Construction of an <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cell-surface display system using a putative GPI-anchored protein

A novel cell-surface display system was constructed in Aspergillus oryzae. Each of the five genes encoding the putative cell-wall-localized protein from the A. oryzae genome was cloned and these cell-surface anchor functions were examined by fusion to the C-terminal of the green fluorescent protein (GFP). Using the MP1 and CWP proteins as anchor proteins, GFP signals were strongly observed on the cell surface of recombinant A. oryzae. When these proteins were used as anchor proteins for cell-surface display of β-glucosidase from A. oryzae, enzyme activity was detected on the cell surface. In particular, β-glucosidase activity of recombinant A. oryzae using MP1, a putative glycosylphosphatidylinositol (GPI) anchor protein was higher than CWP. Based on these results, it was concluded that the MP1 protein can act as a GPI-anchor protein in A. oryzae, and the proposed cell-surface display system using MP1 allows for the display of heterogeneous and endogenous proteins.     

Novel surface display system for heterogonous proteins on Lactobacillus plantarum

Aims: To establish a novel cell surface display system that would enable the display of target proteins on Lactobacillus plantarum. Methods and Results: Blast P analysis of the amino acids sequence data revealed that the N‐terminus of the putative muropeptidase MurO from L. plantarum contained two putative lysin motif (LysM) repeat regions, implying that the MurO was involved in bacterial cell wall binding. To investigate the potential of MurO for surface display, green fluorescent protein (GFP) was fused to MurO at its C‐terminus and the resulting fusion protein was expressed in Escherichia coli. After being mixed with L. plantarum cells in vitro, GFP was successfully displayed on the surfaces of L. plantarum cells. Increases in the fluorescence intensities of chemically pretreated L. plantarum cells compared to those of nonpretreated cells suggested that the peptidoglycan was the binding ligand for MurO. SDS sensitivity assay showed that the GFP fluorescence intensity was reduced after being treated with SDS. To demonstrate the applicability of the MurO‐mediated surface display system, β‐galactosidase from Bifidobacterium bifidium, in place of GFP, was functionally displayed on the surface of L. plantarum cells via MurO. Conclusions: The MurO was a novel anchor protein for constructing a surface display system for L. plantarum. Significance and Impact of Study: The success in surface display of GFP and β‐galactosidase opened up the feasibility of employing the cell wall anchor of MurO for surface display in L. plantarum.     

Construction of Yeast Strains with High Cell Surface Lipase Activity by Using Novel Display Systems Based on the Flo1p Flocculation Functional Domain

We constructed a novel cell-surface display system, using as a new type of cell-wall anchor 3,297 or 4,341 bp of the 3′ region of the FLO1 gene (FS or FL gene, respectively), which encodes the flocculation functional domain of Flo1p. In this system, the N terminus of the target protein was fused to the FS or FL protein and the fusion proteins were expressed under the control of the inducible promoter UPR-ICL (5′ upstream region of the isocitrate lyase of Candida tropicalis). Using this new system, recombinant lipase with a pro sequence from Rhizopus oryzae (rProROL), which has its active site near the C terminus, was displayed on the cell surface. Cell-surface display of the FSProROL and FLProROL fusion proteins was confirmed by immunofluorescence microscopy and immunoblotting. Lipase activity reached 145 IU/liter (61.3 IU/g [dry cell weight]) on the surface of the yeast cells, which successfully catalyzed the methanolysis reaction. Using these whole-cell biocatalysts, methylesters synthesized from triglyceride and methanol reached 78.3% after 72 h of reaction. To our knowledge, this is the first example of cell-surface display of lipase with high activity. Interestingly, the yeast cells displaying the FLProROL protein showed strong flocculation, even though the glycosylphosphatidylinositol anchor attachment signal and cell-membrane-anchoring region of Flo1p had been deleted from this gene. The cell-surface display system based on FL thus endows the yeast strain with both novel enzyme display and strong flocculation ability.     

