by one disulfide bond (Cys(178)-Cys(213)). We have expressed a mPrP mutant with 4 Ala/Ser-->Cys replacements, two each at the N-(Cys(36), Cys(112)) and C-(Cys(134), Cys(169)) domains. Our specific aims are to study the interaction between N- and C-domains of mPrP during the oxidative folding and to produce stabilized isomers of mPrP for further analysis. Oxidative folding of fully reduced mutant, mPrP(6C), generates one predominant 3-disulfide isomer, designated as N-mPrP(3SS), which comprises the native disulfide (Cys(178)-Cys(213)) and two non-native disulfide bonds (Cys(36)-Cys(134) and Cys(112)-Cys(169)) that covalently connect the N- and C-domains. In comparison to wild-type mPrP(23-231), N-mPrP(3SS) exhibits an indistinguishable CD spectra, a similar conformational stability in the absence of thiol and a reduced ability to aggregate. In the presence of thiol catalyst and denaturant, N-mPrP(3SS) unfolds and generates diverse isomers that are amenable to further isolation, structural and functional analysis.     

Pathway of Oxidative Folding of a 3-Disulfide α-Lactalbumin May Resemble Either BPTI Model or Hirudin Model

Pathways of oxidative folding of disulfide proteins display a high degree of diversity and vary among two extreme models. The BPTI model is defined by limited species of folding intermediates adopting mainly native disulfide bonds. The hirudin model is characterized by highly heterogeneous folding intermediates containing mostly non-native disulfide bonds. αLA-IIIA is a 3-disulfide variant of α-lactalbumin (αLA) with a 3-D conformation essentially identical to that of intact αLA. αLA-IIIA contains 3 native disulfide bonds of αLA, two of them are located at the calcium binding β-subdomain (Cys⁶¹–Cys⁷⁷ and Cys⁷³–Cys⁹¹) and the third bridge is located within the α-helical domain of the molecule (Cys²⁸–Cys¹¹¹). We investigate here the pathway of oxidative folding of fully reduced αLA-IIIA with and without stabilization of its β-subdomain by calcium binding. In the absence of calcium, the folding pathway of αLA-IIIA was shown to resemble that of hirudin model. Upon stabilization of β-sheet domain by calcium binding, the folding pathway of αLA-IIIA exhibits a striking similarity to that of BPTI model. Three predominant folding intermediates of αLA-IIIA containing exclusively native disulfide bonds were isolated and structurally characterized. Our results further demonstrate that stabilization of subdomains in a protein may dictate its folding pathway and represent a major cause for the existing diversity in the folding pathways of the disulfide-containing proteins.     

蛋白质的氧化重折叠

经过近几十年来广泛而深入的研究,蛋白质氧化重折叠的机制已得到相当详细的阐明。1在已研究过的蛋白质中,大多数蛋白质都是沿着多途径而非单一、特定的途径进行氧化重折叠,这与折叠能量景观学说是一致的。2正是氨基酸残基间的天然相互作用而不是非天然的相互作用控制蛋白质的折叠过程。这一结论与含非天然二硫键的折叠中间体在牛胰蛋白酶抑制剂（BPTI）折叠中所起的重要作用并非相互排斥,因为后者仅仅是进行链内二硫键重排的化学反应所必需,与控制肽链折叠无直接关系。3根据对BPTI的研究,二硫键曾被认为仅仅具有稳定蛋白质天然结构的作用,既不决定折叠途径也不决定其三维构象。这一观点不适用于其它蛋白质。对凝乳酶原的研究表明,天然二硫键的形成是恢复天然构象的前提。天然二硫键的形成与肽键的正确折叠相辅相成,更具有普遍意义。4在氧化重折叠的早期,二硫键的形成基本上是一个随机过程,随着肽链的折叠二硫键的形成越来越受折叠中间体构象的限制。提高重组蛋白质的复性产率是生物技术领域中的一个巨大的挑战。除了分子聚集外,在折叠过程中所形成的二硫键错配分子是导致低复性率的另一个主要原因。氧化重折叠机制的阐明为解决此问题提供了有益的启示。如上所述,在折叠的后期,二硫键的形成决定于折叠中间体的构象,类天然、有柔性的结构有利于天然二硫键形成和正确折叠,具有这类结构的分子为有效的折叠中间体,最终都能转变为天然产物;而无效折叠中间体往往具有稳定的结构,使巯基、二硫键内埋妨碍二硫键重排,并因能垒的障碍不利于进一步折叠。因此,降低无效折叠中间体的稳定性使之转变为有效折叠中间体是提高含二硫键蛋白质复性率的一条基本原则,实验证明,碱性pH、低温、降低蛋白质稳定性的试剂、蛋白质二硫键异构酶、改变蛋白质一级结构是实现这一原则的有效手段。此外,这里还就氧化重折叠的基础和应用研究的前景进行了讨论。     

