Fast and sensitive detection of protein and DNA bands by treatment with potassium permanganate

A silver stain technique using treatment with potassium permanganate for visualisation of proteins and DNA separated by gel electrophoresis was developed and applied both to the very thin (thickness 0.1-0.2 mm) and to the usual 1-2 mm thick gels. The technique is reproducible, only stable chemicals are used and it is shortened to about 1 h even for the 1 mm gel (30 min for the 0.2 mm gel). It is applicable to gels thicker than 2 mm with somewhat longer washes. Amounts as low as 2 X 10(-10) g of protein per band have been detected. Protein bands of different colours are obtained. The technique has been used with success in continuous, discontinuous and 2D-gel systems. Bands have been detected which were not observed when the other silver staining techniques were used.     

A new silver staining apparatus and procedure for matrix-assisted laser desorption/ionization-time of flight analysis of proteins after two-dimensional electrophoresis

We report on a new silver stain especially developed for staining large gels (25 cm x 20 cm) from the Hoefer ISO-DALT system for matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis of proteins. The staining protocol can be summarized as follows: the gels are sensitised in tetrathionate/potassium acetate solution and washed several times in distilled water. After impregnation with silver nitrate, the silver is reduced in the presence of potassium carbonate, thiosulphate and formaldehyde. The staining procedure is stopped with Tris/acetate after which the gels are rinsed and stored in water before spot picking for MALDI-TOF analysis is performed. This protocol has several advantages over existing ones. The gels are stained in a new apparatus that reduces gel handling to a minimum thus also reducing the contamination with keratins to a minimum. The development times in potassium carbonate are very long (up to 40 min) thus improving batch-to-batch reproducibility. Only the surface of the proteins is stained and the silver can be oxidized, thereafter MALDI-TOF can be performed with protein loads as little as 100 micrograms per gel.     

About the mechanism of interference of silver staining with peptide mass spectrometry

The mechanism by which silver staining of proteins in polyacrylamide gels interferes with mass spectrometry of peptides produced by proteolysis has been investigated. It was demonstrated that this interference increases with time between silver staining and gel processing, although the silver image is constant. This suggested an important role of the formaldehyde used in silver staining development in this interference process. Consequently, a formaldehyde-free staining protocol has been devised, using carbohydrazide as the developing agent. This protocol showed much increased peptide coverage and retained the sensitivity of silver staining. These results were however obtained at the expense of an increased background in the stained gels and of a reduced staining homogeneity.     

A comparison of silver staining methods for detecting proteins in ultrathin polyacrylamide gels on support film after isoelectric focusing

The application of silver staining methods to the detection of proteins on ultrathin isoelectric focusing gel systems requires the optimization of many steps in the procedure in order to obtain reproducible staining of proteins with acceptable levels of background. Three different methods which have been reported for detecting proteins by silver staining in sodium dodecyl sulfate-polyacrylamide gel systems were investigated. A major problem with staining ultrathin isoelectric focusing gels was found to be surface staining that was associated with gels cast on support films. A modification of the method of Poehling and Neuhoff (H.-M. Poehling and V. Neuhoff, 1981, Electrophoresis 2, 141-147) was found to give the best results.     

A silver staining procedure for nucleic acids in polyacrylamide gels without fixation and pretreatment

Silver staining of nucleic acid has been widely used in molecular marker analysis such as simple sequence repeat (SSR), single-strand conformation polymorphism (SSCP), and amplified fragment-length polymorphism (AFLP). Many alternatives to silver staining methods have been described, but these methods are not efficient or cost-effective. Here we report a silver staining method that requires less than 10 min for one gel and can save chemicals as well. It has a detection limit of approximately 5.6 pg of DNA/mm² in nondenaturing polyacrylamide gels and 12.8 pg/mm² in denaturing polyacrylamide gels.     

A mechanically strong matrix for protein electrophoresis with enhanced silver staining properties.