System Using Tandem Repeats of the cA Peptidoglycan-Binding Domain from Lactococcus lactis for Display of both N- and C-Terminal Fusions on Cell Surfaces of Lactic Acid Bacteria

Here, we established a system for displaying heterologous protein to the C terminus of the peptidoglycan-binding domain (cA domain) of AcmA (a major autolysin from Lactococcus lactis). Western blot and flow cytometric analyses revealed that the fusion proteins (cA-AmyA) of the cA domain and α-amylase from Streptococcus bovis 148 (AmyA) are efficiently expressed and successfully displayed on the surfaces of L. lactis cells. AmyA was also displayed on the cell surface while retaining its activity. Moreover, with an increase in the number of cA domains, the quantity of cA-AmyA fusion proteins displayed on the cell surface increased. When three repeats of the cA domain were used as an anchor protein, 82% of α-amylase activity was detected on the cells. The raw starch-degrading activity of AmyA was significantly higher when AmyA was fused to the C terminus of the cA domain than when it was fused to the N terminus. In addition, cA-AmyA fusion proteins were successfully displayed on the cell surfaces of Lactobacillus plantarum and Lactobacillus casei.     

Enhancing the stability of xylanase from Cellulomonas fimi by cell-surface display on Escherichia coli

Aims: The cell‐surface display of Cex, which encodes xylanase and exoglucanase from Cellulomonas fimi, was constructed on Escherichia coli using PgsA as the anchor protein. Characterization of the cell‐surface display of Cex was performed. Methods and Results: PgsA was fused to the N‐terminus of Cex and six histidines were utilized as spacers between the targeting and anchor proteins. Successful cell‐surface display of Cex was demonstrated by Western blot and immunofluorescence analyses on E. coli C41 (DE3). According to the time‐course analysis, the xylanase activity of Cex was achieved at 49 U g^?1 dry cell weight after 12 h culture at 37°C. The optimal temperature and pH ranges of the cell‐surface displayed protein with whole‐cell were broader than the corresponding ranges of the purified form. Further determination of thermostability indicated that the half‐life of cell‐surface displayed Cex was 1·6 times longer than that of purified Cex at 60°C. Conclusions: We have successfully developed the cell‐surface display of xylanase on E. coli. The cell‐surface display can enhance the stability of xylanase against changes in temperature and has the potential of becoming a whole‐cell biocatalyst for industrial applications, such as biobleaching of paper and production of renewable energy. Significance and Impact of the Study: The results demonstrated that the cell‐surface display of xylanase embedded in the cell membrane is more stable than that of the purified enzyme. Thus, to improve the stability of heterologous proteins production, cell‐surface display using the PgsA anchor protein as a tool can be considered in E. coli.     

Development of novel cell surface display in <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> using porin

We have developed a novel cell surface display in Corynebacterium glutamicum using porin proteins as anchor proteins. Porins are localized at C. glutamicum mycolic acid layer and exist as a hexamer. We used α-amylase from Streptococcus bovis 148 (AmyA) as a model protein to be displayed on the C. glutamicum cell surface. AmyA was fused to the C terminus of the porins PorB, PorC, or PorH. Expression vectors using fused proteins under the control of the cspB promoter were constructed and introduced into the C. glutamicum Cm strain. Immunostaining microscopy and flow cytometric analysis revealed that PorB-AmyA, PorC-AmyA, and PorH-AmyA were displayed on the C. glutamicum cell surface. AmyA activity was only detected in the cell fraction of C. glutamicum cells that displayed AmyA fused to PorB, PorC or PorH and AmyA activity was not detected in the supernatants of C. glutamicum culture broths after 72 h cultivation. Thus, we have demonstrated that C. glutamicum porins are very efficient anchor proteins for protein display in C. glutamicum.     

