Directly labeled DNA probes using fluorescent nucleotides with different length linkers.

Directly labeled fluorescent DNA probes have been made by nick translation and PCR using dUTP attached to the fluorescent label, Cy3, with different length linkers. With preparation of probes by PCR we find that linker length affects the efficiency of incorporation of Cy3-dUTP, the yield of labeled probe, and the signal intensity of labeled probes hybridized to chromosome target sequences. For nick translation and PCR, both the level of incorporation and the hybridization fluorescence signal increased in parallel when the length of the linker arm is increased. Under optimal conditions, PCR yielded more densely labeled probes, however, the yield of PCR labeled probe decreased with greater linear density of labeling. By using a Cy3-modified dUTP with the longest linker under optimal conditions it was possible to label up to 28% of the possible substitution sites on the target DNA with reasonable yield by PCR and 18% by nick translation. A mechanism involving steric interactions between the polymerase, cyanine-labeled sites on template and extending chains and the modified dUTP substrate is proposed to explain the inverse correlation between the labeling efficiency and the yield of DNA probe synthesis by PCR.     

Substrate Properties of New Fluorescently Labeled Deoxycytidine Triphosphates in Enzymatic Synthesis of DNA with Polymerases of Families A and B

The efficiency of the incorporation of fluorescently labeled derivatives of 2'-deoxycytidine in DNA synthesized de novo has been studied using PCR with Taq and Tth polymerases of family A and Vent (exo–) and Deep Vent (exo–) polymerases of family B. Four derivatives of 5'-triphosphate-2'-deoxycytidine (dCTP) have different chemical structures of the indodicarbocyanine dye and Cy5 analogue attached to position 5 of cytosine. The kinetics of the accumulation of the PCR products and the intensity of the fluorescent signals in the hybridization analysis with immobilized DNA probes depend on the modification of the fluorescently labeled dCTP counterpart, its concentration, and the type of DNA polymerase. All labeled triphosphates showed some inhibitory effects on PCR. The best balance between the efficiency of incorporating labeled cytidine derivatives and the negative effect on the PCR kinetics has been shown in the case of Hot Taq polymerase in combination with the Cy5-dCTP analogue, which contains containing electrically neutral chromophore, the axis of which is a continuation of the linker between the chromophore and the pyrimidine base.     

Comparison of different labeling methods for the production of labeled target DNA for microarray hybridization

Different labeling methods were studied to compare various approaches to the preparation of labeled target DNA for microarray experiments. The methods under investigation included a post-PCR labeling method using the Klenow fragment and a DecaLabel DNA labeling kit, the use of a Cy3-labeled forward primer in the PCR, generating either double-stranded or single-stranded PCR products, and the incorporation of Cy3-labeled dCTPs in the PCR. A microarray that had already been designed and used for the detection of microorganisms in compost was used in the study. PCR products from the organisms Burkholderia cepacia and Staphylococcus aureus were used in the comparison study, and the signals from the probes for these organisms analyzed. The highest signals were obtained when using the post-PCR labeling method, although with this method, more non-specific hybridizations were found. Single-stranded PCR products that had been labeled by the incorporation of a Cy3-labeled forward primer in the PCR were found to give the next highest signals upon hybridization for a majority of the tested probes, with less non-specific hybridizations. Hybridization with double-stranded PCR product labeled with a Cy3-labeled forward primer, or labeled by the incorporation of Cy3-labeled dCTPs resulted in acceptable signal to noise ratios for all probes except the UNIV 1389a and Burkholderia genus probes, both located toward the 3' end of the 16S rRNA gene. The comparison of the different DNA labeling methods revealed that labeling via the Cy3-forward primer approach is the most appropriate of the studied methods for the preparation of labeled target DNA for our purposes.     

