Properties and structure of the soluble ferredoxin from Synechococcus 6301 (Anacystis nidulans). Relationship to gene sequences.

Photoautotrophic cultures of the unicellular cyanobacterium Synechococcus 6301 (Anacystis nidulans) possessed a single [2Fe-2S] ferredoxin with a midpoint redox potential of -385 mV. Determination of the amino acid sequence of the ferredoxin showed that it consisted of 98 residues, with methionine and tryptophan both absent, and with only the four cysteine residues that are required to co-ordinate the iron-sulphur cluster. Comparisons with other ferredoxin sequences showed that most resemblance was to those from filamentous cyanobacteria, with up to 87% homology. There was less resemblance to the ferredoxins of unicellular cyanobacteria, with 25 differences when compared with that from another Synechococcus sp. However, the sequence of Synechococcus 6301 ferredoxin was identical with that derived for a gene sequence for a putative ferredoxin from the genotypically closely related Synechococcus 7942 (Anacystis nidulans R2). In contrast, the sequence showed substantial differences from that corresponding to a putative ferredoxin gene from Synechococcus 6301 reported by Cozens & Walker [(1988) Biochem. J. 252, 563-569].     

Amino acid sequence of [2Fe-2S] ferredoxin from Clostridium pasteurianum

The complete amino acid sequence of the [2Fe-2S] ferredoxin from the saccharolytic anaerobe Clostridium pasteurianum has been determined by automated Edman degradation of the whole protein and of peptides obtained by tryptic and by staphylococcal protease digestion. The polypeptide chain consists of 102 amino acids, including 5 cysteine residues in positions 11, 14, 24, 56, and 60. The sequence has been analyzed for hydrophilicity and for secondary structure predictions. In its native state the protein is a dimer, each subunit containing one [2Fe-2S] cluster, and it has a molecular weight of 23,174, including the four iron and inorganic sulfur atoms. The extinction coefficient of the native protein is 19,400 M-1 cm-1 at 463 nm. The positions of the cysteine residues, four of which are most probably the ligands of the [2Fe-2S] cluster, on the polypeptide chain of this protein are very different from those found in other [2Fe-2S] proteins, and in other ferredoxins in general. In addition, whole sequence comparisons of the [2Fe-2S] ferredoxin from C. pasteurianum with a number of other ferredoxins did not reveal any significant homologies. The likely occurrence of several phylogenetically unrelated ferredoxin families is discussed in the light of these observations.     

Amino acid sequence of the [4Fe-4S] ferredoxin isolated from Desulfovibrio desulfuricans Norway

The complete amino acid sequence of the [4Fe-4S] ferredoxin from Desulfovibrio desulfuricans Norway was determined by repetitive Edman degradation of the whole protein and peptides derived from tryptic digestion. The protein has 59 residues. Four of the six cysteine residues are involved in the binding of the [4Fe-4S] cluster in the same arrangement as in clostridial ferredoxins. This sequence is compared to various Desulfovibrio ferredoxin sequences and to the sequence and three-dimensional structure of Peptococcus aerogenes ferredoxin. Evidence of gene duplication is indicated. The requirement of some sequence features in the ferredoxin for an interaction process with its electron transfer partner, cytochrome c3, is postulated in the discussion.     

Characterization and cloning of an extremely thermostable, Pyrococcus furiosus-type 4Fe ferredoxin from Thermococcus profundus.

