Production of 3‐Fucosyllactose in Engineered Escherichia coli with α‐1,3‐Fucosyltransferase from Helicobacter pylori

3‐Fucosyllactose (3‐FL), one of the major oligosaccharides in human breast milk, is produced in engineered Escherichia coli. In order to search for a good α‐1,3‐fucosyltransferase, three bacterial α‐1,3‐fucosyltransferases are expressed in engineered E. coli deficient in β‐galactosidase activity and expressing the essential enzymes for the production of guanosine 5′‐diphosphate‐l ‐fucose, the donor of fucose for 3‐FL biosynthesis. Among the three enzymes tested, the fucT gene from Helicobacter pylori National Collection of Type Cultures 11637 gives the best 3‐FL production in a simple batch fermentation process using glycerol as a carbon source and lactose as an acceptor. In order to use glucose as a carbon source, the chromosomal ptsG gene, considered the main regulator of the glucose repression mechanism, is disrupted. The resulting E. coli strain of ?LP‐YA+FT shows a much lower performance of 3‐FL production (4.50 g L^?1) than the ?L‐YA+FT strain grown in a glycerol medium (10.7 g L^?1), suggesting that glycerol is a better carbon source than glucose. Finally, the engineered E. coli ?LW‐YA+FT expressing the essential genes for 3‐FL production and blocking the colanic acid biosynthetic pathway (?wcaJ) exhibits the highest concentration (11.5 g L^?1), yield (0.39 mol mol^?1), and productivity (0.22 g L^?1 h) of 3‐FL in glycerol‐limited fed‐batch fermentation.     

A coumarin‐based fluorescent turn‐on probe for detection of biothiols in vitro

A novel fluorescent probe (CA‐N) was designed and synthesized for detection of biothiols. CA‐N displayed a strong fluorescence in the presence of biothiols with high sensitivity, and the mechanism for detection biothiols was based on the Michael addition reaction of a thiol group to α,β‐unsaturated ketones. CA‐N showed low detection limit for cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), which were calculated as 3.16, 0.19 and 5.15 μM, respectively. At the same time, CA‐N exhibited high selectivity toward biothiols compared with other biological amino acids. In vitro cell experiments proved that CA‐N had no cytotoxicity, high cell permeability and could be employed in living cell imaging for biothiols. Copyright © 2015 John Wiley & Sons, Ltd.     

Detection of mercury(II) by DNA templated gold nanoclusters based on forming thymidine–Hg2+–thymidine duplexes

We have successfully synthesized gold nanoclusters (AuNCs) templated with DNA (5′‐CCCCCCCCCCCCTTTTTT‐3′), and subsequently employed the fluorescent DNA‐AuNCs as a novel probe for sensitive detections of mercury ions (Hg²⁺). Basically, the procedure is due to the formation of thymidine–Hg²⁺–thymidine duplexes between DNA‐AuNCs and Hg²⁺, thus leading to aggregations of DNA‐AuNCs described here occurring, and facilitating their fluorescence decrease. Significantly, this decrease of fluorescent signals permitted sensitive detection of Hg²⁺ in a linear range of 0.1–100 µmol L^?1, with a detection limit of 0.083 µmol L^?1 at a signal‐to‐noise ratio of 3. Additionally, the practicality of this probe for assaying Hg²⁺ in human urine and lake water samples was further validated, and showed various advantages including simplicity, selectivity, sensitivity and low cost, demonstrating its potential to broaden ways for assaying Hg²⁺ in real samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Green synthesis of fluorescence carbon nanoparticles from yum and application in sensitive and selective detection of ATP

Fluorescent carbon nanoparticles (CPs), a fascinating class of recently discovered nanocarbons, have been widely known as some of the most promising sensing probes in biological or chemical analysis. In this study, we demonstrate a green synthetic methodology for generating water‐soluble CPs with a quantum yield of approximately 24% via a simple heating process using yum mucilage as a carbon source. The prepared carbon nanoparticles with an ~10 nm size possessed excellent fluorescence properties, and the fluorescence of the CPs was strongly quenched by Fe³⁺, and recovered by adenosine triphosphate (ATP), thus, an ‘off’ and ‘on’ system can be easily established. This ‘CPs‐Fe³⁺‐ATP’ strategy was sensitive and selective at detecting ATP with the linear range of 0.5 µmol L^?1 to 50 µmol L^?1 and with a detection limit of 0.48 µmol L^?1. Copyright © 2015 John Wiley & Sons, Ltd.     