The Effect of the Structure of Fluorescently Labeled Nucleotide Derivatives on the Efficiency of Their Incorporation in DNA in the Polymerase Chain Reaction

The efficiency of fluorescence DNA labeling was estimated for four fluorescent 2′-deoxyuridine 5′-triphosphate derivatives differing in the orientation of the main dye axis, which passes through the polymethine chain, relative to the linker connecting the dye to the nucleotide. To estimate the polymerase chain reaction (PCR) rate, real-time PCR was run with two commercial hot-start DNA polymerases possessing 5′→3′ exonuclease activity in the presence of an intercalating dye. The efficiency of the test compound incorporation in the PCR product was estimated via a quantitative analysis of the amplification product by agarose gel electrophoresis. The fluorescently labeled product was then hybridized on a biological microchip and the ratio of signals from perfect match and mismatch duplexes was determined. The incorporation efficiency and discrimination between perfect match and mismatch duplexes were found to depend on the relative orientation of the dye and the linker between the dye and pyrimidine base, as well as on the presence of hydrophilic groups in the dye. Compounds that are efficiently incorporated in a growing DNA strand and show a high specificity in hybridization analysis were identified using biochips.     

The kinetics of fluorescent DNA labeling using PCR with different Taq polymerases depends on the chemical structures of modified nucleotides

The kinetics of DNA labeling during PCR using six fluorescent derivatives of 2′-deoxyuridine 5′-triphosphate has been studied. These compounds differ in their chemical structure, total electric charge and the length of the linker between a dye and the C5 position of a pyrimidine base. The efficiency of the incorporation of the fluorescent derivatives into a growing DNA chain by four commercially available Taq DNA polymerases with 5′→3′ exonuclease and hot start activity has been determined using real-time PCR with a TaqMan probe and the subsequent electrophoretic analysis of the reaction products. Modified deoxyuridines with a total positive or negative charge of the chromophore were practically not incorporated by Taq polymerases during PCR. The modified deoxyuridines with a neutral charge of the chromophore were effectively incorporated into DNA. The extended length of the linker between the pyrimidine base and the chromophore led to a lower PCR inhibition and a more effective inclusion of modified nucleotides in the growing DNA chain. This fact can be explained by the reduced steric effects that were caused by the dye. As a result, the most promising combinations of fluorescently labeled nucleotide and Taq polymerase have been chosen for further use in fluorescent DNA labeling.     

Stability, specificity and fluorescence brightness of multiply-labeled fluorescent DNA probes.

In this work, we studied the fluorescence and hybridization of multiply-labeled DNA probes which have the hydrophilic fluorophore 1-(straightepsilon-carboxypentynyl)-1'-ethyl- 3,3,3', 3'-tetramethylindocarbocyanine-5,5'-disulfonate (Cy3) attached via either a short or long linker at the C-5 position of deoxyuridine. We describe the effects of labeling density, fluorophore charge and linker length upon five properties of the probe: fluorescence intensity, the change in fluorescence upon duplex formation, the quantum yield of fluorescence (Phif), probe-target stability and specificity. For the hydrophilic dye Cy3, we have demonstrated that the fluorescence intensity andPhifare maximized when labeling every 6th base using the long linker. With a less hydrophilic dye, a labeling density this high could not be achieved without serious quenching of the fluorescence. The target specificity of multiply-labeled DNA probes was just as high as compared to the unmodified control probe, however, a less stable probe-target duplex is formed that exhibits a lower melting temperature. A mechanism that accounts for this destabilization is proposed which is consistent with our data. It involves dye-dye and dye-nucleotide interactions which appear to stabilize a single-stranded conformation of the probe.     

Effects of a Modified Dye-Labeled Nucleotide Spacer Arm on Incorporation by Thermophilic DNA Polymerases

The ability of eight commercially available thermophilic DNA polymerases to sequentially incorporate fluorescently labeled nucleotides sequentially was analyzed by a gel based primer extension assay. Cy5-dUTP or a variant nucleotide in which the linker had been lengthened by 14 atoms between the dye and the nucleobase were compared. We found that the Cy5-dUTP with a longer linker resulted in longer primer extension lengths. Furthermore, some of the assayed polymerases are capable of extending the primer to the full or near full length of 30 nucleotides using dye-labeled nucleotides exclusively.     

