应用Agilent 2100 Bioanalyzer分析限制性显示技术制备的HIV片段库

使用Agilent 2 10 0Bioanalyzer分析限制性显示技术 (restrictiondisplay ,RD)制备的HIV片段库 .利用合适的限制酶从质粒上获得HIVB亚型代表株U2 6 94 2全基因cDNA ,然后将目的片段进行Sau3AⅠ消化 ,在消化得到的片段两端加接头 ,利用通用引物进行PCR扩增 ,扩增结果通过琼脂糖凝胶电泳以及Agilent 2 10 0Bioanalyzer两种方法分析 .结果显示 ,Agilent 2 10 0Bioanalyzer比琼脂糖凝胶电泳能更快速、直接和客观地反映RD技术制备的DNA片段的大小以及含量 ,并能对RD PCR过程中片段自身连接以及优势扩增的现象进行直接的监控作用 .     

一种有效回收小分子DNA片段的方法

介绍了一种有效回收小于200bp DNA片段的方法。用改进的冻融-离心回收法对155bp的DNA片段进行回收,并且与常规冻融-离心回收、TaKaRa回收试剂盒的结果做对比,用琼脂糖凝胶电泳检测回收结果,紫外吸收法定量分析。结果证明:改进的方法是一种经济、方便、可靠的回收小分子DNA片段的方法。     

Agarose Gel Electrophoresis for the Separation of DNA Fragments

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb¹. Agarose is isolated from the seaweed genera Gelidium and Gracilaria, and consists of repeated agarobiose (L- and D-galactose) subunits². During gelation, agarose polymers associate non-covalently and form a network of bundles whose pore sizes determine a gel''s molecular sieving properties. The use of agarose gel electrophoresis revolutionized the separation of DNA. Prior to the adoption of agarose gels, DNA was primarily separated using sucrose density gradient centrifugation, which only provided an approximation of size. To separate DNA using agarose gel electrophoresis, the DNA is loaded into pre-cast wells in the gel and a current applied. The phosphate backbone of the DNA (and RNA) molecule is negatively charged, therefore when placed in an electric field, DNA fragments will migrate to the positively charged anode. Because DNA has a uniform mass/charge ratio, DNA molecules are separated by size within an agarose gel in a pattern such that the distance traveled is inversely proportional to the log of its molecular weight³. The leading model for DNA movement through an agarose gel is "biased reptation", whereby the leading edge moves forward and pulls the rest of the molecule along⁴. The rate of migration of a DNA molecule through a gel is determined by the following: 1) size of DNA molecule; 2) agarose concentration; 3) DNA conformation⁵; 4) voltage applied, 5) presence of ethidium bromide, 6) type of agarose and 7) electrophoresis buffer. After separation, the DNA molecules can be visualized under uv light after staining with an appropriate dye. By following this protocol, students should be able to: 1. Understand the mechanism by which DNA fragments are separated within a gel matrix 2. Understand how conformation of the DNA molecule will determine its mobility through a gel matrix 3. Identify an agarose solution of appropriate concentration for their needs 4. Prepare an agarose gel for electrophoresis of DNA samples 5. Set up the gel electrophoresis apparatus and power supply 6. Select an appropriate voltage for the separation of DNA fragments 7. Understand the mechanism by which ethidium bromide allows for the visualization of DNA bands 8. Determine the sizes of separated DNA fragments       

A simple, efficient, and economical method for recovering DNA from agarose gel

A simple method of recovering DNA from agarose gel that is fast, inexpensive, and friendly both to operators and environment is described. Two rows of wells are made in an agarose gel, and a DNA sample is loaded into the well nearest to the negative pole for separation by electrophoresis. Recovery is accomplished by pipetting the DNA-containing TAE buffer from the well near the positive pole after target DNA fragments have migrated into the well. A recovery rate of up to 94 +/- 2.3% was observed with this method.     

Mapping genomic organization by field inversion and two-dimensional gel electrophoresis: application to the murine T-cell receptor gamma gene family.

A new two-dimensional gel electrophoresis technique has been developed for the mapping of multigene families. Resolution in the first dimension is based on the generation of large size DNA fragments by infrequently-cutting restriction enzymes, and separation of these fragments by field inversion gel (FIG) electrophoresis. A second restriction enzyme digestion is then carried out with the separated DNA fragments in the agarose gel. Standard gel electrophoresis in the second dimension allows one to estimate the number of hybridizing genes contained in each large DNA fragment. We have also developed a novel method to increase the separation, resolution and hybridization signal in the second dimension by condensing the bands from the first dimension into spots. As an example, we have applied these techniques to determine the organization of the murine T-cell receptor gamma locus. The murine gamma gene family was found to be contained on two DNA fragments encompassing 195 kilobases of DNA. The two-dimensional gel electrophoresis method is particularly useful in the analysis of the organization of multigenic families where single copy probes are not readily available, and should extend the potential usefulness of field inversion gel electrophoresis in gene mapping.     

