Liberation of hydrogen sulfide during the catalytic action of Desulfovibrio hydrogenase under the atmosphere of hydrogen

The active site of [NiFe] hydrogenase from Desulfovibrio species is composed of a binuclear Ni-Fe complex bearing three diatomic nonprotein ligands to Fe and three bridges between the two metals, two of which are thiolate side chains of the protein moiety. The third bridging atom in the enzyme isolated from D. vulgaris Miyazaki F was suggested to be sulfur species, but was suggested to be oxygen species in D. gigas enzyme. When the hydrogenase from D. vulgaris Miyazaki F was incubated under the atmosphere of H2, H2S was liberated from the enzyme only in the presence of its electron carrier, cytochrome c3 or methylviologen. The amount of H2S liberation was little in the absence of electron carrier or essentially null when the enzyme was incubated under N2. The amount of H2S liberated was about 37% of the hydrogenase contained in the reaction vial in molar basis. These observations are in agreement with the recent observation that the third bridging site at the Ni-Fe active site is vacant in the reduced form of the enzyme revealed by X-ray crystallography.     

The presence of a SO molecule in [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki as detected by mass spectrometry

The active site of [NiFe] hydrogenase is a binuclear metal complex composed of Fe and Ni atoms and is called the Ni–Fe site, where the Fe atom is known to be coordinated to three diatomic ligands. Two mass spectrometric techniques, pyrolysis-MS (pyrolysis-mass spectrometry) and TOF-SIMS (time-of-flight secondary ion mass spectrometry), were applied to several proteins, including native and denatured forms of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F, [Fe₄S₄]₂-ferredoxin from Clostridium pasteurianum, [Fe₂S₂]-ferredoxin from Spirulina platensis, and porcine pepsin. Pyrolysis-MS revealed that only native hydrogenase liberated SO/SO₂ (ions of m/z 48 and 64 at an equilibrium ratio of SO and SO₂) at relatively low temperatures before the covalent bonds in the polypeptide moiety started to decompose. TOF-SIMS indicated that native Miyazaki hydrogenase released SO/SO₂ (m/z 47.97 and 63.96) as secondary ions when irradiated with a high-energy Ga⁺ beam. Denatured hydrogenase, clostridial ferredoxin, and pepsin did not release SO as a secondary ion. The FT-IR spectrum of the enzyme suggested the presence of CO and CN. These lines of evidence suggest that the three diatomic ligands coordinated to the Fe atom at the Ni–Fe site in Miyazaki hydrogenase are SO, CO, and CN. The role of the SO ligand in helping to cleave H₂ molecules at the active site and stabilizing the Fe atom in the diamagnetic Fe(II) state in the redox cycle of this enzyme is discussed.     

Cloning and sequencing of a [NiFe] hydrogenase operon from Desulfovibrio vulgaris Miyazaki F

A hydrogenase operon was cloned from chromosomal DNA isolated from Desulfovibrio vulgaris Miyazaki F with the use of probes derived from the genes encoding [NiFe] hydrogenase from Desulfovibrio vulgaris Hildenborough. The nucleic acid sequence of the cloned DNA indicates this hydrogenase to be a two-subunit enzyme: the gene for the small subunit (267 residues; molecular mass = 28763 Da) precedes that for the large subunit (566 residues; molecular mass = 62495 Da), as in other [NiFe] and [NiFeSe] hydrogenase operons. The amino acid sequences of the small and large subunits of the Miyazaki hydrogenase share 80% homology with those of the [NiFe] hydrogenase from Desulfovibrio gigas. Fourteen cysteine residues, ten in the small and four in the large subunit, which are thought to co-ordinate the iron-sulphur clusters and the active-site nickel in [NiFe] hydrogenases, are found to be conserved in the Miyazaki hydrogenase. The subunit molecular masses and amino acid composition derived from the gene sequence are very similar to the data reported for the periplasmic, membrane-bound hydrogenase isolated by Yagi and coworkers, suggesting that this hydrogenase belongs to the general class of [NiFe] hydrogenases, despite its low nickel content and apparently anomalous spectral properties.     