Bovine serum albumin‐confined silver nanoclusters as fluorometric probe for detection of biothiols

Fluorescent bovine serum albumin‐confined silver nanoclusters (BSA–AgNCs) were demonstrated to be a novel and environmentally friendly probe for the rapid detection of biothiols such as cysteine (Cys), homocysteine (Hcy) and glutathione (GSH). The sensing was ascribed to the strong affinity between the mercapto group of the biothiols and the silver nanoclusters. The fluorescence intensity of BSA–AgNCs was quenched efficiently on increasing the concentration of biothiol, corresponding with a red‐shift in emission wavelength. However, the fluorescence of the silver nanoclusters was almost unchanged in the presence of other α‐amino acids at 10‐fold higher concentrations. By virtue of this specific response, a new, simple and rapid fluorescent method for detecting biothiols has been developed. The linear ranges for Cys, Hcy and GSH were 2.0 × 10^‐6 to 9.0 × 10^‐5 M (R² = 0.994), 2.0 × 10^‐6 to 1.2 × 10^‐4 M (R² = 0.996) and 1.0 × 10^‐5 to 8.0 × 10^‐5 M (R² = 0.980), respectively. The detection limits were 8.1 × 10^‐7 M for Cys, 1.0 × 10^‐6 M for Hcy and 1.1 × 10^‐6 M for GSH. Our proposed method was successfully applied to the determination of thiols in human plasma and the recovery was 94.83–105.24%. It is potentially applicable to protein‐stabilized silver nanoclusters in a chemical or biochemical sensing system. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of nucleic acid by [tetra‐(3‐methoxy‐4‐hydroxyphenyl)]–Tb3+ porphyrin as the fluorescence spectral probe in bis(2‐ethylhexyl)sulfosuccinate sodium salt micelle system

A new system for the determination of nucleic acid by rare earth metallic porphyrin of [tetra‐(3‐methoxy‐4‐hydroxyphenyl)]–Tb³⁺ [T(3‐MO‐4HP)–Tb³⁺] porphyrin as fluorescence spectral probe has been developed in this paper. Nucleic acid can enhance the fluorescence intensity of the T(3‐MO‐4HP)–Tb³⁺ porphyrin in the presence of bis(2‐ethylhexyl)sulfosuccinate sodium salt(AOT) micelle. In pH 8.00 Tris–HCl buffer solution, under optimum conditions, the enhanced fluorescence intensity is in proportion to the concentration of nucleic acids in the range of 0.05–3.00 µg mL^?1 for calf thymus DNA (ct DNA) and 0.03–4.80 µg mL^?1 for fish sperm DNA(fs DNA). Their detection limits are 0.03 and 0.01 µg mL^?1, respectively. In addition, the binding interaction mechanism between T(3‐MO‐4HP)–Tb³⁺ porphyrin and ct DNA is also investigated by resonance scattering and fluorescence spectra. The maximum binding number is calculated by molar ratio method. The new system can be used for the determination of nucleic acid in pig liver, yielding satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Utilization of inorganic carbon in the edible cyanobacterium Ge-Xian-Mi (Nostoc) and its role in alleviating photo-inhibition