Duracryl is a mechanically strong and elastic acrylamide-based matrix, useful for a wide variety of electrophoretic applications. The matrix is stable as a refrigerated solution for one year. Upon addition of appropriate catalysts, Duracryl forms a polymer-reinforced polyacrylamide gel matrix suitable for electrophoresis. The polymer-reinforced gel is superior to conventional polyacrylamide gels in terms of mechanical strength, elasticity and protein silver staining properties. Protein detection sensitivity by silver staining, as well as the linear response of silver deposition versus protein load, is equivalent to standard acrylamide/N,N'-methylene bisacrylamide gels. Additionally, the silver staining properties of the Duracryl matrix result in proteins appearing as monochromatic shades of grey instead of red, brown and yellow, as is the case of conventional polyacrylamide matrices. Monochromatic shades of grey are more suitable for image analysis and densitometry. The matrix is compatible with standard electroblotting and protein N-terminal sequencing procedures. Low acrylic acid content and conductivity allow incorporation of the matrix into isoelectric focusing gels. The matrix was found not to alter polypeptide migration relative to the standard acrylamide/N,N'-methylene bisacrylamide matrix.     

Previsible silver staining of protein in electrophoresis gels with mass spectrometry compatibility

A convenient silver staining method for protein in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels is described. The method is previsible, sensitive, and mass spectrometry (MS) compatible. Two visible counter ion dyes, ethyl violet (EV) and zincon (ZC), were used in the first staining solution with a detection limit of 2 to 8 ng/band in approximately 1 h. The dye-stained gel can be further stained by silver staining, which is based on acidic silver staining employing ZC with sodium thiosulfate as silver ion sensitizers. Especially, ZC has silver ion reducing power by cleavage of the diazo bond of the dye during silver reduction. The second silver staining can be completed in approximately 1 h with a detection limit of 0.2 ng/band.     

Optimization of PCR protocol in microsatellite analysis with silver and SYBR® stains

Here we present the optimization of PCR conditions for microsatellite analysis of coniferous trees. The use of touchdown protocol for annealing resulted in a high success rate for optimization using fewer temperature profiles. The use of SYBR^￠ Green gel stain to detect PCR products in agarose gels was more sensitive than ethidium bromide. This is valuable for determining the success of PCR reactions and estimating the amount of PCR products formed—which is crucial in determining the dilution required to produce bands of similar intensity upon silver staining of the polyacrylamide gels. The use of SYBR^￠ Gold for staining polyacrylamide gels was not satisfactory in terms of the image quality produced. However, it was comparable to silver staining in terms of sensitivity, and could possibly be used in cases where the products are present as sharp single bands. In those cases, the use of SYBR^￠ Gold gel stain would save time and money for staining polyacrylamide gels.     

A blue dive: from ‘blue fingers’ to ‘blue silver’. A comparative overview of staining methods for in-gel proteomics

Gel-based proteomics are the most useful method for protein separation, even when compared with gel-free proteomics. Proteomic analysis by 2D gel electrophoresis (2-DE) with immobilized pH gradients is in turn the best approach to large-scale protein-expression screening. Spots visualization is pivotal for protein identification by mass spectrometry. Commonly used staining methods with excellent mass spectrometry compatibility are coomassie brilliant blue (CBB) or fluorescent dyes. In this study, an implementation of ‘blue silver’ colloidal CBB staining, characterized by high sensitivity and immediate low background, is discussed. The sensitivity of classical, colloidal and ‘blue silver’ CBB staining methods was compared on monodimensional and 2-DE gels. The implementation of the ‘blue silver’ method performs better, provided the physical state of the micelles is respected. An example of a 2-DE of human urine treated with combinatorial peptide ligand libraries demonstrates that implemented ‘blue silver’ can evidence the complexity of the sample.     

Proteins C23 and B23 are the major nucleolar silver staining proteins.

