Amino acid sequence of a four-iron-four-sulphur ferredoxin isolated from Bacillus stearothermophilus.

1. The primary structure of a 4Fe-4S ferredoxin from Bacillus stearothermophilus was determined and shown to consist of a single polypeptide chain of 81 amino acid residues. The molecular weight of the holoprotein is about 9120. 2. There are only four cysteine residues in the molecule; three of these are located near the N-terminus as a Cys-X-X-Cys-X-X-Cys segment, and the fourth cysteine residue is followed by a proline and located in the C-terminal half. 3. The Fe-S chromophore in B. stearothermophilus ferredoxin was previously well characterized and was shown to consist of a single 4Fe-4S cluster. This ferredoxin sequence establishes for the first time the relative location of the four cysteine residues necessary to bind the 4Fe-4S cluster of a 4Fe ferredoxin, and is in agreement with the criteria for the relative positions of the cysteines proposed from X-ray-crystallographic studies on an 8Fe (two 4Fe-4S clusters) ferredoxin. 4. The sequence of B. stearothermophilus ferredoxin is homologous in many segments to that of other bacterial ferredoxins, the degree of homology being greater towards ferredoxins from Desulfovibrio gigas and photosynthetic bacteria than to Clostridial ferredoxins. 5. The presence of a relatively higher number of glutamic acid and lower number of cysteine residues in the molecule may explain the greater thermal stability and oxygen-insenstivity of this ferredoxin.     

The protein responsible for center A/B in spinach photosystem I: isolation with iron-sulfur cluster(s) and complete sequence analysis

The 9 kDa polypeptide from spinach photosystem I (PS I) complex was isolated with iron-sulfur cluster(s) by an n-butanol extraction procedure under anaerobic conditions. The polypeptide was soluble in a saline solution and contained non-heme irons and inorganic sulfides. The absorption spectrum of this iron-sulfur protein was very similar to those of bacterial-type ferredoxins. The amino acid sequence of the polypeptide was determined by using a combination of gas-phase sequencer and conventional procedures. It was composed of 80 amino acid residues giving a molecular weight of 8,894, excluding iron and sulfur atoms. The sequence showed the typical distribution of cysteine residues found in bacterial-type ferredoxins and was highly homologous (91% homology) to that deduced from the chloroplast gene, frxA, of liverwort, Marchantia polymorpha. The 9 kDa polypeptide is considered to be the iron-sulfur protein responsible for the electron transfer reaction in PS I from center X to [2Fe-2S] ferredoxin, namely a polypeptide with center(s) A and/or B in PS I complex. It is noteworthy that the 9 kDa polypeptide was rather hydrophilic and a little basic in terms of the primary structure. A three-dimensional structure was simulated on the basis of the tertiary structure of Peptococcus aerogenes [8Fe-8S] ferredoxin, and the portions in the molecule probably involved in contacting membranes or other polypeptides were indicated. The phylogenetic implications of the structure of the present polypeptide as compared with those of several bacterial-type ferredoxins are discussed.     

Cloning, sequencing, and overexpression of a [2Fe-2S] ferredoxin gene from Escherichia coli.

Escherichia coli contains a soluble, [2Fe-2S] ferredoxin of unknown function (Knoell, H.-E., and Knappe, J. (1974) Eur. J. Biochem. 50, 245-252). Using antiserum to the purified protein to screen E. coli genomic expression libraries, we have cloned a gene (designated fdx) encoding this protein. The DNA sequence of the gene predicts a polypeptide of 110 residues after removal of the initiator methionine (polypeptide M(r) = 12,186, holoprotein M(r) = 12,358). The deduced amino acid sequence is strikingly similar to those of the ferredoxins found in animal mitochondria which function with cytochrome P450 enzymes and to the ferredoxin from Pseudomonas putida which functions with P450cam. The overall sequence identity is approximately 36% when compared with human mitochondrial and P. putida ferredoxins, and the identities include 4 cysteine residues proposed to coordinate the iron cluster. The protein was overproduced approximately 500-fold using an expression plasmid, and the holoprotein was assembled and accumulated in amounts exceeding 30% of the total cell protein. The overexpressed ferredoxin exhibits absorption, circular dichroism, and electron paramagnetic resonance spectra closely resembling those of the animal ferredoxins and P. putida ferredoxin.     