The present work investigated the inorganic carbon (C_i) uptake, fluorescence quenching and photo‐inhibition of the edible cyanobacterium Ge‐Xian‐Mi (Nostoc) to obtain an insight into the role of CO₂ concentrating mechanism (CCM) operation in alleviating photo‐inhibition. Ge‐Xian‐Mi used HCO₃^– in addition to CO₂ for its photosynthesis and oxygen evolution was greater than the theoretical rates of CO₂ production derived from uncatalysed dehydration of HCO₃^–. Multiple transporters for CO₂ and HCO₃^– operated in air‐grown Ge‐Xian‐Mi. Na⁺‐dependent HCO₃^– transport was the primary mode of active C_i uptake and contributed 53–62% of net photosynthetic activity at 250 µmol L^?1 KHCO₃ and pH 8.0. However, the CO₂‐uptake systems and Na⁺‐independent HCO₃^– transport played minor roles in Ge‐Xian‐Mi and supported, respectively, 39 and 8% of net photosynthetic activity. The steady‐state fluorescence decreased and the photochemical quenching increased in response to the transport‐mediated accumulation of intracellular C_i. Inorganic carbon transport was a major factor in facilitating quenching during the initial stage and the initial rate of fluorescence quenching in the presence of iodoacetamide, an inhibitor of CO₂ fixation, was 88% of control. Both the initial rate and extent of fluorescence quenching increased with increasing external dissolved inorganic carbon (DIC) and saturated at higher than 200 µmol L^?1 HCO₃^–. The operation of the CCM in Ge‐Xian‐Mi served as a means of diminishing photodynamic damage by dissipating excess light energy and higher external DIC in the range of 100–10000 µmol L^?1 KHCO₃ was associated with more severe photo‐inhibition under strong irradiance.     

The CO2‐concentrating mechanism in the bloom‐forming cyanobacterium Microcystis aeruginosa (Cyanophyceae) and effects of UVB radiation on its operation1

The bloom‐forming cyanobacterium Microcystis aeruginosa (Kütz.) Kütz. 854 was cultured with 1.05 W · m^?2 ultraviolet‐B radiation (UVBR) for 3 h every day, and the CO₂‐concentrating mechanism (CCM) within this species as well as effects of UVBR on its operation were investigated. Microcystis aeruginosa 854 possessed at least three inorganic carbon transport systems and could utilize external HCO₃^? and CO₂ for its photosynthesis. The maximum photosynthetic rate was approximately the same, but the apparent affinity for dissolved inorganic carbon was significantly decreased from 74.7 μmol · L^?1 in the control to 34.7 μmol · L^?1 in UVBR‐treated cells. At 150 μmol · L^?1 KHCO₃ and pH 8.0, Na⁺‐dependent HCO₃^? transport contributed 43.4%–40.2% to the photosynthesis in the control and 34.5%–31.9% in UVBR‐treated cells. However, the contribution of Na⁺‐independent HCO₃^? transport increased from 8.7% in the control to 18.3% in UVBR‐treated cells. The contribution of CO₂‐uptake systems showed little difference: 47.9%–51.0% in the control and 49.8%–47.2% in UVBR‐treated cells. Thus, the rate of total inorganic carbon uptake was only marginally affected, although UVBR had a differential effect on various inorganic carbon transporters. However, the number of carboxysomes in UVBR‐treated cells was significantly decreased compared to that in the control.     

A simple and sensitive turn‐on fluorescence probe for detection of cetyltrimethylammonium bromide in aqueous samples

The interaction of acid (PTCA) with cetyltrimethylammonium bromide (CTAB) has been studied by fluorescence spectroscopy. The fluorescence of PTCA can be greatly enhanced by the addition of CTAB, due to the formation a fluorescent supramolecular compound. Under optimum conditions, the enhancement intensity of fluorescence was proportional to the concentration of CTAB over a range of 0–4.5 µmol L^?1. Its detection limit was 0.057 µmol L^?1, which was lower than reported previously. Compared with other methods that have been reported to determine CTAB, this method has high sensitivity, stability and wide linear range and it can be used satisfactorily for the determination of CTAB in aqueous samples. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐sensitivity spectrofluorimetric determination of tiopronin based on inhibition of hemoglobin

