Crystal structure of Pseudomonas aeruginosa PAK pilin suggests a main-chain-dominated mode of receptor binding

Fibers of pilin monomers (pili) form the dominant adhesin of Pseudomonas aeruginosa, and they play an important role in infections by this opportunistic bacterial pathogen. Blocking adhesion is therefore a target for vaccine development. The receptor-binding site is located in a C-terminal disulphide-bonded loop of each pilin monomer, but functional binding sites are displayed only at the tip of the pilus. A factor complicating vaccination is that different bacterial strains produce distinct, and sometimes highly divergent, pilin variants. It is surprising that all strains still appear to bind a common receptor, asialo-GM1. Here, we present the 1.63 A crystal structure of pilin from P. aeruginosa strain PAK. The structure shows that the proposed receptor-binding site is formed by two beta-turns that create a surface dominated by main-chain atoms. Receptor specificity could therefore be maintained, whilst allowing side-chain variation, if the main-chain conformation is conserved. The location of the binding site relative to the proposed packing of the pilus fiber raises new issues and suggests that the current fiber model may have to be reconsidered. Finally, the structure of the C-terminal disulphide-bonded loop will provide the template for the structure-based design of a consensus sequence vaccine.     

DNA binding: a novel function of Pseudomonas aeruginosa type IV pili

The opportunistic pathogen Pseudomonas aeruginosa produces multifunctional, polar, filamentous appendages termed type IV pili. Type IV pili are involved in colonization during infection, twitching motility, biofilm formation, bacteriophage infection, and natural transformation. Electrostatic surface analysis of modeled pilus fibers generated from P. aeruginosa strain PAK, K122-4, and KB-7 pilin monomers suggested that a solvent-exposed band of positive charge may be a common feature of all type IV pili. Several functions of type IV pili, including natural transformation and biofilm formation, involve DNA. We investigated the ability of P. aeruginosa type IV pili to bind DNA. Purified PAK, K122-4, and KB-7 pili were observed to bind both bacterial plasmid and salmon sperm DNA in a concentration-dependent and saturable manner. PAK pili had the highest affinity for DNA, followed by K122-4 and KB-7 pili. DNA binding involved backbone interactions and preferential binding to pyrimidine residues even though there was no evidence of sequence-specific binding. Pilus-mediated DNA binding was a function of the intact pilus and thus required elements present in the quaternary structure. However, binding also involved the pilus tip as tip-specific, but not base-specific, antibodies inhibited DNA binding. The conservation of a Thr residue in all type IV pilin monomers examined to date, along with the electrostatic data, implies that DNA binding is a conserved function of type IV pili. Pilus-mediated DNA binding could be important for biofilm formation both in vivo during an infection and ex vivo on abiotic surfaces.     

Assembly of mutant pilins in Pseudomonas aeruginosa: formation of pili composed of heterologous subunits.

Recently, we reported the degree of N-terminal processing within the cytoplasmic membranes of three mutant pilins from Pseudomonas aeruginosa PAK with respect to leader peptide removal and the methylation of the N-terminal phenylalanine (B. L. Pasloske and W. Paranchych, Mol. Microbiol. 2:489-495, 1988). The results of those experiments showed that the deletion of 4 or 8 amino acids within the highly conserved N terminus greatly inhibited leader peptide removal. On the other hand, the mutation of the glutamate at position 5 to a lysine permitted leader peptide cleavage but inhibited transmethylase activity. In this report, we have examined the effects of these mutant pilins upon pilus assembly in a P. aeruginosa PAO host with or without the chromosomally encoded pilin gene present. Pilins with deletions of 4 or 8 amino acids in the N-terminal region were not incorporated into pili. Interestingly, pilin subunits containing the glutamate-to-lysine mutation were incorporated into compound pili together with PAO wild-type subunits. However, the mutant pilins were unable to polymerize as a homopolymer. When wild-type PAK and PAO pilin subunits were expressed in the same bacterial strain, the pilin subunits assembled into homopolymeric pili containing one or the other type of subunit.     