A Pro to His mutation in active site of thioredoxin increases its disulfide-isomerase activity 10-fold. New refolding systems for reduced or randomly oxidized ribonuclease.

Thioredoxin (Trx) from Escherichia coli was compared with bovine protein disulfide-isomerase (PDI) for its ability to catalyze native disulfide formation in either reduced or randomly oxidized (scrambled) ribonuclease A (RNase). On a molar basis, a 100-fold higher concentration of Trx than of PDI was required to give the same rate of native disulfide formation measured as recovery of RNase activity. A Pro-34 to His (P34H Trx) mutation in the active site of E. coli Trx (WCGPC), mimicking the two suggested active sites in PDI (WCGHC), increased the catalytic activity in disulfide formation about 10-fold. The mutant P34H Trx displayed a 35-mV higher redox potential (E'0) of the active site disulfide/dithiol relative to wild type Trx, making it more similar to the redox potential observed for PDI. This higher redox potential correlates well with the enhanced activity and suggests a role for the histidine side chain. Enzymatic isomerization of disulfides in scrambled, oxidized RNase requires the presence of a catalytic thiol such as GSH to initiate the thiol-disulfide interchange. Bovine thioredoxin reductase, together with NADPH, could replace GSH. For oxidative folding of reduced RNase in air with Trx, P34H Trx, or PDI, catalytic amounts of sodium selenite (1 microM) resulted in rapid disulfide formation and high yields of ribonuclease activity equivalent to previously known redox buffers of GSH and GSSG. These results demonstrate no obligatory role for glutathione in disulfide formation. A possible mechanism for the unknown thiol oxidative process accompanying folding and protein disulfide formation in vivo is discussed.     

Evidence for the underlying cause of diversity of the disulfide folding pathway

The pathways of oxidative folding of disulfide proteins exhibit a high degree of diversity, which is illustrated by the varied extent of (a) the heterogeneity of folding intermediates, (b) the predominance of intermediates containing native disulfide bonds, and (c) the level of accumulation of fully oxidized scrambled isomers as intermediates. BPTI and hirudin exemplify two extreme cases of such divergent folding pathways. We previously proposed that the underlying cause of this diversity is associated with the degree of stability of protein subdomains. Here we present compelling evidence that substantiates this hypothesis by studying the folding pathway of alphaLA-IIA. alphaLA-IIA is a partially folded intermediate of alpha-lactalbumin (alphaLA). It comprises a structured beta-sheet (calcium-binding) domain linked by two native disulfide bonds (Cys(61)-Cys(77) and Cys(73)-Cys(91)) and a disordered alpha-helical domain with four free cysteines (Cys(6), Cys(28), Cys(111), and Cys(120)). Purified alphaLA-IIA was allowed to refold without and with stabilization of its structured beta-sheet domain by calcium. In the absence of calcium, the folding pathway of alphaLA-IIA resembles that of hirudin, displaying a highly heterogeneous population of folding intermediates, including fully oxidized scrambled species. Upon stabilization of its beta-sheet domain by bound calcium, oxidative folding of alphaLA-IIA undergoes a pathway conspicuously similar to that of BPTI, exhibiting limited species of folding intermediates containing mostly native disulfide bonds.     

Disulfide exchange folding of insulin-like growth factor I.