近交系小鼠双色荧光正相杂交芯片技术体系的建立和优化

目的探讨采用单核苷酸多态性（SNP）检测方法-双色荧光正相杂交芯片技术对近交系小鼠遗传质量监测及相关影响因素。方法运用基于芯片的双色荧光正相杂交检测SNP技术,进行芯片杂交动力学研究,考察信号值（Cy3,Cy5）和ratio值（Cy5/Cy3）与PCR产物点样浓度、PCR产物长度和荧光标记探针长度之间的关系,研究PCR产物点样浓度、PCR产物长度和荧光标记探针长度对SNP分型的影响。结果采用正反标记实验后,Ratio值随着PCR产物点样浓度的增加呈稳定趋势;PCR双链产物长度对信号值影响比较大,点样时其长度不宜太长,最好不超过450 bp;随荧光标记探针长度的增加,基因分型能力明显下降,长度为15 bp最佳,长度超过20 bp时,已基本没有区分能力。结论PCR产物点样浓度、PCR产物长度和荧光标记探针长度是双色荧光正相杂交SNP分型系统的重要影响因素,采取适当的PCR产物点样浓度、PCR产物长度和荧光标记探针长度,并采用正反标记实验,可以取得稳定、准确的基因分型效果。为进一步进行近交系小鼠遗传质量监测的研究奠定基础。     

Cyanine dye dUTP analogs for enzymatic labeling of DNA probes.

Fluorescence in situ hybridization (FISH) has become and indispensable tool in a variety of areas of research and clinical diagnostics. Many applications demand an approach for simultaneous detection of multiple target sequences that is rapid and simple, yet sensitive. In this work, we describe the synthesis of two new cyanine dye-labeled dUTP analogs, Cy3-dUTP and Cy5-dUTP. They are efficient substrates for DNA polymerases and can be incorporated into DNA probes by standard nick translation, random priming and polymerase chain reactions. Optimal labeling conditions have been identified which yield probes with 20-40 dyes per kilobase. The directly labeled DNA probes obtained with these analogs offer a simple approach for multicolor multisequence analysis that requires no secondary detection reagents and steps.     

Single-Molecule Imaging at High Fluorophore Concentrations by Local Activation of Dye

Single-molecule fluorescence microscopy is a powerful tool for observing biomolecular interactions with high spatial and temporal resolution. Detecting fluorescent signals from individual labeled proteins above high levels of background fluorescence remains challenging, however. For this reason, the concentrations of labeled proteins in in vitro assays are often kept low compared to their in vivo concentrations. Here, we present a new fluorescence imaging technique by which single fluorescent molecules can be observed in real time at high, physiologically relevant concentrations. The technique requires a protein and its macromolecular substrate to be labeled each with a different fluorophore. Making use of short-distance energy-transfer mechanisms, only the fluorescence from those proteins that bind to their substrate is activated. This approach is demonstrated by labeling a DNA substrate with an intercalating stain, exciting the stain, and using energy transfer from the stain to activate the fluorescence of only those labeled DNA-binding proteins bound to the DNA. Such an experimental design allowed us to observe the sequence-independent interaction of Cy5-labeled interferon-inducible protein 16 with DNA and the sliding via one-dimensional diffusion of Cy5-labeled adenovirus protease on DNA in the presence of a background of hundreds of nanomolar Cy5 fluorophore.     

Three-dimensional microarray platform applied to single nucleotide polymorphism analysis

Bio-Strand, Inc., has developed a novel DNA microarray platform utilizing a three-dimensional (3D) DNA format. DNA probes or polymerase chain reaction (PCR) products are spotted onto a thread-like scaffold, which is then wound onto a cylindrical core. By wrapping the thread around the core, high efficiencies are achieved in sample analysis. Using allele-specific oligo (ASO) competitive hybridization (with Cy5 fluorescently labeled sequences), hybridized arrays are visualized using a helium-neon (HeNe) laser and quantitated/scored. The method can readily detect single nucleotide differences. We demonstrate the use of this Bio-Strand 3D array in the analysis of a single nucleotide polymorphism (SNP).     