Pseudomonas aeruginosa D-arabinofuranose biosynthetic pathway and its role in type IV pilus assembly

Pseudomonas aeruginosa strains PA7 and Pa5196 glycosylate their type IVa pilins with α1,5-linked D-arabinofuranose (d-Araf), a rare sugar configuration identical to that found in cell wall polymers of the Corynebacterineae. Despite this chemical identity, the pathway for biosynthesis of α1,5-D-Araf in Gram-negative bacteria is unknown. Bioinformatics analyses pointed to a cluster of seven P. aeruginosa genes, including homologues of the Mycobacterium tuberculosis genes Rv3806c, Rv3790, and Rv3791, required for synthesis of a polyprenyl-linked d-ribose precursor and its epimerization to D-Araf. Pa5196 mutants lacking the orthologues of those genes had non-arabinosylated pilins, poor twitching motility, and significantly fewer surface pili than the wild type even in a retraction-deficient (pilT) background. The Pa5196 pilus system assembled heterologous non-glycosylated pilins efficiently, demonstrating that it does not require post-translationally modified subunits. Together the data suggest that pilins of group IV strains need to be glycosylated for productive subunit-subunit interactions. A recombinant P. aeruginosa PAO1 strain co-expressing the genes for d-Araf biosynthesis, the pilin modification enzyme TfpW, and the acceptor PilA(IV) produced arabinosylated pili, confirming that the Pa5196 genes identified are both necessary and sufficient. A P. aeruginosa epimerase knock-out could be complemented with the corresponding Mycobacterium smegmatis gene, demonstrating conservation between the systems of the Corynebacterineae and Pseudomonas. This work describes a novel Gram-negative pathway for biosynthesis of d-Araf, a key therapeutic target in Corynebacterineae.     

Glycosylation of Pseudomonas aeruginosa strain Pa5196 type IV pilins with mycobacterium-like alpha-1,5-linked d-Araf oligosaccharides

Pseudomonas aeruginosa is a gram-negative bacterium that uses polar type IV pili for adherence to various materials and for rapid colonization of surfaces via twitching motility. Within the P. aeruginosa species, five distinct alleles encoding variants of the structural subunit PilA varying in amino acid sequence, length, and presence of posttranslational modifications have been identified. In this work, a combination of mass spectrometry and nuclear magnetic resonance spectroscopy was used to identify a novel glycan modification on the pilins of the group IV strain Pa5196. Group IV pilins continued to be modified in a lipopolysaccharide (wbpM) mutant of Pa5196, showing that, unlike group I strains, the pilins of group IV are not modified with the O-antigen unit of the background strain. Instead, the pilin glycan was determined to be an unusual homo-oligomer of alpha-1,5-linked d-arabinofuranose (d-Araf). This sugar is uncommon in prokaryotes, occurring mainly in the cell wall arabinogalactan and lipoarabinomannan (LAM) polymers of mycobacteria, including Mycobacterium tuberculosis and Mycobacterium leprae. Antibodies raised against M. tuberculosis LAM specifically identified the glycosylated pilins from Pa5196, confirming that the glycan is antigenically, as well as chemically, identical to those of Mycobacterium. P. aeruginosa Pa5196, a rapidly growing strain of low virulence that expresses large amounts of glycosylated type IV pilins on its surface, represents a genetically tractable model system for elucidation of alternate pathways for biosynthesis of d-Araf and its polymerization into mycobacterium-like alpha-1,5-linked oligosaccharides.     

Modification of Pseudomonas aeruginosa Pa5196 type IV Pilins at multiple sites with D-Araf by a novel GT-C family Arabinosyltransferase, TfpW

Pseudomonas aeruginosa Pa5196 produces type IV pilins modified with unusual alpha1,5-linked d-arabinofuranose (alpha1,5-D-Araf) glycans, identical to those in the lipoarabinomannan and arabinogalactan cell wall polymers from Mycobacterium spp. In this work, we identify a second strain of P. aeruginosa, PA7, capable of expressing arabinosylated pilins and use a combination of site-directed mutagenesis, electrospray ionization mass spectrometry (MS), and electron transfer dissociation MS to identify the exact sites and extent of pilin modification in strain Pa5196. Unlike previously characterized type IV pilins that are glycosylated at a single position, those from strain Pa5196 were modified at multiple sites, with modifications of alphabeta-loop residues Thr64 and Thr66 being important for normal pilus assembly. Trisaccharides of alpha1,5-D-Araf were the principal modifications at Thr64 and Thr66, with additional mono- and disaccharides identified on Ser residues within the antiparallel beta sheet region of the pilin. TfpW was hypothesized to encode the pilin glycosyltransferase based on its genetic linkage to the pilin, weak similarity to membrane-bound GT-C family glycosyltransferases (which include the Mycobacterium arabinosyltransferases EmbA/B/C), and the presence of characteristic motifs. Loss of TfpW or mutation of key residues within the signature GT-C glycosyltransferase motif completely abrogated pilin glycosylation, confirming its involvement in this process. A Pa5196 pilA mutant complemented with other Pseudomonas pilins containing potential sites of modification expressed nonglycosylated pilins, showing that TfpW's pilin substrate specificity is restricted. TfpW is the prototype of a new type IV pilin posttranslational modification system and the first reported gram-negative member of the GT-C glycosyltransferase family.     

