Intense green‐, red‐emitting Tb3+, Tb3+/Bi3+‐doped and Sm3+, Sm3+/La3+‐doped Ca2Al2SiO7 phosphors

This paper focuses on an optical study of a Tb³⁺/Bi³⁺‐doped and Sm³⁺/La³⁺‐ doped Ca₂Al₂SiO₇ phosphor synthesized using combustion methods. Here, Ca₂Al₂SiO₇:Sm³⁺ showed a red emission band under visible light excitation but, when it co‐doped with La³⁺ ions, the emission intensity was further enhanced. Ca₂Al₂SiO₇:Tb³⁺ shows the characteristic green emission band under near‐ultraviolet light excitation wavelengths, co‐doping with Bi³⁺ ions produced enhanced photoluminescence intensity with better colour tunable properties. The phosphor exhibited better phase purity and crystallinity, confirmed by X‐ray diffraction. Binding energies of Ca(2p), Al(2p), Si(2p), O(1s) were studied using X‐ray photoelectron spectroscopy. The reported phosphor may be a promising visible light excited red phosphor for light‐emitting diodes and energy conversion devices.     

Photoluminescence properties of a new orange–red‐emitting Sm3+–La3SbO7 phosphor

The antimonate compound La₃SbO₇ has high chemical stability, lattice stiffness and thermal stability. Orange–red‐emitting antimonate‐based phosphors La₃SbO₇:xSm³⁺ (x = 0.02, 0.05, 0.08, 0.10, 0.15, 0.20 and 0.25) were synthesized. The phase structure and photoluminescence properties of these phosphors were investigated. The emission spectrum obtained on excitation at 407 nm contained exclusively the characteristic emissions of Sm³⁺ at 568, 608, 654 and 716 nm, which correspond to the transitions from ⁴G_5/2 to ⁶H_5/2, ⁶H_7/2, ⁶H_9/2 and ⁶H_11/2 of Sm³⁺, respectively. The strongest emission was located at 608 nm due to the ⁴G_5/2→⁶H_7/2 transition of Sm³⁺, generating bright orange–red light. The critical quenching concentration of Sm³⁺ in La₃SbO₇:Sm³⁺ phosphor was determined as 10% and the energy transfer between Sm³⁺ was found to be through an exchange interaction. The International Commission on Illumination chromaticity coordinates of the La₃SbO₇:0.10Sm³⁺ phosphors are located in the orange–red region. The La₃SbO₇:Sm³⁺ phosphors may be potentially used as red phosphors for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence characteristics of Sm3+‐doped Bi4Si3O12 red‐emitting phosphor

A series of novel red‐emitting Sm³⁺‐doped bismuth silicate phosphors, Bi₄Si₃O₁₂:xSm³⁺ (0.01 ≤ x ≤ 0.06), were prepared via the sol–gel route. The phase of the synthesized samples calcinated at 800 °C is isostructural with Bi₄Si₃O₁₂ according to X‐ray diffraction results. Under excitation with 405 nm light, some typical peaks of Sm³⁺ ions centered at 566, 609, 655 and 715 nm are found in the emission spectra of the Sm³⁺‐doped Bi₄Si₃O₁₂ phosphors. The strongest peak located at 609 nm is due to ⁴G_5/2–⁶H_7/2 transition of Sm³⁺. The luminescence intensity reaches its maximum value when the Sm³⁺ ion content is 4 mol%. The results suggest that Bi₄Si₃O₁₂:Sm³⁺ may be a potential red phosphor for white light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Multi-color luminescence of Sm3+-doped Na2YMg2V3O12 phosphor potentially applicable in white-LEDs