Amino acid sequence of the [4Fe-4S] ferredoxin isolated from Desulfovibrio desulfuricans Norway

The complete amino acid sequence of the [4Fe-4S] ferredoxin from Desulfovibrio desulfuricans Norway was determined by repetitive Edman degradation of the whole protein and peptides derived from tryptic digestion. The protein has 59 residues. Four of the six cysteine residues are involved in the binding of the [4Fe-4S] cluster in the same arrangement as in clostridial ferredoxins. This sequence is compared to various Desulfovibrio ferredoxin sequences and to the sequence and three-dimensional structure of Peptococcus aerogenes ferredoxin. Evidence of gene duplication is indicated. The requirement of some sequence features in the ferredoxin for an interaction process with its electron transfer partner, cytochrome c3, is postulated in the discussion.     

Structural similarities between the N-terminal domain of Clostridium pasteurianum hydrogenase and plant-type ferredoxins

An N-terminal domain of Clostridium pasteurianum hydrogenase I, encompassing 76 residues out of the 574 composing the full-size enzyme, had previously been overproduced in Escherichia coli and shown to form a stable fold around a [2Fe-2S] cluster. This domain displays only marginal sequence similarity with [2Fe-2S] proteins of known structure, and therefore, two-dimensional 1H NMR has been implemented to elucidate features of the polypeptide fold. Despite the perturbing presence of the paramagnetic [2Fe-2S] cluster, 57 spin systems were detected in the TOCSY spectra, 52 of which were sequentially assigned through NOE connectivities. Several secondary structure elements were identified. The N terminus of the protein consists of two antiparallel beta strands followed by an alpha helix contacting both strands. Two additional antiparallel beta strands, one of them at the C terminus of the sequence, form a four-stranded beta sheet together with the two N-terminal strands. The proton resonances that can be attributed to this beta2alphabeta2 structural motif undergo no paramagnetic perturbations, suggesting that it is distant from the [2Fe-2S] cluster. In plant- and mammalian-type ferredoxins, a very similar structural pattern is found in the part of the protein farthest from the [2Fe-2S] cluster. This indicates that the N-terminal domain of C. pasteurianum hydrogenase folds in a manner very similar to those of plant- and mammalian-type ferredoxins over a significant part (ca. 50%) of its structure. Even in the vicinity of the metal site, where 1H NMR data are blurred by paramagnetic interactions, the N-terminal domains of hydrogenase and mammalian- and plant-type ferredoxins most likely display significant structural similarity, as inferred from local sequence alignments and from previously reported circular dichroism and resonance Raman spectra. These data afford structural information on a kind of [2Fe-2S] cluster-containing domain that occurs in a number of redox enzymes and complexes. In addition, together with previously published sequence alignments, they highlight the widespread distribution of the plant-type ferredoxin fold in bioenergetic systems encompassing anaerobic metabolism, photosynthesis, and aerobic respiratory chains.     

Structure of [4Fe-4S] ferredoxin from Bacillus thermoproteolyticus refined at 2.3 A resolution. Structural comparisons of bacterial ferredoxins