Construction of a novel synergistic system for production and recovery of secreted recombinant proteins by the cell surface engineering

We determined whether the cocultivation of yeast cells displaying a ZZ-domain and secreting an Fc fusion protein can be a novel tool for the recovery of secreted recombinant proteins. The ZZ-domain from Staphylococcus aureus protein A was displayed on the cell surface of Saccharomyces cerevisiae under the control of the GAL1 promoter. Strain S. cerevisiae BY4742 cells displaying the ZZ-domain on their surface were used for cocultivation with cells that produce a target protein fused to the Fc fragment as an affinity tag. The enhanced green fluorescent protein or Rhizopus oryzae lipase was genetically fused to the N and C termini of the Fc fragment of human immunoglobulin G, respectively. Through analysis by fluorescence-activated cell sorting and enzymatic assay, it was demonstrated that these fusion proteins are successfully produced in the medium and recovered by affinity binding with the cell surface displaying the ZZ-domain. These results suggest that the ZZ-domain-displaying cell and Fc fusion protein-secreting cell can be applied to use in synergistic process of production and recovery of secreted recombinant proteins.     

Construction of yeast strains with high cell surface lipase activity by using novel display systems based on the Flo1p flocculation functional domain

We constructed a novel cell-surface display system, using as a new type of cell-wall anchor 3,297 or 4,341 bp of the 3' region of the FLO1 gene (FS or FL gene, respectively), which encodes the flocculation functional domain of Flo1p. In this system, the N terminus of the target protein was fused to the FS or FL protein and the fusion proteins were expressed under the control of the inducible promoter UPR-ICL (5' upstream region of the isocitrate lyase of Candida tropicalis). Using this new system, recombinant lipase with a pro sequence from Rhizopus oryzae (rProROL), which has its active site near the C terminus, was displayed on the cell surface. Cell-surface display of the FSProROL and FLProROL fusion proteins was confirmed by immunofluorescence microscopy and immunoblotting. Lipase activity reached 145 IU/liter (61.3 IU/g [dry cell weight]) on the surface of the yeast cells, which successfully catalyzed the methanolysis reaction. Using these whole-cell biocatalysts, methylesters synthesized from triglyceride and methanol reached 78.3% after 72 h of reaction. To our knowledge, this is the first example of cell-surface display of lipase with high activity. Interestingly, the yeast cells displaying the FLProROL protein showed strong flocculation, even though the glycosylphosphatidylinositol anchor attachment signal and cell-membrane-anchoring region of Flo1p had been deleted from this gene. The cell-surface display system based on FL thus endows the yeast strain with both novel enzyme display and strong flocculation ability.     

Improvement in organophosphorus hydrolase activity of cell surface-engineered yeast strain using Flo1p anchor system

Organophosphorus hydrolase (OPH) hydrolyzes organophosphorus esters. We constructed the yeast-displayed OPH using Flo1p anchor system. In this system, the N-terminal region of the protein was fused to Flo1p and the fusion protein was displayed on the cell surface. Hydrolytic reactions with paraoxon were carried out during 24 h of incubation of OPH-displaying cells at 30°C. p-Nitrophenol produced in the reaction mixture was detected by HPLC. The strain with highest activity showed 8-fold greater OPH activity compared with cells engineered using glycosylphosphatidylinositol anchor system, and showed 20-fold greater activity than Escherichia coli using the ice nucleation protein anchor system. These results indicate that Flo1p anchor system is suitable for display of OPH in the cell surface-expression systems.     

Surface displayed expression of a neutralizing epitope of spike protein from a Korean strain of porcine epidemic diarrhea virus

The neutralizing epitope (K-COE) of the spike protein from a Korean strain of porcine epidemic diarrhea virus (PEDV) has been shown to prevent and foster an immune response to PED, when orally adjusted. The cell surface of the budding yeast,Saccharomyces cerevisiae, was engineered to anchor the K-COE on the outer layer of the cell, and consequently, the altered yeast was applied as a dietary complement for animal feed, with immunogenic functions. In this study, the K-COE gene (K-COE) of the Korean strain of PEDV with the signal peptide of rice amylase 1A (Ramy 1A), was fused with the gene encoding the carboxyterminal half (320 amino acid residues from the C terminus) of yeast α-agglutinin, a mating associated protein that is anchored covalently to the cell wall. The glyceraldehyde-3-phosphate dehydrogenase (GPD) promoter was selected in order to direct the expression of the fusion construct, and the resulting recombinant plasmid was then introduced intoS. cerevisiae. The surface display of K-COE was visualized via confocal microscopy using a polyclonal antibody against K-COE as the primary antibody, and FITC (fluorescein isothiocyanate)-conjugated goat anti-mouse IgG as the secondary antibody. The display of the K-COE on the cell surface was further verified via Western blot analysis using the cell wall fraction after the administration of α-1,3-glucanase/PNGase F/β-mannosidase treatment.     