平末端DNA随机连接构建重组质粒

目的:拼接DNA片段并克隆。方法:用T4DNA连接酶将DNA片段以平末端随机连接,随后用限制性内切酶切割,琼脂糖电泳分离酶切产物,挑选特定片段纯化回收,与线性化的载体质粒连接,转化大肠杆菌感受态细胞。结果:通过以上步骤,成功拼接了不同DNA片段,构建了含有目的拼接片段的重组质粒。结论:该方法简便、易行、可靠,可作为拼接、克隆DNA的备选方案,在分子生物学研究和基因工程中应用。     

Separation and recovery of DNA fragments by electrophoresis through a thermoreversible hydrogel composed of poly(ethylene oxide) and poly(propylene oxide)

We have synthesized and characterized a thermoreversible hydrogel of multiplied block copolymers, composed of poly(ethylene oxide) and poly(propylene oxide), for DNA electrophoresis. The aqueous solution of block copolymers turned into a hydrogel upon heating at temperatures above 10-11 degrees C, whereas it reverted into a solution upon cooling. Linear double-stranded DNA molecules migrated through the gel matrices at a rate that was inversely proportional to the logarithm of the DNA length. The hydrogel is most effective for separating DNA fragments in the 10- to 2000-bp range. The resolving range lay in-between the effective ranges of polyacrylamide and agarose gel electrophoreses of DNA. The gel slices containing DNA fragments were liquefied by cooling on ice, and the DNA was precipitated with ethanol. No contaminants that inhibit enzymatic reactions were found in the DNA recovered from the hydrogel. Plasmid DNA recovered from the hydrogel was recircularized with T4 DNA ligase and yielded highly efficient Escherichia coli transformation. Therefore, thermoreversible gel electrophoresis will be a useful method for DNA separation and isolation in recombinant DNA technology.     

Measurement of radiation-induced DNA double-strand breaks by pulsed-field gel electrophoresis

We have examined the use of pulsed-field gel electrophoresis (PFGE) to measure DNA double-strand breaks induced in CHO cells by ionizing radiation. The PFGE assay provides a simple method for the measurement of DNA double-strand breaks for doses as low as 3-4 Gy ionizing radiation, and appears applicable for the measurement of damage produced by any agent producing double-strand breaks. The conditions of transverse alternating field electrophoresis determined both the sensitivity of the assay and the ability to resolve DNA fragments with different sizes. For example, with 0.8% agarose and a 1-min pulse time at 250 V for 18 h of electrophoresis, 0.39% of the DNA per gray migrated into the gel, and only molecules less than 1500 kb could be resolved. With 0.56% agarose and a 60-min pulse time at 40 V for 6 days of electrophoresis, 0.55-0.90% of the DNA per gray migrated into the gel, and molecules between 1500 and 7000 kb could be resolved.     

Electrophoretic mobility of high-molecular-weight, double-stranded DNA on agarose gels.

A new theoretical model for the migration of high-molecular-weight, double-stranded DNA on agarose gels is presented. This leads to the prediction that under certain conditions of electrophoresis, a linear relationship will exist between the molecular weight of a DNA molecule, raised to the (-2/3) power, and its electrophoretic mobility. Agarose gel electrophoresis of the fragments of bacteriophage lambda DNA produced by several restriction endonucleases confirms this relationship, and establishes some of the limits on its linearity. For this work, a polyacrylamide slab gel apparatus was modified for use with agarose gels. This apparatus has several advantages over others commercially available for agarose gel electrophoresis, including the abilities to run a larger number of samples at one time, to use lower-concentration gels, and to maintain better temperature stability across the width of the gel. The validation of the relationship developed here between molecular weight and electrophoretic mobility should make this a useful method for determining the molecular weights of DNA fragments.     

Contour-clamped homogeneous electric field electrophoresis of Staphylococcus aureus

Contour-clamped homogeneous electric field (CHEF) electrophoresis is a technique of pulsed-field gel electrophoresis that enables the resolution of large fragments of DNA that cannot be resolved by conventional gel electrophoresis. The procedure involves the application of controlled electric fields that change direction at a predetermined angle to samples of DNA that have been embedded in an agarose gel matrix and digested with a restriction endonuclease. Adjustment of the electrophoresis conditions enables the separation of DNA fragments with lengths from 10 kilobases up to 9 megabases in a size-dependent manner in agarose gels. The banding patterns can be used for epidemiological typing, the separated DNA can be immobilized onto a membrane and used for genetic mapping, or individual fragments can be extracted and used for downstream genetic manipulations. The protocol requires specialized equipment and can be completed in a maximum of 7 days.     

