利用归一化互相关算法去除吸收强度涨落调制血管造影图像模糊

吸收强度涨落调制成像（AIFM）方法是基于血红细胞和背景组织对低相干光照明的吸收差异,通过在频域分离动态的血红细胞信号和静态的背景信号,实现对近透明活体生物样本全场无标记的光学血管造影成像. 但此成像方法需采集较长的原始图像序列,系统漂移或生物抖动会造成图像模糊,难以实现对某些特定区域的血管造影成像. 本文提出一种结合AIFM成像和归一化互相关算法的新方法来提升血管造影图像的质量：原始的图像序列被分成若干短时序列,每个短时序列先利用AIFM成像算法重构得到全场的血管造影图像;再利用归一化的互相关算法将所有的短时重构图像与第一帧重构图像相匹配,并融合得到最终的血管造影片. 我们以活体鸡蛋胚胎为样品,通过实验验证了利用短时归一化互相关AIFM成像方法,能够消除鸡胚胎心跳引起的图像模糊,从而获得高分辨率和信噪比的心血管造影片,对研究活体动物心脑血管疾病具有重要应用价值.     

通过光学相干断层扫描图像进行自动视网膜分割评估黄斑水肿的投影面积（英文）

本文提出一种自动视网膜分割方法,以评估光学相干断层扫描(OCT)图像中黄斑水肿(ME)在视网膜特定层上的投影面积.首先使用基于权重矩阵的优化最短路径最快算法对10个视网膜层边界进行分割,这有效降低了算法对血管阴影的敏感性.然而,ME的存在将导致水肿区域的分割不准确.因此,使用强度阈值方法提取每个OCT图像中的水肿区域,并将该区域中的值设置为零,并确保获得的分割边界可以自动穿过而不是绕过水肿区域.同时使用最小值投影来计算ME在不同层的投影面积.为了测试该方法,使用了从Topcon OCT机器收集的数据.在轴向和B扫描方向上测得的黄斑区域分辨率分别为11.7μm和46.8μm.与手动分割相比,视网膜层边界分割的平均绝对误差和标准偏差为(4.5±3.2)μm.因此,所提出的方法为评估水肿提供了一种自动、无创和定量的工具.     

一种新的混合震动滤波和各向异性扩散的图像增强和去噪方法研究

针对传统震动滤波和各向异性扩散混合模型存在缺点,提出了一种新的图像增强和去噪方法。该方法将改进的震动滤波项和图像细节保真项同时引入增强和去噪方程,使其根据图像结构信息产生相应变化幅度。通过实验表明,本文提出的方法达到较理想的增强和去噪效果,使得生物医学图像不仅具有很好的平滑效果,而且增强了边缘,同时保留了尽可能多的图像结构和细节信息,并且还很大程度上缩短了计算时间。     

基于Renyi熵滤波的光声图像重建算法设计与实现

针对光声图像重建过程中存在的原始光声信号信噪比差、重建图像对比度低、分辨率不足等问题,提出了基于Renyi熵的光声图像重建滤波算法.该算法首先根据原始光声信号的Renyi熵分布情况,确定分割阈值,并滤除杂波信号;再利用滤波后的光声数据进行延时叠加光声图像重建.利用该滤波算法分别处理铅笔芯横截面(零维)、头发丝(一维)以及小鼠大脑皮层血管(二维)等不同维度样本的光声信号,实验结果表明:相比Renyi熵处理之前,重建图像对比度平均增强了32.45%,分辨率平均提高了30.78%,信噪比提高了47.66%,均方误差降低了35.01%;相比典型的滤波处理算法(模极大值法和阈值去噪法),本研究中图像的对比度、分辨率和信噪比分别提高了25.94%/10.60%、27.90%/19.48%、35.21%/10.60%,均方误差减小了28.57%/16.66%.因此,选择利用Renyi熵滤波算法处理光声信号,从而使光声图像重建质量得到大幅改善.     

一种滤除医学影像噪声的混合滤波算法

目的:医学影像在获取、存储、传输过程中会不同程度地受到噪声污染,这极大影像了其在临床诊疗中的应用。为了有效地滤除医学影像噪声,提出了一种混合滤波算法。方法:该算法首先将含有高斯和椒盐噪声的图像进行形态学开运算,然后对开运算后的图像进行二维小波分解,得到高频和低频小波分解系数。保留低频系数不变,将高频系数经过维纳滤波器进行滤波,最后进行小波系数重构。结果:采用该混合滤波算法、小波阈值去噪、中值滤波、维纳滤波分别对含有混合噪声的医学影像分别进行滤除噪声处理,该滤波算法去噪后影像的PSNR值明显高于其他三种方法。结论:该混合滤波算法是一种较为有效的医学影像噪声滤除方法。     