Production of glucoamylase in pyruvate decarboxylase deletion mutants of the yeast Kluyveromyces lactis

We have developed a novel Escherichia coli cell surface display system by employing PgsA as an anchoring motif. In our display system, C-terminal fusion to PgsA anchor protein from Bacillus subtilis was used. The enzymes selected for display were α-amylase (AmyA) from Streptococcus bovis 148 and lipase B (CALB) from Candida antarctica. The molecular mass values of AmyA and CALB are approximately 77 and 34 kDa, respectively. The enzymes were displayed on the surface as a fusion protein with a FLAG peptide tag at the C terminus. Both the PgsA-AmyA-FLAG and PgsA-CALB-FLAG fusion proteins were shown to be displayed by immunofluorescence labeling using anti-FLAG antibody. The displayed enzymes were active forms, and AmyA and CALB activities reached 990 U/g (dry cell weight) and 4.6 U/g (dry cell weight), respectively. AmyA-displaying E. coli cells grew utilizing cornstarch as the sole carbon source, while CALB-displaying E. coli cells catalyzed enantioselective transesterification, indicating that they are effective whole-cell biocatalysts. Since a target enzyme with a size of 77 kDa and an industrially useful lipase have been successfully displayed on the cell surface of E. coli for the first time, PgsA protein is probably a useful anchoring motif to display various enzymes.     

Display of α-amylase on the surface of <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> cells by using NCgl1221 as the anchoring protein,and production of glutamate from starch

We developed a new cell surface display system in Corynebacterium glutamicum based on the C-terminally truncated NCgl1221 anchor protein to increase l-glutamate production from starch directly. The C-terminally truncated NCgl1221 protein is a mutant NCgl1221 and leads to the constitutive export of l-glutamate. The N terminus of α-amylase (AmyA) was fused to truncated NCgl1221, and the resulting fusion protein was expressed on the cell surface by IPTG induction. Localization of the fusion protein was confirmed by immunofluorescence microscopy and flow cytometric analysis. The results of l-glutamate fermentation showed that the soluble starch was utilized to grow and produce l-glutamate by the recombinant strain displaying AmyA. The amount of soluble starch was reduced from 30.0 ± 2.8 to 4.5 ± 0.7 g/l under non-inducing condition and from 50.0 ± 2.4 to 12.5 ± 1.1 g/l under biotin limitation in 36 h. The glutamate concentration in the medium was transiently increased in 14 h under no induction, while under biotin-limiting condition, glutamate production was continuously elevated during fermentation. The amount of glutamate reached 19.3 ± 2.1 g/l after 26 h of fermentation with biotin limitation, which was greater than that produced by the strain using PgsA, one of the poly-γ-glutamate synthetase complexes, as the anchor protein under the same condition. Therefore, the truncated NCgl1221 anchor protein has more advantages than the PgsA anchor protein in glutamate fermentation because truncated NCgl1221 leads to the constitutive export of l-glutamate without any treatments.     