An extremely thermostable [4Fe-4S] ferredoxin was isolated under anaerobic conditions from a hyperthermophilic archaeon Thermococcus profundus, and the ferredoxin gene was cloned and sequenced. The nucleotide sequence of the ferredoxin gene shows the ferredoxin to comprise 62 amino acid residues with a sequence similar to those of many bacterial and archaeal 4Fe (3Fe) ferredoxins. The unusual Fe-S cluster type, which was identified in the resonance Raman and EPR spectra, has three cysteines and one aspartate as the cluster ligands, as in the Pyrococcus furiosus 4Fe ferredoxin. Under aerobic conditions, a ferredoxin was purified that contains a [3Fe-4S] cluster as the major Fe-S cluster and a small amount of the [4Fe-4S] cluster. Its N-terminal amino acid sequence is the same as that of the anaerobically-purified ferredoxin up to the 26th residue. These results indicate that the 4Fe ferredoxin was degraded to 3Fe ferredoxin during aerobic purification. The aerobically-purified ferredoxin was reversibly converted back to the [4Fe-4S] ferredoxin by the addition of ferrous ions under reducing conditions. The anaerobically-purified [4Fe-4S] ferredoxin is quite stable; little degradtion was observed over 20 h at 100 degrees C, while the half-life of the aerobically-purified ferredoxin is 10 h at 100 degrees C. Both the anaerobically- and aerobically-purified ferredoxins were found to function as electron acceptors for the pyruvate-ferredoxin oxidoreductase purified from the same archaeon.     

Two distinct ferredoxins from Rhodobacter capsulatus: complete amino acid sequences and molecular evolution

Two distinct ferredoxins were purified from Rhodobacter capsulatus SB1003. Their complete amino acid sequences were determined by a combination of protease digestion, BrCN cleavage and Edman degradation. Ferredoxins I and II were composed of 64 and 111 amino acids, respectively, with molecular weights of 6,728 and 12,549 excluding iron and sulfur atoms. Both contained two Cys clusters in their amino acid sequences. The first cluster of ferredoxin I and the second cluster of ferredoxin II had a sequence, CxxCxxCxxxCP, in common with the ferredoxins found in Clostridia. The second cluster of ferredoxin I had a sequence, CxxCxxxxxxxxCxxxCM, with extra amino acids between the second and third Cys, which has been reported for other photosynthetic bacterial ferredoxins and putative ferredoxins (nif-gene products) from nitrogen-fixing bacteria, and with a unique occurrence of Met. The first cluster of ferredoxin II had a CxxCxxxxCxxxCP sequence, with two additional amino acids between the second and third Cys, a characteristics feature of Azotobacter-[3Fe-4S] [4Fe-4S]-ferredoxin. Ferredoxin II was also similar to Azotobacter-type ferredoxins with an extended carboxyl (C-) terminal sequence compared to the common Clostridium-type. The evolutionary relationship of the two together with a putative one recently found to be encoded in nifENXQ region in this bacterium [Moreno-Vivian et al. (1989) J. Bacteriol. 171, 2591-2598] is discussed.     

Primary structure of xylene monooxygenase: similarities to and differences from the alkane hydroxylation system.

Xylene monooxygenase, encoded by the TOL plasmid of Pseudomonas putida, catalyzes the oxidation of toluene and xylenes and consists of two different subunits encoded by xylA and xylM. In this study, the complete nucleotide sequences of these genes were determined and the amino acid sequences of the xylA and xylM products were deduced. The XylM sequence had a 25% homology with alkane hydroxylase, which catalyzes the omega-hydroxylation of fatty acids and the terminal hydroxylation of alkanes. The sequence of the first 90 amino acids of XylA exhibited a strong similarity to the sequence of chloroplast-type ferredoxins, whereas the rest of the XylA sequence resembled that of ferredoxin-NADP+ reductases. Based on this information, the structure and function of xylene monooxygenase were deduced. XylM may be a catalytic component for the hydroxylation of the carbon side chain of toluene and xylenes and, as is the alkane hydroxylase protein, may be a membrane-bound protein containing ferrous ion as a prosthetic group. XylA may have two domains consisting of an N-terminal region similar to chloroplast-type ferredoxins and a C-terminal region similar to ferredoxin-NADP+ reductases. The ferredoxin portion of XylA may contain a [2Fe-2S] cluster and reduce the oxidized form of the XylM hydroxylase. The activity determined by the C-terminal region of the XylA sequence may be the reduction of the oxidized form of ferredoxin by concomitant oxidation of NADH.     

Cloning, sequencing, and overexpression of a [2Fe-2S] ferredoxin gene from Escherichia coli.