Backbone dynamics of receptor binding and antigenic regions of a Pseudomonas aeruginosa pilin monomer

Pilin is the major structural protein that forms type IV pili of various pathogenic bacteria, including Pseudomonas aeruginosa. Pilin is involved in attachment of the bacterium to host cells during infection, in the initiation of immune response, and serves as a receptor for a variety of bacteriophage. We have used (15)N nuclear magnetic resonance relaxation measurements to probe the backbone dynamics of an N-terminally truncated monomeric pilin from P. aeruginosa strain K122-4. (15)N-T(1), -T(2), and [(1)H]-(15)N nuclear Overhauser enhancement measurements were carried out at three magnetic field strengths. The measurements were interpreted using the Lipari-Szabo model-free analysis, which reveals the amplitude of spatial restriction for backbone N-NH bond vectors with respect to nano- to picosecond time-scale motions. Regions of well-defined secondary structure exhibited consistently low-amplitude spatial fluctuations, while the terminal and loop regions showed larger amplitude motions in the subnano- to picosecond time-scale. Interestingly, the C-terminal disulfide loop region that contains the receptor binding domain was found to be relatively rigid on the pico- to nanosecond time-scale but exhibited motion in the micro- to millisecond time-scale. It is notable that this disulfide loop displays a conserved antigenic epitope and mediates binding to the asialo-GM(1) cell surface receptor. The present study suggests that a rigid backbone scaffold mediates attachment to the host cell receptor, and also maintains the conformation of the conserved antigenic epitope for antibody recognition. In addition, slower millisecond time-scale motions are likely to be crucial for conferring a range of specificity for these interactions. Characterization of pilin dynamics will aid in developing a detailed understanding of infection, and will facilitate the design of more efficient anti-adhesin synthetic vaccines and therapeutics against pathogenic bacteria containing type IV pili.     

Neisseria meningitidis Type IV Pili Composed of Sequence Invariable Pilins Are Masked by Multisite Glycosylation

The ability of pathogens to cause disease depends on their aptitude to escape the immune system. Type IV pili are extracellular filamentous virulence factors composed of pilin monomers and frequently expressed by bacterial pathogens. As such they are major targets for the host immune system. In the human pathogen Neisseria meningitidis, strains expressing class I pilins contain a genetic recombination system that promotes variation of the pilin sequence and is thought to aid immune escape. However, numerous hypervirulent clinical isolates express class II pilins that lack this property. This raises the question of how they evade immunity targeting type IV pili. As glycosylation is a possible source of antigenic variation it was investigated using top-down mass spectrometry to provide the highest molecular precision on the modified proteins. Unlike class I pilins that carry a single glycan, we found that class II pilins display up to 5 glycosylation sites per monomer on the pilus surface. Swapping of pilin class and genetic background shows that the pilin primary structure determines multisite glycosylation while the genetic background determines the nature of the glycans. Absence of glycosylation in class II pilins affects pilus biogenesis or enhances pilus-dependent aggregation in a strain specific fashion highlighting the extensive functional impact of multisite glycosylation. Finally, molecular modeling shows that glycans cover the surface of class II pilins and strongly decrease antibody access to the polypeptide chain. This strongly supports a model where strains expressing class II pilins evade the immune system by changing their sugar structure rather than pilin primary structure. Overall these results show that sequence invariable class II pilins are cloaked in glycans with extensive functional and immunological consequences.     