The disulfide exchange folding properties of insulin-like growth factor I (IGF-I) have been analyzed in a redox buffer containing reduced (10 mM) and oxidized (1 mM) glutathione. Under these conditions, the 3 disulfide bridges of the 70 amino acid peptide were not quantitatively formed. Instead, five major forms of IGF-I were detected, and these components were concluded to be in equilibrium as their relative amounts were similar starting from either reduced, native, or a mismatched variant of IGF-I containing two non-native disulfides. The different components in the mixtures were trapped by thiol alkylation using vinylpyridine and subsequently isolated by reverse-phase HPLC. The purified variants were further characterized using plasma desorption mass spectrometry and peptide mapping. Two of the five different forms were identified as native and mismatched IGF-I. One form was a variant with only one disulfide bond, and the other two major components had two disulfides formed. In a separate experiment, early refolding intermediates were trapped by pyridylethylation after only 90 s of refolding in the glutathione buffer, starting from reduced IGF-I. The intermediates were identical to the components observed at equilibrium, but at different relative concentrations. On the basis of the disulfide bond patterns of the different components in the equilibrium mixtures, we conclude that the disulfide between cysteines-47 and -52 in IGF-I is an unfavorable high-energy bond that may exist in the native molecule in a strained configuration.     

The folding pathway of alpha-lactalbumin elucidated by the technique of disulfide scrambling. Isolation of on-pathway and off-pathway intermediates

The technique of disulfide scrambling permits reversible conversion of the native and denatured (scrambled) proteins via shuffling and reshuffling of disulfide bonds. Under strong denaturing conditions (e.g. 6 m guanidinium chloride) and in the presence of a thiol initiator, alpha-lactalbumin (alphaLA) denatures by shuffling its four native disulfide bonds and converts to an assembly of 45 species of scrambled isomers. Among them, two predominant isomers, designated as X-alphaLA-a and X-alphaLA-d, account for about 50% of the total denatured structure of alphaLA. X-alphaLA-a and X-alphaLA-d, which adopt the disulfide patterns of (1-2,3-4,5-6,7-8) and (1-2,3-6,4-5,7-8), respectively, represent the most unfolded structures among the 104 possible scrambled isomers (Chang, J.-Y., and Li, L. (2001) J. Biol. Chem. 276, 9705-9712). In this study, X-alphaLA-a and X-alphaLA-d were purified and allowed to refold through disulfide scrambling to form the native alphaLA. Folding intermediates were trapped kinetically by acid quenching and analyzed quantitatively by reversed phase high pressure liquid chromatography. The results revealed two major on-pathway productive intermediates, two major off-pathway kinetic traps, and at least 30 additional minor transient intermediates. Of the two major on-pathway intermediates, one takes on a native-like alpha-helical domain, and the other comprises a structured beta-sheet, calcium binding domain. The two major kinetic traps are apparently stabilized by locally formed non-native-like structures. Overall, the folding mechanism of alphaLA is essentially congruent with the model of "folding funnel" furnished with a rather intricate energy landscape.     

Shifting the competition between the intramolecular Reshuffling reaction and the direct oxidation reaction during the oxidative folding of kinetically trapped disulfide-insecure intermediates

The oxidative folding pathway(s) of single-domain proteins can be characterized by the existence, stability, and structural nature of the intermediates that populate the regeneration pathway. Structured intermediates can be disulfide-secure in that they are able to protect their existing (native) disulfide bonds from SH/SS reshuffling and reduction reactions, and thereby form the native protein directly, i.e., by oxidation of their exposed (or locally exposable) thiols. Alternatively, they can be disulfide-insecure, usually requiring global unfolding to expose their free thiols. However, such an unfolding event also exposes the existing native disulfide bonds. Thus, the subsequent oxidation reaction to form the native protein in a disulfide-insecure intermediate competes with the intramolecular attack by the thiols of the macromolecule on its own native disulfide bonds, resulting in a large population of intermediates that are reshuffled instead of being oxidized. Under stabilizing conditions, disulfide-insecure species become long-lived kinetically trapped intermediates that slowly and only indirectly convert to the native protein through reshuffling reactions. In this study, trans-[Pt(en)(2)Cl(2)](2+), a strong oxidizing agent which has not traditionally been used in oxidative folding, was applied to shift the competition between reshuffling and oxidation reactions in des [58-110] and des [26-84], two long-lived disulfide-insecure intermediates of RNase A, and oxidize them directly under stable conditions to form the native protein. Such a successful direct conversion of kinetically trapped intermediates to the native molecule by trans-[Pt(en)(2)Cl(2)](2+) may be helpful in facilitating the oxidative folding processes of multi-disulfide-containing proteins in general.     

The oxidative refolding of hen lysozyme and its catalysis by protein disulfide isomerase.