Molecular basis of action of HyBeacon fluorogenic probes: a spectroscopic and molecular dynamics study

HyBeacons, novel DNA probes for ultra-rapid detection of single nucleotide polymorphisms, contain a fluorophore covalently attached via a linker group to an internal nucleotide. As the probe does not require a quencher or self-complementarity to function, this study investigates the molecular-level mechanism underlying the increase of fluorescence intensity on hybridization of HyBeacons with target DNA. Spectroscopic ultraviolet-visible and fluorimetric studies, combined with molecular dynamics simulations, indicate projection of the fluorophore moiety away from the target-probe duplex into aqueous solution, although specific linker-DNA interactions are populated. Based on evidence from this study, we propose that for HyBeacons, the mechanism of increased fluorescence on hybridization is due to disruption of quenching interactions in the single-stranded probe DNA between the fluorophore and nucleobases. Hybridization leads to an extended linker conformation, removing the fluorophore from the immediate vicinity of the DNA bases.     

Optimized incorporation of an unnatural fluorescent amino acid affords measurement of conformational dynamics governing high-fidelity DNA replication

DNA polymerase from bacteriophage T7 undergoes large, substrate-induced conformational changes that are thought to account for high replication fidelity, but prior studies were adversely affected by mutations required to construct a Cys-lite variant needed for site-specific fluorescence labeling. Here we have optimized the direct incorporation of a fluorescent un-natural amino acid, (7-hydroxy-4-coumarin-yl)-ethylglycine, using orthogonal amber suppression machinery in Escherichia coli. MS methods verify that the unnatural amino acid is only incorporated at one position with minimal background. We show that the single fluorophore provides a signal to detect nucleotide-induced conformational changes through equilibrium and stopped-flow kinetic measurements of correct nucleotide binding and incorporation. Pre-steady-state chemical quench methods show that the kinetics and fidelity of DNA replication catalyzed by the labeled enzyme are largely unaffected by the unnatural amino acid. These advances enable rigorous analysis to establish the kinetic and mechanistic basis for high-fidelity DNA replication.     

PCR amplification and simultaneous digoxigenin incorporation of long DNA probes for fluorescence in situ hybridization.

Nonradioactive in situ hybridization has found widespread applications in cytogenetics. Basic requirements are DNA probes in sufficient amounts and of high specificity as well as a labeling protocol of good reproducibility. The PCR has been of fundamental importance for the amplification of DNA sequences and thus for the production of DNA probes. Meanwhile, PCR protocols for amplification of DNA have reached a high degree of automation. So far, incorporation of labeled nucleotides into these DNA probes has normally been done by nick translation. Here we show that in using the PCR, amplification of a DNA probe larger than one kilobase accompanied by simultaneous incorporation of digoxigenin-11-dUTP can be performed for in situ hybridization experiments. As an example, the DNA probe pUC 1.77 specific for the subcentromeric region q12 of chromosome number 1 was used and hybridized against metaphase chromosomes from human lymphocytes. The labeled chromosome region was detected by anti-digoxigenin-fluorescein, Fab fragments. The experiments were evaluated by digital image analysis of microphotographs.     

Electrophoretic Techniques Applied to the Detection and Analysis of the Human Microsatellite Dg10s478

Short nucleotide repetitions (STRs) are commonly used as genetic markers; thus their detection and analysis constitutes a very important tool for the mapping of genetic diseases, as well as for gathering information about genetic polymorphisms at the population level. STRs can be detected with agarose- or acrylamide-based electrophoretic techniques, followed by visualization of the DNA sample with ethidium bromide, silver nitrate, or fluorophore labeling. In this work, we analyzed genomic DNA from five individuals affected with type II diabetes mellitus (T2DM) and five controls (unaffected individuals) in order to know the most precise and reproducible technique for the analysis of the existing polymorphism in the STR DG10S478 of the TCF7L2 gene. The combination of PCR with labeling of the products with the CY5 fluorophore, followed by detection on an ALFexpress sequencer, offered the required resolution to detect the variability in this STR, based solely on size analysis. Our methodology offers similar accuracy and reproducibility at lower costs than existing methods based on the sequencing of PCR products, and is a faster alternative when applied to genotyping studies.     

