Composition and molecular weight of pili purified from Pseudomonas aeruginosa K.

Pseudomonas aeruginosa strain K (PAK) bears polar pili that promote infection by at least six bacteriophages. Moreover, a recently isolated mutant of strain K (PAK/2PfS) is many times more piliated than the wild-type strain and facilitates the preparation of large amounts of pure pili for biochemical studies. The present investigation was carried out to establish the structural relatedness of PAK and PAK/2PfS pili and to determine their biochemical composition. A purfication procedure is described for PAK and PAK/2PfS pili that yields about 8 mg of pure pili per 100 g (wet weight) of PAK/2PfS cells and 0.8 mg of pure pili per 100 g (wet weight) of PAK cells. PAK and PAK/2PfS pili were found to be free from phosphate, carbohydrate, and lipid and to contain a single polypeptide subunit of 17,800 daltons. Isopycnic centrifugation studies revealed that PAK and PAK(2PfS pili have the same buoyant density in sucrose (1.221) and CsC1 (1.295). Both types of pili banded at pH 3.9 when subjected to isoelectric focusing. Amino acid analyses showed that PAK and PAK/2PfS pili have identical amino acid compositions, whereas microimmunodiffusion studies revealed that the two types of pili are immunologically indistinguishable. It was concluded that PAK and PAK/2PfS pili are identical and that the mutation responsible for producing the multipiliated state in PAK/2PfS is probably located outside the structural gene for PAK pili.     

Pseudomonas aeruginosa Type IV pilus expression in Neisseria gonorrhoeae: effects of pilin subunit composition on function and organelle dynamics

Type IV pili (TFP) play central roles in the expression of many phenotypes including motility, multicellular behavior, sensitivity to bacteriophages, natural genetic transformation, and adherence. In Neisseria gonorrhoeae, these properties require ancillary proteins that act in conjunction with TFP expression and influence organelle dynamics. Here, the intrinsic contributions of the pilin protein itself to TFP dynamics and associated phenotypes were examined by expressing the Pseudomonas aeruginosa PilA(PAK) pilin subunit in N. gonorrhoeae. We show here that, although PilA(PAK) pilin can be readily assembled into TFP in this background, steady-state levels of purifiable fibers are dramatically reduced relative those of endogenous pili. This defect is due to aberrant TFP dynamics as it is suppressed in the absence of the PilT pilus retraction ATPase. Functionally, PilA(PAK) pilin complements gonococcal adherence for human epithelial cells but only in a pilT background, and this property remains dependent on the coexpression of both the PilC adhesin and the PilV pilin-like protein. Since P. aeruginosa pilin only moderately supports neisserial sequence-specific transformation despite its assembly proficiency, these results together suggest that PilA(PAK) pilin functions suboptimally in this environment. This appears to be due to diminished compatibility with resident proteins essential for TFP function and dynamics. Despite this, PilA(PAK) pili support retractile force generation in this background equivalent to that reported for endogenous pili. Furthermore, PilA(PAK) pili are both necessary and sufficient for bacteriophage PO4 binding, although the strain remains phage resistant. Together, these findings have significant implications for TFP biology in both N. gonorrhoeae and P. aeruginosa.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two serologically distinct populations of pili on each cell. Simultaneous production of both indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

Mapping the surface regions of Pseudomonas aeruginosa PAK pilin: the importance of the C-terminal region for adherence to human buccal epithelial cells

The adherence of non-mucoid Pseudomonas aeruginosa strains is believed to be mediated by the pilus, which consists of a single protein subunit of 15,000 Daltons called pilin. Ten antipeptide antisera were raised to map the surface regions of pilin from P. aeruginosa strain K (PAK). Only one of the antipeptide antisera to the eight predicted surface regions failed to react with PAK pili in direct ELISA. Five out of eight synthetic peptides representing the eight predicted surface regions reacted with anti-PAK pilus antiserum, indicating their surface exposure. Combining the antipeptide and antipilus antisera results, all eight predicted surface regions were demonstrated to be surface-exposed. The PAK 128-144-OH peptide produced the best binding antiserum to PAK pili. Only antipeptide Fab fragments directed against the disulphide bridged C-terminal region of PAK pilin blocked the adherence of pili to human buccal epithelial cells, which suggests that this region contains the receptor-binding domain of the PAK pilus.     

