Storage and release of solutes and microalgae from water-in-oil emulsions stabilized by silica nanoparticles

Water-in-oil (W/O) emulsions using crop oils and stabilized by surface modified silica nanoparticles and polymeric surfactants appear to be a promising approach for storing and delivering microorganisms to aqueous environments. In these systems cells are contained within the internal phase of the emulsion. We examined two types of silica nanoparticles for stabilizing Chlorella vulgaris in W/O emulsions and release kinetics upon delivery to water. C. vulgaris was selected because of its potential for nutritional and industrial applications. We also examined the effects of silica nanoparticles on the release of a model solute NaCl. Surface modification of the nanoparticles and concentration of nanoparticles in the continuous phase had significant effects on the release of NaCl while only surface modification had an effect on the release of cells. Increasing the hydrophobicity of the nanoparticles significantly reduced the level of cell release and rate of solute release suggesting emulsion properties could be tailored to achieve the controlled release of cells and solute upon delivery.     

Water-in-oil emulsions that improve the storage and delivery of the biolarvacide <Emphasis Type="Italic">Lagenidium giganteum</Emphasis>

Lagenidium giganteum is an effective biological control agent for mosquitoes with limited use due to poor survival and contamination during storage. Invert (water-in-oil) emulsions using crop oils were investigated for formulating L. giganteum mycelium for improved shelf life and delivery. Cells formulated in a water-in-oil (W/O) emulsion were just as effective against larvae as those formulated in aqueous suspension. Cells formulated in the W/O emulsion and cell suspension settled during storage and formed clumps, which significantly reduced the efficacy of formulations. Hydrophobic silica nanoparticles were added to the W/O emulsion formulation for oil thickening. The addition of silica significantly reduced cell sedimentation and improved storage; thickened W/O emulsions with an initial cell density of 3900 CFU/mg applied at 0.5 mg/cm² were greater than 95% effective at infecting mosquitoes after 12 weeks of storage at room temperature. Cell density reduction during storage was represented using first-order kinetics. Surface treatment of silica nanoparticles and oil refinement both had a significant effect on the first-order rate constant; as the hydrophobicity of the silica increased and level of oil refinement decreased, the rate constant increased. The percentage of water in the W/O emulsion and type of refined crop oil had no significant effect on the first-order rate constant. Cells formulated in the thickened W/O emulsion were less likely to settle when applied to water compared to cells in aqueous suspension, suggesting better cell distribution in an aqueous environment could be achieved when cells are applied in a W/O emulsion.     

Preparation and Characterization of Water-in-Oil-in-Water Emulsions Containing a High Concentration of L-Ascorbic Acid

This study sought to encapsulate a high concentration of L-ascorbic acid, up to 30% (w/v), in the inner aqueous phase of water-in-oil-water (W/O/W) emulsions with soybean oil as the oil phase. Two-step homogenization was conducted to prepare W/O/W emulsions stabilized by a hydrophobic emulsifier and 30% (v/v) of W/O droplets stabilized by a hydrophilic emulsifier. First-step homogenization prepared W/O emulsions with an average aqueous droplet diameter of 2.0 to 3.0 μm. Second-step homogenization prepared W/O/W emulsions with an average W/O droplet diameter of 14 to 18 μm and coefficients of variation (CVs) of 18% to 25%. The results indicated that stable W/O/W emulsions containing a high concentration of L-ascorbic acid were obtained by adding gelatin and magnesium sulfate in the inner aqueous phase and glucose in both aqueous phases. L-Ascorbic acid retention in the W/O/W emulsions was 40% on day 30 and followed first-order kinetics.     