Spectroelectrochemical characterization of the [NiFe] hydrogenase of Desulfovibrio vulgaris Miyazaki F

The active site in the [NiFe] hydrogenase of Desulfovibrio vulgaris Miyazaki F has been investigated by Fourier transform infrared (FTIR) spectroscopy. Analysis of the spectra allowed the three diatomic inorganic ligands to Fe in this enzyme to be identified as one CO molecule and two CN(-) molecules. Furthermore, pH-dependent redox titrations were performed to determine the midpoint potentials as well as the pK value of the respective reactions and revealed that each single-electron redox transition is accompanied by a single-proton transfer step. The comparison of these spectra with those published for other [NiFe] hydrogenases shows that the electronic structure of the active sites of these enzymes and their redox processes are essentially the same. Nevertheless, differences with respect to the frequency of the CO band and the pH dependence of the Ni-R states have been observed. Finally, the frequency shifts of the bands in the IR spectra were interpreted with respect to the electronic configuration of the redox intermediates in the catalytic cycle.     

Activation process of [NiFe] hydrogenase elucidated by high-resolution X-ray analyses: conversion of the ready to the unready state

Hydrogenases catalyze oxidoreduction of molecular hydrogen and have potential applications for utilizing dihydrogen as an energy source. [NiFe] hydrogenase has two different oxidized states, Ni-A (unready, exhibits a lag phase in reductive activation) and Ni-B (ready). We have succeeded in converting Ni-B to Ni-A with the use of Na2S and O2 and determining the high-resolution crystal structures of both states. Ni-B possesses a monatomic nonprotein bridging ligand at the Ni-Fe active site, whereas Ni-A has a diatomic species. The terminal atom of the bridging species of Ni-A occupies a similar position as C of the exogenous CO in the CO complex (inhibited state). The common features of the enzyme structures at the unready (Ni-A) and inhibited (CO complex) states are proposed. These findings provide useful information on the design of new systems of biomimetic dihydrogen production and fuel cell devices.     

EPR and redox properties of Desulfovibrio vulgaris Miyazaki hydrogenase: comparison with the Ni-Fe enzyme from Desulfovibrio gigas.

We have carried out a detailed redox titration monitored by EPR on the hydrogenase from Desulfovibrio vulgaris Miyazaki. Typical 3Fe and nickel signals have been observed, which are very similar to those given by Desulfovibrio gigas hydrogenase in all the characteristic redox states of the enzyme. This confirms that D. vulgaris Miyazaki hydrogenase is a Ni-Fe enzyme closely related to that from D. gigas, as was recently proposed on the basis of sequence comparisons (Deckers, H.M., Wilson, F.R. and Voordouw, G. (1990) J. Gen. Microb. 136, 2021-2028).     

NiFe] and [FeS] cofactors in the membrane-bound hydrogenase of Ralstonia eutropha investigated by X-ray absorption spectroscopy: insights into O(2)-tolerant H(2) cleavage

Molecular features that allow certain [NiFe] hydrogenases to catalyze the conversion of molecular hydrogen (H(2)) in the presence of dioxygen (O(2)) were investigated. Using X-ray absorption spectroscopy (XAS), we compared the [NiFe] active site and FeS clusters in the O(2)-tolerant membrane-bound hydrogenase (MBH) of Ralstonia eutropha and the O(2)-sensitive periplasmic hydrogenase (PH) of Desulfovibrio gigas. Fe-XAS indicated an unusual complement of iron-sulfur centers in the MBH, likely based on a specific structure of the FeS cluster proximal to the active site. This cluster is a [4Fe4S] cubane in PH. For MBH, it comprises less than ~2.7 ? Fe-Fe distances and additional longer vectors of ≥3.4 ?, consistent with an Fe trimer with a more isolated Fe ion. Ni-XAS indicated a similar architecture of the [NiFe] site in MBH and PH, featuring Ni coordination by four thiolates of conserved cysteines, i.e., in the fully reduced state (Ni-SR). For oxidized states, short Ni-μO bonds due to Ni-Fe bridging oxygen species were detected in the Ni-B state of the MBH and in the Ni-A state of the PH. Furthermore, a bridging sulfenate (CysSO) is suggested for an inactive state (Ni(ia)-S) of the MBH. We propose that the O(2) tolerance of the MBH is mainly based on a dedicated electron donation from a modified proximal FeS cluster to the active site, which may favor formation of the rapidly reactivated Ni-B state instead of the slowly reactivated Ni-A state. Thereby, the catalytic activity of the MBH is facilitated in the presence of both H(2) and O(2).     

