Highly sensitive fluorescent-labeled probes and glass slide hybridization for the detection of plant RNA viruses and a viroid

In this study, a modified method of the conventional RNA dot-blot hybridization was established, by replacing ~(32)p labels with CY5 labels and replacing nylon membranes with positive-charged glass slides, for detecting plant RNA viruses and a viroid. The modified RNA dot-blot hybridization method was named glass slide hybridization. The optimum efficiency of RNA binding onto the surfaces of activated glass slide was achieved using aminosilane-coated glass slide as a solid matrix and 5×saline sodium citrate (SSC) as a spotting solution. Using a CY5-labeled DNA probe prepared through PCR amplification, the optimized glass slide hybridization could detect as little as 1.71 pg of tobacco mosaic virus (TMV) RNA. The sensitivity of the modified method was four times that of dot-blot hybridization on nylon membrane with a ~(32)P-labeled probe. The absence of false positive within the genus Potyvirus [potato virus A, potato virus Y (PVY) and zucchini yellow mosaic virus] showed that this method was highly specific. Furthermore, potato spindle tuber viroid (PSTVd) was also detected specifically. A test of 40 field potato samples showed that this method was equivalent to the conventional dot-blot hybridization for detecting PVY and PSTVd. To our knowledge, this is the first report of using dot-blot hybridization on glass slides with fluorescent-labeled probes for detecting plant RNA viruses and a viroid.     

A Strategy to Optimize the Oligo-Probes for Microarray-based Detection of Viruses

DNA microarrays have been acknowledged to represent a promising approach for the detection of viral pathogens. However, the probes designed for current arrays could cover only part of the given viral variants, that could result in false-negative or ambiguous data. If all the variants are to be covered, the requirement for more probes would render much higher spot density and thus higher cost of the arrays. Here we have developed a new strategy for oligonucleotide probe design. Using type I human immunodeficiency virus (HIV-1) tat gene as an example, we designed the array probes and validated the optimized parameters in silico. Results show that the oligo number is significantly reduced comparing with the existing methods, while specificity and hybridization efficiency remain intact. The adoption of this method in reducing the oligo numbers could increase the detection capacity for DNA microarrays, and would significantly lower the manufacturing cost for making array chips.     

Granulometric analysis of spots in DNA microarray images

As the topological properties of each spot in DNA microarray images may vary from one another, we employed granulometries to understand the shape-size content contributed due to a significant intensity value within a spot. Analysis was performed on the microarray image that consisted of 240 spots by using concepts from mathematical morphology. In order to find out indices for each spot and to further classify them, we adopted morphological multiscale openings, which provided microarrays at multiple scales. Successive opened microarrays were subtracted to identify the protrusions that were smaller than the size of structuring element. Spot-wise details, in terms of probability of these observed protrusions,were computed by placing a regularly spaced grid on microarray such that each spot was centered in each grid. Based on the probability of size distribution functions of these protrusions isolated at each level, we estimated the mean size and texture index for each spot. With these characteristics, we classified the spots in a microarray image into bright and dull categories through pattern spectrum and shape-size complexity measures. These segregated spots can be compared with those of hybridization levels.     

Gene expression profile in immunologically injured liver cell of mice

To study the gene expression profiles between immunologically injured liver cell and normal liver cell of mice and to screen on a large scale the differentially expressed genes associated with the formation of liver injury,the experimental mice were randomly divided into the normal group for controlling and the immunologically liver-injured group induced by BCG and LPS.The liver mRNA of the two groups were extracted respectively and reversely-transcribed to cDNA with the incorpora-tion of different fluorescence(Cy3,Cy5) labeled dUTP as the hybridization probes.The mixed probes were hybridized to the cDNA microarray chips.The fluorescent signal results were acquired by scanner ScanArray 4000 and analyzed with software GenePix Pro 3.0.Among the 14112 target genes,293 genes were found to be significantly differentially expressed,in which 188 genes were up-regulated and 105 genes were down-regulated.Based on the analysis of biological functions of those differentially expressed genes,it was indicated that the occurrence and development of mouse liver damage induced by BCG and LPS were highly correlated with the processes of immune reac-tions,cell synthesis,metabolism,apoptosis and transportation in liver cell,which might be quite im-portant for elucidating the regulatory network of gene expression associated with the liver damage,also important for finally discovering the pathogenic mechanisms of immunological liver damage.     

