Multi-Directional Plasmonic Splitter and Polarization Analyzer Based on the Catenary Metasurface

Owing to the unique properties of strongly confined and enhanced electric fields, surface plasmon polaritons (SPPs) provide a new platform for the realization of ultracompact plasmonic circuits. However, there are challenges in coupling light into SPPs efficiently and subsequently routing SPPs. Here, we propose a multi-directional SPP splitter and polarization analyzer based on the catenary metasurface. Based on the abundant electromagnetic modes and geometric phase modulation principle of catenary structure, the device has realized high-efficiency beam splitting for four different polarization states (x-polarization, y-polarization, LCP, and RCP). The central wavelength of the device is 632 nm and the operation bandwidth can reach 70 nm (585–655 nm). Based on the phenomenon of SPP beam splitting, we present a prototype of a polarization analyzer, which can detect the polarization state of incident light by adding photodetector with light intensity logic threshold in four directions. Moreover, by combining this device with dynamic polarization modulation techniques, it is possible to be served as a router or switch in integrated photonic circuits.

     

Design of a Slit-Groove Coupler for Unidirectional Excitation of the Guided Surface Plasmon Polaritons Through a Plasmonic Slot Waveguide

In this paper, a plasmonic-photonic nanostructure has been introduced for efficient unidirectional coupling of free-space radiation to surface plasmon polariton (SPP) waves under normal illumination on a subwavelength slit. The structure consists of a conventional metallic slit-groove nanostructure integrated with a plasmonic waveguide to support SPP waves along the desired direction with a remarkable lateral confinement. The unidirectional coupling is achieved by using an integrated plasmonic distributed reflector designed under Bragg condition. This reflector basically distributes part of the light coupled through the slit into the SPP modes of the waveguide. Numerical simulations show that up to 26 % of the normally incident light couples to the transversely localized field of the surface plasmon. In addition, the ratio of mode current density of the surface plasmon, launched in the desired direction, to that in the opposite direction can reach about 23 times. This structure shows a 2.5-fold improvement in coupling efficiency relative to a standard slit-groove structure. Also, the transmission distance for the new nanostructure is shown to be more than 8 times greater than that of the standard nanostructure.     

Optimization of Optoelectronic Plasmonic Structures

We discuss the interplay between surface plasmon polaritons (SPPs) and localized shape resonances (LSRs) in a plasmonic structure working as a photo-coupler for a GaAs quantum well photodetector. For a targeted electronic inter-subband transition inside the quantum well, maximum photon absorption is found by compromising two effects: the mode overlapping with incident light and the lifetime of the resonant photons. Under the optimal conditions, the LSR mediates the coupling between the incident light and plasmonic structure while the SPP provides long-lived resonance which is limited ultimately by metal loss. The present work provides insight to the design of plasmonic photo-couplers in semiconductor optoelectronic applications.     

Complicated Wavefront Shaping of Surface Plasmon Polaritons on Metal Surface by Holographic Groove Patterns

Surface plasmon polaritons (SPPs) manipulation on metal surfaces is important for constructing ultracompact integrated micro/nano-optical devices and systems. We employ the methodology of surface electromagnetic wave holography (SWH) to design holographic groove patterns for controlling SPPs with complicated wavefronts traveling on metal surface. SPPs are scattered by these deli groove patterns and interfere with each other to form desired SPP wavefronts. Several devices are demonstrated to control the intensities and phases of SPPs, such as focusing a plane SPP or diverging SPPs to two points with different phases, and focusing SPPs with complicated beam profile to a point. The finite-difference time-domain simulations show that in all cases, the predesignated functionalities are fully achieved by the designed plasmonic holographic structures. The results strongly support the power of SWH for shaping the complicated wavefront of in-plane transporting SPPs.     

Directional Excitation of Surface Plasmon Polaritons by Circularly Polarized Vortex Beams

We investigate the excitation of surface plasmon polaritons (SPPs) using a metallic nanoaperture array illuminated by circularly polarized Laguerre-Gaussian (LG) vortex beams. The direction of SPP excitation is tunable by changing the circular polarization and topological charge of LG beams. The left- or right-handed circular polarization determines SPP propagation on either side of the nanoaperture array. Furthermore, varying the topological charge of LG beam will result in beam splitting of SPPs. We also utilize a composite nanoaperture array with different periods to achieve unidirectional excitation of SPPs. The study provides an interesting approach to control the excitation direction of SPPs and may find great applications in SPP generators and optical switches.