A single-crystal ENDOR and density functional theory study of the oxidized states of the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F

The catalytic center of the [NiFe] hydrogenase of Desulfovibrio vulgaris Miyazaki F in the oxidized states was investigated by electron paramagnetic resonance and electron–nuclear double resonance spectroscopy applied to single crystals of the enzyme. The experimental results were compared with density functional theory (DFT) calculations. For the Ni-B state, three hyperfine tensors could be determined. Two tensors have large isotropic hyperfine coupling constants and are assigned to the β-CH₂ protons of the Cys-549 that provides one of the bridging sulfur ligands between Ni and Fe in the active center. From a comparison of the orientation of the third hyperfine tensor with the tensor obtained from DFT calculations an OH⁻ bridging ligand has been identified in the Ni-B state. For the Ni-A state broader signals were observed. The signals of the third proton, as observed for the “ready” state Ni-B, were not observed at the same spectral position for Ni-A, confirming a structural difference involving the bridging ligand in the “unready” state of the enzyme. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users. Maurice van Gastel and Matthias Stein contributed equally to this work.     

The crystal structure of a reduced [NiFeSe] hydrogenase provides an image of the activated catalytic center.

BACKGROUND: [NiFeSe] hydrogenases are metalloenzymes that catalyze the reaction H2<-->2H+ + 2e-. They are generally heterodimeric, contain three iron-sulfur clusters in their small subunit and a nickel-iron-containing active site in their large subunit that includes a selenocysteine (SeCys) ligand. RESULTS: We report here the X-ray structure at 2.15 A resolution of the periplasmic [NiFeSe] hydrogenase from Desulfomicrobium baculatum in its reduced, active form. A comparison of active sites of the oxidized, as-prepared, Desulfovibrio gigas and the reduced D. baculatum hydrogenases shows that in the reduced enzyme the nickel-iron distance is 0.4 A shorter than in the oxidized enzyme. In addition, the putative oxo ligand, detected in the as-prepared D. gigas enzyme, is absent from the D. baculatum hydrogenase. We also observe higher-than-average temperature factors for both the active site nickel-selenocysteine ligand and the neighboring Glu18 residue, suggesting that both these moieties are involved in proton transfer between the active site and the molecular surface. Other differences between [NiFeSe] and [NiFe] hydrogenases are the presence of a third [4Fe4S] cluster replacing the [3Fe4S] cluster found in the D. gigas enzyme, and a putative iron center that substitutes the magnesium ion that has already been described at the C terminus of the large subunit of two [NiFe] hydrogenases. CONCLUSIONS: The heterolytic cleavage of molecular hydrogen seems to be mediated by the nickel center and the selenocysteine residue. Beside modifying the catalytic properties of the enzyme, the selenium ligand might protect the nickel atom from oxidation. We conclude that the putative oxo ligand is a signature of inactive 'unready' [NiFe] hydrogenases.     

