荧光标记复合PCR扩增微卫星位点的构建与优化

本研究采用毛细管电泳技术,构建并优化了荧光标记复合PCR同时扩增多个微卫星位点。主要过程为：首先根据设计所扩增微卫星位点的期望长度,将9个微卫星位点分成两组,5个位点用FAM（蓝色）标记,4个位点用HEX（绿色）标记;两种荧光类型分组优化,用琼脂糖胶电泳检测。其次,荧光标记的复合PCR扩增8个中华绒螯蟹样品的9个微卫星位点,采用ABI3730xl毛细管电泳检测,以ROX500（红色）为长度标准物,结果经Genemapper3.5软件 分析,检测结果表明毛细管电泳检测荧光标记复合PCR产物不仅精确读取微卫星位点的长度（分辨率高达1bp）,还能区分微卫星位点复制时滑链所引起的“回声斑”;调整各微卫星位点引物比列使所有位点扩增强弱均匀。最后,逐一检测复合PCR基本参数（dNTP浓度、 PCR程序和模版DNA用量）对复合PCR产物的影响,优化PCR。结果表明通过毛细管电泳检测荧光标记复合PCR产物来读取微卫星位点的基因型具有精确性、高效性和稳定性。     

A multiple high-resolution mini two-dimensional polyacrylamide gel electrophoresis system: imaging two-dimensional gels using a cooled charge-coupled device after staining with silver or labeling with fluorophore.

A multiple mini two-dimensional electrophoretic method which results in three two-dimensional protein spot patterns being positioned side by side in an individual gel has been developed. Preparation time has been minimized by employing disposable capillary tubes for the isoelectric focusing gels and reducing the number of second-dimensional gels required. Commercially available vertical slab units were used for the second-dimensional electrophoresis. The protein spot patterns were visualized either by staining the second-dimensional gel with silver or fluorescently labeling the focused proteins while present in the isoelectric focusing gel and subsequently electrophoresing them into the second-dimensional gel. The fluorescently labeled second-dimensional gel was imaged while still present in the glass mold immediately following electrophoresis. Two fluorophores were compared: 2-methoxy-2,4-diphenyl-3(2H)-furanone and 5-(4,6-dichlorotriazin-2-yl)aminofluorescein hydrochloride. A rapid imaging system based on a cooled charge-coupled device was used to view both the silver-stained and fluorescently labeled two-dimensional spot patterns. The sensitivity of detection of protein spots in the mini two-dimensional gels was similar for the two types of fluorescently labeled gels and the silver-stained gels.     

Adapting capillary gel electrophoresis as a sensitive,high-throughput method to accelerate characterization of nucleic acid metabolic enzymes

Detailed biochemical characterization of nucleic acid enzymes is fundamental to understanding nucleic acid metabolism, genome replication and repair. We report the development of a rapid, high-throughput fluorescence capillary gel electrophoresis method as an alternative to traditional polyacrylamide gel electrophoresis to characterize nucleic acid metabolic enzymes. The principles of assay design described here can be applied to nearly any enzyme system that acts on a fluorescently labeled oligonucleotide substrate. Herein, we describe several assays using this core capillary gel electrophoresis methodology to accelerate study of nucleic acid enzymes. First, assays were designed to examine DNA polymerase activities including nucleotide incorporation kinetics, strand displacement synthesis and 3′-5′ exonuclease activity. Next, DNA repair activities of DNA ligase, flap endonuclease and RNase H2 were monitored. In addition, a multicolor assay that uses four different fluorescently labeled substrates in a single reaction was implemented to characterize GAN nuclease specificity. Finally, a dual-color fluorescence assay to monitor coupled enzyme reactions during Okazaki fragment maturation is described. These assays serve as a template to guide further technical development for enzyme characterization or nucleoside and non-nucleoside inhibitor screening in a high-throughput manner.     

Multiwavelength fluorescence detection for DNA sequencing using capillary electrophoresis.