Preparing of single-stranded DNA in single-stage PCR with low-melt excess primer for hybridization on biochips

A method for fluorescently labeled single-stranded DNA (ssDNA) production during single-stage polymerase chain reaction (PCR) for subsequent hybridization on a biochip was described. This approach, whose efficiency was confirmed in the case of DARC gene, is considered as an alternative to two-stage nested PCR, consisting of two separate reactions: symmetric and asymmetric. Implementation of PCR in a single stage was achieved due to the use of a truncated excess primer in the second stage that does not anneal on the matrix during the cycles of symmetric stage of PCR and that enters the reaction after decrease of the annealing temperature in asymmetric stage. As a result, high efficiency of genotyping by means of hybridization on biochips is maintained. The suggested approach will allow us to reduce the time, working hours, and risk of contamination when researching biochips.     

Single nucleotide polymorphism detection in aldehyde dehydrogenase 2 (ALDH2) gene using bacterial magnetic particles based on dissociation curve analysis

Single nucleotide polymorphism (SNP) detection for aldehyde dehydrogenase 2 (ALDH2) gene based on DNA thermal dissociation curve analysis was successfully demonstrated using an automated system with bacterial magnetic particles (BMPs) by developing a new method for avoiding light scattering caused by nanometer-size particles when using commercially available fluorescent dyes such as FITC, Cy3, and Cy5 as labeling chromophores. Biotin-labeled PCR products in ALDH2, two allele-specific probes (Cy3-labeled detection probe for ALDH2*1 and Cy5-labeled detection probe for ALDH2*2), streptavidin-immobilized BMPs (SA-BMPs) were simultaneously mixed. The mixture was denatured at 70 degrees C for 3 min, cooled slowly to 25 degrees C, and incubated for 10 min, allowing the DNA duplex to form between Cy3- or Cy5-labeled detection probes and biotin-labeled PCR products on SA-BMPs. Then duplex DNA-BMP complex was heated to 58 degrees C, a temperature determined by dissociation curve analysis and a dissociated single-base mismatched detection probe was removed at the same temperature under precise control. Furthermore, fluorescence signal from the detection probe was liberated into the supernatant from completely matched duplex DNA-BMP complex by heating to 80 degrees C and measured. In the homozygote target DNA (ALDH2*1/*1 and ALDH2*2/*2), the fluorescence signals from single-base mismatched were decreased to background level, indicating that mismatched hybridization was efficiently removed by the washing process. In the heterozygote target DNA (ALDH2*1/*2), each fluorescence signals was at a similar level. Therefore, three genotypes of SNP in ALDH2 gene were detected using the automated detection system with BMPs.     

Effects of a modified dye-labeled nucleotide spacer arm on incorporation by thermophilic DNA polymerases

The ability of eight commercially available thermophilic DNA polymerases to sequentially incorporate fluorescently labeled nucleotides sequentially was analyzed by a gel based primer extension assay. Cy5-dUTP or a variant nucleotide in which the linker had been lengthened by 14 atoms between the dye and the nucleobase were compared. We found that the Cy5-dUTP with a longer linker resulted in longer primer extension lengths. Furthermore, some of the assayed polymerases are capable of extending the primer to the full or near full length of 30 nucleotides using dye-labeled nucleotides exclusively.     

利用Taq DNA聚合酶对PCR产物直接进行顺序分析

Taq DNA聚合酶具有反应速度快、温度作用范围广及良好的续进性等特点,可视为一种理想的DNA顺序分析酶。本文首先对非对称性PCR扩增过程中单、双链DNA产物的积累情况进行了分析,然后采用标记延伸二步法,对Taq DNA聚合酶的性质及影响因素进行分析。为进一步改进Taq DNA聚合酶测序的方法,本反应建立了“Klenow-型”的直接掺入标记同位素测序法,即在反应液中加入与标记核苷酸相应的一定浓度的冷dNTP。此法不但解决了二步法中引物后部分DNA顺序无法读出的缺点,而且简化了反应步骤,亦能得到令人满意的顺序分析结果,每次可读出至少400碱基的序列。