     

Signal peptide peptidases: A family of intramembrane-cleaving proteases that cleave type 2 transmembrane proteins

Five genes encode the five human signal peptide peptidases (SPPs), which are intramembrane-cleaving aspartyl proteases (aspartyl I-CLiPs). SPPs have been conserved through evolution with family members found in higher eukaryotes, fungi, protozoa, arachea, and plants. SPPs are related to the presenilin family of aspartyl I-CLiPs but differ in several key aspects. Presenilins (PSENs) and SPPs both cleave the transmembrane region of membrane proteins; however, PSENs cleave type 1 membrane proteins whereas SPPs cleave type 2 membrane proteins. Though the overall homology between SPPs and PSENs is minimal, they are multipass membrane proteins that contain two conserved active site motifs YD and GxGD in adjacent membrane-spanning domains and a conserved PAL motif of unknown function near their COOH-termini. They differ in that the active site YD and GxGD containing transmembrane domains of SPPs are inverted relative to PSENs, thus, orienting the active site in a consistent topology relative to the substrate. At least two of the human SPPs (SPP and SPPL3) appear to function without additional cofactors, but PSENs function as a protease, called γ-secretase, only when complexed with Nicastrin, APH-1 and Pen-2. The biological roles of SPP are largely unknown, and only a few endogenous substrates for SPPs have been identified. Nevertheless there is emerging evidence that SPP family members are highly druggable and may regulate both essential physiologic and pathophysiologic processes. Further study of the SPP family is needed in order to understand their biological roles and their potential as therapeutic targets.     

Nanofilmed Fourier-Transformed Spectrometer with the Interference of Surface Plasmon Wave

Plasmonics - A miniature Fourier-transformed spectrometer based on the subwavelength slit-groove configuration with the interference of surface plasmon wave is proposed. By gradually increasing the...     

Excitation and Optimization Modeling of Surface Plasmon Polaritons in a Concentric Circular Metallic Grating Film

Interaction behavior between surface plasmon polaritons (SPPs) and Hankel-distributed diffracted waves (DWs) on a silver concentric circular grating film is studied using a rigorous coupled-wave technique for circular structure. It is shown that the numerical technique reveals the excitation characteristics of SPPs in the circular metal grating as well as provides an accurate calculation of SPP intensities for further optimization designs. Results show that the SPPs can be excited by various DWs through the control of wavelength and angle of the incident light. The most efficient excitation of SPPs from this circular metal grating structure can be obtained from the +1^st-order DW under a normal incidence with wavelength close to the grating period, and the optimal thickness and duty cycle of the grating are found to be 370 and 0.5 nm, respectively. It is shown that the optimized intensity of SPPs excited from circular metal grating can be higher than that from strip metal grating by over one order of magnitude.     

Plasmon Nanofocusing with Negative Refraction in a High-Index Dielectric Wedge

Here, we describe a metal-insulator-insulator nanofocusing structure formed by a high-permittivity dielectric wedge on a metal substrate. The structure is shown to produce nanofocusing of surface plasmon polaritons (SPPs) in the direction opposite to the taper of the wedge, including a range of nanoplasmonic effects such as nanofocusing of SPPs with negative refraction, formation of plasmonic caustics within a nanoscale distance from the wedge tip, mutual transformation of SPP modes, and significant local field enhancements in the adiabatic and strongly nonadiabatic regimes. A combination of approximate analytical and rigorous numerical approaches is used to analyze the strength and position of caustics in the structure. In particular, it is demonstrated that strong SPP localization within spatial regions as small as a few tens of nanometers near the caustic is achievable in the considered structures. Contrary to other nanofocusing configurations, efficient nanofocusing is shown to occur in the strongly nonadiabatic regime with taper angles of the dielectric wedge as large as ～40° and within uniquely short distances (as small as a few dozens of nanometers) from the tip of the wedge. Physical interpretations of the obtained results are also presented and discussed.     