Impact of Electrostatic Interactions on Lecithin-Stabilized Model O/W Emulsions

Natural emulsifiers, particularly those extracted from plants, are highly wanted by food industry to meet consumers demand for clean label food and beverage products. The potential utilization of soy lecithin as an emulsifier in model coffee creamer was investigated in this study. The model oil-in-water (O/W) emulsions consisted of 10 wt% medium chain triglyceride were stabilized using either 1% or 5% soy lecithin (pH 7.0). The O/W emulsions were of whitish milky color (L*?=?88–92) and were able to whiten black coffee solutions (L* from 5.5 for black coffee to 44–56 for white coffees). Model O/W emulsions with smaller mean droplet diameters (0.11 to 1.09 μm), higher surface potentials (ζ?=??62 to ?72 mV), and better stabilities in hot coffee were fabricated using higher lecithin levels because there was more emulsifier to coat the oil droplet surfaces. Alteration of the electrostatic interactions in the model O/W emulsions (5% lecithin) by pH adjustment or calcium addition led to droplet aggregation under certain conditions, which was attributed to charge reduction by protonation of lecithin head groups and electrostatic screening by counter-ion accumulation and ion-binding. In particular, phase separation of the model creamer occurred at pH value around 4.5 when the system was acidified at a slow rate. Overall, this study suggests that lecithin-stabilized O/W emulsions may become unstable in coffee solutions with high acidity or calcium levels. The information obtained from this study provides insights on the use of plant-based emulsifiers in commercial food and beverage systems.     

Rheological properties of a double emulsion nutraceutical system incorporating chia essential oil and ascorbic acid stabilized by carbohydrate polymer-protein blends

Four water-in-oil-in water (W₁/O/W₂) double emulsions were made by adding the primary emulsion (W₁/O) containing 74% (w/w) of chia essential oil, 6% (w/w) of ascorbic acid, and a 0.2 dispersed phase mass fraction (φW₁/O) to aqueous solutions (W₂) of mesquite gum (MG), maltodextrin DE-10 (MD) and whey protein concentrate (WPC) in different proportions (MG66-MD17-WPC17 and MG17-MD66-WPC17), and in a ratio of 1:2.12 and 1:4.12 W₁/O to dry biopolymers blends solids. All the double emulsions showed type C morphologies and only slight changes in the volume-weighted mean diameter (d_4,3) throughout the storage time, indicative of good stability, despite they presented bimodal size distributions, but the double emulsion formulated with a predominant proportion of MD and ratio 1:2.12 provided a higher stability against droplet coalescence. All the double emulsions displayed viscoelastic character dependent on frequency.     

Dispersion and oxidative stability of O/W emulsions and oxidation of microencapsulated oil

Oil-in-water (O/W) emulsions are among the dispersion systems commonly used in food, and these emulsions are in thermodynamically unstable or metastable states. In this paper, various methods for preparing O/W emulsions are outlined. Since the commodity value of food is impaired by the destabilization of O/W emulsions, experimental and theoretical approaches to assess the stability of O/W emulsions are overviewed, and factors affecting the dispersion stability of emulsions are discussed based on the DLVO theory and the concept of the stability factor. The oxidation of lipids in O/W emulsions is unhealthy and gives rise to unpleasant odors. Factors affecting the autoxidation of lipids are discussed, and theoretical models are used to demonstrate that a reduction of the oil droplet size suppresses or retards autoxidation. Microencapsulated lipids or oils exhibit distinct features in the oxidation process. Models that explain these features are described. It is demonstrated that a reduction in the oil droplet size is also effective for suppressing or retarding the oxidation of microencapsulated oils.     

Stability of CoQ10-Loaded Oil-in-Water (O/W) Emulsion: Effect of Carrier Oil and Emulsifier Type

Co-enzyme Q10 (CoQ10), a lipophilic compound that widely used in the food and pharmaceutical products was formulated in a κ-carrageenan coated oil-in-water (O/W) emulsion. In this work, we examined the solubility of CoQ10 in different carrier oils and effects of emulsifier type on the formation and stability of CoQ10-loaded O/W emulsion. Nine vegetable oils and four types of emulsifiers were used. CoQ10 was found significantly (p?<?0.05) more soluble in medium chain oils (coconut oil and palm kernel oil) as compared to other vegetable oils. The O/W emulsions were then prepared with 10 % (w/w) coconut oil and palm kernel oil containing 200 g CoQ10/L oil stabilized by 1 % (w/v) emulsifiers (sucrose laurate (SEL), sodium stearoyl lactate (SSL), polyglycerol ester (PE), or Tween 80 (Tw 80)) in 1 % (w/v) κ-carrageenan aqueous solution. Particle size distribution and physical stability of the emulsions were monitored. The droplet sizes (surface weighted mean diameter, D[3,2]) of fresh O/W emulsion in the range of 2.79 to 5.83 μm were observed. Irrespective of the oil used, results indicated that complexes of SSL/κ-carrageenan provided the most stable CoQ10-loaded O/W emulsion with smaller and narrower particle size distribution. Both macroscopic and microscopic observations showed that O/W emulsion stabilized by SSL/κ-carrageenan is the only emulsion that exhibited no sign of coalescence, flocculation, and phase separation throughout the storage period observed.     