Escherichia coli contains a soluble, [2Fe-2S] ferredoxin of unknown function (Knoell, H.-E., and Knappe, J. (1974) Eur. J. Biochem. 50, 245-252). Using antiserum to the purified protein to screen E. coli genomic expression libraries, we have cloned a gene (designated fdx) encoding this protein. The DNA sequence of the gene predicts a polypeptide of 110 residues after removal of the initiator methionine (polypeptide M(r) = 12,186, holoprotein M(r) = 12,358). The deduced amino acid sequence is strikingly similar to those of the ferredoxins found in animal mitochondria which function with cytochrome P450 enzymes and to the ferredoxin from Pseudomonas putida which functions with P450cam. The overall sequence identity is approximately 36% when compared with human mitochondrial and P. putida ferredoxins, and the identities include 4 cysteine residues proposed to coordinate the iron cluster. The protein was overproduced approximately 500-fold using an expression plasmid, and the holoprotein was assembled and accumulated in amounts exceeding 30% of the total cell protein. The overexpressed ferredoxin exhibits absorption, circular dichroism, and electron paramagnetic resonance spectra closely resembling those of the animal ferredoxins and P. putida ferredoxin.     

Unusual spectroscopic and electrochemical properties of the 2[4Fe-4S] ferredoxin of Thauera aromatica

A reduced ferredoxin serves as the natural electron donor for key enzymes of the anaerobic aromatic metabolism in the denitrifying bacterium Thauera aromatica. It contains two [4Fe-4S] clusters and belongs to the Chromatium vinosum type of ferredoxins (CvFd) which differ from the "clostridial" type by a six-amino acid insertion between two successive cysteines and a C-terminal alpha-helical amino acid extension. The electrochemical and electron paramagnetic resonance (EPR) spectroscopic properties of both [4Fe-4S] clusters from T. aromatica ferredoxin have been investigated using cyclic voltammetry and multifrequency EPR. Results obtained from cyclic voltammetry revealed the presence of two redox transitions at -431 and -587 mV versus SHE. X-band EPR spectra recorded at potentials where only one cluster was reduced (greater than -500 mV) indicated the presence of a spin mixture of S = (3)/(2) and (5)/(2) spin states of one reduced [4Fe-4S] cluster. No typical S = (1)/(2) EPR signals were observed. At lower potentials (less than -500 mV), the more negative [4Fe-4S] cluster displayed Q-, X-, and S-band EPR spectra at 20 K which were typical of a single S = (1)/(2) low-spin [4Fe-4S] cluster with a g(av) of 1.94. However, when the temperature was decreased stepwise to 4 K, a magnetic interaction between the two clusters gradually became observable as a temperature-dependent splitting of both the S = (1)/(2) and S = (5)/(2) EPR signals. At potentials where both clusters were reduced, additional low-field EPR signals were observed which can only be assigned to spin states with spins of >(5)/(2). The results that were obtained establish that the common typical amino acid sequence features of CvFd-type ferredoxins determine the unusual electrochemical properties of the [4Fe-4S] clusters. The observation of different spin states in T. aromatica ferredoxin is novel among CvFd-type ferredoxins.     

Amino acid sequence of a four-iron-four-sulphur ferredoxin isolated from Bacillus stearothermophilus.

1. The primary structure of a 4Fe-4S ferredoxin from Bacillus stearothermophilus was determined and shown to consist of a single polypeptide chain of 81 amino acid residues. The molecular weight of the holoprotein is about 9120. 2. There are only four cysteine residues in the molecule; three of these are located near the N-terminus as a Cys-X-X-Cys-X-X-Cys segment, and the fourth cysteine residue is followed by a proline and located in the C-terminal half. 3. The Fe-S chromophore in B. stearothermophilus ferredoxin was previously well characterized and was shown to consist of a single 4Fe-4S cluster. This ferredoxin sequence establishes for the first time the relative location of the four cysteine residues necessary to bind the 4Fe-4S cluster of a 4Fe ferredoxin, and is in agreement with the criteria for the relative positions of the cysteines proposed from X-ray-crystallographic studies on an 8Fe (two 4Fe-4S clusters) ferredoxin. 4. The sequence of B. stearothermophilus ferredoxin is homologous in many segments to that of other bacterial ferredoxins, the degree of homology being greater towards ferredoxins from Desulfovibrio gigas and photosynthetic bacteria than to Clostridial ferredoxins. 5. The presence of a relatively higher number of glutamic acid and lower number of cysteine residues in the molecule may explain the greater thermal stability and oxygen-insenstivity of this ferredoxin.     