通过光学相干断层扫描图像进行自动视网膜分割评估黄斑水肿的投影面积

在本文中,我们提出了一种自动视网膜分割方法,以评估光学相干断层扫描（OCT）图像中黄斑水肿（ME）在视网膜特定层上的投影面积。首先使用基于权重矩阵的优化的最短路径最快算法对十个视网膜层边界进行分割,这有效降低了算法对血管阴影的敏感性。然而,ME的存在将导致水肿区域的分割不准确。因此,我们使用强度阈值方法提取每个OCT图像中的水肿区域,并将该区域中的值设置为零,并确保获得的分割边界可以自动穿过而不是绕过水肿区域。我们使用最小值投影来计算ME在不同层的投影面积。为了测试我们的方法,我们使用了从Topcon的OCT机器收集的数据。在轴向和B扫描方向上测得的黄斑区域分辨率分别为11.7微米和46.8微米。与手动分割相比,视网膜层边界分割的平均绝对误差和标准偏差为4.5±3.2微米。因此,所提出的方法为评估水肿提供了一种自动,无创和定量的工具。     

一种滤除医学影像噪声的混合滤波算法

目的：医学影像在获取、存储、传输过程中会不同程度地受到噪声污染,这极大影像了其在临床诊疗中的应用。为了有效地滤除医学影像噪声,提出了一种混合滤波算法。方法：该算法首先将含有高斯和椒盐噪声的图像进行形态学开运算,然后对开运算后的图像进行二维小波分解,得到高频和低频小波分解系数。保留低频系数不变,将高频系数经过维纳滤波器进行滤波,最后进行小波系数重构。结果：采用该混合滤波算法、小波阚值去噪、中值滤波、维纳滤波分别对含有混合噪声的医学影像分别进行滤除噪声处理,该滤波算法去噪后影像的PSNR值明显高于其他三种方法。结论：该混合滤波算法是一种较为有效的医学影像噪声滤除方法。     

光学相干层析用于牙齿病变的检测

阐述了适用于牙齿结构成像的光学相干层析成像(OCT)系统。系统光源中心波长为1 310 nm,成像分辨率10μm,在牙内成像深度2 mm,成像速度1幅/秒,系统信噪比100 dB。利用此OCT仪清晰检测到牙齿样品的牙釉质和牙本质,观察到牙釉质与牙本质的分界面以及正常牙齿牙釉质与龋齿牙齿牙釉质OCT图像的区别。进一步设计研制了适用于口腔内探测的小型OCT探头。     

基于PET医学图像边缘检测算法的研究

目的:边缘检测在图像处理中至关重要,可被广泛应用于目标区域识别、区域形状检测、图像分割等图像分析领域。边缘是图像中不平稳现象和不规则结构的重要表现,往往携带着图像中的大量信息,并给出图像轮廓。在医学图像三维显示技术中,为了更精确的临床判别需要得到单像素的清晰轮廓,因此我们提出一种新的边缘检测算法。方法:在传统的小波边缘检测的基础上,提出了一种新的边缘算法,即基于小波极大值边缘检测算法,应用模糊算法构造相应的隶属函数,再对得到的极大值进一步筛选。结果:将该算法应用到医学图像中,最终可以得到较清楚的单像素边缘轮廓,实验结果证明了该算法的可行性。结论:运用这种算法处理过的医学图像边缘锐化更好,更清晰,能够为肿瘤的早期识别提供依据,满足医学影像识别的需要。     

基于主成分分析的随机森林视网膜OCT图像分层算法研究

视网膜是层状结构,临床上可以根据视网膜层厚度改变对一些疾病进行预测和诊断.为了快速且准确地分割出视网膜的不同层带,本论文提出一种基于主成分分析的随机森林视网膜光学相干断层扫描技术(optical coherence tomography,OCT)图像分层算法.该方法使用主成分分析(principal component analysis,PCA)法对随机森林采集到的特征进行重采样,保留重采样后权重大的特征信息维度,从而消除特征维度间的关联性和信息冗余.结果表明,总特征维度在29维的情况下,保留前18维度训练速度提高了23.20%,14维度训练速度提高了42.38%,而对图像分割精度方面影响较小,实验表明该方法有效地提高了算法的效率.     