The oxidative refolding of hen lysozyme has been studied by a variety of time-resolved biophysical methods in conjunction with analysis of folding intermediates using reverse-phase HPLC. In order to achieve this, refolding conditions were designed to reduce aggregation during the early stages of the folding reaction. A complex ensemble of relatively unstructured intermediates with on average two disulfide bonds is formed rapidly from the fully reduced protein after initiation of folding. Following structural collapse, the majority of molecules slowly form the four-disulfide-containing fully native protein via rearrangement of a highly native-like, kinetically trapped intermediate, des-[76-94], although a significant population (approximately 30%) appears to fold more quickly via other three-disulfide intermediates. The folding catalyst PDI increases dramatically both yields and rates of lysozyme refolding, largely by facilitating the conversion of des-[76-94] to the native state. This suggests that acceleration of the folding rate may be an important factor in avoiding aggregation in the intracellular environment.     

Study of a major intermediate in the oxidative folding of leech carboxypeptidase inhibitor: contribution of the fourth disulfide bond

The oxidative folding pathway of leech carboxypeptidase inhibitor (LCI; four disulfide bonds) proceeds through the formation of two major intermediates (III-A and III-B) that contain three native disulfide bonds and act as strong kinetic traps in the folding process. The III-B intermediate lacks the Cys19-Cys43 disulfide bond that links the beta-sheet core with the alpha-helix in wild-type LCI. Here, an analog of this intermediate was constructed by replacing Cys19 and Cys43 with alanine residues. Its oxidative folding follows a rapid sequential flow through one, two, and three disulfide species to reach the native form; the low accumulation of two disulfide intermediates and three disulfide (scrambled) isomers accounts for a highly efficient reaction. The three-dimensional structure of this analog, alone and in complex with carboxypeptidase A (CPA), was determined by X-ray crystallography at 2.2A resolution. Its overall structure is very similar to that of wild-type LCI, although the residues in the region adjacent to the mutation sites show an increased flexibility, which is strongly reduced upon binding to CPA. The structure of the complex also demonstrates that the analog and the wild-type LCI bind to the enzyme in the same manner, as expected by their inhibitory capabilities, which were similar for all enzymes tested. Equilibrium unfolding experiments showed that this mutant is destabilized by approximately 1.5 kcal mol(-1) (40%) relative to the wild-type protein. Together, the data indicate that the fourth disulfide bond provides LCI with both high stability and structural specificity.     

Aromatic thiol pKa effects on the folding rate of a disulfide containing protein

The production of proteins via recombinant DNA technology often requires the in vitro folding of inclusion bodies, which are protein aggregates. To create a more efficient redox buffer for the in vitro folding of disulfide containing proteins, aromatic thiols were investigated for their ability to increase the folding rate of scrambled RNase A. Scrambled RNase A is fully oxidized RNase A with a relatively random distribution of disulfide bonds. The importance of the thiol pK(a) value was investigated by the analysis of five para-substituted aromatic thiols with pK(a) values ranging from 5.2 to 6.6. Folding was measured at pH 6.0 where the pK(a) value of the thiols would be higher, lower, or equal to the solution pH. Thus, relative concentrations of thiol and thiolate would vary across the series. At pH 6.0, the aromatic thiols increased the folding rate of RNase A by a factor of 10-23 over that observed for glutathione, the standard additive. Under optimal conditions, the apparent rate constant increased as the thiol pK(a) value decreased. Optimal conditions occurred when the concentration of protonated thiol in solution was approximately 2 mM, although the total thiol concentration varied considerably. The importance of the concentration of protonated thiol in solution can be understood based on equilibrium effects. Kinetic studies suggest that the redox buffer participates as the nucleophile and/or the center thiol in the key rate determining thiol disulfide interchange reactions that occur during protein folding. Aromatic thiols proved to be kinetically faster and more versatile than classical aliphatic thiol redox buffers.     