A highly sensitive and simple spectrofluorimetric method for the determination of tiopronin based on its inhibitory effect on the hemoglobin‐catalyzed reaction of H₂O₂ and l ‐tyrosine was developed. The concentration of tiopronin is linear with decreased fluorescence (ΔF) of the system under the optimal experimental conditions. The calibration graph is linear in the range 1.23 × 10^?8 to 3.06 × 10^?5 mol L^?1 with a detection limit of 6.13 × 10^?9 mol L^?1. The relative standard deviation was 4.38% for 11 determinations of 6.13 × 10^?6 mol L^?1. This method can be used for the determination of tiopronin in pharmaceuticals with satisfactory results. Copyright © 2010 John Wiley & Sons, Ltd.     

Increased synthesis of α‐tocopherol,paramylon and tyrosine by Euglena gracilis under conditions of high biomass production

Aims: To analyse the production of different metabolites by dark‐grown Euglena gracilis under conditions found to render high cell growth. Methods and Results: The combination of glutamate (5 g l^?1), malate (2 g l^?1) and ethanol (10 ml l^?1) (GM + EtOH); glutamate (7·15 g l^?1) and ethanol (10 ml l^?1); or malate (8·16 g l^?1), glucose (10·6 g l^?1) and NH₄Cl (1·8 g l^?1) as carbon and nitrogen sources, promoted an increase of 5·6, 3·7 and 2·6‐fold, respectively, in biomass concentration in comparison with glutamate and malate (GM). In turn, the production of α‐tocopherol after 120 h identified by LC‐MS was 3·7 ± 0·2, 2·4 ± 0·1 and 2 ± 0·1 mg [g dry weight (DW)]^?1, respectively, while in the control medium (GM) it was 0·72 ± 0·1 mg (g DW)^?1. For paramylon synthesis, the addition of EtOH or glucose induced a higher production. Amino acids were assayed by RP‐HPLC; Tyr a tocopherol precursor and Ala an amino acid with antioxidant activity were the amino acids synthesized at higher concentration. Conclusions: Dark‐grown E. gracilis Z is a suitable source for the generation of the biotechnologically relevant metabolites tyrosine, α‐tocopherol and paramylon. Significance and Impact of the Study: By combining different carbon and nitrogen sources and inducing a tolerable stress to the cell by adding ethanol, it was possible to increase the production of biomass, paramylon, α‐tocopherol and some amino acids. The concentrations of α‐tocopherol achieved in this study are higher than others reported previously for Euglena, plant and algal systems. This work helps to understand the effect of different carbon sources on the synthesis of bio‐molecules by E. gracilis and can be used as a basis for future works to improve the production of different metabolites of biotechnological importance by this organism.     

Fluorescence probe enhanced spectrofluorimetric method for the determination of sparfloxacin in tablets and biological fluids

Yttrium‐sensitized fluorescence was used to develop a sensitive and simple spectrofluorimetric method for the determination of sparfloxacin. The method is based on the strong fluorescence of sparfloxacin after adding the fluorescence probe yttrium in buffer solution (pH = 8), and various factors influencing fluorescence were investigated. Under optimum conditions, the enhanced fluorescence intensity of the system showed a good linear relationship with the concentration of sparfloxacin over the range 8 × 10^?7 to 1.4 × 10^?5 mol L^?1 with a correlation coefficient of 0.9997. The detection limit (S/N = 3) was determined as 9.01 × 10^?8 mol L^?1. The mechanism of the sensitizing effect of probe was discussed. This method has been successfully applied for the determination of sparfloxacin in pharmaceuticals, human urine and serum samples; the result obtained was satisfactory. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of trace amounts of dopamine by flow‐injection analysis coupled with luminol–Ag(III) complex chemiluminescence detection