Determination of nonligand amino acids critical to [4Fe-4S]2+/+ assembly in ferredoxin maquettes.

The prototype ferredoxin maquette, FdM, is a 16-amino acid peptide which efficiently incorporates a single [4Fe-4S]2+/+ cluster with spectroscopic and electrochemical properties that are typical of natural bacterial ferredoxins. Using this synthetic protein scaffold, we have investigated the role of the nonliganding amino acids in the assembly of the iron-sulfur cluster. In a stepwise fashion, we truncated FdM to a seven-amino acid peptide, FdM-7, which incorporates a cluster spectroscopically identical to FdM but in lower yield, 29% relative to FdM. FdM-7 consists solely of the. CIACGAC. consensus ferredoxin core motif observed in natural protein sequences. Initially, all of the nonliganding amino acids were substituted for either glycine, FdM-7-PolyGly (.CGGCGGC.), or alanine, FdM-7-PolyAla (.CAACAAC.), on the basis of analysis of natural ferredoxin sequences. Both FdM-7-PolyGly and FdM-7-PolyAla incorporated little [4Fe-4S]2+/+ cluster, 6 and 7%, respectively. A systematic study of the incorporation of a single isoleucine into each of the four nonliganding positions indicated that placement either in the second or in the sixth core motif positions,.CIGCGGC. or.CGGCGIC., restored the iron-sulfur cluster binding capacity of the peptides to the level of FdM-7. Incorporation of an isoleucine into the fifth position,.CGGCIGC., which in natural ferredoxins is predominantly occupied by a glycine, resulted in a loss of [4Fe-4S] affinity. The substitution of leucine, tryptophan, and arginine into the second core motif position illustrated the stabilization of the [4Fe-4S] cluster by bulky hydrophobic amino acids. Furthermore, the incorporation of a single isoleucine into the second core motif position in a 16-amino acid ferredoxin maquette resulted in a 5-fold increase in the level of [4Fe-4S] cluster binding relative to that of the glycine variant. The protein design rules derived from this study are fully consistent with those derived from natural ferredoxin sequence analysis, suggesting they are applicable to both the de novo design and structure-based redesign of natural proteins.     

Expression cloning of a sheep adreno-ferredoxin using the polymerase chain reaction.

In addition to the selective amplification of cDNA from total RNA by the PCR method, the distinctive properties of ferredoxin-expressing colonies can be used for cloning a ferredoxin cDNA. This strategy for cloning and expressing cDNA in E. coli was applied to a sheep adreno-ferredoxin. The expressed sheep ferredoxin showed a spectral pattern typical of [2Fe-2S] proteins. The amino acid sequence deduced from the DNA sequence showed that the mature form of sheep ferredoxin consists of 128 amino acid residues. This rapid and simple method for cloning and expressing cDNA can be applied to other ferredoxins.     

Structure-function relationship of [2Fe2S] ferredoxins and design of a model molecule

[2Fe2S] ferredoxins isolated from various plants and algae comprise 93–99 amino acid residues and resemble each other not only in sequences, but also in physiological functions. One of them isolated from Spirulina platensis was subjected to X-ray analysis and its three dimensional structure is now known. [2Fe2S] ferredoxins of a different type are found in halobacteria and comprise 128 amino acid residues. Both types of the [2Fe2S] ferredoxins exhibit low redox potentials. By comparing the amino acid sequences of 28 [2Fe2S] ferredoxins and the tertiary structure of S. platensis ferredoxin we predicted a common three-dimensional structure to the [2Fe2S] ferredoxins and proposed a molecular surface area to be interacting with FNR. An artificial small molecule composed of 20 amino acid residues is designed on the basis of the tertiary structure of S. platensis ferredoxin. The amino acid sequence was predicted to be ProTyrSerCysArgAlaGlyAlaCysSerThrCysAlaGly ProLeuLeuThr CysVal which should have a [2Fe2S] cluster with a low redox potential     