Detection of base mutations in genomic DNA using denaturing gradient gel electrophoresis (DGGE) followed by transfer and hybridization with gene-specific probes

It has been shown that minor differences, such as single-base-pair substitutions between otherwise identical DNA fragments can result in altered melting behavior detectable by denaturing gradient gel electrophoresis (DGGE). Sequence variations in only a small DNA region within one locus can be detected using the previously described procedures. We have developed a method for the efficient Southern transfer of genomic DNA fragments from the denaturing gradient gels in order to be able to analyze larger regions in several loci for variation. The gels were made using polyacrylamide containing 2% low-geling-temperature agarose (LGT). The polyacrylamide gel (PAG) was crosslinked with a reversible crosslinker, and after electrophoresis the crosslinks were cleaved, the structure of the gel being maintained by the agarose. After this treatment of the denaturing gels, more than 90% of the DNA fragments could be transferred to nylon membranes by alkaline transfer, while electroblotting transferred only 10% of the DNA. Hybridization with gene-specific probes was then performed. We have used this technique to identify an RFLP in the COL1A2 gene in a human genomic DNA sample. The transfer technique described should make the use of DGGE more widely applicable since the genomic DNA fragments separated on one gel can be screened with several different probes, both cDNA and genomic probes.     

Electrophoresis of DNA in oriented agarose gels

Oriented agarose gels were prepared by applying an electric field to molten agarose while it was solidifying. Immediately afterwards, DNA samples were applied to the gel and electrophoresed in a constant unidirectional electric field. Regardless of whether the orienting field was applied parallel or perpendicular to the eventual direction of electrophoresis, the mobilities of linear and supercoiled DNA molecules were either faster (80% of the time) or slower (20% of the time) than observed in control, unoriented gels run simultaneously. The difference in mobility in the oriented gel (whether faster or slower) usually increased with increasing DNA molecular weight and increasing voltage applied to orient the agarose matrix. In perpendicularly oriented gels linear DNA fragments traveled in lanes skewed toward the side of the gel; supercoiled DNA molecules traveled in straight lanes. If the orienting voltage was applied parallel to the direction of electrophoresis, both linear and supercoiled DNA molecules migrated in straight lanes. These effects were observed in gels cast from different types of agarose, using various agarose concentrations and two different running buffers, and were observed both with and without ethidium bromide incorporated in the gel. Similar results were observed if the agarose was allowed to solidify first, and the orienting electric field was then applied to the gel for several hours before the DNA samples were added and electrophoresed. The results suggest that the agarose matrix can be oriented by electric fields applied to the gel before and probably during electrophoresis, and that orientation of the matrix affects the mobility and direction of migration of DNA molecules. The skewed lanes observed in the perpendicularly oriented gels suggest that pores or channels can be created in the matrix by application of an electric field. The oriented matrix becomes randomized with time, because DNA fragments in oriented and unoriented gels migrated in straight lanes with identical velocities 24 hours later.     

Quantitative analysis of the three regimes of DNA electrophoresis in agarose gels

An extensive series of experiments has been performed to study the mobility of DNA fragments ranging in size from 2.0 to 48.5 kilobose pairs. By varying the agarose concentration in the gels and the electric field strength, three DNA electrophoresis regimes were clearly identified: the Ogston regime (small DNA fragments in large pores of agarose), the reptation regime without DNA chain stretching (small pores of agarose and weak electric fields), and the reptation regime with DNA chain stretching (small pores of agarose, strong electric fields, and large DNA fragments). Here we report on the experimental identification of these regimes and on the conditions governing the transition between each of them. The onset of reptation and of stretching of DNA chains in gel electrophoresis are described quantitatively for the first time, and a phase diagram for the dynamics of DNA during electrophoresis is presented.     

Two methods that facilitate autoradiography of small 32P-labeled DNA fragments following electrophoresis in agarose gels

Two methods which permit detection by autoradiography of small 32P-labeled DNA fragments resolved by agarose gel electrophoresis are described. Agarose gel electrophoresis poses problems for autoradiography as (i) the gels are normally too thick to allow autoradiography without being dried first, and (ii) fragments of DNA of 1000 bp or less in length are readily lost during drying. In this study DNA fragments as small as 121 bp have been retained in agarose gels upon drying. This has been achieved by either (i) first fixing the DNA with the cationic detergent cetyltrimethylammonium bromide, or (ii) drying the agarose gels onto Zeta-Probe charge-modified membranes.     