Multiwavelength detection of laser induced fluorescence for dideoxynucleotide DNA sequencing with four different fluorophores and separation by capillary gel electrophoresis is described. A cryogenically cooled, low readout noise, 2-dimensional charge-coupled device is used as a detector for the on-line, on-column recording of emission spectra. The detection system has no moving parts and provides wavelength selectivity on a single detector device. The detection limit of fluorescently labeled oligonucleotides meets the high sensitivity requirements for capillary DNA sequencing largely due to the efficient operation of the CCD detector with a 94% duty cycle. Using the condition number as a selectivity criterion, multiwavelength detection provides better analytical selectivity than detection with four bandpass filters. Monte Carlo studies and analytical estimates show that base assignment errors are reduced with peak identification based on entire emission spectra. High-speed separation of sequencing samples and the treatment of the 2-dimensional electropherogram data is presented. Comparing the DNA sequence of a sample separated by slab gel electrophoresis with sequence from capillary gel electrophoresis and multiwavelength detection we find no significant difference in the amount of error attributable to the instrumentation.     

Chain length determination of small double- and single-stranded DNA molecules by polyacrylamide gel electrophoresis.

We describe the use of polyacrylamide gel electrophoresis to estimate chain lengths of double- and single-stranded DNA molecules in the size range 20-1000 base pairs (or nucleotides). Double-stranded DNA molecules of known length produced either by organic synthesis or by restriction endonuclease digestion of viral DNAs were used as standards. The relative electrophoretic mobilities of these standards were examined on both nondenaturing (aqueous) polyacrylamide gels and on denaturing gels containing 7 M urea or 98% formamide. Electrophoretic mobility of DNA is a linear function of the log of molecular weight if appropriate conditions are used, although exceptions are noted. Chain lengths can be conveniently estimated by using as standards bacteriophage gamma DNA restriction fragments or commercially available tracking dyes.     

Footprinting with an automated capillary DNA sequencer

Footprinting is a valuable tool for studying DNA-protein contacts. However, it usually involves expensive, tedious and hazardous steps such as radioactive labeling and analyses on polyacrylamide sequencing gels. We have developed an easy four-step footprinting method involving (i) the generation and purification of a PCR fragment that is fluorescently labeled at one end with 6-carboxyfluorescein; (ii) brief exposure of the fragment to a DNA-binding protein and then DNase I; (iii) spin-column purification; and (iv) analysis of partial digestion products on the ABI Prism 310 capillary DNA sequencer/genetic analyzer. Very detailed and sensitive footprints of large (> 400 bp) DNA fragments can be easily obtained, as illustrated by our use of this method to characterize binding of PhcA, a LysR-type activator, to two sites greater than 100 bp apart in the 5' untranslated region of xpsR, one of its regulated target genes. The advantages of this new method are that it (i) uses long-lived, safe and easy-to-make fluorescently labeled target fragments; (ii) uses sensitive, robust and highly reproducible fragment analysis using an automated DNA sequencer, instead of gel electrophoresis and autoradiography; and (iii) is cost effective.     

Mutation screening using fluorescence multiplex denaturing gradient gel electrophoresis (FMD): detecting mutations in the BRCA1 gene

Fluorescent multiplex denaturing gradient gel electrophoresis (FMD) is a mutation screening technique designed to detect unknown as well as previously identified mutations. FMD constitutes a recent modification of the standard denaturing gradient gel electrophoresis (DGGE) technique, which combines multiplex PCR amplification of target DNA using fluorescently labeled primers with DGGE separation of the amplicon mixture, allowing immediate identification of sequence variants by wet gel scanning. FMD permits the simultaneous detection of small insertions, deletions and single nucleotide substitutions among multiple DNA fragments (up to 480 fragments) from 96 samples in parallel for each run. It increases output and reduces cost dramatically compared with classical DGGE, without sacrificing sensitivity and accuracy in detecting mutations. This protocol details an accurate, fast, nonradioactive and cost-effective way to screen the BRCA1 gene for mutations with high sensitivity, providing easily interpreted results. It may also be adapted to screen other target genes and/or used in large-scale epidemiological studies.     