Legume Protein Isolates for Stable Acidic Emulsions Prepared by Premix Membrane Emulsification

Proteins originating from dry legumes are not that much used in food formulations, yet, they are interesting components from a sustainability point of view, and could have interesting functional properties, e.g. for emulsion preparation. Therefore, this work focuses on the potential of the water soluble part of pea, chickpea and lentil protein isolates under acidic emulsions (pH 3.0) using a novel mild technique: premix membrane emulsification. Pea proteins (PP) and chickpea proteins (CP) lower the interfacial tension in the same way as whey protein isolate (WPI), which suggests that they could facilitate emulsion droplet formation similarly as WPI, while lentil proteins (LP) are slightly less effective. It is possible to make oil-in-water (O/W) emulsions with an average droplet diameter (d _4,3 ) of ~5 μm after 5 cycles in the premix system. The droplet size distribution of the emulsions remained constant during one day of storage, indicating that legume proteins are able to form and kinetically stabilize O/W emulsions. CP and PP exhibited emulsifying properties comparable to those of WPI, whereas LP is slightly less efficient, therewith indicating the great potential and that pea and chickpea protein isolates hold as emulsifiers in acidic food formulations.     

Encapsulation of Lipophilic Bioactive Molecules by Microchannel Emulsification

Currently, much effort is being invested in novel formulations of bioactive molecules, such as emulsions, for pharmaceutical, food, and cosmetic applications. Therefore, methods to produce emulsions with controlled-size droplets of uniform size distribution have been developed. On this concern, a microfluidic device called the microchannel (MC) was used in this work for emulsification. This is a novel method for producing monodispersed emulsion droplets with very narrow droplet size distribution and low energy input, due to the spontaneous droplet generation basically driven by the interfacial tension, unlike other conventional emulsification processes. This technology provides the formulation of oil-in-water (O/W) emulsions containing lipophilic active molecules with increased bioavailability, which may be readily absorbed by the human body. MC emulsification enables the preparation of highly monodispersed O/W emulsions, which may be applied as enhancer on active molecules delivery systems, as well as in foodstuff. In this study, formulations of O/W emulsions loaded with bioactive molecules, such as β-carotene and γ-oryzanol, were prepared by the MC emulsification process. Refined soybean oil containing the dissolved lipophilic molecule and either sugar ester or gelatin solution (1 wt.%) were used as the dispersed and continuous phases, respectively. The emulsification process conducted using the asymmetric straight-through MC plate enabled the production of monodispersed O/W emulsions, resulting in β-carotene-loaded O/W emulsions with average droplet size (d _av) of 27.6 μm and coefficient of variation (CV) of 2.3% and γ-oryzanol-loaded droplets with d _av of 28.8 μm and CV of 3.8%. The highly monodisperse β-carotene-loaded droplets were physically stable throughout the storage period observed, resulting in droplets with d _av 28.2 μm and CV of 2.9% after 4 months storage in darkness at 5 °C. Single micrometer-sized monodisperse emulsions loaded with β-carotene were successfully formulated using the grooved MC emulsification, resulting in droplets with d _av of 9.1 μm and CV of 6.2%. This work was funded by The Ministry of Agriculture, Forestry and Fisheries of Japan, through the Food Nanotechnology Project, and the Japan Society for the Promotion of Science.     