To examine the silver staining proteins of Novikoff hepatoma nucleoli, the nucleolar proteins were separated on two-dimensional polyacrylamide gels with an isoelectric focusing first dimension and an acid-urea gel second dimension. The nucleoli were sequentially extracted with (1) 0.6 M potassium acetate, pH 5.5 and (2) 2 M potassium acetate — 5 M urea — 10 mM Tris, pH 7.5. The silver staining method used for the detection of silver binding proteins in gels was similar to that used to stain the nucleolar granules on microscope slides. Two major silver staining proteins were found which were identified as (molecular weight × 10^?3/pI) proteins C23 (100/5.3) and B23 (37/5.1). These two proteins are the major acidic proteins in Novikoff hepatoma nucleoli.     

Enhanced thiosulfate-silver staining of proteins in gels using Coomassie Blue and chromium

Potassium chromium sulfate, a new sensitivity enhancer for silver staining of proteins in gels, enhanced the sensitivity of the thiosulfate-silver staining method. The sensitivity could be further improved when potassium chromium sulfate was used in association with another sensitivity enhancer, Coomassie Brilliant Blue R-250 (CBB R-250). The sensitivity of the CBB-chromium modified method to strongly basic proteins such as ribosomal proteins was about 20-fold over that of the published method. This novel method has direct applicability for 2-D gel electrophoresis used in proteomics.     

Simple, sensitive, and quick protocol to detect less than 1 ng of bacterial lipopolysaccharide

Detection and quantitation of lipopolysaccharide (LPS) are important for quality assurance of pharmaceutical, biopharmaceutical products and for several research and industrial aspects. The widely available assays for LPS detection are the normal, or chromogenic, and the synthetic LAL (Limulus amebocyte lysate). Unfortunately, both assays are expensive and could not distinguish between different types of bacterial LPS, while LPS silver nitrate staining requires more than 20 hr and can only detect 5 ng LPS. The current modified protocol was able to detect less than 0.5 ng LPS in a polyacrylamide-urea gel. The procedure is rapid, inexpensive, and reproducible. It depends on introducing two modifications to improve the staining sensitivity in sample buffer and staining procedure. The results revealed that excluding the reducing agent sucrose to use instead glycerol, and replacing SDS with DOC, as well as incorporation of 4 M urea in stacking and separating gels, increased the sensitivity up to 150 pg. In summary, the gels were fixed, carbohydrates moieties were oxidized to create active aldehydes, and the gels were silver stained using non-ammoniacal silver nitrate.     

A highly sensitive technique for staining DNA and RNA in polyacrylamide gels using silver

A technique is described for staining DNA in polyacrylamide gels with silver. It is rapid, requiring about 30 min for whole staining and development procedure, very simple and at least 20 times more sensitive than ethidium bromide for the staining of double-stranded DNA in polyacrylamide gels. This technique can also be applied for the staining of denatured, single-stranded DNA as well as RNA after their electrophoretic separation on polyacrylamide gels, having the same sensitivity as for double-stranded DNA fragments.     

Evaluation of two-dimensional difference gel electrophoresis for protein profiling. Soluble proteins of the marine bacterium Pirellula sp. strain 1