A novel multi-color emitting Na₂YMg₂V₃O₁₂:Sm³⁺ phosphor was synthesized using a solid-state reaction, and its crystal structure, luminescence properties, and thermal stability were studied. Charge transfer within the (VO₄)³⁻ groups in the Na₂YMg₂V₃O₁₂ host led to a broad emission band between 400 and 700 nm, with a maximum at 530 nm. The Na₂Y_1−xMg₂V₃O₁₂:xSm³⁺ phosphors exhibited a multi-color emission band under 365 nm near-ultraviolet (near-UV) light, consisting of the green emission of the (VO₄)³⁻ groups and sharp emission peaks at 570 nm (yellow), 618 nm (orange), 657 nm (red), and 714 nm (deep red) of Sm³⁺ ions. The optimal doping concentration of Sm³⁺ ions was found to be 0.05 mol%, and the dipole–dipole (d–d) interaction was primarily responsible for the concentration quenching phenomenon. Using the acquired Na₂YMg₂V₃O₁₂:Sm³⁺ phosphors, commercial BaMgAl₁₀O₁₇:Eu²⁺ blue phosphor, and a near-UV light-emitting diode (LED) chip, a white-LED lamp was designed and packaged. It produced bright neutral white light, manifesting a CIE coordinate of (0.314, 0.373), a color rendering index (CRI) of 84.9, and a correlated color temperature (CCT) of 6377 K. These findings indicate the potential of Na₂YMg₂V₃O₁₂:Sm³⁺ phosphor to be used as a multi-color component for solid-state illumination.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and luminescence characterization of a new yellowish‐orange phosphor: Ba2B10O17:Sm3+

A new yellowish‐orange emitting phosphor, Ba₂B₁₀O₁₇:Sm³⁺ for use as a white light‐emitting diode (W‐LED) was synthesized by a solid‐state reaction method. The X‐ray diffraction results indicated that a pure Ba₂B₁₀O₁₇ material was obtained. As a potential yellowish‐orange luminescent material for W‐LEDs, the Ba₂B₁₀O₁₇:Sm³⁺ phosphor could be excited effectively by near‐ultraviolet (n‐UV) light and exhibited yellowish‐orange emission centered at 560 nm corresponding to the ⁴G_5/2 → ⁶H_5/2 transition of Sm³⁺ ions. The optimum concentration of Sm³⁺ ions in Ba₂B₁₀O₁₇, critical transfer distance (Ra) and concentration quenching mechanism of the presented phosphor were investigated. Moreover, CIE chromaticity coordinates and color purity performance of the Ba₂B₁₀O₁₇:Sm³⁺ phosphor were also discussed. The present work suggests that the Ba₂B₁₀O₁₇:Sm³⁺ phosphor has potential as a type of yellowish‐orange emitting phosphor. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence of Sm3+ in double perovskite-type Ba2SrWO6 for insect trapping

The predominant method for pest control has been the use of pesticides, which have been shown to have detrimental effects on soil, freshwater, and crop quality. Therefore, the development of novel and sustainable crop protection strategies has become increasingly imperative. In this study, a novel orange–red emitting Ba₂SrWO₆: Sm³⁺ phosphor was synthesized using the high-temperature solid-state reaction. Under ultraviolet excitation, the phosphors showed obvious emission peaks at 575, 614, and 662 nm. The Ba₂SrWO₆: Sm³⁺ was used to fabricate a fluorescence film with polydimethylsiloxane (PDMS), and attracted twice as many insects as the blank control group under 365 nm ultraviolet light. This material holds great potential as a fluorescent agent for insect trapping in the pest control fields of tea, cotton, eggplant, rice, potato, grape, and other agricultural industries. Our findings provide an eco-friendly approach to pest management for the increment of food production.     

Tunable photoluminescence properties of Sr1‐yCayMoO4:Sm3+ phosphors (0 ≤ y < 1)

A series of Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors was synthesized by a conventional solid‐state reaction method in air, and their structural and spectroscopic properties were investigated. The optimal doping concentration of Sm³⁺ in SrMoO₄:Sm³⁺ phosphor is 5 mol%. Under excitation with 275 nm, in Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors, the emission band of the host was found to overlap with the excitation bands peaking at ~500 nm of Sm³⁺ ion, and the energy transfer from MoO₄^2? group to Sm³⁺ ion can also be observed. The International Commission on Illumination (CIE) chromaticity coordinates of Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation 275 nm varied systematically from an orange (0.4961, 0.3761) (y = 0) to a white color (0.33, 0.3442) (y = 0.95) with increasing calcium oxide (CaO) concentration. However, Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation at 404 nm only showed red emission and the energy transfer between MoO₄^2? group to Sm³⁺ ion was not observed. The complex mechanisms of luminescence and energy transfer are discussed by energy level diagrams of MoO₄^2? group and Sm³⁺ ion. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence studies of a Li2Ca1−xSiO4:xSm3+ phosphor for the generation of white light under NUV-excited phosphor converting LEDs