A novel fiber-optic photometer for in situ stability assessment of concentrated oil-in-water emulsions

The purpose of this research was to evaluate a novel fiberoptic photometer for its ability to monitor physical instabilities occurring in concentrated emulsions during storage. For this, the fiber-optic photometer was used to measure transmission of oil-in-water emulsions stabilized with hypromellose (HPMC) as a function of oil volume fraction and droplet size distribution (DSD). To detect physical instabilities like creaming and coalescence, the transmissivity of the samples was studied at 2 different hight levels over a certain period of time. The corresponding droplet size distributions were determined by laser diffraction with PIDS. Transmissivity was found to depend on the number of dispersed droplets and thus is sensitive to both the variation of phase volume fraction as well as the emulsions droplet size distribution. At constant DSD, light transmission decreased linearly with increasing oil content within a large interval of phase volume fractions from 0.01 to 0.3. At constant phase volume fraction, an increase in droplet size increased light transmission. Investigation of creaming on emulsions with different droplet size distributions showed changes in the initial delay times and creaming velocities. In contrast to creaming phenomenon coalescence can be identified by height independent changes of the transmissivity. In conclusion, transmissivity of oil-in-water emulsions observed by the novel fiber-optic photometer is sensitive to phase volume fraction, droplet size distribution, and thus can be used as a tool for stability studies on concentrated emulsions. Published: August 31, 2007     

Hydrophobically modified alginate for emulsion of oil in water

Dodecanol was covalently coupled to sodium alginate (NaAlg) via ester functions using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC-HCl) as a coupling reagent to provide an amphiphilic dodecanol alginate (DA) for subsequent use in oil-in-water (O/W) emulsion application. The structure of DA was confirmed by FT-IR spectrometry. The stability of the emulsions prepared with different concentrations (0.3-1.2 wt%) of DA or 1.0 wt% NaAlg was evaluated by measuring droplet size, microstructure, viscosity and creaming. The results showed that the emulsions containing 1.0 wt% NaAlg, 0.3 and 0.5 wt% DA were unstable and the emulsions containing 0.8-1.2 wt% DA presented better stability during storage.     

Structure-Function Relationships in Pectin Emulsification

The emulsifying characteristics of pectins isolated from six different okra genotypes were investigated and their structure-function relationships have been evaluated. Emulsion formation and stabilization of acidic oil-in-water emulsions (pH 2.0, φ?=?0.1) were studied by means of droplet size distribution, ζ-potential measurements, viscometry, interfacial composition analysis and fluorescence microscopy. Fresh and aged emulsions differed in terms of droplet size distribution, interfacial protein and pectin concentrations (Γ) depending on the molecular properties of pectin that was used. Specifically, pectins with intermediate length of RG-I branching with molar ratio of (Ara?+?Gal)/Rha between 2 and 3 exhibit the optimum emulsification capacity whereas samples with the molar ratio outside this range do not favour emulsification. Additionally, low amounts of RG-I segments (HG/RG-I?>?2) improve long term stability of emulsions as opposed to the samples that contain high amounts of RG-I (HG/RG-I?<?2) which lead to long term instability. Protein was not found to be the controlling factor for the stability of the dispersions. The present results show that rational design of pectin should be sought before application as functional ingredient in food and/or pharmaceutical systems.     

Stability of Emulsions Using a New Natural Emulsifier: Sugar Beet Extract <Emphasis Type="Italic">(Beta vulgaris L.)</Emphasis>

This study describes the influence of environmental stresses on the stability of emulsions prepared by a natural sugar beet extract (Beta vulgaris L.). The emulsion stabilizing performance was compared to that of Quillaja extract, which is widely used within the food and beverage industry as natural surfactant. We investigated the influence of pH, ionic strength, heating and freeze-thawing on the mean particle size, ζ-potential and microstructure of oil-in-water emulsions (10% w/w oil, 0.75% w/w emulsifier). The emulsions stabilized by the anionic sugar beet extract were stable at pH 5–8 and against thermal treatments up to 60 °C. However, the prepared emulsions were unstable at acidic (pH 2–4) and basic pH conditions (pH 9), at high temperature (>60 °C), and at salt additions (> 0.1 M NaCl / CaCl₂). Moreover, they also phase separated upon freeze-thawing. Our results show that sugar beet extract is capable of stabilizing emulsions and may therefore be suitable as natural emulsifier for selected applications in the food and beverage industry.     