Crystallographic analysis of the Pseudomonas aeruginosa strain K122-4 monomeric pilin reveals a conserved receptor-binding architecture

Adherence of pathogens to host cells is critical for the initiation of infection and is thus an attractive target for anti-infective therapeutics and vaccines. In the opportunistic human pathogen Pseudomonas aeruginosa, host-cell adherence is achieved predominantly by type IV pili. Analysis of several clinical strains of P. aeruginosa reveals poor sequence conservation between pilin genes, including the residues in the receptor-binding site. Interestingly, the receptor-binding sites appear to retain a conserved surface epitope because all Pseudomonas type IV pili recognize the same receptor on the host cell and cross-reactive antibodies specific for the receptor-binding site exist. Here, we present the crystallographic analysis of two crystal forms of truncated pilin from P. aeruginosa strain K122-4 (DeltaK122-4) at 1.54 and 1.8 A resolution, respectively. The DeltaK122-4 structure is compared to other crystallographically determined type IV pilin structures and an NMR structure of DeltaK122-4 pilin. A comparison with the structure of the highly divergent P. aeruginosa strain K (DeltaPAK) pilin indicates that the receptor-binding loop in both pilins forms a shallow depression with a surface that is formed by main-chain atoms. Conservation of this putative binding site is independent of the sequence as long as the main-chain conformation is conserved and could therefore explain the shared receptor specificity and antibody cross reactivity of highly divergent Pseudomonas type IV pilins.     

DNA binding: a novel function of Pseudomonas aeruginosa type IV pili

The opportunistic pathogen Pseudomonas aeruginosa produces multifunctional, polar, filamentous appendages termed type IV pili. Type IV pili are involved in colonization during infection, twitching motility, biofilm formation, bacteriophage infection, and natural transformation. Electrostatic surface analysis of modeled pilus fibers generated from P. aeruginosa strain PAK, K122-4, and KB-7 pilin monomers suggested that a solvent-exposed band of positive charge may be a common feature of all type IV pili. Several functions of type IV pili, including natural transformation and biofilm formation, involve DNA. We investigated the ability of P. aeruginosa type IV pili to bind DNA. Purified PAK, K122-4, and KB-7 pili were observed to bind both bacterial plasmid and salmon sperm DNA in a concentration-dependent and saturable manner. PAK pili had the highest affinity for DNA, followed by K122-4 and KB-7 pili. DNA binding involved backbone interactions and preferential binding to pyrimidine residues even though there was no evidence of sequence-specific binding. Pilus-mediated DNA binding was a function of the intact pilus and thus required elements present in the quaternary structure. However, binding also involved the pilus tip as tip-specific, but not base-specific, antibodies inhibited DNA binding. The conservation of a Thr residue in all type IV pilin monomers examined to date, along with the electrostatic data, implies that DNA binding is a conserved function of type IV pili. Pilus-mediated DNA binding could be important for biofilm formation both in vivo during an infection and ex vivo on abiotic surfaces.     

Phase variation of gonococcal pili by frameshift mutation in pilC, a novel gene for pilus assembly.

Pili prepared from Neisseria gonorrhoeae contain minor amounts of a 110 kd outer membrane protein denoted PilC. The corresponding gene exists in two copies, pilC1 and pilC2, in most strains of N.gonorrhoeae. In the piliated strain MS11(P+), only one of the genes, pilC2, was expressed. Inactivation of pilC2 by a mTnCm insertion resulted in a nonpiliated phenotype, while a mTnCm insertion in pilC1 had no effect on piliation. Expression of pilC was found to be controlled at the translational level by frameshift mutations in a run of G residues positioned in the region encoding the signal peptide. Nonpilated (P-), pilin expressing colony variants that did not express detectable levels of PilC were selected; all P+ backswitchers from these P-, PilC- clones were found to be PilC+. The structural gene for pilin, pilE, was sequenced and found to be identical in one P-, PilC- and P+, PilC+ pair. Most PilC- cells were completely bald whereas the PilC+ backswitcher had 10-40 pili per cell. Thus, a turn ON and turn OFF in the expression of PilC results in gonococcal pili phase variation. These results suggest that PilC is required for pilus assembly and/or translocation across the gonococcal outer membrane.     