Type IV pilus genes pilA and pilC of Pseudomonas stutzeri are required for natural genetic transformation, and pilA can be replaced by corresponding genes from nontransformable species

Pseudomonas stutzeri lives in terrestrial and aquatic habitats and is capable of natural genetic transformation. After transposon mutagenesis, transformation-deficient mutants were isolated from a P. stutzeri JM300 strain. In one of them a gene which coded for a protein with 75% amino acid sequence identity to PilC of Pseudomonas aeruginosa, an accessory protein for type IV pilus biogenesis, was inactivated. The presence of type IV pili was demonstrated by susceptibility to the type IV pilus-dependent phage PO4, by occurrence of twitching motility, and by electron microscopy. The pilC mutant had no pili and was defective in twitching motility. Further sequencing revealed that pilC is clustered in an operon with genes homologous to pilB and pilD of P. aeruginosa, which are also involved in pilus formation. Next to these genes but transcribed in the opposite orientation a pilA gene encoding a protein with high amino acid sequence identity to pilin, the structural component of type IV pili, was identified. Insertional inactivation of pilA abolished pilus formation, PO4 plating, twitching motility, and natural transformation. The amounts of (3)H-labeled P. stutzeri DNA that were bound to competent parental cells and taken up were strongly reduced in the pilC and pilA mutants. Remarkably, the cloned pilA genes from nontransformable organisms like Dichelobacter nodosus and the PAK and PAO strains of P. aeruginosa fully restored pilus formation and transformability of the P. stutzeri pilA mutant (along with PO4 plating and twitching motility). It is concluded that the type IV pili of the soil bacterium P. stutzeri function in DNA uptake for transformation and that their role in this process is not confined to the species-specific pilin.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two serologically distinct populations of pili on each cell. Simultaneous production of both indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

Structure of a pilin monomer from Pseudomonas aeruginosa: implications for the assembly of pili

Type IV pilin monomers assemble to form fibers called pili that are required for a variety of bacterial functions. Pilin monomers oligomerize due to the interaction of part of their hydrophobic N-terminal alpha-helix. Engineering of a truncated pilin from Pseudomonas aeruginosa strain K122-4, where the first 28 residues are removed from the N terminus, yields a soluble, monomeric protein. This truncated pilin is shown to bind to its receptor and to decrease morbidity and mortality in mice upon administration 15 min before challenge with a heterologous strain of Pseudomonas. The structure of this truncated pilin reveals an alpha-helix at the N terminus that lies across a 4-stranded antiparallel beta-sheet. A model for a pilus is proposed that takes into account both electrostatic and hydrophobic interactions of pilin subunits as well as previously published x-ray fiber diffraction data. Our model indicates that DNA or RNA cannot pass through the center of the pilus, however, the possibility exists for small organic molecules to pass through indicating a potential mechanism for signal transduction.     

Type IV pilin structure and assembly: X-ray and EM analyses of Vibrio cholerae toxin-coregulated pilus and Pseudomonas aeruginosa PAK pilin

Pilin assembly into type IV pili is required for virulence by bacterial pathogens that cause diseases such as cholera, pneumonia, gonorrhea, and meningitis. Crystal structures of soluble, N-terminally truncated pilin from Vibrio cholera toxin-coregulated pilus (TCP) and full-length PAK pilin from Pseudomonas aeruginosa reveal a novel TCP fold, yet a shared architecture for the type IV pilins. In each pilin subunit a conserved, extended, N-terminal alpha helix wrapped by beta strands anchors the structurally variable globular head. Inside the assembled pilus, characterized by cryo-electron microscopy and crystallography, the extended hydrophobic alpha helices make multisubunit contacts to provide mechanical strength and flexibility. Outside, distinct interactions of adaptable heads contribute surface variation for specificity of pilus function in antigenicity, motility, adhesion, and colony formation.     

Pseudomonas aeruginosa pilin activates the inflammasome

IL-1β is produced from inactive pro-IL-1β by activation of caspase-1 brought about by a multi-subunit protein platform called the inflammasome. Many bacteria can trigger inflammasome activity through flagellin activation of the host protein NLRC4. However, strains of the common human pathogen Pseudomonas aeruginosa lacking flagellin can still activate the inflammasome. We set out to identify what non-flagellin components could produce this activation. Using mass spectroscopy, we identified an inflammasome-activating factor from P. aeruginosa as pilin, the major component of the type IV bacterial pilus. Purified pilin introduced into mouse macrophages by liposomal delivery activated caspase-1 and led to secretion of mature IL-1β, as did recombinant pilin purified from Escherichia coli. This was dependent on caspase-1 but not on the host inflammasome proteins NLRC4, NLRP3 or ASC. Mutants of P. aeruginosa strain PA103 lacking pilin did not activate the inflammasome following infection of macrophages with live bacteria. Type III secretion remained intact in the absence of pili, showing this was not due to a lack of effector delivery. Our observations show pilin is a novel activator of the inflammasome in addition to flagellin and the recently described PrgJ protein family, the basal body rod component of the type III apparatus.     