基于谷氨酸棒杆菌NCgl1221蛋白的新型细菌表面展示系统

【目的】开发一种新型的大肠杆菌表面展示系统,为C末端截短NCgl1221蛋白作为锚定蛋白提供科学依据,丰富并优化细菌表面展示系统。【方法】扩增C末端截短NCgl1221序列和β-淀粉酶基因,构建融合蛋白表达载体。将重组载体PET-NA和空载体PET-28a分别转入Rosetta(DE3)pLysS中,IPTG诱导表达,SDS-PAGE和Western blot鉴定融合蛋白表达情况。将诱导表达菌株进行免疫荧光染色,荧光显微镜观察和流式细胞分析检测β-淀粉酶的展示。酶活测定和淀粉水解分析验证被展示β-淀粉酶的活性。【结果】融合蛋白成功地在大肠杆菌中表达,有活性的β-淀粉酶通过与锚定蛋白C末端的融合被展示在了宿主菌表面,展示β-淀粉酶的重组菌可以水解利用培养基中的淀粉。【结论】成功开发了一种以C末端截短NCgl1221为锚定蛋白的新型大肠杆菌表面展示系统,并以此系统展示了分子量大小为56 kDa的活性酶,为该系统在全细胞催化剂或吸附剂等方面的应用奠定了基础。     

Display of α-Amylase on the Surface of Lactobacillus casei Cells by Use of the PgsA Anchor Protein, and Production of Lactic Acid from Starch

We developed a new cell surface engineering system based on the PgsA anchor protein from Bacillus subtilis. In this system, the N terminus of the target protein was fused to the PgsA protein and the resulting fusion protein was expressed on the cell surface. Using this new system, we constructed a novel starch-degrading strain of Lactobacillus casei by genetically displaying α-amylase from the Streptococcus bovis strain 148 with a FLAG peptide tag (AmyAF). Localization of the PgsA-AmyA-FLAG fusion protein on the cell surface was confirmed by immunofluorescence microscopy and flow cytometric analysis. The lactic acid bacteria which displayed AmyAF showed significantly elevated hydrolytic activity toward soluble starch. By fermentation using AmyAF-displaying L. casei cells, 50 g/liter of soluble starch was reduced to 13.7 g/liter, and 21.8 g/liter of lactic acid was produced within about 24 h. The yield in terms of grams of lactic acid produced per gram of carbohydrate utilized was 0.60 g per g of carbohydrate consumed at 24 h. Since AmyA was immobilized on the cells, cells were recovered after fermentation and used repeatedly. During repeated utilization of cells, the lactic acid yield was improved to 0.81 g per g of carbohydrate consumed at 72 h. These results indicate that efficient simultaneous saccharification and fermentation from soluble starch to lactic acid were carried out by recombinant L. casei cells with cell surface display of AmyA.     

Construction of a Novel <Emphasis Type="Italic">Pichia pastoris</Emphasis> Cell-Surface Display System Based on the Cell Wall Protein Pir1

A novel system based on Pir1 from Saccharomyces cerevisiae was developed for cell-surface display of heterologous proteins in Pichia pastoris with the alpha-factor secretion signal sequence. As a model protein, enhanced green fluorescence protein (EGFP) was fused to the N-terminal of the mature peptide of Pir1 (Pir1-a). The expression of fusion protein EGFP-Pir1-a was irregular throughout the P. pastoris cell surface per detection by confocal laser scanning microscopy. A truncated sequence containing only the internal repetitive sequences of Pir1-a (Pir1-b) was used as a new anchor protein in further study. The fusion protein EGFP-Pir1-b was expressed uniformly on the cell surface. The fluorescence intensity of the whole yeast was measured by spectrofluorometer. Western blot confirmed that the fusion proteins were released from cell walls after mild alkaline treatment. The results indicate that a Pir1-based system can express proteins on the surface of P. pastoris and that the fusion proteins do not affect the manner in which Pir1 attaches to the cell wall. The repetitive sequences of Pir1 are required for cell wall retention, and the C-terminal sequence contributes to the irregular distribution of fusion proteins in P. pastoris.     