Single molecule DNA sequencing in submicrometer channels: state of the art and future prospects

We demonstrate a new method for single molecule DNA sequencing which is based upon detection and identification of single fluorescently labeled mononucleotide molecules degraded from DNA-strands in a cone shaped microcapillary with an inner diameter of 0.5 microm. The DNA was attached at an optical fiber via streptavidin/biotin binding and placed approximately 50 microm in front of the detection area inside of the microcapillary. The 5'-biotinylated 218-mer model DNA sequence used in the experiments contained 6 fluorescently labeled cytosine and uridine residues, respectively, at well defined positions. The negatively charged mononucleotide molecules were released by addition of exonuclease I and moved towards the detection area by electrokinetic forces. Adsorption of mononucleotide molecules onto the capillary walls as well as the electroosmotic (EOF) flow was prevented by the use of a 3% polyvinyl pyrrolidone (PVP) matrix containing 0.1% Tween 20. For efficient excitation of the labeled mononucleotide molecules a short-pulse diode laser emitting at 638 nm with a repetition rate of 57 MHz was applied. We report on experiments where single-stranded model DNA molecules each containing 6 fluorescently labeled dCTP and dUTP residues were attached at the tip of a fiber, transferred into the microcapillary and degraded by addition of exonuclease I solution. In one experiment, the exonucleolytic cleavage of 5-6 model DNA molecules was observed. 86 photon bursts were detected (43 Cy5-dCMP and 43 MR121-dUMP) during 400 s and identified due to the characteristic fluorescence decay time of the labels of 1.43+/-0.19 ns (Cy5-dCMP), and 2.35+/-0.29 ns (MR121-dUMP). The cleavage rate of exonuclease I on single-stranded labeled DNA molecules was determined to 3-24 Hz under the applied experimental conditions. In addition, the observed burst count rate (signals/s) indicates nonprocessive behavior of exonuclease I on single-stranded labeled DNA.     

An ultrasensitive site-specific DNA recombination assay based on dual-color fluorescence cross-correlation spectroscopy

Site-specific exchange of genetic information is mediated by DNA recombinases, such as FLP or Cre, and has become a valuable tool in modern molecular biology. The so far low number of suitable recombinating enzymes has driven current research activities towards alteration of catalytic properties, such as thermostability or recognition sequences. However, identification and analysis of new mutants requires sensitive in vitro activity assays, which traditionally are based on gel electrophoresis. Here, we describe the development of a new sensitive DNA recombination assay based on dual-color fluorescence cross-correlation spectroscopy (DC-FCCS), which works in homogenous solution and does not require any separation step such as electrophoresis. The assay was validated with unlabeled FLP recombinase and different fluorescently labeled DNA substrates containing the FLP recognition target (FRT). This strategy fulfills all requirements for possible application in high throughput screening and engineering of new site-specific DNA recombinases starting from the FLP-FRT system, and is easily adjustable to other systems like Cre/loxP.     

The Effect of the Structure of Fluorescently Labeled Nucleotide Derivatives on the Efficiency of Their Incorporation in DNA in the Polymerase Chain Reaction

The efficiency of fluorescence DNA labeling was estimated for four fluorescent 2′-deoxyuridine 5′-triphosphate derivatives differing in the orientation of the main dye axis, which passes through the polymethine chain, relative to the linker connecting the dye to the nucleotide. To estimate the polymerase chain reaction (PCR) rate, real-time PCR was run with two commercial hot-start DNA polymerases possessing 5′→3′ exonuclease activity in the presence of an intercalating dye. The efficiency of the test compound incorporation in the PCR product was estimated via a quantitative analysis of the amplification product by agarose gel electrophoresis. The fluorescently labeled product was then hybridized on a biological microchip and the ratio of signals from perfect match and mismatch duplexes was determined. The incorporation efficiency and discrimination between perfect match and mismatch duplexes were found to depend on the relative orientation of the dye and the linker between the dye and pyrimidine base, as well as on the presence of hydrophilic groups in the dye. Compounds that are efficiently incorporated in a growing DNA strand and show a high specificity in hybridization analysis were identified using biochips.     

Low-molecular- weight Rauscher leukemia virus protein with preferential binding for single-stranded RNA and DNA.

