The expression of Pseudomonas aeruginosa PAK pilin gene mutants in Escherichia coli

Previous work has demonstrated the expression of the cloned pilin gene of Pseudomonas aeruginosa PAK within Escherichia coli and has pinpointed this protein's localization exclusively to the cytoplasmic membrane (Finlay et al., 1986). To define regions of the pilin subunit necessary for its stability and transport within E. coli, we constructed six mutants of the pilin gene and studied their expression and localization using a T7 promoter system. Two of the mutants have either a 4- or 8-amino-acid deletion at the N-terminus and both were stably expressed and transported primarily to the cytoplasmic membrane of E. coli. The other four mutants are C-terminal truncations having between 36 and 56 amino acids of the N-terminal region of the unprocessed pilin. Studies with these truncated mutants revealed that only the first 36 residues of the unprocessed pilin subunit were required for insertion into the E. coli membrane.     

Cloning and expression of the pilin gene of Pseudomonas aeruginosa PAK in Escherichia coli.

Many strains of Pseudomonas aeruginosa possess pili which have been implicated in the pathogenesis of the organism. This report presents the cloning and expression in Escherichia coli of the gene encoding the structural subunit of the pili of P. aeruginosa PAK. Total DNA from this strain was partially digested with Sau3A and inserted into the cloning vector pUC18. Recombinant E. coli clones were screened with oligonucleotide probes prepared from the constant region of the previously published amino acid sequence of the mature pilin subunit. Several positive clones were identified, and restriction maps were generated. Each clone contained an identical 1.1-kilobase HindIII fragment which hybridized to the oligonucleotide probes. Western blot analysis showed that all of the clones expressed small amounts of the P. aeruginosa pilin subunit, which has a molecular mass of ca. 18,000. This expression occurred independently of the orientation of the inserted DNA fragments in the cloning vector, indicating that synthesis was directed from an internal promoter. However, subclones containing the 1.1-kilobase HindIII fragment in a specific orientation produced an order of magnitude more of the pilin subunit. While the expressed pilin antigen was located in both the cytoplasmic and outer membrane fractions of E. coli, none appeared to be polymerized into a pilus structure.     

Pseudomonas aeruginosa Type IV pilus expression in Neisseria gonorrhoeae: effects of pilin subunit composition on function and organelle dynamics

Type IV pili (TFP) play central roles in the expression of many phenotypes including motility, multicellular behavior, sensitivity to bacteriophages, natural genetic transformation, and adherence. In Neisseria gonorrhoeae, these properties require ancillary proteins that act in conjunction with TFP expression and influence organelle dynamics. Here, the intrinsic contributions of the pilin protein itself to TFP dynamics and associated phenotypes were examined by expressing the Pseudomonas aeruginosa PilA(PAK) pilin subunit in N. gonorrhoeae. We show here that, although PilA(PAK) pilin can be readily assembled into TFP in this background, steady-state levels of purifiable fibers are dramatically reduced relative those of endogenous pili. This defect is due to aberrant TFP dynamics as it is suppressed in the absence of the PilT pilus retraction ATPase. Functionally, PilA(PAK) pilin complements gonococcal adherence for human epithelial cells but only in a pilT background, and this property remains dependent on the coexpression of both the PilC adhesin and the PilV pilin-like protein. Since P. aeruginosa pilin only moderately supports neisserial sequence-specific transformation despite its assembly proficiency, these results together suggest that PilA(PAK) pilin functions suboptimally in this environment. This appears to be due to diminished compatibility with resident proteins essential for TFP function and dynamics. Despite this, PilA(PAK) pili support retractile force generation in this background equivalent to that reported for endogenous pili. Furthermore, PilA(PAK) pili are both necessary and sufficient for bacteriophage PO4 binding, although the strain remains phage resistant. Together, these findings have significant implications for TFP biology in both N. gonorrhoeae and P. aeruginosa.     

Comparative studies of the amino acid and nucleotide sequences of pilin derived from Pseudomonas aeruginosa PAK and PAO.