Products of three accessory genes, pilB, pilC, and pilD, are required for biogenesis of Pseudomonas aeruginosa pili.

The polar pili of Pseudomonas aeruginosa are composed of monomers of the pilin structural subunits. The biogenesis of pili involves the synthesis of pilin precursor, cleavage of a six-amino-acid leader peptide, membrane translocation, and assembly of monomers into a filamentous structure extending from the bacterial surface. This report describes three novel genes necessary for the formation of pili. DNA sequences adjacent to pilA, the pilin structural gene, were cloned and mutagenized with transposon Tn5. Each of the insertions were introduced into the chromosome of P. aeruginosa PAK by gene replacement. The effect of the Tn5 insertions in the bacterial chromosome on pilus assembly was assessed by electron microscopy and sensitivity of mutants to a pilus-specific bacteriophage. The resultant mutants were also tested for synthesis and membrane localization of the pilin antigen in order to define the genes required for maturation, export, and assembly of pilin. A 4.0-kilobase-pair region of DNA adjacent to the pilin structural gene was found to be essential for formation of pili. This region was sequenced and found to contain three open reading frames coding for 62-, 38- to 45-, and 28- to 32-kilodalton proteins (pilB, pilC, and pilD, respectively). Three proteins of similar molecular weight were expressed in Escherichia coli from the 4.0-kilobase-pair fragment flanking pilA with use of a T7 promoter-polymerase expression system. The results of the analyses of the three genes and the implications for pilin assembly and maturation are discussed.     

The Pseudomonas aeruginosa type IV pilin receptor binding domain functions as an adhesin for both biotic and abiotic surfaces

Pseudomonas aeruginosa readily binds to stainless steel and other abiotic surfaces, causing major problems in both the medical and food industries. In this study, we show that P. aeruginosa binds to abiotic surfaces in a concentration-dependent, saturable manner during the initial stages of biofilm formation. P. aeruginosa type IV pili mediate binding to stainless steel as a pilus-deficient strain does not bind to steel, purified type IV pili bound in a concentration-dependent, saturable manner, and purified pili competitively inhibited whole cell binding. PAK pili can also bind polystyrene and polyvinylchloride in a concentration-dependant and saturable manner. As an antibody specific for the C-terminal pilin receptor binding domain inhibited adherence to abiotic surfaces, the role of the C-terminal receptor binding domain in mediating binding to steel surfaces was examined. A synthetic peptide of the PAK pilin epithelial cell receptor binding domain [PAK(128-144)ox] bound directly to steel with high affinity. The interaction of pili with steel was specifically inhibited by this peptide with an apparent Ki of approximately 0.2 nM and effectively inhibited the binding of viable homologous and heterologous P. aeruginosa strains to steel with an apparent Ki of approximately 4 nM. A single point mutation (K130I) in the PAO receptor binding domain was observed to abolish binding to stainless steel while binding to human buccal epithelial cells was enhanced. Therefore, the C-terminal receptor binding domain appears to have evolved for binding a variety of surfaces.     

Cloning and expression of the pilin gene of Pseudomonas aeruginosa PAK in Escherichia coli.

Many strains of Pseudomonas aeruginosa possess pili which have been implicated in the pathogenesis of the organism. This report presents the cloning and expression in Escherichia coli of the gene encoding the structural subunit of the pili of P. aeruginosa PAK. Total DNA from this strain was partially digested with Sau3A and inserted into the cloning vector pUC18. Recombinant E. coli clones were screened with oligonucleotide probes prepared from the constant region of the previously published amino acid sequence of the mature pilin subunit. Several positive clones were identified, and restriction maps were generated. Each clone contained an identical 1.1-kilobase HindIII fragment which hybridized to the oligonucleotide probes. Western blot analysis showed that all of the clones expressed small amounts of the P. aeruginosa pilin subunit, which has a molecular mass of ca. 18,000. This expression occurred independently of the orientation of the inserted DNA fragments in the cloning vector, indicating that synthesis was directed from an internal promoter. However, subclones containing the 1.1-kilobase HindIII fragment in a specific orientation produced an order of magnitude more of the pilin subunit. While the expressed pilin antigen was located in both the cytoplasmic and outer membrane fractions of E. coli, none appeared to be polymerized into a pilus structure.     