Computational study of the electronic structure and magnetic properties of the Ni–C state in [NiFe] hydrogenases including the second coordination sphere

[NiFe] hydrogenases catalyze the reversible formation of H₂. The [NiFe] heterobimetallic active site is rich in redox states. Here, we investigate the key catalytic state Ni?CC of Desulfovibrio vulgaris Miyazaki F hydrogenase using a cluster model that includes the truncated amino acids of the entire second coordination sphere of the enzyme. The optimized geometries, computed g?tensors, hyperfine coupling constants, and IR stretching frequencies all agree well with experimental values. For the hydride in the bridging position, only a single minimum on the potential energy surface is found, indicating that the hydride bridges and binds to both nickel and iron. The influence of the second coordination sphere on the electronic structure is investigated by comparing results from the large cluster models with truncated models. The largest interactions of the second coordination sphere with the active site concern the hydrogen bonds with the cyanide ligands, which modulate the bond between iron and these ligands. Secondly, the electronic structure of the active site is found to be sensitive to the protonation state of His88. This residue forms a hydrogen bond with the spin-carrying sulfur atom of Cys549, which in turn tunes the spin density at the nickel and coordinating sulfur atoms. In addition, the unequal distribution of spin density over the equatorial cysteine residues results from different orientations of the cysteine side chains, which are kept in their particular orientation by the secondary structure of the protein.     

The Crystal Structure of the [NiFe] Hydrogenase from the Photosynthetic Bacterium Allochromatium vinosum: Characterization of the Oxidized Enzyme (Ni-A State)

The crystal structure of the membrane-associated [NiFe] hydrogenase from Allochromatium vinosum has been determined to 2.1 Å resolution. Electron paramagnetic resonance (EPR) and Fourier transform infrared spectroscopy on dissolved crystals showed that it is present in the Ni-A state (> 90%). The structure of the A. vinosum [NiFe] hydrogenase shows significant similarities with [NiFe] hydrogenase structures derived from Desulfovibrio species. The amino acid sequence identity is ∼ 50%. The bimetallic [NiFe] active site is located in the large subunit of the heterodimer and possesses three diatomic non-protein ligands coordinated to the Fe (two CN⁻ , one CO). Ni is bound to the protein backbone via four cysteine thiolates; two of them also bridge the two metals. One of the bridging cysteines (Cys64) exhibits a modified thiolate in part of the sample. A mono-oxo bridging ligand was assigned between the metal ions of the catalytic center. This is in contrast to a proposal for Desulfovibrio sp. hydrogenases that show a di-oxo species in this position for the Ni-A state. The additional metal site located in the large subunit appears to be a Mg²⁺ ion. Three iron-sulfur clusters were found in the small subunit that forms the electron transfer chain connecting the catalytic site with the molecular surface. The calculated anomalous Fourier map indicates a distorted proximal iron-sulfur cluster in part of the crystals. This altered proximal cluster is supposed to be paramagnetic and is exchange coupled to the Ni³⁺ ion and the medial [Fe₃S₄]⁺ cluster that are both EPR active (S = 1/2 species). This finding of a modified proximal cluster in the [NiFe] hydrogenase might explain the observation of split EPR signals that are occasionally detected in the oxidized state of membrane-bound [NiFe] hydrogenases as from A. vinosum.     

A model system for [NiFe] hydrogenase maturation studies: Purification of an active site-containing hydrogenase large subunit without small subunit

The large subunit HoxC of the H2-sensing [NiFe] hydrogenase from Ralstonia eutropha was purified without its small subunit. Two forms of HoxC were identified. Both forms contained iron but only substoichiometric amounts of nickel. One form was a homodimer of HoxC whereas the second also contained the Ni-Fe site maturation proteins HypC and HypB. Despite the presence of the Ni-Fe active site in some of the proteins, both forms, which lack the Fe-S clusters normally present in hydrogenases, cannot activate hydrogen. The incomplete insertion of nickel into the Ni-Fe site provides direct evidence that Fe precedes Ni in the course of metal center assembly.     

Desulfovibrio desulfuricans iron hydrogenase: the structure shows unusual coordination to an active site Fe binuclear center.