The entire amino acid sequence for Pseudomonas aeruginosa PAO pilin was determined through peptide sequencing and from the complete nucleotide sequence encoding the pilin gene. The precursor PAO pilin is 149 amino acids in length which includes a 6-amino-acid positively charged leader sequence. Comparison of the amino acid sequences of pilin produced by P. aeruginosa PAO and PAK reveals a region of high homology corresponding to the leader peptide and residues 1 to 54 of the mature pilin. The amino acid sequence of the peptide encompassing the major antigenic determinant of PAK differs greatly from that of the equivalent region in PAO. The C-terminal regions of these proteins are semiconserved. Few major differences were found when the predicted secondary structures for PAO and PAK pilins were compared. Major nucleotide sequence variation between the equivalent restriction fragments from PAO and PAK occurred within the areas coding for the peptides containing the immunodominant site for PAK pilin and the C termini.     

Nucleotide sequence of the gene encoding the two-subunit pilin of Bacteroides nodosus 265.

The nucleotide sequence of the gene encoding pilin from Bacteroides nodosus 265 has been determined. The pilin is encoded by a single-copy gene, from which can be predicted a prepilin comprising a single protein chain of Mr 16,637. The prepilin sequence differs in several respects from the mature protein sequence. Seven additional N-terminal amino acid residues are present in prepilin, whereas residue 8, phenylalanine, undergoes posttranslational modification to become the N-methylated amino-terminal residue of mature pilin. In addition, further processing occurs through internal cleavage to produce two noncovalently linked subunits characteristic of pilins from serogroup H of B. nodosus, of which strain 265 is a member. The position of cleavage has been identified between alanine residues at positions 72 and 73 of the mature 149-residue pilin protein. The predicted pilin sequence of B. nodosus 265 shows extensive N-terminal amino acid sequence homology with other pilins of the N-methylphenylalanine type. In addition this sequence also shows homology with these N-methylphenylalanine-type pilins in the C-terminal region of the molecule, especially with pilin from Pseudomonas aeruginosa PAK.     

Mapping the surface regions of Pseudomonas aeruginosa PAK pilin: the importance of the C-terminal region for adherence to human buccal epithelial cells

The adherence of non-mucoid Pseudomonas aeruginosa strains is believed to be mediated by the pilus, which consists of a single protein subunit of 15,000 Daltons called pilin. Ten antipeptide antisera were raised to map the surface regions of pilin from P. aeruginosa strain K (PAK). Only one of the antipeptide antisera to the eight predicted surface regions failed to react with PAK pili in direct ELISA. Five out of eight synthetic peptides representing the eight predicted surface regions reacted with anti-PAK pilus antiserum, indicating their surface exposure. Combining the antipeptide and antipilus antisera results, all eight predicted surface regions were demonstrated to be surface-exposed. The PAK 128-144-OH peptide produced the best binding antiserum to PAK pili. Only antipeptide Fab fragments directed against the disulphide bridged C-terminal region of PAK pilin blocked the adherence of pili to human buccal epithelial cells, which suggests that this region contains the receptor-binding domain of the PAK pilus.     

Assembly of mutant pilins in Pseudomonas aeruginosa: formation of pili composed of heterologous subunits.

Recently, we reported the degree of N-terminal processing within the cytoplasmic membranes of three mutant pilins from Pseudomonas aeruginosa PAK with respect to leader peptide removal and the methylation of the N-terminal phenylalanine (B. L. Pasloske and W. Paranchych, Mol. Microbiol. 2:489-495, 1988). The results of those experiments showed that the deletion of 4 or 8 amino acids within the highly conserved N terminus greatly inhibited leader peptide removal. On the other hand, the mutation of the glutamate at position 5 to a lysine permitted leader peptide cleavage but inhibited transmethylase activity. In this report, we have examined the effects of these mutant pilins upon pilus assembly in a P. aeruginosa PAO host with or without the chromosomally encoded pilin gene present. Pilins with deletions of 4 or 8 amino acids in the N-terminal region were not incorporated into pili. Interestingly, pilin subunits containing the glutamate-to-lysine mutation were incorporated into compound pili together with PAO wild-type subunits. However, the mutant pilins were unable to polymerize as a homopolymer. When wild-type PAK and PAO pilin subunits were expressed in the same bacterial strain, the pilin subunits assembled into homopolymeric pili containing one or the other type of subunit.     