Chip-based visual detection of microRNA using DNA-functionalized gold nanoparticles

In the present study, we developed a highly sensitive and convenient biosensor consisting of gold nanoparticle(Au NP) probes and a gene chip to detect micro RNAs(mi RNAs). Specific oligonucleotides were attached to the glass surface as capture probes for the target mi RNAs, which were then detected via hybridization to the Au NP probes. The signal was amplified via the reduction of HAu Cl4 by H2O2. The use of a single Au NP probe detected 10 pmol L?1 of target mi RNA. The recovery rate for mi R-126 from fetal bovine serum was 81.5%–109.1%. The biosensor detection of mi R-126 in total RNA extracted from lung cancer tissues was consistent with the quantitative PCR(q PCR) results. The use of two Au NP probes further improved the detection sensitivity such that even 1 fmol L?1 of target mi R-125a-5p was detectable. This assay takes less than 1 h to complete and the results can be observed by the naked eye. The platform simultaneously detected lung cancer related mi R-126 and mi R-125a-5p. Therefore, this low cost, rapid, and convenient technology could be used for ultrasensitive and robust visual mi RNA detection.     

Identification and analysis of genes present in Leptospira interrogans serovar lai but absent in L. biflexa serovar monvalerio

Genes present in virulent bacterial strains but absent in avirulent close relatives can be of great biologic and clinical interest. This project aimed to identify strain specific DNA sequences of Leptospira interrogens serovar lai, which is absent in the saprophytic L. biflexa serovar monvalerio, via suppression subtractive hybridization with the former as the tester while the latter as the driver. The mixture of PCR amplified DNA fragments from two subtractive hybridization experiments were cloned into pMD 18-T vector and the positive clones were identified by dot blotting against the chromosome DNA of the two strains individually. After DNA sequencing and analysis, the distribution of these genomic fragment sequences in a panel of pathogenic and nonpathogenic leptospires was investigated employing dot blot analysis. Among the 188 positive clones randomly chosen, 24 contained the tester strain specific genomic regions, of which, 5 were non-coding fragments while the others contained 23 distinct protein coding sequences. Besides 9 genes encoding functional proteins, 12 genes encode unknown proteins and the rest two genes encode proteins with recognizable domain structures, one for a putative leucine-rich repeats (LRR) family protein while the other as an outer-membrane protein. Our experiment results indicated that suppression subtractive hybridization is effective for screening specific DNA sequences between two leptospiral strains, and some of these sequences might be responsible for virulence determination. Further analysis of these DNA sequences will provide important information on the pathogenesis of Leptospira.     

A hot start alternative for high-fidelity DNA polymerase amplification mediated by quantum dots

Quantum dots （QDs） are of great interest due to their unique chemical and physical properties. Recently, a hot start （HS） polymerase chain reaction （PCR） amplification performance based on QDs with a high-fidelity Pfu DNA polymerase has been reported. However, whether QDs can trigger HS effects with other high-fidelity or conventional DNA polymerases is yet to be understood. In the present study, we studied the QD-triggered HS effects with four high-fidelity and three conventional DNA polymerases, and the HS effect comparisons among them were also made. It was found that QDs could trigger a distinct HS PCR amplification performance with all the four tested high,fidelity DNA polymerases, and specific target DNA could be well amplified even if the PCR mixture was preincubated for 2 h at 50℃. On the contrary, the HS effects were not prominent with all the three conventional Taq DNA polymerases. Specifically, the fidelity of Pfu is not sacrificed in the presence of QDs, even after a 1 h pre-incu- bation at 50℃ before PCR. Furthermore, the electrophoresis results preliminarily demonstrated that QDs prefer to adsorb high-fidelity polymerases rather than conventional ones, which might result in the QD-triggered HS effects on PCR performance by using high-fidelity DNA poly- merases.     