In this paper, we present new aspects of Sm³⁺-doped pure Li₂CaSiO₄ as a suitable candidate for white light emitting diode (WLED) applications. The samples were mainly prepared using a conventional modified solid-state synthesis technique. The structural studies were done using X-ray diffraction and Rietveld refinement. Instruments such as a scanning electron microscope (SEM) were used to obtain information about the morphology of the as-prepared samples. Photoluminescence (PL) analysis of phosphor samples for variable concentrations of doping ions with variable excitations were presented. When doped with Sm³⁺ in host Li₂CaSiO₄ it emitted intense blue, green and red emissions and a more intense red emission peak (605 nm) under 408 nm excitation (near-UV–blue). Our study shows that the as-prepared phosphor may be useful for optical devices and mainly for WLEDs. The corresponding transitions of doping ions and concentration quenching effect were studied in detail. The 1931 Commission Internationale de l'Eclairage (x, y) chromaticity coordinates showed the distribution of spectral regions calculated from PL emission spectra and this was found (0.63, 0.36) in the red region, so the phosphor may be useful for near-UV–blue excited WLED applications.     

Synthesis and photoluminescence enhancement of the LiLa(MoO4)2:Sm3+ red phosphors by co-doping with Bi3+

The LiLa(MoO₄)₂:Sm³⁺ and LiLa(MoO₄)₂:Sm³⁺,Bi³⁺ phosphors were prepared using the citric-acid-fueled combustion method and the influence of concentrations of Bi³⁺ dopant on LiLa(MoO₄)₂:Sm³⁺ red luminescence was investigated. The LiLa(MoO₄)₂:Sm³⁺ and LiLa(MoO₄)₂:Sm³⁺,Bi³⁺ samples matched well with the scheelite structure and I4₁/a space group and did not detect structural changes. Under an excitation of 403 nm, the prepared LiLa(MoO₄)₂:Sm³⁺,Bi³⁺ phosphor was excited and produced orange-red emission. When compared with the LiLa(MoO₄)₂:Sm³⁺ phosphor, the LiLa(MoO₄)₂:Sm³⁺,Bi³⁺ phosphor exhibited enhanced fluorescence intensity because the Bi³⁺ dopant ions are doped as a sensitizer. The optimal doping concentrations of Sm³⁺ and Bi³⁺ were 5 and 1 mol%, respectively. Furthermore, the energy transfer from Bi³⁺ to Sm³⁺ is effective (³P₁ → ⁴K_11/2). Subsequently, the electrons in an unstable excited state were transferred to a stable ground state (⁴G_5/2 → ⁶H_5/2, ⁶H_7/2, ⁶H_9/2). The Commission Internationale de L'Eclairage (CIE) chromaticity coordinates of the optimized LiLa(MoO₄)₂:Sm³⁺,Bi³⁺ phosphor were situated in the orange-red region. The luminescence of the LiLa(MoO₄)₂:Sm³⁺,Bi³⁺ phosphor generated under near-ultraviolet (UV) irradiation could be used to produce a warm white light, indicating its possible applications in white light-emitting diodes.     

Photoluminescence characteristics of novel Sm3+ ions-doped La1.4Al22.6O36 phosphor for n-UV w-LED

The combustion procedure was used to synthesize La_1.4Al_22.6O₃₆:Sm³⁺ phosphors. The X-ray diffraction (XRD) patterns and morphological and photoluminescence properties were investigated. The XRD patterns consisted of a hexagonal crystal structure. At 405 nm, the maximum excitation intensity was obtained. Following 405 nm excitation, three different emission peaks at 573, 604, and 651 nm were seen. Concentration quenching occurred at 1.5 mol% Sm³⁺ ions. The Commission Internationale de l'éclairage coordinates for the La_1.4Al_22.6O₃₆ phosphor with Sm³⁺ doping were 604 nm (x = 0.644, y = 0.355) falling in the red region. The findings implied that the prepared phosphor may be used to develop w-light-emitting diodes.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence properties of red‐emission Mg4Nb2O9:Eu3+ phosphor

Red‐emitting Mg₄Nb₂O₉:Eu³⁺ phosphor is synthesized via a solid‐state reaction method in air, and its crystal structure and luminescence are investigated. The phosphor can be excited efficiently by ~ 395 nm light, coupled well with a ~ 395 nm near‐ultraviolet chip and emits red light at ~ 613 nm with sharp spectra due to ⁵D₀ → ⁷ F₂ transition of the Eu³⁺ ion. Mg₄Nb₂O₉:Eu³⁺ phosphor sintered at 1350 ºC shows Commission international de I'Eclairage (CIE) chromaticity coordinates of x = 0.6354, y = 0.3592, and is a potential red‐emitting phosphor candidate for white light‐emitting diodes (W‐LEDs) under ~ 395 nm near‐ultraviolet LED chip excitation. Copyright © 2014 John Wiley & Sons, Ltd.     