The structure of a low-potential ferredoxin isolated from Bacillus thermoproteolyticus has been refined by a restrained least-squares method. The final crystallographic R factor is 0.204 for 2906 reflections with F greater than 3 sigma F in the 6.0 to 2.3 A resolution range. The model contains 81 amino acid residues, one [4Fe-4S] cluster, and 59 water molecules. The root-mean-square deviation from ideal values for bond lengths is 0.018 A, and the mean coordinate error is estimated to be 0.25 A. The present ferredoxin is similar in the topology of the polypeptide backbone to the dicluster-type ferredoxins from Peptococcus aerogenes and Azotobacter vinelandii, but has considerable insertions and deletions of the peptide segments as well as different secondary structures. Although all but the C-terminal C zeta atoms of P. aerogenes ferredoxin superpose on the C alpha atoms of A. vinelandii ferredoxin, only 60% superpose on the C alpha atoms of B. thermoproteolyticus ferredoxin, with a root-mean-square distance of 0.82 A for each pair. The conformations of the peptide segments surrounding the [4Fe-4S] clusters in these three ferredoxins are all conserved. Moreover, the schemes for the NH...S hydrogen bonds in these ferredoxins are nearly identical. The site of the aromatic ring of Tyr27 in B. thermoproteolyticus ferredoxin is close spatially to that of Tyr28 in P. aerogenes ferredoxin with reference to the cluster, but these residues do not correspond in the spatial alignment of their polypeptide backbones. We infer that in monocluster-type ferredoxins, the side-chain at the 27th residue has a crucial effect on the stability of the cluster. Of the four cysteine residues that bind to the second Fe-S cluster in the dicluster-type ferredoxins, two are conserved in the monocluster-type ferredoxins from Desulfovibrio gigas. D. desulfuricans Norway, and Clostridium thermoaceticum. The tertiary structure of B. thermoproteolyticus ferredoxin suggests that in such monocluster-type ferredoxins these two cysteine residues, which in it correspond to Ala21 and Asp53, form a disulfide bridge.     

An Isc-type extremely thermostable [2Fe-2S] ferredoxin from Aquifex aeolicus. Biochemical,spectroscopic, and unfolding studies

Analysis of the genome of the hyperthermophilic bacterium Aquifex aeolicus has revealed the presence of a previously undetected gene potentially encoding a plant- and mammalian-type [2Fe-2S] ferredoxin. Expression of that gene in Escherichia coli has yielded a novel thermostable [2Fe-2S] ferredoxin (designated ferredoxin 5) whose sequence is most similar to those of ferredoxins involved in the assembly of iron-sulfur clusters (Isc-Fd). It nevertheless differs from the latter proteins by having deletions near its N- and C-termini, and no cysteine residues other than those involved in [2Fe-2S] cluster coordination. Resonance Raman, low-temperature MCD and EPR studies show close spectral similarities between ferredoxin 5 and the Isc-Fd from Azotobacter vinelandii. M?ssbauer spectra of the reduced protein were analyzed with an S = 1/2 spin Hamiltonian and interpreted in the framework of the ligand field model proposed by Bertrand and Gayda. The redox potential of A. aeolicus ferredoxin 5 (-390 mV) is in keeping with its relatedness to Isc-Fd. Unfolding experiments showed that A. aeolicus ferredoxin 5 is highly thermostable (T(m) = 106 degrees C at pH 7), despite being devoid of features (e.g., high content of charged residues) usually associated with extreme thermal stability. Searches for genes potentially encoding plant-type [2Fe-2S] ferredoxins have been performed on the sequenced genomes of hyperthermophilic organisms. None other than the two proteins from A. aeolicus were retrieved, indicating that this otherwise widely distributed group of proteins is barely represented among hyperthermophiles.     

Sequence, assembly and evolution of a primordial ferredoxin from Thermotoga maritima.

A gene coding for the ferredoxin of the primordial, strictly anaerobic and hyperthermophilic bacterium Thermotoga maritima was cloned, sequenced and expressed in Escherichia coli. The ferredoxin gene encodes a polypeptide of 60 amino acids that incorporates a single 4Fe-4S cluster. T. maritima ferredoxin expressed in E. coli is a heat-stable, monomeric protein, the spectroscopic properties of which show that its 4Fe-4S cluster is correctly assembled within the mesophilic host, and that it remains stable during purification under aerobic conditions. Removal of the iron-sulfur cluster results in an apo-ferredoxin that has no detectable secondary structure. This observation indicates that in vivo formation of the ferredoxin structure is coupled to the insertion of the iron-sulfur cluster into the polypeptide chain. Sequence comparison of T. maritima ferredoxin with other 4Fe-4S ferredoxins revealed high sequence identities (75% and 50% respectively) to the ferredoxins from the hyperthermophilic members of the Archaea, Thermococcus litoralis and Pyrococcus furiosus. The high sequence similarity supports a close relationship between these extreme thermophilic organisms from different phylogenetic domains and suggests that ferredoxins with a single 4Fe-4S cluster are the primordial representatives of the whole protein family. This observation suggests a new model for the evolution of ferredoxins.     