In situ amplification of DNA fragments specific for human Y chromosome in cellular nuclei by PCR

Using single primer pairs Y3 and Y4, in siru polymerase chain reaction (in situ PCR) was successfully performed on the specimen slides of peripheral leukocytes. By both of the direct digpxiginin-11-dUTP incorporation into PCR products with in situ PCR (direct in situ PCR) and in situ PCR followed by detection of in situ hybridization (indirect in siru PCR), DNA fragments specific for human Y chromosome were obviously amplified in cellular nuclei of specimens on the slides. The results were verified by Southern analysis. The methodology of in situ PCR and its application were discussed.     

Cloning and Sequence Analysis of Genome from the Inner Mongolia Strain of the Endogenous Betaretroviruses （enJSRV）

In order to amplify the complete genome of enJSRV from the strain of Inner Mongolia （enJSRV-NM）, we used enJSRV-specific and JSRV-specific DNA probes in dot blot hybridization. Seven pairs of primers were designed based on Genbank sequences. Seven fragments were obtained by PCR and were cloned into the PMD19-T vectors. The recombinant plasmids were sequenced and analyzed. The results showed that the genome was 7 942 bp in length and contained four overlapping open reading frames corresponding to the gag, pro, pol and env genes as well as an additional open reading frame （orf-x） that overlaps the 3＇ end of the pol gene. The nucleotide acid sequences of the enJSRV-NM loci were compared with the sequences of South Africa enJS56A1 strain （Accession No.AF153615） and USA JSRV21 strain （Accession No. AF105220）. The nucleotide acid identities were 99.2% and 92.3% respectively. Two zinc fingers were found in the NC region in the predicted amino acid sequence. However, the YXXM motif, which is a reliable molecular marker for the infectious exogenous virus, was not found in the TM region. It was found that the enJSRV-NM region was 90%-98% identical at the amino acid level to its exogenous infectious counterparts in most of the retroviral genome. This is the first nucleotide sequence of enJSRV reported in P.R China. The resource work has provided a wide range of information useful not only for expression genomics and annotation of genomic DNA sequence, but also for further research on the clinical diagnosis of OPA.     

百合病毒的DNA芯片检测技术研究

根据已知的黄瓜花叶病毒,百合无症病毒、百合斑驳病毒基因核苷酸序列,设计引物和探针,制备寡核苷酸芯片。用Cy3标记核苷酸引物,不对称RT-PCR扩增产物与芯片上的寡核苷酸探针杂交,荧光扫描仪检测并分析信号。研究制备的基因芯片能够检测侵染百合的3种重要病毒核酸的特异性荧光信号,该项技术具有特异、灵敏、快速的优点。     

Characterization of an inexpensive, nontoxic, and highly sensitive microarray substrate

An agarose film has been proposed as an efficient substrate for producing microarrays. The original film preparation procedure was simplified significantly by grafting the agarose layer directly onto unmodified microscope glass slides instead of aminated glass slides, and the blocking procedure was replaced with a wash in 0.1x standard saline citrate (SSC) and 0.5% sodium dodecyl sulfate (SDS) without decreasing the performance of the produced microarrays. Characterization of the grafted agarose film using atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that the agarose film had a 10-fold increase in surface roughness compared to glass and that the interior of the agarose film was porous, with pore sizes between 100-500 nm. A comparison of hybridization on aldehyde-activated agarose-coated microarray slides and commercial amino-reactive microarray slides showed that aldehyde-activated agarose-coated slides had the highest signal-to-noise ratio of 850, suggesting that the aldehyde-activated agarose microarray slides are suitable in applications where analytes have a wide concentration range. By immobilizing the DNA probes using ultraviolet (UV) light, the signal-to-noise ratio was further increased to 3000 on the agarose microarray slides. The specificity of the UV cross-linked DNA probes was demonstrated using 21 and 25 bp long capture probes, enabling discrimination of target molecules differing in only one base.     