Detecting mouse squamous cell carcinoma from submicron full-field optical coherence tomography images by deep learning

The standard medical practice for cancer diagnosis requires histopathology, which is an invasive and time-consuming procedure. Optical coherence tomography (OCT) is an alternative that is relatively fast, noninvasive, and able to capture three-dimensional structures of epithelial tissue. Unlike most previous OCT systems, which cannot capture crucial cellular-level information for squamous cell carcinoma (SCC) diagnosis, the full-field OCT (FF-OCT) technology used in this paper is able to produce images at sub-micron resolution and thereby facilitates the development of a deep learning algorithm for SCC detection. Experimental results show that the SCC detection algorithm can achieve a classification accuracy of 80% for mouse skin. Using the sub-micron FF-OCT imaging system, the proposed SCC detection algorithm has the potential for in-vivo applications.     

基于改进型组织特异纹理滤波器的乳腺肿瘤超声图像处理

基于乳腺超声图像的多参数纹理分类实验,改进了Gjenna Sfippel等的自适应纹理滤波器,通过引入模糊函数、增加重叠区域和迭代次数的措施,在减少图像噪声的同时,增强肿瘤与周围正常组织的视觉差别。量化比较乳腺超声图像经该滤波算法和几种常用滤波算法处理前后的的统计特征参量和肿瘤边缘检测的精确率,验证了该算法的有效性和优越性。     

Pré-traitement d’un volume IRM par filtrage anisotrope robuste pour la segmentation de l’épaule

A novel pre-treatment process for image segmentation, based on anisotropic diffusion and robust statistics, is presented in this paper. Image smoothing with edge preservation is shown to help upper limb segmentation (shoulder segmentation in particular) in MRI datasets. The anisotropic diffusion process is mainly controlled by an automated stopping function that depends on the values of voxel gradient. Voxel gradients are divided into two classes: one for high values, corresponding to edge voxels or noisy voxels, one for low values. The anisotropic diffusion process is also controlled by a threshold on voxel gradients that separates both classes. A global estimation of this threshold parameter is classically used. In this paper, we propose a new method based on a local robust estimation. It allows a better removing of noise while preserving edges in the images. An entropy criterion is used to quantify the ability of the algorithm to remove noise with different signal to noise ratios in synthetic images. Another quantitative evaluation criterion based on the Pratt Figure of Merit (FOM) is proposed to evaluate the edge preservation and their location accuracy with respect to a manual segmentation. The results on synthetic and MRI data of shoulder show the assets of the local model in terms of areas homogeneity and edges locations.     

A two-step procedure for automatic and accurate segmentation of volumetric CLSM biofilm images

This paper presents a robust two-step segmentation procedure for the study of biofilm structure. Without user intervention, the procedure segments volumetric biofilm images generated by a confocal laser scanning microscopy (CLSM). This automated procedure implements an anisotropic diffusion filter as a preprocessing step and a 3D extension of the Otsu method for thresholding. Applying the anisotropic diffusion filter to even low-contrast CLSM images significantly improves the segmentation obtained with the 3D Otsu method. A comparison of the results for several CLSM data sets demonstrated that the accuracy of this procedure, unlike that of the objective threshold selection algorithm (OTS), is not affected by biofilm coverage levels and thus fills an important gap in developing a robust and objective segmenting procedure. The effectiveness of the present segmentation procedure is shown for CLSM images containing different bacterial strains. The image saturation handling capability of this procedure relaxes the constraints on user-selected gain and intensity settings of a CLSM. Therefore, this two-step procedure provides an automatic and accurate segmentation of biofilms that is independent of biofilm coverage levels and, in turn, lays a solid foundation for achieving objective analysis of biofilm structural parameters.     

Noise Reduction in Electron Tomographic Reconstructions Using Nonlinear Anisotropic Diffusion

Electron tomography is a powerful technique capable of giving unique insights into the three-dimensional structural organization of pleomorphic biological objects. However, visualization and interpretation of the resulting volumetric data are hampered by an extremely low signal-to-noise ratio, especially when ice-embedded biological specimens are investigated. Usually, isosurface representation or volume rendering of such data is hindered without any further signal enhancement. We propose a novel technique for noise reduction based on nonlinear anisotropic diffusion. The approach combines efficient noise reduction with excellent signal preservation and is clearly superior to conventional methods (e.g., low-pass and median filtering) and invariant wavelet transform filtering. The gain in the signal-to-noise ratio is verified and demonstrated by means of Fourier shell correlation. Improved visualization performance after processing the 3D images is demonstrated with two examples, tomographic reconstructions of chromatin and of a mitochondrion. Parameter settings and discretization stencils are presented in detail.     

Liver vessel segmentation based on extreme learning machine

Liver-vessel segmentation plays an important role in vessel structure analysis for liver surgical planning. This paper presents a liver-vessel segmentation method based on extreme learning machine (ELM). Firstly, an anisotropic filter is used to remove noise while preserving vessel boundaries from the original computer tomography (CT) images. Then, based on the knowledge of prior shapes and geometrical structures, three classical vessel filters including Sato, Frangi and offset medialness filters together with the strain energy filter are used to extract vessel structure features. Finally, the ELM is applied to segment liver vessels from background voxels. Experimental results show that the proposed method can effectively segment liver vessels from abdominal CT images, and achieves good accuracy, sensitivity and specificity.     