Characterization of the selenium-substituted 2 [4Fe-4Se] ferredoxin from Clostridium pasteurianum

The sulfur atoms of the two [4Fe-4S] clusters present in the ferredoxin from Clostridium pasteurianum have been replaced by selenium. The substitution is readily carried out by incubating the apoferredoxin with excess amounts of Fe3+, selenite, and dithiothreitol under anaerobic conditions. The UV-visible absorption spectrum of the Se-substituted ferredoxin, the core extrusion of its active sites, and analyses of its iron and selenium contents show that it contains two [4Fe-4Se] clusters. The Se-substituted ferredoxin is considerably less resistant to oxygen or to acidic and alkaline pH than the native ferredoxin: the half-lives of the former are 20-500 times shorter than those of the latter. The native ferredoxin and the Se-substituted ferredoxin display similar kinetic properties when used as electron donors to the hydrogenase from C. pasteurianum. It is of note, however, that the Km and Vmax values are lower for the 2[4Fe-4Se] ferredoxin than for the 2[4Fe-4S] ferredoxin. Reductive and oxidative titrations with dithionite and with thionine, respectively, show that both ferredoxins are two-electron carriers. The redox potentials of the ferredoxins have been measured by equilibrating them with the H2/H+ couple via hydrogenase: values of -423 and -417 mV have been found for the 2[4Fe-4S] ferredoxin and 2[4Fe-4Se] ferredoxin, respectively. Ferredoxins containing both chalcogenides in their [4Fe-4X] (X = S, Se) clusters have been prepared by reconstitution reactions involving mixtures of sulfide and selenide: the latter experiments show that sulfide and selenide are equally reactive in the incorporation of [4Fe-4X] (X = S, Se) sites into ferredoxin. The present report, together with former studies, establishes the general feasibility of the Se/S substitution in [2Fe-2S] and in [4Fe-4S] clusters of proteins and of synthetic analogues.     

Purification, properties and complete amino acid sequence of the ferredoxin from a green alga, Chlamydomonas reinhardtii

The ferredoxin was purified from the green alga, Chlamydomonas reinhardtii. The protein showed typical absorption and circular dichroism spectra of a [2Fe-2S] ferredoxin. When compared with spinach ferredoxin, the C. reinhardtii protein was less effective in the catalysis of NADP+ photoreduction, but its activity was higher in the light activation of C. reinhardtii malate dehydrogenase (NADP). The complete amino acid sequence was determined by automated Edman degradation of the whole protein and of peptides obtained by trypsin and chymotrypsin digestions and by CNBr cleavage. The protein consists of 94 residues, with Tyr at both NH2 and COOH termini. The positions of the four cysteines binding the two iron atoms are similar to those found in other [2Fe-2S] ferredoxins. The primary structure of C. reinhardtii ferredoxin showed a great homology (about 80%) with ferredoxins from two other green algae.     

Structure of a thioredoxin-like [2Fe-2S] ferredoxin from Aquifex aeolicus

The 2.3 A resolution crystal structure of a [2Fe-2S] cluster containing ferredoxin from Aquifex aeolicus reveals a thioredoxin-like fold that is novel among iron-sulfur proteins. The [2Fe-2S] cluster is located near the surface of the protein, at a site corresponding to that of the active-site disulfide bridge in thioredoxin. The four cysteine ligands are located near the ends of two surface loops. Two of these ligands can be substituted by non-native cysteine residues introduced throughout a stretch of the polypeptide chain that forms a protruding loop extending away from the cluster. The presence of homologs of this ferredoxin as components of more complex anaerobic and aerobic electron transfer systems indicates that this is a versatile fold for biological redox processes.     

Electrochemical and spectroscopic characterization of the conversion of the 7Fe into the 8Fe form of ferredoxin III from Desulfovibrio africanus. Identification of a [4Fe-4S] cluster with one non-cysteine ligand.