Dendrimeric coating of glass slides for sensitive DNA microarrays analysis

Successful use and reliability of microarray technology is highly dependent on several factors, including surface chemistry parameters and accessibility of cDNA targets to the DNA probes fixed onto the surface. Here, we show that functionalisation of glass slides with homemade dendrimers allow production of more sensitive and reliable DNA microarrays. The dendrimers are nanometric structures of size-controlled diameter with aldehyde function at their periphery. Covalent attachment of these spherical reactive chemical structures on amino-silanised glass slides generates a reactive ~100 Å layer onto which amino-modified DNA probes are covalently bound. This new grafting chemistry leads to the formation of uniform and homogenous spots. More over, probe concentration before spotting could be reduced from 0.2 to 0.02 mg/ml with PCR products and from 20 to 5 µM with 70mer oligonucleotides without affecting signal intensities after hybridisation with Cy3- and Cy5-labelled targets. More interestingly, while the binding capacity of captured probes on dendrimer-activated glass surface (named dendrislides) is roughly similar to other functionalised glass slides from commercial sources, detection sensitivity was 2-fold higher than with other available DNA microarrays. This detection limit was estimated to 0.1 pM of cDNA targets. Altogether, these features make dendrimer-activated slides ideal for manufacturing cost-effective DNA arrays applicable for gene expression and detection of mutations.     

DNA microarrays with unimolecular hairpin double-stranded DNA probes: fabrication and exploration of sequence-specific DNA/protein interactions

We have fabricated double-stranded DNA (dsDNA) microarrays containing unimolecular hairpin dsDNA probes immobilized on glass slides. The unimolecular hairpin dsDNA microarrays were manufactured by four steps: Firstly, synthesizing single-stranded DNA (ssDNA) oligonucleotides with two reverse-complementary sequences at 3' hydroxyl end and an overhang sequence at 5' amino end. Secondly, microspotting ssDNA on glutaraldehyde-derived glass slide to form ssDNA microarrays. Thirdly, annealing two reverse-complementary sequences to form hairpin primer at 3' end of immobilized ssDNA and thus to create partial-dsDNA microarray. Fourthly, enzymatically extending hairpin primer to convert partial-dsDNA microarrays into complete-dsDNA microarray. The excellent efficiency and high accuracy of the enzymatic synthesis were demonstrated by incorporation of fluorescently labeled dUTPs in Klenow extension and digestion of dsDNA microarrays with restriction endonuclease. The accessibility and specificity of the DNA-binding proteins binding to dsDNA microarrays were verified by binding Cy3-labeled NF-kappaB to dsDNA microarrays. The dsDNA microarrays have great potential to provide a high-throughput platform for investigation of sequence-specific DNA/protein interactions involved in gene expression regulation, restriction and so on.     

Stripping custom microRNA microarrays and the lessons learned about probe-slide interactions

Microarrays have been used extensively in gene expression profiling and genotyping studies. To reduce the high cost and enhance the consistency of microarray experiments, it is often desirable to strip and reuse microarray slides. Our genome-wide analysis of microRNA expression involves the hybridization of fluorescently labeled nucleic acids to custom-made, spotted DNA microarrays based on GAPSII-coated slides. We describe here a simple and effective method to regenerate such custom microarrays that uses a very low-salt buffer to remove labeled nucleic acids from microarrays. Slides can be stripped and reused multiple times without significantly compromising data quality. Moreover, our analyses of the performance of regenerated slides identifies parameters that influence the attachment of oligonucleotide probes to GAPSII slides, shedding light on the interactions between DNA and the microarray surface and suggesting ways in which to improve the design of oligonucleotide probes.     

Evaluation of thin films of agarose on glass for hybridization of DNA to identify plant pathogens with microarray technology

Agarose-coated glass slides, after activation, were spotted with amine-modified oligonucleotide probes using a manual eight-pin arraying device. Two probes, designed to identify two common greenhouse fungal plant pathogens, Didymella bryoniae and Botrytis cinerea, were hybridized with polymerase chain reaction (PCR)-amplified fluorescently labeled DNA extracted from pure culture and from diseased plant tissue. The probes easily distinguished these pathogens from each other without cross reaction. Thickness of the agarose layer and length of the sample DNA were important factors affecting hybridization efficiency of immobilized probe to PCR product. These factors did not affect hybridization with short complementary oligonucleotide. Probes fixed on agarose-coated slides could differentiate samples as readily as probes on nylon but with potentially higher spot density and gave much better signal than probes on silylated slides. The use of plain glass slides, agarose, and a manual arrayer makes this technique useful for developing specialized and inexpensive DNA microarrays on a solid rigid substrate.     