A novel flow injection analysis‐direct chemiluminescence (FI‐CL) method has been developed for determination of trace amounts of dopamine (DA) based on the enhancing effect of DA on the CL reaction of luminol with an Ag(III) complex in alkaline solution. Under optimum conditions, CL intensities are proportional to the concentration of DA in the range of 1.0 × 10^?10 to 4.0 × 10^?8 mol L^?1. The detection limit is 3.0 × 10^?11 mol L^?1 for DA (3s), with a relative standard deviation (n = 13) of 2.3% for 1.0 × 10^?8 mol L^?1 DA. This method has also been applied for the determination of DA in commercial pharmaceutical injection samples. On the basis of the CL spectra and the results of the free‐radical trapping experiment of this work, a reaction mechanism for this CL reaction is proposed and discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Soil-surface carbon dioxide efflux and microbial biomass in relation to tree density 13 years after a stand replacing fire in a lodgepole pine ecosystem

The effects of fire on soil‐surface carbon dioxide (CO₂) efflux, F_S, and microbial biomass carbon, C_mic, were studied in a wildland setting by examining 13‐year‐old postfire stands of lodgepole pine differing in tree density (< 500 to > 500 000 trees ha^?1) in Yellowstone National Park (YNP). In addition, young stands were compared to mature lodgepole pine stands (～110‐year‐old) in order to estimate ecosystem recovery 13 years after a stand replacing fire. Growing season F_S increased with tree density in young stands (1.0 µmol CO₂ m^?2 s^?1 in low‐density stands, 1.8 µmol CO₂ m^?2 s^?1 in moderate‐density stands and 2.1 µmol CO₂ m^?2 s^?1 in high‐density stands) and with stand age (2.7 µmol CO₂ m^?2 s^?1 in mature stands). Microbial biomass carbon in young stands did not differ with tree density and ranged from 0.2 to 0.5 mg C g^?1 dry soil over the growing season; C_mic was significantly greater in mature stands (0.5–0.8 mg C g^?1 dry soil). Soil‐surface CO₂ efflux in young stands was correlated with biotic variables (above‐ground, below‐ground and microbial biomass), but not with abiotic variables (litter and mineral soil C and N content, bulk density and soil texture). Microbial biomass carbon was correlated with below‐ground plant biomass and not with soil carbon and nitrogen, indicating that plant activity controls not only root respiration, but C_mic pools and overall F_S rates as well. These findings support recent studies that have demonstrated the prevailing importance of plants in controlling rates of F_S and suggest that decomposition of older, recalcitrant soil C pools in this ecosystem is relatively unimportant 13 years after a stand replacing fire. Our results also indicate that realistic predictions and modeling of terrestrial C cycling must account for the variability in tree density and stand age that exists across the landscape as a result of natural disturbances.     

In vitro studies on the degradation of poly(cis‐1,4‐isoprene)

Cleavage of the backbone of poly(cis‐1,4‐isoprene) (IR) in solid rubber material was accomplished by the addition of partially purified latex clearing protein (Lcp1_VH2) using a 200‐mL enzyme reactor. Two strategies for the addition of Lcp1_VH2 were studied revealing that the daily addition of 50 µg mL^?1 of Lcp1_VH2 for 5 days was clearly a more efficient regime in comparison to a one‐time addition of 250 µg of Lcp1_VH2 at the beginning. Soluble oligo(cis‐1,4‐isoprene) molecules occurred as degradation products and were identified by ESI‐MS and GPC. Oxygenase activity of Lcp1_VH2 with solid IR particles as substrate was shown for the first time by measuring the oxygen consumption in the reaction medium. A strong decrease of the dissolved oxygen concentration was detected at the end of the assay, which indicates an increase in the number of cleavage reactions. The oligo(cis‐1,4‐isoprene) molecules comprised 1 to 11 isoprene units and exhibited an average molecular weight (M_n) of 885 g mol^?1. Isolation of the oligo(cis‐1,4‐isoprene) molecules was achieved by using silica gel column chromatography. The relative quantification of the isolated products was performed by HPLC‐MS after derivatization with 2,4‐dinitrophenilhydrazyne yielding a concentration of total degradation products of 1.62 g L^?1. Analysis of the polymer surface in samples incubated for 3 days with Lcp1_VH2 via ATR‐FTIR indicated the presence of carbonyl groups, which occurred upon the cleavage reaction. This study presents a cell‐free bioprocess as an alternative rubber treatment that can be applied for the partial degradation of the polymer. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:890–899, 2018     