BACKGROUND: Many microorganisms have the ability to either oxidize molecular hydrogen to generate reducing power or to produce hydrogen in order to remove low-potential electrons. These reactions are catalyzed by two unrelated enzymes: the Ni-Fe hydrogenases and the Fe-only hydrogenases. RESULTS: We report here the structure of the heterodimeric Fe-only hydrogenase from Desulfovibrio desulfuricans - the first for this class of enzymes. With the exception of a ferredoxin-like domain, the structure represents a novel protein fold. The so-called H cluster of the enzyme is composed of a typical [4Fe-4S] cubane bridged to a binuclear active site Fe center containing putative CO and CN ligands and one bridging 1, 3-propanedithiol molecule. The conformation of the subunits can be explained by the evolutionary changes that have transformed monomeric cytoplasmic enzymes into dimeric periplasmic enzymes. Plausible electron- and proton-transfer pathways and a putative channel for the access of hydrogen to the active site have been identified. CONCLUSIONS: The unrelated active sites of Ni-Fe and Fe-only hydrogenases have several common features: coordination of diatomic ligands to an Fe ion; a vacant coordination site on one of the metal ions representing a possible substrate-binding site; a thiolate-bridged binuclear center; and plausible proton- and electron-transfer pathways and substrate channels. The diatomic coordination to Fe ions makes them low spin and favors low redox states, which may be required for catalysis. Complex electron paramagnetic resonance signals typical of Fe-only hydrogenases arise from magnetic interactions between the [4Fe-4S] cluster and the active site binuclear center. The paucity of protein ligands to this center suggests that it was imported from the inorganic world as an already functional unit.     

Infrared studies of the CO-inhibited form of the Fe-only hydrogenase from Clostridium pasteurianum I: examination of its light sensitivity at cryogenic temperatures

Infrared spectroscopy has been used to examine the oxidized and CO-inhibited forms of Fe-only hydrogenase I from Clostridium pasteurianum. For the oxidized enzyme, five bands are detected in the infrared spectral region between 2100 and 1800 cm(-1). The pattern of infrared bands is consistent with the presence of two terminally coordinated carbon monoxide molecules, two terminally coordinated cyanide molecules, and one bridging carbon monoxide molecule, ligated to the Fe atoms of the active site [2Fe] subcluster. Infrared spectra of the carbon monoxide-inhibited state, prepared using both natural abundance CO and 13CO, indicate that the two terminally coordinated CO ligands that are intrinsic to the enzyme are coordinated to different Fe atoms of the active site [2Fe] subcluster. Irradiation of the CO-inhibited state at cryogenic temperatures gives rise to two species with dramatically different infrared spectra. The first species has an infrared spectrum identical to the spectrum of the oxidized enzyme, and can be assigned as arising from the photolysis of the exogenous CO from the active site. This species, which has been observed in X-ray crystallographic measurements [Lemon, B. J., and Peters, J. W. (2000) J. Am. Chem. Soc. 122, 3793], decays above 150 K. The second light-induced species decays above 80 K and is characterized by loss of the infrared band associated with the Fe bridging CO at 1809 cm(-1). Potential models for the second photolysis event are discussed.     

Photosensitivity of the Ni-A state of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F with visible light

[NiFe] hydrogenase catalyzes reversible oxidation of molecular hydrogen. Its active site is constructed of a hetero dinuclear Ni–Fe complex, and the oxidation state of the Ni ion changes according to the redox state of the enzyme. We found that the Ni-A state (an inactive unready, oxidized state) of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F (DvMF) is light sensitive and forms a new state (Ni-AL) with irradiation of visible light. The Fourier transform infrared (FT-IR) bands at 1956, 2084 and 2094 cm^?1 of the Ni-A state shifted to 1971, 2086 and 2098 cm^?1 in the Ni-AL state. The g-values of g_x = 2.30, g_y = 2.23 and g_z = 2.01 for the signals in the electron paramagnetic resonance (EPR) spectrum of the Ni-A state at room temperature varied for ?0.009, +0.012 and +0.010, respectively, upon light irradiation. The light-induced Ni-AL state converted back immediately to the Ni-A state under dark condition at room temperature. These results show that the coordination structure of the Fe site of the Ni-A state of [NiFe] hydrogenase is perturbed significantly by light irradiation with relatively small coordination change at the Ni site.     