A sensitive nitrocellulose filter assay that measures the retention of 125I single-stranded calf thymus DNA has been used to detect and purify DNA-binding proteins that retain a biological function from Rauscher murine leukemia virus. By consecutive purification on oligo (dT)- cellulose and DEAE-Bio-Gel columns and centrifugation in 10 to 30% glycerol gradients, RNA-dependent DNA polymerase has been separated from a second virion DNA-binding protein. The binding of this protein to DNA was strongly affected by NaCl concentration but showed little change in activity over a wide range of temperature or pH. After glycerol gradient purification, polyacrylamide gel electrophoresis of this protein showed one major band with a molecular weight of approximately 9,800. This protein binds about as well as to single-stranded Escherichia coli or calf thymus DNA or 70S type C viral RNA. The binding to 125I single-stranded calf thymus DNA is very efficiently inhibited by unlabeled single-stranded DNA from either E. coli or calf thymus and by 70S murine or feline viral RNA. Much larger amounts of double-stranded DNA are required to produce an equivalent percentage of inhibition. This protein, therefore, shows preferential binding to single-stranded DNA or viral RNA.     

Rapid quantification of DNA methylation through dNMP analysis following bisulfite-PCR

We report a novel method for rapid quantification of the degree of DNA methylation of a specific gene. Our method combined bisulfite-mediated PCR and quantification of deoxyribonucleoside monophosphate (dNMP) contents in the PCR product through capillary electrophoresis. A specific bisulfite-PCR product was enzymatically hydrolyzed to dNMP monomers which were quantitatively analyzed through subsequent capillary electrophoresis. PCR following bisulfite treatment converts unmethylated cytosines to thymines while leaving methyl-cytosines unchanged. Then the ratio of cytosine to thymine determined by capillary electrophoresis represents the ratio of methyl-cytosine to cytosine in genomic locus of interest. Pure oligonucleotides with known sequences were processed in parallel as standards for normalization of dNMP peaks in capillary electrophoresis. Sources of quantification uncertainty such as carryovers of dNTPs or primers and incomplete hydrolysis were examined and ruled out. When the method was applied to samples with known methylation levels (by bisulfite-mediated sequencing) as a validation, deviations were within ±5%. After bisulfite-PCR, the analytical procedure can be completed within 1.5 h.     

T_RFLP技术及其在硝化细菌群落分析中的应用

T_RFLP是建立在PCR基础上的, 一种不依赖于传统培养方法的微生物生态学的研究方法。具有快速、灵敏的特点。自1997年首次被报道以来, T_RFLP技术已广泛应用于菌种鉴定、群落对比分析、群落中系统发育种群多样性的评估等领域, 并成为环境微生物群落结构分析的强有力工具之一。目前T_RFLP在国内的应用较少, 硝化细菌的群落分析上还未见报道。但作为一种研究微生物群落结构特征的理想方法, 将会得到广泛地应用。本文主要介绍了T_RFLP的基本原理, 概括了在微生物群落分析上的应用, 阐述了硝化细菌传统研究的局限性及T_RFLP在硝化细菌群落结构分析上的应用前景。     

T_RFLP技术及其在硝化细菌群落分析中的应用

T_RFLP是建立在PCR基础上的,一种不依赖于传统培养方法的微生物生态学的研究方法.具有快速、灵敏的特点.自1997年首次被报道以来,T_RFLP技术已广泛应用于菌种鉴定、群落对比分析、群落中系统发育种群多样性的评估等领域,并成为环境微生物群落结构分析的强有力工具之一.目前T_RFLP在国内的应用较少,硝化细菌的群落分析上还未见报道.但作为一种研究微生物群落结构特征的理想方法,将会得到广泛地应用.本文主要介绍了T_RFLP的基本原理,概括了在微生物群落分析上的应用,阐述了硝化细菌传统研究的局限性及T_RFLP在硝化细菌群落结构分析上的应用前景.     

Stable-isotope probing with multiple growth substrates to determine substrate specificity of uncultivated bacteria

Stable-isotope probing (SIP) has been used to determine which microorganisms in a complex environmental sample are capable of metabolizing a labeled substrate. We hypothesized that DNA-based stable-isotope probing with a combination of a (13)C-labeled carbon source and a second, unlabeled carbon source could be combined with analyses of the entire gradient of separated DNA to provide information concerning the utilization of a mixture of environmentally relevant compounds by uncultivated organisms. As a test of the method, we evaluated the response of a microbial community in a laboratory bioreactor treating contaminated soil to two polycyclic aromatic hydrocarbons (PAH). The compounds were added either individually as [U-(13)C]phenanthrene or [U-(13)C]pyrene, or as a mixture in which one was labeled with (13)C and the other was unlabeled. After ultracentrifugation of DNA extracted from a given incubation, fractions containing DNA enriched with varying levels of (13)C were examined by denaturing-gradient gel electrophoresis (DGGE) and by real-time quantitative PCR (qPCR) for 16S rRNA genes belonging to organisms in groups of bacteria previously associated with PAH degradation by single-compound SIP. Four groups of bacteria (three uncultivated) were followed in this study. Two of the uncultivated groups showed evidence for simultaneous or sequential utilization of both compounds while the remaining two appeared to assimilate carbon from only one of the compounds. DNA-based SIP therefore appears to be useful to evaluate the selectivity among substrates in a mixture by uncultivated microbes.     