Energy transfer process in a rare earth (Ce3+, Dy3+, Sm3+)-doped nanocrystalline phosphate phosphor

This work presents the optimized luminescence spectra for the Ce³⁺,Sm³⁺-doped NaSrPO₄ phosphor that was synthesized using a wet chemical method. Ce³⁺ and Sm³⁺ are activator impurities that show spectral splitting bands that corresponds to the d–f and f–f transitions, respectively. These impurity elements shows the characteristics spectral bands when doped with the NaSrPO₄ host lattice. Spectral splitting in the Ce³⁺ excitation band was monitored in the 240–340 nm range, in which the observed bands were located at 269 nm, 292 nm and 321 nm, and emission bands were observed in the broad spectral range 330–430 nm. However, when Sm³⁺ ion was doped in the same host lattice we obtained a characteristic emission band at 590 and 645 nm in the orange–red region, under sharp excitation bands located at 345, 361, 375, and 403 nm respectively. Also, we carried out energy transfer analysis in the Ce³⁺/Dy³⁺-doped NaSrPO₄ phosphor. Further crystalline phase and the nanophase nature of the phosphor compound were confirmed using X-ray diffraction and transmission electron microscopy analyses.     

Structural,morphological, and photoluminescence properties of RE (RE = Dy3+, Eu3+, Sm3+)-doped CaAlBO4 phosphor synthesized by combustion method

The CaAlBO₄:RE (RE = Dy³⁺, Eu³⁺, Sm³⁺) phosphor were prepared via combustion synthesis and studied by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectra and CIE coordinates. The phase formation of the obtained phosphor was analyzed by XRD and the result was confirmed by standard PDF Card No. 1539083. XRD data successfully indicated pure phase of CaAlBO₄ phosphor. The crystal structure of CaAlBO₄ phosphor is orthorhombic with space group Ccc2 (37). The SEM image of CaAlBO₄ phosphor reveals an agglomerated morphology and non-uniform particle size. The EDS image provides evidence of the elements present and the chemical makeup of the materials. Under the 350 nm excitation, the emission spectrum of Dy³⁺ activated CaAlBO₄ phosphor consists of two main groups of characteristic peaks located at 484 and 577 nm which are ascribed to ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transition of Dy³⁺ respectively. The PL emission spectra of CaAlBO₄:Eu³⁺ phosphor shows characteristics bands observed around 591 and 613 nm, which corresponds to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transition of Eu³⁺ respectively, upon 395 nm excitation wavelength. The emission spectra of Sm³⁺ activated CaAlBO₄ phosphor shows three characteristic bands observed at 565, 601 and 648 nm which emits yellow, orange and red color. The prominent emission peak at the wavelength 601 nm, which is attributed to ⁴G_5/2 → ⁶H_7/2 transition, displays an orange emission. The CIE color coordinates of CaAlBO₄:RE (RE = Dy³⁺, Eu³⁺, Sm³⁺) phosphor are calculated to be (0.631, 0.368), (0.674, 0.325) and (0.073, 0.185). As per the obtained results, CaAlBO₄:RE (RE = Dy³⁺, Eu³⁺, Sm³⁺) phosphor may be applicable in eco-friendly lightning technology.     