The preparation and properties of gonococcal pili.

Pili have been isolated from Neisseria gonorrhoeae by controlled homogenization followed by selective disaggregation in sucrose and purification by CsCl density gradient centrifugation. Pili from six gonococcal strains had buoyant densities of 1-30 to 1-31 g ml-1 on CsCl. The pili were immunologically distinct when tested with rabbit antisera to purified pili. The amino acid composition of pilin from strains P9 and 201 was very similar, consisting of 208 and 212 amino acid residues respectively giving molecular weights of 22 600 and 22352. The pili contained a high proportion (46%) of non-polar amino acids. Further analysis of strain P9 pili revealed the presence of 1 to 2 phosphate groups and 1 to 2 hexose groups per pilin subunit; no amino sugars were detected. Pili from strain P9 were resolved into two bands by equilibrium density gradient centrifugation or column isoelectric focusing, suggesting the presence of more than one kind of pilus.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are Introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two seroiogically distinct populations of pili on each cell. Simultaneous production of both Indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of Interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

Nucleotide sequence of the structural gene for class I pilin from Neisseria meningitidis: homologies with the pilE locus of Neisseria gonorrhoeae

The nucleotide sequence has been determined for the expressed pilin (pilE) locus of Neisseria meningitidis strain C311 which produces class I pili that are antigenically and structurally similar to those of gonococci. The deduced amino acid sequence of the N. meningitidis pilE translation product contains a 7 amino acid N-terminal pre-pilin leader sequence which is identical to that found in gonococcal pilin and which is characteristic of N-methylphenylalanine pili in general. The succeeding N-terminal 53 amino acids are identical to those found in the equivalent position in antigenically variant gonococcal pilins and confirm direct peptide sequencing of the amino-terminus of at least one type of meningococcal pilin. Other regions that are conserved in variant pilin polypeptides from Neisseria gonorrhoeae are conserved at the amino acid level in the class I meningococcal pilin but the coding DNA contains numerous base substitutions when compared with the equivalent gonococcal pil sequence. Sequences extending downstream for about 140 bp on the 3' side of the coding region for both pilin genes are only about 85% homologous.     

Expression of the Pseudomonas aeruginosa PAK pilin gene in Escherichia coli.

Pseudomonas aeruginosa is a piliated opportunistic pathogen. We have recently reported the cloning of the structural gene for the pilus protein, pilin, from P. aeruginosa PAK (B. L. Pasloske, B. B. Finlay, and W. Paranchych, FEBS Lett. 183:408-412, 1985), and in this paper we present evidence that this chimera (pBP001) expresses P. aeruginosa PAK pilin in Escherichia coli independent of a vector promoter. The strength of the promoter for the PAK pilin gene was assayed, and the cellular location of the pilin protein within E. coli was examined. This protein was present mainly in the inner membrane fraction both with and without its six-amino-acid leader sequence, but it was not assembled into pili.     

Spectral properties of three quaternary arrangements of Pseudomonas pilin

Pseudomonas aeruginosa possess multisubunit, filamentous appendages called pili which are involved in adhesion, twitching motility, and bacteriophage adsorption. The spectral properties of three forms of pili have been compared. These are native pili, pilin dimers in octyl glycoside, and an in vitro assembled form of pilin which we call reassembled pilin filaments. Alkaline pH titrations, solvent perturbation, quenching of tryptophan fluorescence with acrylamide, and circular dichroism were used to demonstrate that tyrosines-24 and -27 are at a dimer/dimer interface in both native pili and in the reassembled pilin filaments. Dissociation of pili by octyl glucoside results in exposure of the two tyrosines and in partial exposure of a least one tryptophan in pilin.