Genetic and functional evidence that Type IV pili are required for social gliding motility in Myxococcus xanthus

The social gliding behaviour of Myxococcus xanthus has previously been associated with the presence of polar pili. A Tn 5 transposon insertion was isolated which introduces a defect in social gliding and is genetically linked to a known sgl locus; this insertion was found also to cause a piliation defect. A 2.7 kb section of DNA was isolated from either side of this transposon and sequenced, revealing three genes which encode amino acid sequences with substantial similarity to components of the Type IV pilus biogenesis pathway in Pseudomonas aeruginosa . The myxococcal pilA gene encodes a putative pilin precursor with a short signal sequence and processing site similar to those of other Type IV pilins. Myxococcal pilS and pilR encode amino acid sequences with similarity to PilS and PilR of P. aeruginosa , as well as to other members of the NtrB/C family of two-component regulators. Mutations within pilR and pilA that have no polar effect were demonstrated to be responsible for pilus and social motility defects. These results indicate that the pili of M. xanthus belong to the Type IV family of pili, and demonstrate that these pili are actually required for social motility.     

Characterization of type IV pilus genes in plant growth-promoting Pseudomonas putida WCS358.

In a search for factors that could contribute to the ability of the plant growth-stimulating Pseudomonas putida WCS358 to colonize plant roots, the organism was analyzed for the presence of genes required for pilus biosynthesis. The pilD gene of Pseudomonas aeruginosa, which has also been designated xcpA, is involved in protein secretion and in the biogenesis of type IV pili. It encodes a peptidase that processes the precursors of the pilin subunits and of several components of the secretion apparatus. Prepilin processing activity could be demonstrated in P. putida WCS358, suggesting that this nonpathogenic strain may contain type IV pili as well. A DNA fragment containing the pilD (xcpA) gene of P. putida was cloned and found to complement a pilD (xcpA) mutation in P. aeruginosa. Nucleotide sequencing revealed, next to the pilD (xcpA) gene, the presence of two additional genes, pilA and pilC, that are highly homologous to genes involved in the biogenesis of type IV pili. The pilA gene encodes the pilin subunit, and pilC is an accessory gene, required for the assembly of the subunits into pili. In comparison with the pil gene cluster in P. aeruginosa, a gene homologous to pilB is lacking in the P. putida gene cluster. Pili were not detected on the cell surface of P. putida itself, not even when pilA was expressed from the tac promoter on a plasmid, indicating that not all the genes required for pilus biogenesis were expressed under the conditions tested. Expression of pilA of P. putida in P. aeruginosa resulted in the production of pili containing P. putida PilA subunits.     

Mapping the surface regions of Pseudomonas aeruginosa PAK pilin: the importance of the C-terminal region for adherence to human buccal epithelial cells

The adherence of non-mucoid Pseudomonas aeruginosa strains is believed to be mediated by the pilus, which consists of a single protein subunit of 15,000 Daltons called pilin. Ten antipeptide antisera were raised to map the surface regions of pilin from P. aeruginosa strain K (PAK). Only one of the antipeptide antisera to the eight predicted surface regions failed to react with PAK pili in direct ELISA. Five out of eight synthetic peptides representing the eight predicted surface regions reacted with anti-PAK pilus antiserum, indicating their surface exposure. Combining the antipeptide and antipilus antisera results, all eight predicted surface regions were demonstrated to be surface-exposed. The PAK 128-144-OH peptide produced the best binding antiserum to PAK pili. Only antipeptide Fab fragments directed against the disulphide bridged C-terminal region of PAK pilin blocked the adherence of pili to human buccal epithelial cells, which suggests that this region contains the receptor-binding domain of the PAK pilus.     