Electroeluting DNA Fragments

Purified DNA fragments are used for different purposes in Molecular Biology and they can be prepared by several procedures. Most of them require a previous electrophoresis of the DNA fragments in order to separate the band of interest. Then, this band is excised out from an agarose or acrylamide gel and purified by using either: binding and elution from glass or silica particles, DEAE-cellulose membranes, "crush and soak method", electroelution or very often expensive commercial purification kits. Thus, selecting a method will depend mostly of what is available in the laboratory. The electroelution procedure allows one to purify very clean DNA to be used in a large number of applications (sequencing, radiolabeling, enzymatic restriction, enzymatic modification, cloning etc). This procedure consists in placing DNA band-containing agarose or acrylamide slices into sample wells of the electroeluter, then applying current will make the DNA fragment to leave the agarose and thus be trapped in a cushion salt to be recovered later by ethanol precipitation.     

Detection of sequence variation in PCR-amplified fragments of omp2 gene from three species of the family Chlamydiaceae using agarose gel electrophoresis containing bisbenzimide-PEG

A simple technique providing a means for rapid genetic differentiation of chlamydial strains is described. The technique is based on a single-step sequence-specific separation of PCR-amplified DNA fragments by electrophoresis in an agarose gel containing a DNA ligand - bisbenzimide-PEG. A hypervariable region at the 5' end of the omp2 gene of Chlamydiaceae species encoding the 60-kDa cysteine-rich outer membrane protein was selected as a target for PCR. The appropriate fragments were amplified from strains of Chlamydia trachomatis, Chlamydophila pneumoniae, and Chlamydophila psittaci, and the PCR products originating from different species were electrophoretically separated in the presence of the DNA ligand. We therefore demonstrated that PCR with a single pair of primers followed by simple agarose gel electrophoresis with bisbenzimide-PEG can be applied to the differentiation of three members of the family Chlamydiaceae which are commonly recognized as human pathogens.     

Transverse agarose pore gradient gel electrophoresis of DNA.

Transverse agarose pore gradient gels were prepared on GelBond in the concentration range of nominally 0.2-1.5% SeaKem GTG agarose, using density stabilization by glycerol and incorporation of a dye to define the gel concentration at each point on the pore gradient gel. The distribution of the dye was evaluated by photography, video-acquisition and digitization of the gradient mixture and by densitometry of the gel. The gel was applied to the electrophoresis of a 1-kb standard ladder of DNA fragments, using standard submarine apparatus. The method extends to agarose gel electrophoresis the benefits of semi-automated analysis of 'Ferguson curves' described in application to polyacrylamide gel by Wheeler et al. (J. Biochem. Biophys. Methods 24, 171-180).     

Purification and cloning of DNA fragments fractionated on agarose gels

Purification of DNA fragments from acrylamide or agarose gels is a commonly used technique in the molecular biology laboratory. This article describes a rapid, efficient, and inexpensive method of purifying DNA fractions from an agarose gel. The purified DNA is suitable for use in a wide range of applications including ligation using DNA ligase. The procedure uses standard high-melting-temperature agarose and normal TBE electrophoresis buffer. In addition, the protocol does not involve the use of highly toxic organic solvents such as phenol.     

Electrophoresis and movements of fluorescence pattern after photobleaching of large DNA fragments in agarose gels

By combining electrophoresis with movements of fluorescence pattern after photobleaching (MOFPAP), which is abbreviated as EMOFPAP, we are able to measure electrophoretic mobilities of large DNA fragments in an agarose gel within a fairly short time scale (about 10 min or even down to 1 min). The new method represents a significant improvement in experiment time when compared with the time (typically on the order of hours) required to determine the average electrophoretic mobility of large DNA fragments in agarose gels by means of either conventional gel electrophoresis or pulsed-field gel electrophoresis. In this article, we present the EMOFPAP experimental setup and consider optical conditions, including beam profile geometry and fluorescence pattern formation. A realistic formula that can explain the parameters governing the EMOFPAP method using our present optical setup has been derived. A comparison of results between experimental and computer simulation data is made, and an optimization of the EMOFPAP method is proposed.     

Arrangement of the single-stranded fragments in E. coli bacteriophage BF23 DNA

Bacteriophage BF23st(0) DNA was denatured with alkali and fractionated by agarose gel electrophoresis. Seven single-stranded fragments (designated Fragments I--VII) were identified as the major constituents of the phage DNA. The presence of several minor fragments which represent minor populations of the phage genome was also observed. The largest fragment (Fragment I) represents the intact strand of phage DNA, whereas the other fragments form the complementary strand. Thus, BF23st(0) DNA carries single-strand interruptions in only one strand. The arrangement of the major fragments in the nicked strand was determined by use of gamma-exonuclease and agarose gel electrophoresis. From the mode of action of this nuclease, and from the kinetics of release or disappearance of the fragments, the polarity of the fragments in BF23st(0) DNA was specified. In addition, the presence of two types of major phage populations differing in their composition of the fragments was demonstrated. One type has an additional nick (yielding Fragment IV and Fragment V) in a specific fragment (Fragment II) of other type.