Desulfovibrio africanus ferredoxin III is a protein (Mr 6585) containing one [3Fe-4S]1+,0 and one [4Fe-4S]2+,1+ core cluster when aerobically isolated. The amino acid sequence contains only seven cysteine residues, the minimum required to ligand these two clusters. Cyclic voltammery by means of direct electrochemistry at a pyrolytic-graphite-'edge' electrode promoted by neomycin shows that, when reduced, the [3Fe-4S]0 centre reacts rapidly with Fe(II) ion to form a [4Fe-4S]2+ cluster. The latter, which can be reduced at a redox potential similar to that of the other [4Fe-4S] cluster, must include non-thiolate ligation. We propose that the carboxylate side chain of aspartic acid-14 is the most likely candidate, since this amino acid occupies the position of a cysteine residue in the sequence typical of an 8Fe ferredoxin. The magnetic properties at liquid-He temperature of this novel cluster, studied by low-temperature magnetic-c.d. and e.p.r. spectroscopy, are diamagnetic in the oxidized state and S = 3/2 in the one-electron-reduced state. This cluster provides a plausible model for the ligation states of the [4Fe-4S]1+ core in the S = 3/2 cluster of the iron protein of nitrogenase and in Bacillus subtilis glutamine:phosphoribosyl pyrophosphate amidotransferase.     

The amino acid sequence of ferredoxin from Sambucus nigra

The amino acid sequence of the ferredoxin from Sambucus nigra consists of a single polypeptide chain of 97 amino acid residues, 5 of which are cysteine. The positions of the 4 cysteine residues which bind the iron atoms of the active centre are identical to those of other ferredoxins. Due to difficulties of obtaining pure protein, residues 87–90 have only been identified from the amino acid analysis of peptide C 10 and by homology with other higher plant ferredoxins.     

Characterization and cloning of an extremely thermostable, Pyrococcus furiosus-type 4Fe ferredoxin from Thermococcus profundus.

An extremely thermostable [4Fe-4S] ferredoxin was isolated under anaerobic conditions from a hyperthermophilic archaeon Thermococcus profundus, and the ferredoxin gene was cloned and sequenced. The nucleotide sequence of the ferredoxin gene shows the ferredoxin to comprise 62 amino acid residues with a sequence similar to those of many bacterial and archaeal 4Fe (3Fe) ferredoxins. The unusual Fe-S cluster type, which was identified in the resonance Raman and EPR spectra, has three cysteines and one aspartate as the cluster ligands, as in the Pyrococcus furiosus 4Fe ferredoxin. Under aerobic conditions, a ferredoxin was purified that contains a [3Fe-4S] cluster as the major Fe-S cluster and a small amount of the [4Fe-4S] cluster. Its N-terminal amino acid sequence is the same as that of the anaerobically-purified ferredoxin up to the 26th residue. These results indicate that the 4Fe ferredoxin was degraded to 3Fe ferredoxin during aerobic purification. The aerobically-purified ferredoxin was reversibly converted back to the [4Fe-4S] ferredoxin by the addition of ferrous ions under reducing conditions. The anaerobically-purified [4Fe-4S] ferredoxin is quite stable; little degradtion was observed over 20 h at 100 degrees C, while the half-life of the aerobically-purified ferredoxin is 10 h at 100 degrees C. Both the anaerobically- and aerobically-purified ferredoxins were found to function as electron acceptors for the pyruvate-ferredoxin oxidoreductase purified from the same archaeon.     

Determination of nonligand amino acids critical to [4Fe-4S]2+/+ assembly in ferredoxin maquettes.