Formation and Stability of ω-3 Oil Emulsion-Based Delivery Systems Using Plant Proteins as Emulsifiers: Lentil,Pea, and Faba Bean Proteins

Many sectors of the food industry are interested in replacing synthetic or animal-based ingredients with plant-based alternatives to create products that are more natural, environmentally friendly, and sustainable. In this study, the ability of several plant protein concentrates to act as natural emulsifiers in oil-in-water emulsions fortified with omega-3 fatty acids was investigated. The impact of emulsifier type on the formation and stability of the emulsions was determined by measuring changes in droplet characteristics (size and charge) under different homogenization, pH, salt, and temperature conditions. Pea (Pisum sativum), lentil (Lens culinaris) and faba bean (Vicia faba) protein concentrates all proved to be effective emulsifiers for forming and stabilizing 10 wt% algae oil-in-water emulsions produced by high-pressure homogenization. The droplet size decreased with increasing emulsifier concentration, and relatively small oil droplets (d < 0.3 μm) could be formed at higher emulsifier levels (5% protein). Lentil protein-coated droplets were the most stable to environmental stresses such as pH, ionic strength and temperature changes. These results have important implications for the production of functional foods and beverages from natural plant-based ingredients.     

Effect of temperature,pH and ionic strength on hydroxyapatite stabilised Pickering emulsions produced in batch and continuous mode

Oil-in-water (O/W) Pickering emulsions are attracting attention as carriers of lipophilic active compounds with clear advantages over traditional systems. Having in view their effective use it is important to study their stability against environmental stresses impacting manufacture, storage, and application conditions. In this work, hydroxyapatite nanoparticles (n-HAp) Pickering emulsions produced in continuous mode using a mesostructured reactor (average size?~?7, 11 and 18 µm) and in batch mode using a rotor–stator device (average size?~?18 µm) were studied concerning their behaviour at different temperatures (5–90 ºC), pH (2–10) and ionic strength (0–500 mM), conditions with relevance for food applications. Droplet size, morphology, and zeta-potential were analysed after 1 and 7 days under storage. In general, and despite the droplet size, the n-HAp Pickering emulsions were stable within the tested ionic strength range, at relatively high pH environments (6–10), and at temperatures up to 70 ºC. Pickering emulsions undergo complete phase separation at very low pH (2) due to n-HAp particle's disruption. A clear tendency to aggregation and coalescence was observed for high temperatures (70–90 ºC). Results indicate no significant differences related to the used production method. From an industrial perspective, this work also corroborates that the scale-up to a continuous process using a mesostructured reactor, NETmix, from a batch laboratorial process is feasible without impacting stability.

Graphical abstract

     

Double Emulsions Stabilized by Food Biopolymers

Double emulsions of the water-in-oil-in-water (W/O/W) type have application in the formulation of reduced-fat food products and as vehicles for encapsulation and delivery of nutrients during food digestion. Progress in the development of stable double emulsions for food use is dependent on replacing small-molecule emulsifiers and synthetic polymeric stabilizing agents by food-grade ingredients. Of particular value for conferring the required functionality are food proteins and polysaccharides. This review describes how these biopolymers have been successfully incorporated into the internal and external aqueous phases of W/O/W emulsions to improve the stability and yield of model systems. Recent advances in the use of protein–polysaccharide conjugates and complexes for the stabilization of the outer droplets of W/O/W emulsions are highlighted.     

Phase Transition Stability of Cocoa Butter Emulsions

The impact of tempering-crystallization on microstructure and stability of water-in-cocoa butter (w/o) emulsions was analyzed using differential scanning calorimetry (DSC). The type and volume fraction of the disperse phase, and cooling rate during DSC analysis were systematically varied. Freshly prepared emulsions were additionally characterized by microscopy and laser diffraction. Fresh cocoa butter emulsions were composed of small and well dispersed droplets of an average size of 2.24 μm and 1.96 μm for water and 50 % sucrose solution as disperse phase, respectively. The thermograms revealed that the dissolved sugar lowered freezing and melting temperature and, dependent on volume fraction, the dispersion in the oil phase led to a change in solidification behavior. The temperature at the solidification peaks gives qualitative information about droplet size whereas width and number of exothermic events are related to particle size distribution (mono/polydispersity and mono/multimodality) and microstructure. Emulsions with water as dispersed phase show a clear shift of the freezing peaks of the disperse phase which points on modified emulsion microstructure because of droplet coalescence, which is more pronounced at higher volume fraction and lower cooling rate. Emulsions with sucrose solution as dispersed phase showed the greatest stability, wherein the volume fraction and the cooling rate does not matter. The results allow conclusions about the mechanisms of crystallization processes in cocoa butter emulsions resulting as network crystallization.     