Structural and Functional Studies of the Pseudomonas aeruginosa Minor Pilin,PilE

Many bacterial pathogens, including Pseudomonas aeruginosa, use type IVa pili (T4aP) for attachment and twitching motility. T4aP are composed primarily of major pilin subunits, which are repeatedly assembled and disassembled to mediate function. A group of pilin-like proteins, the minor pilins FimU and PilVWXE, prime pilus assembly and are incorporated into the pilus. We showed previously that minor pilin PilE depends on the putative priming subcomplex PilVWX and the non-pilin protein PilY1 for incorporation into pili, and that with FimU, PilE may couple the priming subcomplex to the major pilin PilA, allowing for efficient pilus assembly. Here we provide further support for this model, showing interaction of PilE with other minor pilins and the major pilin. A 1.25 Å crystal structure of PilE_Δ1–28 shows a typical type IV pilin fold, demonstrating how it may be incorporated into the pilus. Despite limited sequence identity, PilE is structurally similar to Neisseria meningitidis minor pilins PilX_Nm and PilV_Nm, recently suggested via characterization of mCherry fusions to modulate pilus assembly from within the periplasm. A P. aeruginosa PilE-mCherry fusion failed to complement twitching motility or piliation of a pilE mutant. However, in a retraction-deficient strain where surface piliation depends solely on PilE, the fusion construct restored some surface piliation. PilE-mCherry was present in sheared surface fractions, suggesting that it was incorporated into pili. Together, these data provide evidence that PilE, the sole P. aeruginosa equivalent of PilX_Nm and PilV_Nm, likely connects a priming subcomplex to the major pilin, promoting efficient assembly of T4aP.     

Cleavage, methylation, and localization of the Pseudomonas aeruginosa export proteins XcpT, -U, -V, and -W.

Four components of the apparatus of extracellular protein secretion of Pseudomonas aeruginosa, Xcpt, -U, -V, and -W (XcpT-W), are synthesized as precursors with short N-terminal leader peptides that share sequence similarity with the pilin subunit of this organism. A specialized leader peptidase/methylase, product of the pilD gene, has been shown to cleave the leader peptide from prepilin and to methylate the N-terminal phenylalanine of the mature pilin. Antibodies were prepared against XcpT-W and used to purify each of these proteins. Sequence analysis of XcpT-W has shown that these proteins, like mature pilin, contain N-methylphenylalanine as the N-terminal amino acid. Analysis of cellular fractions from wild-type and pilD mutant strains of P. aeruginosa showed that the precursor forms of XcpT-W are located predominantly in the bacterial inner membrane, and their localization is not altered after PilD-mediated removal of the leader sequence. These studies demonstrate that the biogenesis of the apparatus of extracellular protein secretion and that of type IV pili share a requirement for PilD. This bifunctional enzyme, acting in the inner membrane, cleaves the leader peptides from precursors of pilins and XcpT-W and subsequently methylates the amino group of the N-terminal phenylalanine of each of its substrates.     

The Pseudomonas aeruginosa type IV pilin receptor binding domain functions as an adhesin for both biotic and abiotic surfaces

Pseudomonas aeruginosa readily binds to stainless steel and other abiotic surfaces, causing major problems in both the medical and food industries. In this study, we show that P. aeruginosa binds to abiotic surfaces in a concentration-dependent, saturable manner during the initial stages of biofilm formation. P. aeruginosa type IV pili mediate binding to stainless steel as a pilus-deficient strain does not bind to steel, purified type IV pili bound in a concentration-dependent, saturable manner, and purified pili competitively inhibited whole cell binding. PAK pili can also bind polystyrene and polyvinylchloride in a concentration-dependant and saturable manner. As an antibody specific for the C-terminal pilin receptor binding domain inhibited adherence to abiotic surfaces, the role of the C-terminal receptor binding domain in mediating binding to steel surfaces was examined. A synthetic peptide of the PAK pilin epithelial cell receptor binding domain [PAK(128-144)ox] bound directly to steel with high affinity. The interaction of pili with steel was specifically inhibited by this peptide with an apparent Ki of approximately 0.2 nM and effectively inhibited the binding of viable homologous and heterologous P. aeruginosa strains to steel with an apparent Ki of approximately 4 nM. A single point mutation (K130I) in the PAO receptor binding domain was observed to abolish binding to stainless steel while binding to human buccal epithelial cells was enhanced. Therefore, the C-terminal receptor binding domain appears to have evolved for binding a variety of surfaces.