Use of synthetic peptides to confirm that the Pseudomonas aeruginosa PAK pilus adhesin and the Candida albicans fimbrial adhesin possess a homologous receptor-binding domain

Pseudomonas aeruginosa PAK pili and Candida albicans fimbriae are adhesins present on the microbial cell surfaces which mediate binding to epithelial cell-surface receptors. The receptor-binding domain (adhesintope) of the PAK pilus adhesin has been shown previously to reside in the carboxy-terminal disulphide-bonded region of P. aeruginosa pilin (PAK128-144). The delineation of the C. albicans fimbrial adhesintope was investigated in these studies using synthetic peptides which correspond to the whole (PAK128-144) or part of (PAK134-140) adhesintope of the PAK pilus and their respective anti-peptide antisera and biotinylated PAK pili (Bt-PAK pili), fimbriae (Bt-fimbriae), P. aeruginosa whole cells (Bt- P. aeruginosa ) and C. albicans whole cells (Bt- C. albicans ). The results from these studies confirmed that a structurally conserved motif akin to the PAK(128-144) peptide sequence is present in C. albicans fimbrial adhesin and that the seven-amino-acid residue PAK(134-140) sequence plays an important role in forming the adhesintope for both P. aeruginosa PAK pilus and C. albicans fimbrial adhesins.     

Interaction of a peptide from the receptor-binding domain of Pseudomonas aeruginosa pili strain PAK with a cross-reactive antibody: changes in backbone dynamics induced by binding

The C-terminal receptor-binding region of Pseudomonas aeruginosa pilin protein strain PAK (residues 128-144) has been the target for the design of a vaccine effective against P. aeruginosa infections. We have recently cloned and expressed a (15)N-labeled PAK pilin peptide spanning residues 128-144 of the PAK pilin protein. The peptide exists as a major (trans) and minor (cis) species in solution, arising from isomerization around a central Ile(138)-Pro(139) peptide bond. The trans isomer adopts two well-defined turns in solution, a type I beta-turn spanning Asp(134)-Glu-Gln-Phe(137) and a type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142). The cis isomer adopts only one well-defined type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142) but displays evidence of a less ordered turn spanning Asp(132)-Gln-Asp-Glu(135). These turns have been implicated in cross-reactive antibody recognition. (15)N NMR relaxation experiments of the (15)N-labeled recombinant PAK pilin peptide in complex with an Fab fragment of a cross-reactive monoclonal antibody, PAK-13, raised against the intact PAK pilus, were performed in order to probe for changes in the mobilities and dynamics of the peptide backbone as a result of antibody binding. The major results of these studies are as follows: binding of Fab leads to the preferential ordering of the first turn over the second turn in each isomer, binding of Fab partially stabilizes peptide backbone regions undergoing slow (microsecond to millisecond) exchange-related motions, and binding of Fab leads to a greater loss in backbone conformational entropy at pH 7.2 versus pH 4.5. The biological implications of these results will be discussed in relation to the role that fast and slow backbone motions play in PAK pilin peptide immunogenicity and within the framework of developing a pilin peptide vaccine capable of conferring broad immunity across P. aeruginosa strains.     

Cloning and sequencing of the Pseudomonas aeruginosa PAK pilin gene

A 1.2-kilobase (kb) HindIII restriction fragment containing the pilin gene from Pseudomonas aeruginosa PAK has been cloned and sequenced. The pilin protein is 144 amino acids in length with a positively charged leader sequence of 6 amino acids. There is probably only one copy of the gene per chromosome.     

Products of three accessory genes, pilB, pilC, and pilD, are required for biogenesis of Pseudomonas aeruginosa pili.

The polar pili of Pseudomonas aeruginosa are composed of monomers of the pilin structural subunits. The biogenesis of pili involves the synthesis of pilin precursor, cleavage of a six-amino-acid leader peptide, membrane translocation, and assembly of monomers into a filamentous structure extending from the bacterial surface. This report describes three novel genes necessary for the formation of pili. DNA sequences adjacent to pilA, the pilin structural gene, were cloned and mutagenized with transposon Tn5. Each of the insertions were introduced into the chromosome of P. aeruginosa PAK by gene replacement. The effect of the Tn5 insertions in the bacterial chromosome on pilus assembly was assessed by electron microscopy and sensitivity of mutants to a pilus-specific bacteriophage. The resultant mutants were also tested for synthesis and membrane localization of the pilin antigen in order to define the genes required for maturation, export, and assembly of pilin. A 4.0-kilobase-pair region of DNA adjacent to the pilin structural gene was found to be essential for formation of pili. This region was sequenced and found to contain three open reading frames coding for 62-, 38- to 45-, and 28- to 32-kilodalton proteins (pilB, pilC, and pilD, respectively). Three proteins of similar molecular weight were expressed in Escherichia coli from the 4.0-kilobase-pair fragment flanking pilA with use of a T7 promoter-polymerase expression system. The results of the analyses of the three genes and the implications for pilin assembly and maturation are discussed.     