Characterizing the tick carboxypeptidase inhibitor: molecular basis for its two-domain nature

Tick carboxypeptidase inhibitor (TCI) is a small, disulfide-rich protein that selectively inhibits metallocarboxypeptidases and strongly accelerates the fibrinolysis of blood clots. TCI consists of two domains that are structurally very similar, each containing three disulfide bonds arranged in an almost identical fashion. The oxidative folding and reductive unfolding pathways of TCI and its separated domains have been characterized by kinetic and structural analysis of the acid-trapped folding intermediates. TCI folding proceeds through a sequential formation of 1-, 2-, 3-, 4-, 5-, and 6-disulfide species to reach the native form. Folding intermediates of TCI comprise two predominant 3-disulfide species (named IIIa and IIIb) and a major 6-disulfide scrambled isomer (Xa) that consecutively accumulate along the reaction and are strongly prevented by the presence of protein disulfide isomerase. This study demonstrates that IIIa and IIIb are 3-disulfide species containing the native disulfide pairings of the N- and C-terminal domains of TCI, respectively, and explains why the two domains of TCI fold sequentially and independently. Also, we show that the reductive unfolding of TCI undergoes two main independent unfolding events through the formation of IIIa and IIIb intermediates. Together, the comparison of the folding, stability, and inhibitory activity of TCI with those of the isolated domains reveals the reasons behind the two-domain nature of this protein: both domains contribute to the specificity and high affinity of its double-headed binding to carboxypeptidases. The results obtained herein provide valuable information for the design of more potent and selective TCI molecules.     

Oxidative protein folding in vitro: a study of the cooperation between quiescin-sulfhydryl oxidase and protein disulfide isomerase

The flavin-dependent quiescin-sulfhydryl oxidase (QSOX) inserts disulfide bridges into unfolded reduced proteins with the reduction of molecular oxygen to form hydrogen peroxide. This work investigates how QSOX and protein disulfide isomerase (PDI) cooperate in vitro to generate native pairings in two unfolded reduced proteins: ribonuclease A (RNase, four disulfide bonds and 105 disulfide isomers of the fully oxidized protein) and avian riboflavin binding protein (RfBP, nine disulfide bonds and more than 34 million corresponding disulfide pairings). Experiments combining avian or human QSOX with up to 200 muM avian or human reduced PDI show that the isomerase is not a significant substrate of QSOX. Both reduced RNase and RfBP can be efficiently refolded in an aerobic solution containing micromolar concentrations of reduced PDI and nanomolar levels of QSOX without any added oxidized PDI or glutathione redox buffer. Refolding of RfBP is followed continuously using the complete quenching of the fluorescence of free riboflavin that occurs on binding to apo-RfBP. The rate of refolding is half-maximal at 30 muM reduced PDI when the reduced client protein (1 muM) is used in the presence of 30 nM QSOX. The use of high concentrations of PDI, in considerable excess over the folding protein client, reflects the concentration prevailing in the lumen of the endoplasmic reticulum and allows the redox poise of these in vitro experiments to be set with oxidized and reduced PDI. In the absence of either QSOX or redox buffer, the fastest refolding of RfBP is accomplished with excess reduced PDI and just enough oxidized PDI to generate nine disulfides in the protein client. These in vitro experiments are discussed in terms of current models for oxidative folding in the endoplasmic reticulum.     

Catalysis of the oxidative folding of ribonuclease A by protein disulfide isomerase: pre-steady-state kinetics and the utilization of the oxidizing equivalents of the isomerase

At low concentrations of a glutathione redox buffer, the protein disulfide isomerase (PDI) catalyzed oxidative renaturation of reduced ribonuclease A exhibits a rapid but incomplete activation of ribonuclease, which precedes the steady-state reaction. This behavior can be attributed to a GSSG-dependent partitioning of the substrate, reduced ribonuclease, between two classes of thiol/disulfide redox forms, those that can be converted to active ribonuclease at low concentrations of GSH and those that cannot. With catalytic concentrations of PDI and near stoichiometric concentrations of glutathione disulfide, approximately 4 equiv (2 equiv of ribonuclease disulfide) of GSH are formed very rapidly followed by a slower formation of GSH, which corresponds to an additional 2 disulfide bond equiv. The rapid formation of RNase disulfide bonds and the subsequent rearrangement of incorrect disulfide isomers to active RNase are both catalyzed by PDI. In the absence of GSSG or other oxidants, disulfide bond equivalents of PDI can be used to form disulfide bonds in RNase in a stoichiometric reaction. In the absence of a glutathione redox buffer, the rate of reduced ribonuclease regeneration increases markedly with increasing PDI concentrations below the equivalence point; however, PDI in excess over stoichiometric concentrations inhibits RNase regeneration.