Increased efficiency of genetic profiling through quantity and quality assessment of fluorescently labeled oligonucleotide primers

Optimizing the amount of primer to use in PCR amplification is one of the most important steps when developing protocols for genetic profiling, where subtle changes in primer concentration result in major impacts on the amount of desired product that is amplified. However; there are frequently discrepancies between the reported and actual quantity of primers delivered by suppliers, resulting in a need for re-optimization of conditions between primer orders and limiting the ability to standardize conditions between laboratories. To increase the consistency of genetic profiling protocols, we have developed a simple method to assess the quantity and quality of fluorescently labeled primers and therefore standardize reaction conditions through time and across laboratories. The method is based on analysis by electrophoresis with an automated fluorescent DNA analyzer.     

Nucleic acid renaturation and restriction endonuclease cleavage analyses show that the DNAs of a transforming and a nontransforming strain of Epstein-Barr virus share approximately 90% of their nucleotide sequences.

Viral DNA molecules were purified from a nontransforming and a transforming strain of Epstein-Barr virus. Each viral DNA was labeled in vitro and renatured in the presence of an excess of either one or the other unlabeled viral DNA. Both viral DNAs were also digested with the Eco R1 restriction endonuclease and subsequently labeled by using avian myeloblastosis virus DNA polymerase to repair either the EcoR1 nuclease-generated single-stranded ends of the DNAs or their single-stranded ends produced by a second digestion with exonuclease III after the first EcoR1 nuclease digestion. The results of these experiments support three general conclusions: (i) the DNAs of these two strains of Epstein-Barr virus share approximately 90% of their nucleotide sequences; (ii) both viral DNA populations are reasonably homogenous; and (iii) both DNAs contain repetitions or inverted repetitions of some of their nucleotide sequences.     

The Efficiency of DNA Labeling with Near-Infrared Fluorescent Dyes

The efficiency of DNA labeling was assessed for 2'-deoxyuridine 5'-triphosphate (dUTP) derivatives containing the Cy7 cyanine dye as a fluorophore. Two fluorescent Cy7-labeled dUTP analogs differed in the chemical structure of the linker between the fluorophore and nucleotide moieties. The efficiency of the polymerase chain reaction (PCR) and inhibition with modified nucleotides were estimated by real-time PCR. The efficiency of labeled nucleotide incorporation in PCR products was measured by quantitative electrophoresis. The efficiency of target DNA labeling was evaluated by binding the fluorescently labeled PCR products to a microarray of oligonucleotide probes immobilized in hydrogel drops (a biochip). The near-infrared hybridization signal was detected by digital luminescence microscopy. An increase in linker length was found to provide more efficient incorporation of the labeled nucleotide. Both of the compounds provided high sensitivity and high specificity of DNA testing via allele-specific hybridization on a biochip.

     

Determination of Transgene Copy Number in Stably Transfected Mammalian Cells by PCR-Capillary Electrophoresis Assay

The quantitative determination of transgene copy number in stably transfected mammalian cells has been traditionally estimated by Southern blot analysis. Recently, other methods have become available for appraisal of gene copy number, such as real-time PCR. Herein we describe a new method based on a fluorescently labeled PCR, followed by capillary electrophoresis. We amplified our target gene (prothrombin) and the internal control originating from genomic DNA (18S rRNA) in the same PCR tube and calculated the mean peak height ratio of the target:control gene for every cell clone sample. With this approach we identified stably transfected cell clones bearing the same transgene copy number. The results of our assay were confirmed by real-time PCR. Our method proves to be fast, low-cost, and reproducible compared with traditionally used methods. This assay can be used as a rapid screening tool for the determination of gene copy number in gene expression experiments.