Two-dimensional gel electrophoresis (2DE) is a central tool of proteome research, since it allows separation of complex protein mixtures at highest resolution. Quantification of gene expression at the protein level requires sensitive visualization of protein spots over a wide linear range. Two-dimensional difference gel electrophoresis (2D DIGE) is a new fluorescent technique for protein labeling in 2DE gels. Proteins are labeled prior to electrophoresis with fluorescent CyDyes trade mark and differently labeled samples are then co-separated on the same 2DE gel. We evaluated 2D DIGE for detection and quantification of proteins specific for glucose or N-acetylglucosamine metabolism in the marine bacterium Pirellula sp. strain 1. The experiment was based on 10 parallel 2DE gels. Detection and comparison of the protein spots were performed with the DeCyder trade mark software that uses an internal standard to quantify differences in protein abundance with high statistical confidence; 24 proteins differing in abundance by a factor of at least 1.5 (t test value <10(-9)) were identified. For comparison, another experiment was carried out with four SYPRO-Ruby-stained 2DE gels for each of the two growth conditions; image analysis was done with the ImageMaster trade mark 2D Elite software. Sensitivity of the CyDye fluors was evaluated by comparing Cy2, Cy3, Cy5, SYPRO Ruby, silver, and colloidal Coomassie staining. Three replicate gels, each loaded with 50 microg of protein, were run for each stain and the gels were analyzed with the ImageMaster software. Labeling with CyDyes allowed detection of almost as many protein spots as staining with silver or SYPRO Ruby.     

A novel [Ag(NH3)2]+ probe for chemiluminescent imaging detection of proteins after polyacrylamide gel electrophoresis

The development of a novel [Ag(NH3)2]+ probe chemiluminescence (CL)-based imaging method for the detection of various proteins after PAGE is described. The detection is based upon the probe [Ag(NH3)2]+ catalyzing the CL reaction of the luminol-potassium persulfate system. The proposed method detects various proteins labeled by [Ag(NH3)2]+ and expands the application scope to SDS gels. It also detects proteins directly in polyacrylamide gels, without tedious transferring procedures. Furthermore, successful identification of proteins by peptide mass profiling using ionization MS was easily performed, and no pretreatments of gel prior to digestion are needed. Detection limits for standard marker proteins match CBB-R250 staining and the linear dynamic range is superior to CBB-R250 staining and silver staining. The CL imaging conditions, including luminescent reagents, silver ion concentration, the ammonia-controlled system and the washing reagents parameters have also been optimized.     

A general method for the detection and mapping of submicrogram quantities of glycosaminoglycan oligosaccharides on polyacrylamide gels by sequential staining with azure A and ammoniacal silver.

A sensitive method has been developed for the visualization of nonradiolabeled glycosaminoglycan oligosaccharides resolved by polyacrylamide gel electrophoresis using fixation with azure A followed by staining with ammoniacal silver. This method, which can detect as little as 1-2 ng of a single oligosaccharide species, can be used to stain a few micrograms of a complex oligosaccharide mixture. The combination of gradient polyacrylamide gel electrophoresis and sequential azure A/silver staining can be applied to the analysis of all the complex glycosaminoglycans (i.e., heparin, heparan sulfate, chondroitin/dermatan sulfate, keratan sulfate) and hyaluronate, as well as to comparisons of specificities of the glycosaminoglycan-degrading enzymes. This procedure may be particularly valuable in situations where the availability of glycosaminoglycan is very limited and/or where radiolabeling is impractical or undesirable.     

Dodecyl maltoside-sodium dodecyl sulfate two-dimensional polyacrylamide gel electrophoresis of chloroplast thylakoid membrane proteins

A two-dimensional electrophoretic system has been developed for the separation of chloroplast thylakoid membrane proteins. This system incorporates nondenaturing polyacrylamide gel electrophoresis in the presence of the nonionic detergent dodecyl-beta-D-maltoside in the first dimension and sodium dodecyl sulfate-polyacrylamide gel electrophoresis in the second dimension. Thylakoid membranes isolated from Spinacia oleracea were solubilized in 1.0% dodecyl-beta-D-maltoside and separated in 4-7% linear acrylamide gradient tube gels which contained 0.05% dodecyl-beta-D-maltoside. After electrophoresis, the tube gels were equilibrated with a sodium dodecyl sulfate-containing equilibration buffer and applied to a 12.5-20% acrylamide linear gradient gel. The Lammelli buffer system was used in both dimensions. The two-dimensional gels were analyzed by staining sequentially with 3,3',5,5'-tetramethylbenzidine-H2O2, Coomassie blue, and silver staining. A number of protein components were identified on "Western blots" of these two-dimensional gels by immunological localization. Membrane protein complexes such as the light-harvesting chlorophyll a/b protein complex, photosystem I, photosystem II, the cytochrome b6/f complex and ribulose bisphosphate carboxylase appear to migrate as essentially intact complexes in the first dimension and appear as vertical series of resolved subunits in the second dimension. This technique complements isoelectric focusing/sodium dodecyl sulfate-polyacrylamide gel electrophoresis in providing additional information concerning the subunit composition of membrane protein complexes and may prove to be of general utility for studying the protein composition of other membrane systems.     