Fed‐batch synthesis of galacto‐oligosaccharides with Aspergillus oryzae β‐galactosidase using optimal control strategy

Fed‐batch synthesis of galacto‐oligosaccharides (GOS) from lactose with β‐galactosidase from Aspergillus oryzae was evaluated experimentally and reaction yield was maximized via optimal control technique. The optimal lactose and enzyme feed flow rate profiles were determined using a model for GOS synthesis previously reported by the authors. Experimentally it was found that fed‐batch synthesis allowed an increase on the maximum total GOS concentration from 115 (batch synthesis) to 218 g L^?1 as consequence of the increase in total sugars concentration from 40 to 58% w/w. Such high concentration of total sugars was not attainable in batch operation because of the low solubility of lactose at the reaction temperature (40°C). Simulations predicted a GOS yield of 32.5 g g^?1 in fed‐batch synthesis under optimal conditions, while experimentally the same yield as in batch synthesis was obtained (28 g g^?1). Besides, an enrichment of total oligosaccharides in GOS with a high polymerization degree (GOS‐5 and GOS‐6) was observed in the fed‐batch synthesis. Experimental profiles for all sugars were similar to the ones predicted by simulation, which supports the use of this methodology for the optimization of GOS synthesis. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:59–67, 2014     

Metabolism in 1,3‐propanediol fed‐batch fermentation by a D‐lactate deficient mutant of Klebsiella pneumoniae

Klebsiella pneumoniae HR526, a new isolated 1,3‐propanediol (1,3‐PD) producer, exhibited great productivity. However, the accumulation of lactate in the late‐exponential phase remained an obstacle of 1,3‐PD industrial scale production. Hereby, mutants lacking D ‐lactate pathway were constructed by knocking out the ldhA gene encoding fermentative D ‐lactate dehydrogenase (LDH) of HR526. The mutant K. pneumoniae LDH526 with the lowest LDH activity was studied in aerobic fed‐batch fermentation. In experiments using pure glycerol as feedstock, the 1,3‐PD concentrations, conversion, and productivity increased from 95.39 g L^?1, 0.48 and 1.98 g L^?1 h^?1 to 102. 06 g L^?1, 0.52 mol mol^?1 and 2.13 g L^?1 h^?1, respectively. The diol (1,3‐PD and 2,3‐butanediol) conversion increased from 0.55 mol mol^?1 to a maximum of 0.65 mol mol^?1. Lactate would not accumulate until 1,3‐PD exceeded 84 g L^?1, and the final lactate concentration decreased dramatically from more than 40 g L^?1 to <3 g L^?1. Enzymic measurements showed LDH activity decreased by 89–98% during fed‐batch fermentation, and other related enzyme activities were not affected. NADH/NAD⁺ enhanced more than 50% in the late‐exponential phase as the D ‐lactate pathway was cut off, which might be the main reason for the change of final metabolites concentrations. The ability to utilize crude glycerol from biodiesel process and great genetic stability demonstrated that K. pnemoniae LDH526 was valuable for 1,3‐PD industrial production. Biotechnol. Bioeng. 2009; 104: 965–972. © 2009 Wiley Periodicals, Inc.     