MRI denoising using nonlocal neutrosophic set approach of Wiener filtering

In this paper, a new filtering method is presented to remove the Rician noise from magnetic resonance images (MRI) acquired using single coil MRI acquisition system. This filter is based on nonlocal neutrosophic set (NLNS) approach of Wiener filtering. A neutrosophic set (NS), a part of neutrosophy theory, studies the origin, nature, and scope of neutralities, as well as their interactions with different ideational spectra. Now, we apply the neutrosophic set into image domain and define some concepts and operators for image denoising. First, the nonlocal mean is applied to the noisy MRI. The resultant image is transformed into NS domain, described using three membership sets: true (T), indeterminacy (I) and false (F). The entropy of the neutrosophic set is defined and employed to measure the indeterminacy. The ω-Wiener filtering operation is used on T and F to decrease the set indeterminacy and to remove the noise. The experiments have been conducted on simulated MR images from Brainweb database and clinical MR images. The results show that the NLNS Wiener filter produces better denoising results in terms of qualitative and quantitative measures compared with other denoising methods, such as classical Wiener filter, the anisotropic diffusion filter, the total variation minimization and the nonlocal means filter. The visual and the diagnostic quality of the denoised image are well preserved.     

Improved and Robust Detection of Cell Nuclei from Four Dimensional Fluorescence Images

Segmentation-free direct methods are quite efficient for automated nuclei extraction from high dimensional images. A few such methods do exist but most of them do not ensure algorithmic robustness to parameter and noise variations. In this research, we propose a method based on multiscale adaptive filtering for efficient and robust detection of nuclei centroids from four dimensional (4D) fluorescence images. A temporal feedback mechanism is employed between the enhancement and the initial detection steps of a typical direct method. We estimate the minimum and maximum nuclei diameters from the previous frame and feed back them as filter lengths for multiscale enhancement of the current frame. A radial intensity-gradient function is optimized at positions of initial centroids to estimate all nuclei diameters. This procedure continues for processing subsequent images in the sequence. Above mechanism thus ensures proper enhancement by automated estimation of major parameters. This brings robustness and safeguards the system against additive noises and effects from wrong parameters. Later, the method and its single-scale variant are simplified for further reduction of parameters. The proposed method is then extended for nuclei volume segmentation. The same optimization technique is applied to final centroid positions of the enhanced image and the estimated diameters are projected onto the binary candidate regions to segment nuclei volumes.Our method is finally integrated with a simple sequential tracking approach to establish nuclear trajectories in the 4D space. Experimental evaluations with five image-sequences (each having 271 3D sequential images) corresponding to five different mouse embryos show promising performances of our methods in terms of nuclear detection, segmentation, and tracking. A detail analysis with a sub-sequence of 101 3D images from an embryo reveals that the proposed method can improve the nuclei detection accuracy by 9 over the previous methods, which used inappropriate large valued parameters. Results also confirm that the proposed method and its variants achieve high detection accuracies ( 98 mean F-measure) irrespective of the large variations of filter parameters and noise levels.     

基于全场光学相干层析技术评估卵母细胞质量

卵胞质质量是影响卵母细胞发育能力的重要因素，然而目前仍缺少无损且客观高效地评估卵胞质成熟度的方法.已知胞质成熟度低是导致体外成熟卵母细胞发育能力远低于体内成熟卵母细胞的主要原因.全场光学相干层析技术(FF-OCT)具有无损非标记且三维高分辨的特点.FF-OCT采集的体内成熟与体外成熟小鼠卵胞质图像，经对比发现，具有大面积高亮皮质区及胞质均匀分布的卵母细胞，其胞质成熟度更高.为验证这一点，对比了显微镜下筛选和FF-OCT筛选的体外成熟卵母细胞的体外受精率，发现显微镜筛选组的体外受精率远低于体内成熟的情况，FF-OCT筛选组的体外受精率与体内成熟组之间无显著差异.这说明FF-OCT筛选的体外成熟卵母细胞发育能力接近于体内成熟的卵母细胞.此外还利用FF-OCT成功观测到新鲜及老化卵母细胞之间的形态差别，即老化卵母细胞胞质均匀性更差及高亮皮质区更小.因此，FF-OCT可用于无损评估卵胞质质量，且大面积高亮皮质区的存在性及胞质分布的均匀性是评估卵胞质质量的有效指标.