Protein Components of the Purified Sodium Channel from Rat Skeletal Muscle Sarcolemma

Abstract: Sensitive detection systems have been used to study the protein components of the sodium channel purified from rat skeletal muscle sarcolemma. This functional, purified sodium channel contains at least three subunits on 7–20% gradient sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis: a large glycoprotein which migrates anomalously in the high-molecular-weight range, a 45,000 molecular weight polypeptide, and a third protein often seen as a doublet at 38,000. The large glycoprotein runs as a diffuse band and stains very poorly with Coomassie blue, but is adequately visualized with silver staining or iodination followed by autoradiography. This glycoprotein exhibits anomalous electrophoretic behavior in SDS-polyacrylamide gels. The apparent molecular weight of the center of the band varies from ～230,000 on 13% acrylamide gels to ～130,000 on 5% gels; on 7–20% gradient gels a value of 160,000 is found. Plots of relative migration versus gel concentration suggest an unusually high apparent free solution mobility. Lectin binding to purified channel peptides separated by gel electrophoresis indicates that the large glycoprotein is the only subunit that binds either concanavalin A or wheat germ agglutinin, and this component has high binding capacity for both lectins. The smaller channel components run consistently at 45,000 and 38,000 molecular weight in a variety of gel systems and do not appear to be glycosylated.     

The basis for colored silver-protein complex formation in stained polyacrylamide gels

Using a modified silver stain of Merril et al. [(1981) Science 211, 1437-1438] for staining polypeptides in sodium dodecyl sulfate-polyacrylamide gels, protein bands reproducibly stain different shades of blue, yellow, red, and gray. The procedure is highly temperature dependent, with optimal color formation at 42 degrees C. The procedure may be completed within 2 h. Color formation is due to silver ion complexes with charged amino acid side chains. The color of the silver-protein complex can be predicted if the amino acid sequence is known, although some exceptions are discussed. This provides another dimension to the characterization of proteins by gel electrophoresis.     

A nondenaturing vertical isoelectric focusing polyacrylamide slab gel system suitable for silver staining and electrophoretic blotting

We have devised a nondenaturing vertical isoelectric focusing (IEF)-polyacrylamide gel electrophoresis (PAGE) system which is amenable to silver staining and electroblotting. Apart from being accessible, inexpensive, and simple to use, this new methodology overcomes problems inherent in current IEF methods, for example, pH gradient drift, nonuniform cooling, restricted sample volume, and inability to perform electroblotting. Two photopolymerization gel formulas were derived: a 5% acrylamide formula using bisacrylamide (Bis) as the crosslinker and a 6% acrylamide formula using diallyltartdiamide (DATD) as the crosslinker. The 5% acrylamide Bis gel gave excellent resolution and separation of proteins whereas the 6% acrylamide DATD gel expanded slightly during silver staining, resulting in mild band distortions. At least 80 ng of protein per band could be detected by the silver staining protocol devised. Both the DATD and the Bis gels were suitable for electroblot transfer. Parameters to ensure the optimum conditions for reproducible, high resolution vertical IEF-PAGE are described. IEF-PAGE silver staining and electroblotting procedures and silver staining of the nitrocellulose electroblot procedures are also described. The advantages of this methodology over previously published methods are discussed.