Luminescence study of Sm3+,Eu3+-doped Y2Zr2O7 host: optical investigation of greenish yellow to red colour tunable pyrochlore phosphor

Pyrochlore phosphors have shown their worth in modern day lighting in the last few years. Colour tunability of the phosphor is one of the modern techniques used to obtain white light-emitting diodes (WLEDs). In the proposed work, Y₂Zr₂O₇:Sm³⁺,Eu³⁺ phosphors were investigated for WLED applications as well as display devices. A convectional solid-state diffusion method was used to synthesize the proposed phosphors. X-ray diffraction of the proposed phosphors was performed and compared with the standard Inorganic Crystal Structure Database. The crystal structure of the sample was cubic in nature, obtained from Rietveld refinement. Vibrational and morphological studies on the samples were carried out using Fourier transform infrared spectroscopy and scanning electron microscopy analysis. The photoluminescence study of the colour tunable phosphor showed the characteristic peak of Sm³⁺ together with the two sharp peaks of Eu³⁺ ions. Greenish yellow to red colour tunability was observed in the proposed phosphor with enhancement of Eu³⁺ ions. All these results showed the worth of this sample for WLEDs applications as well as in display devices.     

Emission analysis of Tb3+‐and Sm3+‐ion‐doped (Li2O/Na2O/K2O) and (Li2O + Na2O/Li2O + K2O/K2O + Na2O)‐modified borosilicate glasses

Four series of borosilicate glasses modified by alkali oxides and doped with Tb³⁺ and Sm³⁺ ions were prepared using the conventional melt quenching technique, with the chemical composition 74.5B₂O₃ + 10SiO₂ + 5MgO + R + 0.5(Tb₂O₃/Sm₂O₃) [where R = 10(Li₂O /Na₂O/K₂O) for series A and C, and R = 5(Li₂O + Na₂O/Li₂O + K₂O/K₂O + Na₂O) for series B and D]. The X‐ray diffraction (XRD) patterns of all the prepared glasses indicate their amorphous nature. The spectroscopic properties of the prepared glasses were studied by optical absorption analysis, photoluminescence excitation (PLE) and photoluminescence (PL) analysis. A green emission corresponding to the ⁵D₄ → ⁷F₅ (543 nm) transition of the Tb³⁺ ions was registered under excitation at 379 nm for series A and B glasses. The emission spectra of the Sm³⁺ ions with the series C and D glasses showed strong reddish‐orange emission at 600 nm (⁴G_5/2 →⁶H_7/2) with an excitation wavelength λ_exci = 404 nm (⁶H_5/2→⁴F_7/2). Furthermore, the change in the luminescence intensity with the addition of an alkali oxide and combinations of these alkali oxides to borosilicate glasses doped with Tb³⁺ and Sm³⁺ ions was studied to optimize the potential alkali‐oxide‐modified borosilicate glass.     

Emission analysis of RE3+ (RE = Sm,Dy):B2O3‐TeO2‐Li2O‐AlF3 glasses

This article reports on the optical properties of 0.5% mol of Sm³⁺, Dy³⁺ ion‐doped B₂O₃‐TeO₂‐Li₂O‐AlF₃ (LiAlFBT) glasses. The glass samples were characterized by optical absorption and emission spectra. Judd‐Ofelt theory was applied to analyze the optical absorption spectra and calculate the intensity parameters and radiative properties of the emission transitions. The emission spectra of Sm³⁺ and Dy³⁺:LiAlFBT glasses showed a bright reddish‐orange emission at 598 nm (⁴G_5/2 → ⁶H_7/2) and an intense yellow emission at 574 nm (⁴F_9/2 → ⁶H_13/2), respectively. Full width at half maximum (FWHM), stimulated emission cross section, gain bandwidth and optical gain values were also calculated to extend the applications of the Sm³⁺ and Dy³⁺:LiAlFBT glasses. Copyright © 2012 John Wiley & Sons, Ltd.     

An efficient orange–red‐emitting LiNa3P2O7:Sm3+ pyrophosphate: Structural and optical analysis for solid‐state lighting

A trivalent rare‐earth ion (Sm³⁺)‐doped LiNa₃P₂O₇ (LNPO) phosphor was synthesized using a conventional high‐temperature solid‐state reaction route. A predominant orthorhombic phase of LNPO was observed in all X‐ray diffraction patterns. The surface states of the LNPO:Sm phosphor were confirmed by X‐ray photoelectron spectroscopy. Under 401 nm excitation, the Sm‐doped LNPO phosphors showed sharp emission peaks at 563, 600 and 647 nm that are related to the f–f transition of Sm³⁺ ions. The optimum concentration of Sm³⁺ (9 mol%) produced Commission Internationale de l'Eclairage chromaticity coordinates, color rendering index and correlated color temperature of (0.564, 0.434), 42 and 1843 K, respectively.