The activation of the [NiFe]-hydrogenase from<Emphasis Type="Italic"> Allochromatium vinosum</Emphasis>. An infrared spectro-electrochemical study

The membrane-bound [NiFe]-hydrogenase from Allochromatium vinosum can occur in several inactive or active states. This study presents the first systematic infrared characterisation of the A. vinosum enzyme, with emphasis on the spectro-electrochemical properties of the inactive/active transition. This transition involves an energy barrier, which can be overcome at elevated temperatures. The reduced Ready enzyme can exist in two different inactive states, which are in an apparent acid–base equilibrium. It is proposed that a hydroxyl ligand in a bridging position in the Ni-Fe site is protonated and that the formed water molecule is subsequently removed. This enables the active site to bind hydrogen in a bridging position, allowing the formation of the fully active state of the enzyme. It is further shown that the active site in enzyme reduced by 1 bar H₂ can occur in three different electron paramagnetic resonance (EPR)-silent states with a different degree of protonation.Abbreviations BV benzyl viologen - MB methylene blue - MBH membrane-bound hydrogenase - SHE standard hydrogen electrode     

Reactivity of [Fe] and [Ni-Fe-Se] hydrogenases with their oxido-reduction partner: the tetraheme cytochrome c3.

In order to understand the electron transfer mechanisms for the [Fe] and [Ni-Fe] hydrogenases, a kinetic study of cytochrome c3 reduction has been undertaken. Cyclic voltammetry and controlled-potential amperometry techniques have been used to investigate the intermolecular electron-transfer reaction between cytochrome c3 and [Fe] hydrogenase from Desulfovibrio vulgaris Hildenborough. Electron-transfer cross-reactions between [Fe] or [Ni-Fe-Se] hydrogenase and cytochrome c3 from Desulfovibrio vulgaris Hildenborough or Desulfovibrio desulfuricans Norway have been studied. Some structural implications are considered from these experimental data.     

Redox interaction of cytochrome c3 with [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F

Cytochrome c3 isolated from a sulfate-reducing bacterium, Desulfovibrio vulgaris Miyazaki F, is a tetraheme protein. Its physiological partner, [NiFe] hydrogenase, catalyzes the reversible oxidoreduction of molecular hydrogen. To elucidate the mechanism of electron transfer between cytochrome c3 and [NiFe] hydrogenase, the transient complex formation by these proteins was investigated by means of NMR. All NH signals of uniformly 15N-labeled ferric cytochrome c3 except N-terminus, Pro, and Gly73 were assigned. 1H-15N HSQC spectra were recorded for 15N-labeled ferric and ferrous cytochrome c3, in the absence and presence of hydrogenase. Chemical shift perturbations were observed in the region around heme 4 in both oxidation states. Additionally, the region between hemes 1 and 3 in ferrous cytochrome c3 was affected in the presence of hydrogenase, suggesting that the mode of interaction is different in each redox state. Heme 3 is probably the electron gate for ferrous cytochrome c3. To investigate the transient complex of cytochrome c3 and hydrogenase in detail, modeling of the complex was performed for the oxidized proteins using a docking program, ZDOCK 2.3, and NMR data. Furthermore, the roles of lysine residues of cytochrome c3 in the interaction with hydrogenase were investigated by site-directed mutagenesis. When the lysine residues around heme 4 were replaced by an uncharged residue, methionine, one by one, the Km of the electron-transfer kinetics increased. The results showed that the positive charges of Lys60, Lys72, Lys95, and Lys101 around heme 4 are important for formation of the transient complex with [NiFe] hydrogenase in the initial stage of the cytochrome c3 reduction. This finding is consistent with the most possible structure of the transient complex obtained by modeling.     