Purification, properties and complete amino acid sequence of the ferredoxin from a green alga, Chlamydomonas reinhardtii

The ferredoxin was purified from the green alga, Chlamydomonas reinhardtii. The protein showed typical absorption and circular dichroism spectra of a [2Fe-2S] ferredoxin. When compared with spinach ferredoxin, the C. reinhardtii protein was less effective in the catalysis of NADP+ photoreduction, but its activity was higher in the light activation of C. reinhardtii malate dehydrogenase (NADP). The complete amino acid sequence was determined by automated Edman degradation of the whole protein and of peptides obtained by trypsin and chymotrypsin digestions and by CNBr cleavage. The protein consists of 94 residues, with Tyr at both NH2 and COOH termini. The positions of the four cysteines binding the two iron atoms are similar to those found in other [2Fe-2S] ferredoxins. The primary structure of C. reinhardtii ferredoxin showed a great homology (about 80%) with ferredoxins from two other green algae.     

Structure of [4Fe-4S] ferredoxin from Bacillus thermoproteolyticus refined at 2.3 A resolution. Structural comparisons of bacterial ferredoxins

The structure of a low-potential ferredoxin isolated from Bacillus thermoproteolyticus has been refined by a restrained least-squares method. The final crystallographic R factor is 0.204 for 2906 reflections with F greater than 3 sigma F in the 6.0 to 2.3 A resolution range. The model contains 81 amino acid residues, one [4Fe-4S] cluster, and 59 water molecules. The root-mean-square deviation from ideal values for bond lengths is 0.018 A, and the mean coordinate error is estimated to be 0.25 A. The present ferredoxin is similar in the topology of the polypeptide backbone to the dicluster-type ferredoxins from Peptococcus aerogenes and Azotobacter vinelandii, but has considerable insertions and deletions of the peptide segments as well as different secondary structures. Although all but the C-terminal C zeta atoms of P. aerogenes ferredoxin superpose on the C alpha atoms of A. vinelandii ferredoxin, only 60% superpose on the C alpha atoms of B. thermoproteolyticus ferredoxin, with a root-mean-square distance of 0.82 A for each pair. The conformations of the peptide segments surrounding the [4Fe-4S] clusters in these three ferredoxins are all conserved. Moreover, the schemes for the NH...S hydrogen bonds in these ferredoxins are nearly identical. The site of the aromatic ring of Tyr27 in B. thermoproteolyticus ferredoxin is close spatially to that of Tyr28 in P. aerogenes ferredoxin with reference to the cluster, but these residues do not correspond in the spatial alignment of their polypeptide backbones. We infer that in monocluster-type ferredoxins, the side-chain at the 27th residue has a crucial effect on the stability of the cluster. Of the four cysteine residues that bind to the second Fe-S cluster in the dicluster-type ferredoxins, two are conserved in the monocluster-type ferredoxins from Desulfovibrio gigas. D. desulfuricans Norway, and Clostridium thermoaceticum. The tertiary structure of B. thermoproteolyticus ferredoxin suggests that in such monocluster-type ferredoxins these two cysteine residues, which in it correspond to Ala21 and Asp53, form a disulfide bridge.     

Synthesis of the Caulobacter ferredoxin protein, FdxA, is cell cycle controlled.

The fdxA gene was identified upstream of and in the opposite direction from the Caulobacter crescentus cysC gene. Analyses of the nucleotide sequence and the deduced amino acid sequence of the fdxA gene demonstrated that it encodes a ferredoxin with a molecular mass of 12,080 Da. This ferredoxin has common structural features with ferredoxins that contain a [3Fe-4S] and a [4Fe-4S] cluster, including seven conserved cysteines responsible for the binding of the two clusters. A mutation in the fdxA gene was obtained, and the resulting strain did not produce one of the two ferredoxins (FdI) found in C. crescentus. Further experiments demonstrated that the fdxA gene is temporally expressed in C. crescentus and that FdI is required for completion of the cell cycle at 37 degrees C.     