Interaction of a bacterially expressed peptide from the receptor binding domain of Pseudomonas aeruginosa pili strain PAK with a cross-reactive antibody: conformation of the bound peptide

The C-terminal receptor binding region of Pseudomonas aeruginosa pilin protein strain PAK (residues 128-144) has been the target for the design of a vaccine effective against P. aeruginosa infections. We have recently cloned and expressed a (15)N-labeled PAK pilin peptide spanning residues 128-144 of the PAK pilin protein. The peptide exists as a major (trans) and minor (cis) species in solution, arising from isomerization around a central Ile(138)-Pro(139) peptide bond. The trans isomer adopts two well-defined turns in solution, a type I beta-turn spanning Asp(134)-Glu-Gln-Phe(137) and a type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142). The cis isomer adopts only one well-defined type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142) but displays evidence of a less ordered turn spanning Asp(132)-Gln-Asp-Glu(135). These turns have been implicated in cross-reactive antibody recognition. (15)N-edited NMR spectroscopy was used to study the binding of the (15)N-labeled PAK pilin peptide to an Fab fragment of a cross-reactive monoclonal antibody, PAK-13, raised against the intact PAK pilus. The results of these studies are as follows: the trans and cis isomers bind with similar affinity to the Fab, despite their different topologies; both isomers maintain the conformational integrity of their beta-turns when bound; binding leads to the preferential stabilization of the first turn over the second turn in each isomer; and binding leads to the perturbation of resonances within regions of the trans and cis backbone that undergo microsecond to millisecond motions. These slow motions may play a role in induced fit binding of the first turn to Fab PAK-13, which would allow the same antibody combining site to accommodate either trans or cis topology. More importantly for vaccine design, these motions may also play a role in the development of a broad-spectrum vaccine capable of generating an antibody therapeutic effective against the multiple strains of P. aeruginosa.     

Biochemical studies on pili isolated from Pseudomonas aeruginosa strain PAO.

Pseudomonas aeruginosa strains PAO and PAK bear polar pili which are flexible filaments having a diameter of 6 nm and an average length of 2500 nm. Both types of pili are retractile and promote infection by a number of bacteriophages. The present communication describes the partial biochemical characterization of PAO pili isolated from a multipiliated nonretractile mutant of PAO. The observed properties are compared to those of PAK pili which were characterized previously. PAO pili were found to contain a single polypeptide subunit of 18 700 daltons. This is similar to PAK pili which contain a single polypeptide of 18 100 daltons. The amino acid composition of PAO pilin was also similar to that of PAK pilin. Neither protein contained phosphate or carbohydrate residues and both were found to contain N-methylphenylalanine at the amino terminus. Sequencing of 20 amino acid residues at the amino terminal end of PAO pilin revealed the sequence to be identical with that of PAK pilin, while tryptic peptide analyses of PAO and PAK pilin indicated that the two proteins probably contain a number of homologous regions within the polypeptide. It was concluded that PAO and PAK pili were closely related structures.     

PilO of Pseudomonas aeruginosa 1244: subcellular location and domain assignment

PilO of Pseudomonas aeruginosa 1244 catalyses the attachment of an O-antigen repeating unit to the beta-carbon of the pilin C-terminal residue, a serine. The present study was conducted to locate the regions of this enzyme important in catalysis and to establish the cellular location of the pilin glycosylation reaction. While PilO was not detectable in extracts of P. aeruginosa or Escherichia coli, even under conditions of overexpression, it was found that an intact MalE-PilO fusion protein was produced in significant amounts. This fusion complemented a P. aeruginosa 1244 mutant containing a pilO deletion and targeted to the cytoplasmic membrane of E. coli. Wzy and WaaL, enzymes that also utilize the O-antigen repeating unit as substrate, were found to share a sequence pattern with PilO even though these proteins have little overall sequence similarity. PilO constructs in which portions of this common sequence were deleted or altered by site-directed mutagenesis lacked pilin glycosylating activity. Deletions of segments downstream from the common region also prevented enzyme activity. Topology studies showed that the two PilO regions associated with enzyme activity were located in the periplasm. These results establish regions of this enzyme important for catalysis and present evidence that pilin glycosylation occurs in the periplasmic space of this organism.