Delivery of iron-sulfur clusters to the hydrogen-oxidizing [NiFe]-hydrogenases in Escherichia coli requires the A-type carrier proteins ErpA and IscA

During anaerobic growth Escherichia coli synthesizes two membrane-associated hydrogen-oxidizing [NiFe]-hydrogenases, termed hydrogenase 1 and hydrogenase 2. Each enzyme comprises a catalytic subunit containing the [NiFe] cofactor, an electron-transferring small subunit with a particular complement of [Fe-S] (iron-sulfur) clusters and a membrane-anchor subunit. How the [Fe-S] clusters are delivered to the small subunit of these enzymes is unclear. A-type carrier (ATC) proteins of the Isc (iron-sulfur-cluster) and Suf (sulfur mobilization) [Fe-S] cluster biogenesis pathways are proposed to traffic pre-formed [Fe-S] clusters to apoprotein targets. Mutants that could not synthesize SufA had active hydrogenase 1 and hydrogenase 2 enzymes, thus demonstrating that the Suf machinery is not required for hydrogenase maturation. In contrast, mutants devoid of the IscA, ErpA or IscU proteins of the Isc machinery had no detectable hydrogenase 1 or 2 activities. Lack of activity of both enzymes correlated with the absence of the respective [Fe-S]-cluster-containing small subunit, which was apparently rapidly degraded. During biosynthesis the hydrogenase large subunits receive their [NiFe] cofactor from the Hyp maturation machinery. Subsequent to cofactor insertion a specific C-terminal processing step occurs before association of the large subunit with the small subunit. This processing step is independent of small subunit maturation. Using western blotting experiments it could be shown that although the amount of each hydrogenase large subunit was strongly reduced in the iscA and erpA mutants, some maturation of the large subunit still occurred. Moreover, in contrast to the situation in Isc-proficient strains, these processed large subunits were not membrane-associated. Taken together, our findings demonstrate that both IscA and ErpA are required for [Fe-S] cluster delivery to the small subunits of the hydrogen-oxidizing hydrogenases; however, delivery of the Fe atom to the active site might have different requirements.     

[NiFe] hydrogenase from Desulfovibrio desulfuricans ATCC 27774: gene sequencing, three-dimensional structure determination and refinement at 1.8 Å and modelling studies of its interaction with the tetrahaem cytochrome c 3

The primary and three-dimensional structures of a [NiFe] hydrogenase isolated from D. desulfitricans ATCC 27774 were determined, by nucleotide analysis and single-crystal X-ray crystallography. The three-dimensional structural model was refined to R=0.167 and Rfree=0.223 using data to 1.8 A resolution. Two unique structural features are observed: the [4Fe-4S] cluster nearest the [NiFe] centre has been modified [4Fe-3S-3O] by loss of one sulfur atom and inclusion of three oxygen atoms; a three-fold disorder was observed for Cys536 which binds to the nickel atom in the [NiFe] centre. Also, the bridging sulfur atom that caps the active site was found to have partial occupancy, thus corresponding to a partly activated enzyme. These structural features may have biological relevance. In particular, the two less-populated rotamers of Cys536 may be involved in the activation process of the enzyme, as well as in the catalytic cycle. Molecular modelling studies were carried out on the interaction between this [NiFe] hydrogenase and its physiological partner, the tetrahaem cytochrome c3 from the same organism. The lowest energy docking solutions were found to correspond to an interaction between the haem IV region in tetrahaem cytochrome c3 with the distal [4Fe-4S] cluster in [NiFe] hydrogenase. This interaction should correspond to efficient electron transfer and be physiologically relevant, given the proximity of the two redox centres and the fact that electron transfer decay coupling calculations show high coupling values and a short electron transfer pathway. On the other hand, other docking solutions have been found that, despite showing low electron transfer efficiency, may give clues on possible proton transfer mechanisms between the two molecules.