The prototype ferredoxin maquette, FdM, is a 16-amino acid peptide which efficiently incorporates a single [4Fe-4S]2+/+ cluster with spectroscopic and electrochemical properties that are typical of natural bacterial ferredoxins. Using this synthetic protein scaffold, we have investigated the role of the nonliganding amino acids in the assembly of the iron-sulfur cluster. In a stepwise fashion, we truncated FdM to a seven-amino acid peptide, FdM-7, which incorporates a cluster spectroscopically identical to FdM but in lower yield, 29% relative to FdM. FdM-7 consists solely of the. CIACGAC. consensus ferredoxin core motif observed in natural protein sequences. Initially, all of the nonliganding amino acids were substituted for either glycine, FdM-7-PolyGly (.CGGCGGC.), or alanine, FdM-7-PolyAla (.CAACAAC.), on the basis of analysis of natural ferredoxin sequences. Both FdM-7-PolyGly and FdM-7-PolyAla incorporated little [4Fe-4S]2+/+ cluster, 6 and 7%, respectively. A systematic study of the incorporation of a single isoleucine into each of the four nonliganding positions indicated that placement either in the second or in the sixth core motif positions,.CIGCGGC. or.CGGCGIC., restored the iron-sulfur cluster binding capacity of the peptides to the level of FdM-7. Incorporation of an isoleucine into the fifth position,.CGGCIGC., which in natural ferredoxins is predominantly occupied by a glycine, resulted in a loss of [4Fe-4S] affinity. The substitution of leucine, tryptophan, and arginine into the second core motif position illustrated the stabilization of the [4Fe-4S] cluster by bulky hydrophobic amino acids. Furthermore, the incorporation of a single isoleucine into the second core motif position in a 16-amino acid ferredoxin maquette resulted in a 5-fold increase in the level of [4Fe-4S] cluster binding relative to that of the glycine variant. The protein design rules derived from this study are fully consistent with those derived from natural ferredoxin sequence analysis, suggesting they are applicable to both the de novo design and structure-based redesign of natural proteins.     

The [2Fe-2S] protein I (Shetna protein I) from Azotobacter vinelandii is homologous to the [2Fe-2S] ferredoxin from Clostridium pasteurianum

 The [2Fe-2S] protein from Azotobacter vinelandii that was previously known as iron-sulfur protein I, or Shethna protein I, has been shown to be encoded by a gene belonging to the major nif gene cluster. Overexpression of this gene in Escherichia coli yielded a dimeric protein of which each subunit comprises 106 residues and contains one [2Fe-2S] cluster. The sequence of this protein is very similar to that of the [2Fe-2S] ferredoxin from Clostridium pasteurianum (2FeCpFd), and the four cysteine ligands of the [2Fe-2S] cluster occur in the same positions. The A. vinelandii protein differs from the C. pasteurianum one by the absence of the N-terminal methionine, the presence of a five-residue C-terminal extension, and a lesser number of acidic and polar residues. The UV-visible absorption and EPR spectra, as well as the redox potentials of the two proteins, are nearly identical. These data show that the A. vinelandii FeS protein I, which is therefore proposed to be designated 2FeAvFdI, is the counterpart of the [2Fe-2S] ferredoxin from C. pasteurianum. The occurrence of the 2FeAvFdI-encoding gene in the nif gene cluster, together with the previous demonstration of a specific interaction between the 2FeCpFd and the nitrogenase MoFe protein, suggest that both proteins might be involved in nitrogen fixation, with possibly similar roles. Received: 21 December 1998 / Accepted: 1 March 1999     

Determination of cooperative interaction between clusters in Clostridium pasteurianum 2 (4Fe-4S) ferredoxin.

The effect of reducing one 4Fe-4S cluster in Clostridium pasteurianum 2 (4Fe-4S) ferredoxin on the reduction potential of the unreduced cluster has been investigated. While such an effect is suggested by both the x-ray structure of Peptococcus aerogenes 2 (4F-4S) ferredoxin and the polypeptide conformational change on reduction present in clostridial-type 2 (4Fe-4S) ferredoxins, present studies indicate that cluster-cluster cooperative interaction is not strong enough to be of functional importance in these proteins.     

Design and functional expression in Escherichia coli of a synthetic gene encoding Clostridium pasteurianum 2[4Fe-4S] ferredoxin.

A gene encoding the exact sequence of Clostridium pasteurianum 2[4Fe-4S] ferredoxin and containing 11 unique restriction endonuclease cleavage sites has been synthesized and cloned in Escherichia coli. The synthetic gene is efficiently expressed in E. coli and its product has been purified and characterized. The N-terminal sequence is identical to that of the protein isolated from C. pasteurianum and the recombinant ferredoxin contains the exact amount of [4Fe-4S] clusters (2 per monomer) expected for homogeneous holoferredoxin. It displays reduction potential and kinetic parameters as electron donor to C. pasteurianum hydrogenase I identical to those determined for the native ferredoxin. All of these properties demonstrate that the 2[4Fe-4S] ferredoxin expressed in E. coli is identical to the parent clostridial protein.