Stability of the oil-in-water type triacylglycerol emulsions

Lipid emulsions with saturated triacylglycerols (TAGs) with 4 to 10 carbons in each acyl chain were prepared to study how the oil component alters the stability of the lipid emulsions when phosphatidylcholines were used as emulsifiers. The average droplet size of the emulsions became smaller as the chain length of the TAG increased. For a given oil, emulsion with smaller droplets was formed with an emulsifier having higher HLB value. The influence of HLB values on the droplet size was biggest for the tributyrin (C4) emulsions. For the tricaprylin (C8) emulsions, droplet size was identical at given emulsifier concentrations regardless of HLB values. The HLB value and the concentration of the emulsifiers also affect the droplet size of the emulsions. The emulsions with smaller average droplet size were more stable than with bigger size for 20 days. The oil and water (o/w) interfacial tension is inversely proportional to the initial droplet size of the emulsion.     

Influence of processing factors on the stability of model mayonnaise with whole egg during long-term storage

Mayonnaise-like oil-in-water emulsions with different stabilities—evaluated from the degree of macroscopic defects, e.g., syneresis—were prepared by different formulations and processing conditions (egg yolk weight, homogenizer speed, and vegetable oil temperature). Emulsions prepared with lower egg yolk content were destabilized for shorter periods. The long-term stability of emulsions was weakly related to initial properties, e.g., oil droplet distribution and protein coverage at the interface. Protein aggregation between oil droplets was observed and would be responsible for the instability of emulsions exhibited by the appearance defects. SDS-PAGE results for adsorbed and unadsorbed proteins at the O/W interface suggested that predominant constituents adsorbed onto the interface were egg white proteins as compared with egg yolk components when the amount of added egg yolk was low. In present condition, egg white proteins adsorbed at the O/W interface could be a bridge of neighboring oil droplets thereby causing flocculation in emulsions.     

Physical properties of emulsion-based hydroxypropyl methylcellulose films: Effect of their microstructure

The initial characteristics of emulsions and the rearrangement of the oil droplets in the film matrix during film drying, which defines its microstructure, has an important role in the physical properties of the emulsion-based films. The objective of this work was to study the effect of the microstructure (two droplet size distributions) and stability (with or without surfactant) of HPMC oil-in-water emulsions over physical properties of HPMC emulsion-based edible films. HPMC was used to prepare sunflower oil-in-water emulsions containing 0.3 or 1.0% (w/w) of oil with or without SDS, as surfactant, using an ultrasonic homogenizer. Microstructure, rheological properties and stability of emulsions (creaming) were measured. In addition, microstructure, coalescence of oil droplets, surface free energy, optical and mechanical properties and water vapor transfer of HPMC films were evaluated. Image analysis did not show differences among droplet size distributions of emulsions prepared at different oil contents; however, by using SDS the droplet size distributions were shifted to lower values. Volume mean diameters were 3.79 and 3.77μm for emulsions containing 0.3 and 1.0% without surfactant, respectively, and 2.72 and 2.71μm for emulsions with SDS. Emulsions formulated with 1.0% of oil presented higher stability, with almost no change during 5 and 3 days of storage, for emulsions with and without SDS, respectively. Internal and surface microstructure of emulsion-based films was influenced by the degree of coalescence and creaming of the oil droplets. No effect of microstructure over the surface free energy of films was found. The incorporation of oil impaired the optical properties of films due to light scattering of light. Addition of oil and SDS decreased the stress at break of the emulsion-based films. The replace of HPMC by oil and SDS produce a lower "amount" of network structure in the films, leading to a weakening of their structure. The oil content and SDS addition had an effect over the microstructure and physical properties of HPMC-based emulsions which lead to different microstructures during film formation. The way that oil droplets were structured into the film had an enormous influence over the physical properties of HPMC films.