人乳头瘤病毒(HPV)基因芯片的研究

探讨将基因芯片与限制性显示技术相结合对HPV进行基因检测和分型的方法。分离HPV6,11,16和18型的基因片段作为探针,纯化后应用PixSys 5500点样仪将其打印在氨基包被的玻片上制作HPV基因芯片,对HPV样品进行荧光标记后与芯片杂交,经清洗和干燥后对芯片进行扫描和结果分析。对HPV基因检测芯片的制作与检测的实验条件进行了初步研究,并对应用HPV基因芯片进行分型做了初步探讨。建立的检测芯片实验方法可行,并且显示了在HPV分型中的应用前景。     

Improvement of yeast biochip sensitivity using multilayer inorganic sol-gel substrates

Today, microarray fluorescence detection is still limited because a great proportion of hybrids remain undetectable. In this paper we describe sol-gel optical multilayers (stacks of low- and high-index layers) deposited on glass slides which increase the fluorescence of DNA microarrays and favour the detection of fluorescent targets. An alternative to the expensive and time-consuming physical vapour deposition technology is proposed. It is a low-cost sol-gel coating of glass slides, each layer being made by "dipping" (alternatively in SiO2 or TiO2 solutions), "draining and drying". After the selection of the best surface layer of the substrates, the multilayer mirrors modelled for one (Cy3) or two (Cy3 and Cy5) fluorophores are spotted with a series of Yeast probes and compared to similar microarrays on standard glass slides through hybridisation experiments. The fluorescence images of the mirrors show increased signals for all the probes. The enhancement factors determined for Cy3 and for Cy3/Cy5 mirrors (10-12 and 4-5, respectively) are consistent with the initial modelling. This allows the assessment of the basal expression levels of Yeast low-expressed genes. Moreover, these substrates show a noticeable increase in sensitivity for induction/repression ratio measurements in differential gene expression experiments. So, they could be considered as promising tools for the analysis of small biological samples.     

用氨基修饰的载玻片制作cDNA微阵列

cDNA微阵列已在基因差异表达、寻找新基因等研究方面获得广泛应用,但有关cDNA微阵列的制作,目前多采用多聚赖氨酸修饰的载玻片为探针固定载体,固定效果较差.用氨基硅烷处理的载玻片为载体制作cDNA微阵列,然后考察其固定效率、检测灵敏度、稳定性、实用性等指标.结果表明,用氨基硅烷处理的载玻片具有比多聚赖氨酸更令人满意的核酸固定效率、检测灵敏度,且稳定实用.因此,用氨基硅烷修饰的载玻片为探针固定载体制作cDNA微阵列较为理想.     

Functionalization of poly(methyl methacrylate) (PMMA) as a substrate for DNA microarrays

A chemical procedure was developed to functionalize poly(methyl methacrylate) (PMMA) substrates. PMMA is reacted with hexamethylene diamine to yield an aminated surface for immobilizing DNA in microarrays. The density of primary NH₂ groups was 0.29 nmol/cm². The availability of these primary amines was confirmed by the immobilization of DNA probes and hybridization with a complementary DNA strand. The hybridization signal and the hybridization efficiency of the chemically aminated PMMA slides were comparable to the hybridization signal and the hybridization efficiency obtained from differently chemically modified PMMA slides, silanized glass, commercial silylated glass and commercial plastic Euray™ slides. Immobilized and hybridized densities of 10 and 0.75 pmol/cm², respectively, were observed for microarrays on chemically aminated PMMA. The immobilized probes were heat stable since the hybridization performance of microarrays subjected to 20 PCR heat cycles was only reduced by 4%. In conclusion, this new strategy to modify PMMA provides a robust procedure to immobilize DNA, which is a very useful substrate for fabricating single use diagnostics devices with integrated functions, like sample preparation, treatment and detection using microfabrication and microelectronic techniques.