Spectrofluorimetric determination of the antineoplastic agent lomustine based on the sensitizing effect of β‐cyclodextrin

The effects of solvent dipolarity/polarizability and solvent–solute hydrogen bonding on the photophysical properties of the antineoplastic drug lomustine were analysed by means of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The LSER method enabled the overall solvent effects to be quantitatively estimated and separated into specific and non‐specific contributions. The molecular encapsulation of lomustine by β‐cyclodextrin (β‐CD) has been studied using fluorescence spectroscopy. The results are discussed in terms of the binding parameter and the effect of the solvent used. It was concluded that β‐CD forms a 1:1 inclusional complex with lomustine in acetonitrile solution and its association constant was calculated to be 500 M^?1. In addition, and for the first time, a simple, rapid and high sensitive fluorimetric method for the determination of lomustine was developed based upon the enhancement effect produced through complex formation with β‐CD. The new approach for the quantification of lomustine in the presence of β‐CD was described in aqueous and organic solutions. Better limits of detection (0.31 µg ml^?1) and quantification (1.05 µg ml^?1) were obtained in aqueous solution with respect to those obtained in organic solvent. Copyright © 2015 John Wiley & Sons, Ltd.     

High-temperature inhibition of photosynthesis is greater under sunflecks than uniform irradiance in a tropical rain forest tree seedling

The survival of dipterocarp seedlings in the understorey of south‐east Asian rain forests is limited by their ability to maintain a positive carbon balance. Photosynthesis during sunflecks is an important component of carbon gain. Field measurements demonstrated that Shorea leprosula seedlings in a rain forest understorey received a high proportion of daily photon flux density at temperatures supra‐optimal for photosynthesis (72% at ≥30 °C, 14% at ≥35 °C). To investigate the effect of high temperatures on photosynthesis during sunflecks, gas exchange and chlorophyll fluorescence measurements were made on seedlings grown in controlled environment conditions either, under uniform, saturating irradiance (approximately 539 µmol m^?2 s^?1) or, shade/fleck sequences (approximately 30 µmol m^?2 s^?1/approximately 525 µmol m^?2 s^?1) at two temperatures, 28 or 38 °C. The rate of light‐saturated photosynthesis, under uniform irradiance, was inhibited by 40% at 38 °C compared with 28 °C. However, during the shade/fleck sequence, photosynthesis was inhibited by 59% at 38 °C compared with 28 °C. The greater inhibition of photosynthesis during the shade/fleck sequence, when compared with uniform irradiance, was driven by the lower efficiency of dynamic photosynthesis combined with lower steady‐state rates of photosynthesis. These results suggest that, contrary to current dogma, sunfleck activity may not always result in significant carbon gain. This has important consequences for seedling regeneration processes in tropical forests as well as for leaves in other canopy positions where sunflecks make an important contribution to total photon flux density.     

Microbial production of conjugated γ‐linolenic acid from γ‐linolenic acid by Lactobacillus plantarum AKU 1009a

Aims: Optimal production conditions of conjugated γ‐linolenic acid (CGLA) from γ‐linolenic acid using washed cells of Lactobacillus plantarum AKU 1009a as catalysts were investigated. Methods and Results: Washed cells of Lact. plantarum AKU 1009a exhibiting a high level of CGLA productivity were obtained by cultivation in a nutrient medium supplemented with 0·03% (w/v) α‐linolenic acid as an inducer. Under the optimal reaction conditions with 13 mg ml^?1γ‐linolenic acid as a substrate in 5 ‐ml reaction volume, the washed cells [32% (wet cells, w/v) corresponding to 46 mg ml^?1 dry cells] as the catalysts produced 8·8 mg CGLA per millilitre reaction mixture (68% molar yield) in 27 h. The produced CGLA was a mixture of two isomers, i.e., cis‐6,cis‐9,trans‐11‐octadecatrienoic acid (CGLA1, 40% of total CGLA) and cis‐6,trans‐9,trans‐11‐octadecatrienoic acid (CGLA2, 60% of total CGLA), and accounted for 66% of total fatty acid obtained. The CGLA produced was obtained as free fatty acids adsorbed mostly on the surface of the cells of Lact. plantarum AKU1009a. Conclusion: The practical process of CGLA production from γ‐linolenic acid using washed cells of Lact. plantarum AKU 1009a was successfully established. Significance and Impact of the Study: We presented the first example of microbial production of CGLA. CGLA produced by the process is valuable for evaluating their physiological and nutritional effects, and chemical characteristics.