Characterization of the genome region encoding an fdxH-type ferredoxin and a new 2[4Fe-4S] ferredoxin from the nonheterocystous, nitrogen-fixing cyanobacterium Plectonema boryanum PCC 73110.

A genomic DNA region with four consecutive open reading frames, including an fdxH-type gene, has been sequenced and initially characterized for the nonheterocystous nitrogen-fixing cyanobacterium Plectonema boryanum PCC 73110. The fdxH gene encodes a [2Fe-2S]-type ferredoxin, 98 amino acids in length, with a deduced molecular mass of 10.9 kDa. Conserved residues include two characteristic lysines at positions 10 and 11, shown recently to be important for interaction with nitrogenase reductase (S. Schmitz, B. Schrautermeier, and H. Böhme, Mol. Gen. Genet. 240:455-460, 1993). The gene is transcribed only under anaerobic nitrogenase-inducing conditions, whereas the Plectonema petF gene, encoding a different (type 1) [2Fe-2S] ferredoxin, is only transcribed in cultures growing with combined nitrogen. The fdxH gene was expressed in Escherichia coli as a holoprotein. The purified protein was able to effectively donate electrons to cyanobacterial nitrogenase, whereas PetF from the same organism was not. The occurrence of FdxH in the nonheterocystous genus Plectonema demonstrates for the first time that FdxH-type ferredoxins are not exclusively expressed within heterocysts, as is true for cyanobacteria differentiating these cells for nitrogen fixation under aerobic growth conditions. Two open reading frames that precede fdxH have high similarity to those found at a corresponding location in Anabaena sp. strain PCC 7120. In the latter organism, they are transcribed only under nitrogen-fixing conditions, but the functions of their gene products remain unclear (D. Borthakur, M. Basche, W. J. Buikema, P. B. Borthakur, and R. Haselkorn, Mol. Gen. Genet. 221:227-234, 1990). An fdxB-type gene encoding a 2[4Fe-4S] ferredoxin not previously identified in cyanobacteria is located immediately downstream of fdxH in P. boryanum.     

Ferredoxins from two sulfonylurea herbicide monooxygenase systems in Streptomyces griseolus.

We have purified and characterized two ferredoxins, designated Fd-1 and Fd-2, from the soluble protein fraction of sulfonylurea herbicide induced Streptomyces griseolus. These cells have previously been shown to contain two inducible cytochromes P-450, P-450SU1 (CYP105A1) and P-450SU2 (CYP105B1), responsible for herbicide metabolism [O'Keefe, D. P., Romesser, J. A., & Leto, K. J. (1988) Arch. Microbiol. 149, 406-412]. Although Fd-2 is more effective, either ferredoxin can restore sulfonylurea monooxygenase activity to an aerobic mixture of NADPH, spinach ferredoxin:NADP oxidoreductase, purified cytochrome P-450SU1, and herbicide substrate. The gene for Fd-1 is located in the genome just downstream of the gene for cytochrome P-450SU1; the gene for Fd-2 follows the gene for P-450SU2. The deduced amino acid sequences of the two ferredoxins show that, if monomeric, each has a molecular mass of approximately 7 kDa, and alignment of the two sequences demonstrates that they are approximately 52% positionally identical. The spectroscopic properties and iron and acid-labile sulfide contents of both ferredoxins suggest that, as isolated, each contains a single [3Fe-4S] cluster. The presence of only three cysteines in Fd-1 and comparisons with three [4Fe-4S] ferredoxins with high sequence similarity suggest that both Fd-1 and Fd-2 have an alanine in the position where these [4Fe-4S] proteins have a fourth cysteine ligand to the cluster. Transformation of Streptomyces lividans, a strain unable to metabolize sulfonylureas, with DNA encoding both P-450SU1 and Fd-1 results in cells capable of herbicide metabolism. S. lividans transformants encoding only cytochrome P-450SU1 do not metabolize herbicide.(ABSTRACT TRUNCATED AT 250 WORDS)