Imaging and Characterizing Long-Range Surface Plasmon Polaritons Propagating in a Submillimeter Scale by Two-Color Two-Photon Photoelectron Emission Microscopy

Long-range surface plasmon polaritons (SPPs), which propagate along metal/dielectric interfaces to submillimeter distances in the range of near-infrared (NIR) excitation wavelength, were examined by two-color two-photon photoelectron emission microscopy (2P-PEEM). Interferences between incident NIR photons and SPPs excited by the NIR photons at surface defects were imaged by detecting photoelectrons emitted from a gold surface, assisted by simultaneously irradiated ultraviolet photons which are to overcome the workfunction of the surface. The wavelength of the interference beat depends sensitively on the NIR wavelength. By analyzing the interference beat, the dispersion curve as well as phase and group velocities of SPP’s were experimentally obtained. The results closely match the theoretical one based on the Drude free electron model, indicating that two-color 2P-PEEM is applicable not only to the visualization of NIR-excited SPPs but also to the quantitative analysis of its physical properties. This method will be widely used to observe SPPs for various artificial plasmonic devices.     

Coated Drop-Shaped Nanowires for Guiding THz Surface Plasmon Polaritons with Nanoscale Confinement and Ultra-Long Propagation Distances

Focusing far beyond the diffraction limit is very important for terahertz (THz) wave applications due to its much longer wavelength compared with optical wave. Surface plasmon polaritons (SPPs) on metal wires are frequently used to attain this focusing. However, when the mode width is reduced down to the nanometer scale, the mode loss is very high. Here, a coated drop-shaped nanowire (CDSN) is proposed for guiding THz SPPs with both ultra-strong mode confinement (10 nm) and extreme-long propagation length (1~15 mm), which result from the distinctive mode fields around the top and bottom arcs, respectively, of the metal wire. The fantastic mode properties make the waveguide very useful in nanophotonics, bio-photonics, and highly integrated photonic circuits.     

Ragweed Subpollen Particles of Respirable Size Activate Human Dendritic Cells

Ragweed (Ambrosia artemisiifolia) pollen grains, which are generally considered too large to reach the lower respiratory tract, release subpollen particles (SPPs) of respirable size upon hydration. These SPPs contain allergenic proteins and functional NAD(P)H oxidases. In this study, we examined whether exposure to SPPs initiates the activation of human monocyte-derived dendritic cells (moDCs). We found that treatment with freshly isolated ragweed SPPs increased the intracellular levels of reactive oxygen species (ROS) in moDCs. Phagocytosis of SPPs by moDCs, as demonstrated by confocal laser-scanning microscopy, led to an up-regulation of the cell surface expression of CD40, CD80, CD86, and HLA-DQ and an increase in the production of IL-6, TNF-α, IL-8, and IL-10. Furthermore, SPP-treated moDCs had an increased capacity to stimulate the proliferation of naïve T cells. Co-culture of SPP-treated moDCs with allogeneic CD3⁺ pan-T cells resulted in increased secretion of IFN-γ and IL-17 by T cells of both allergic and non-allergic subjects, but induced the production of IL-4 exclusively from the T cells of allergic individuals. Addition of exogenous NADPH further increased, while heat-inactivation or pre-treatment with diphenyleneiodonium (DPI), an inhibitor of NADPH oxidases, strongly diminished, the ability of SPPs to induce phenotypic and functional changes in moDCs, indicating that these processes were mediated, at least partly, by the intrinsic NAD(P)H oxidase activity of SPPs. Collectively, our data suggest that inhaled ragweed SPPs are fully capable of activating dendritic cells (DCs) in the airways and SPPs'' NAD(P)H oxidase activity is involved in initiation of adaptive immune responses against innocuous pollen proteins.     

Effects of Dielectric Anisotropy on Surface Plasmon Polaritons in Three-Layer Plasmonic Nanostructures

The effects of highly anisotropic dielectric on surface plasmon polaritons (SPPs) are investigated in several three-layer plasmonic nanostructures. Dispersion relations of SPPs in anisotropic-dielectric-metal (ADM), dielectric-anisotropic-metal (DAM), and metal-anisotropic-metal (MAM) structures are analytically derived. The numerical results in the visible indicate that, in ADM, the propagation length of a conductor-gap-dielectric mode is changed from 5.9 to 91 μm and its cutoff thickness from 83 to 7 nm with varying the optical axis, while in DAM, the influences of anisotropic dielectric are reversed on propagation length and cutoff thickness. In MAM, by tuning the optical axis, the light confinement of symmetry SPPs mode varies about 10 %. Further numerical calculations show that the above results induced by the anisotropy of dielectric can be extended to the telecommunication frequency. The improved mode properties may be used in plasmonic-based nanodevices and tunable single surface plasmon sources.     

The Tunability of Surface Plasmon Polaritons in Graphene Waveguide Structures

The tunability of propagation properties of surface plasmon polariton (SPP) modes in a waveguide formed by two parallel graphene layers separated by a dielectric layer is studied. For this purpose, the dispersion equation of the structure is numerically solved and the effects of applied bias voltage, the role of effective structural parameters, and electron–phonon scattering rate on the propagation of symmetric and antisymmetric SPP waves are investigated. The results of calculations show that considering the electron–phonon scattering rate as a function of Fermi energy and temperature leads to a considerable decrease in the propagation length of SPPs. As the main result of this work, tuning the propagation characteristics of SPPs is possible by varying any of the parameters such as applied voltage, thickness of insulating layer between two graphene layers and permittivities of dielectric layers, and finally the temperature. It is found that antisymmetric mode benefits from a larger propagation length in comparison with that of the symmetric mode.

     

Research on Spoof Surface Plasmon Polaritons (SPPs) at Microwave Frequencies: a Bibliometric Review

Plasmonics - In recent years, Spoof surface plasmon polaritons (SPPs) have been studied at microwave (MW) frequencies. The Spoof SPPs can be supported by plasmonic metamaterials, which are usually...     

Guiding Terahertz Waves by a Single Row of Periodic Holes on a Planar Metal Surface

In this paper, we show that surface plasmon polaritons (SPPs) can be sustained by a single row of holes periodically drilled on a perfect electric conductor surface. These SPPs can be strongly confined in the transverse plane and they possess an excellent modal shape. In the terahertz regime, large propagation length is available for highly confined SPPs on a real-metal surface waveguide. As the dispersion characteristics of such SPPs can be controlled by the surface geometry, unusual total reflection phenomenon occurs when waves travel along a nonuniform surface waveguide with gradually increasing hole depths.     

Metal-Dielectric Composite Holography for Controlling the Propagations of Surface Plasmon Polaritons

Plasmonics - Controlling the propagations of surface plasmon polaritons (SPPs) is important for many applications. Now, mainly structures for controlling SPPs are etched directly in the metal...     

Influence of Fabrication Methods of Gold and Silver Layers on Surface Plasmon Polaritons Propagation Length

We present an experimental study of surface plasmon polaritons (SPPs) propagation length (L_SPP) on polycrystalline metal (gold and silver) films, fabricated by evaporation and sputtering techniques on glass substrates. For the excitation of SPPs, polymer grids on the sample surface are used. The SPPs are excited by a He-Ne (633 nm) and the L_SPP are measured by grating-coupling method and the leakage radiation microscopy. Dependence of L_SPP on the film thickness is also investigated. The longer L_SPP is observed with evaporation technique in comparison to the sputtering technique for the silver films. On the other hand, sputtering technique provides longer L_SPP for the gold films. Additionally, atomically flat crystalline gold flakes are also considered for the SPPs evaluation. The L_SPP estimation on these flakes is carried out for light wavelength of 633 and 800 nm.

     

Efficient Surface Plasmon Polariton Excitation with the Beam Generated by Micro Triangular Prism

The optical beam generated by a micro triangular prism is presented to excite surface plasmon polaritons (SPPs) on a single silver nano slit. The electromagnetic fields generated by the micro triangular prism and the excited surface plasmon polaritons are simulated with finite-difference time-domain method. Compared with directly normal incident beam, the efficiency of SPPs’ excitation with the beam generated by the micro triangular prism is highly improved.     

Tunable Multi-Port Surface Plasmon Polariton Excitation with Nanostructures

Surface plasmon polaritons (SPPs) have appealing features such as tighter spatial confinement and higher local field intensity. Manipulation of surface plasmon polaritons on metal/dielectric interface is an important aspect in the achievement of integrated plasmonic circuit beyond the diffraction limit. Here, we introduce a design of pin cushion structure and a holographic groove pattern structure for tunable multi-port SPPs excitation and focusing. Free space light is coupled into SPPs through momentum matching conditions. Both nanostructures are capable of tunably controlling of SPPs depending on the incident polarizations, while the holographic method provides more flexibility of wavelength-dependent excitations. Furthermore, a quantitative method is applied to calculate the efficiencies of excitation for both nanostructures under different conditions, including radially polarized incident beams. These results can work as a guidance and be helpful to further choice of the suitable design strategies for variable plasmonic applications such as beam splitter, on-chip spectroscopy, and plasmonic detectors.