Construction of an engineered yeast with glucose-inducible emission of green fluorescence from the cell surface

An engineered yeast with emission of fluorescence from the cell surface was constructed. Cell surface engineering was applied to display a visible reporter molecule, green fluorescent protein (GFP). A glucose-inducible promoter GAPDH as a model promoter was selected to control the expression of the reporter gene in response to environmental changes. The GFP gene was fused with the gene encoding the C-terminal half of α-agglutinin of Saccharomyces cerevisiae having a glycosylphosphatidylinositol anchor attachment signal sequence. A secretion signal sequence of the fungal glucoamylase precursor protein was connected to the N-terminal of GFP. This designed gene was integrated into the TRP1 locus of the chromosome of S. cerevisiae with homologous recombination. Fluorescence microscopy demonstrated that the transformant cells emitted green fluorescence derived from functionally expressed GFP involved in the fusion molecule. The surface display of GFP was further verified by immunofluorescence labeling with a polyclonal antibody (raised in rabbits) against GFP as the first antibody and Rhodamine Red-X-conjugated goat anti-rabbit IgG as the second antibody which cannot penetrate into the cell membrane. The display of GFP on the cell surface was confirmed using a confocal laser scanning microscope and by measuring fluorescence in each cell fraction obtained after the subcellular fractionation. As GFP was proved to be displayed as an active form on the cell surface, selection of promoters will endow yeast cells with abilities to respond to changes in environmental conditions, including nutrient concentrations in the media, through the emission of fluorescence. Received: 23 August 1999 / Received revision: 16 November 1999 / Accepted: 29 November 1999     

Expression of family 3 cellulose-binding module (CBM3) as an affinity tag for recombinant proteins in yeast

Easy and low-cost protein purification methods for the mass production of commonly used enzymes that play important roles in biotechnology are in high demand. In this study, we developed a fast, low-cost recombinant protein purification system in the methylotrophic yeast Pichia pastoris using the family 3 cellulose-binding module (CBM3)-based affinity tag. The codon of the cbm3 gene from Clostridium thermocellum was optimized based on the codon usage of P. pastoris. The CBM3 tag was then fused with enhanced green fluorescent protein (CBM3-EGFP) or with inulinase and expressed in P. pastoris to demonstrate its ability to function as an affinity tag in a yeast expression system. We also examined the effects of glycosylation on the secreted CBM3-tag. The secreted wild-type CBM3-EGFP was glycosylated; however, this had little influence on the adsorption of the fusion protein to the regenerated amorphous cellulose (RAC; maximum adsorption capacity of 319 mg/g). Two CBM3-EGFP mutants lacking glycosylation sites were also constructed. The three CBM3-EGFPs expressed in P. pastoris and the CBM3-EGFP expressed in Escherichia coli all had similar RAC adsorption capacity. To construct a tag-free recombinant protein purification system based on CBM3, a CBM3-intein-EGFP fusion protein was expressed in P. pastoris. This fusion protein was stably expressed and the self-cleavage of intein was efficiently induced by DTT or l-cysteine. In this study, we were able to purify the recombinant fusion protein with high efficiency using both intein and direct fusion-based strategies.     

Cell Wall Regeneration in Bangia atropurpurea (Rhodophyta) Protoplasts Observed Using a Mannan-Specific Carbohydrate-Binding Module

The cell wall of the red alga Bangia atropurpurea is composed of three unique polysaccharides (β-1,4-mannan, β-1,3-xylan, and porphyran), similar to that in Porphyra. In this study, we visualized β-mannan in the regenerating cell walls of B. atropurpurea protoplasts by using a fusion protein of a carbohydrate-binding module (CBM) and green fluorescent protein (GFP). A mannan-binding family 27 CBM (CBM27) of β-1,4-mannanase (Man5C) from Vibrio sp. strain MA-138 was fused to GFP, and the resultant fusion protein (GFP–CBM27) was expressed in Escherichia coli. Native affinity gel electrophoresis revealed that GFP–CBM27 maintained its binding ability to soluble β-mannans, while normal GFP could not bind to β-mannans. Protoplasts were isolated from the fronds of B. atropurpurea by using three kinds of bacterial enzymes. The GFP–CBM27 was mixed with protoplasts from different growth stages, and the process of cell wall regeneration was observed by fluorescence microscopy. Some protoplasts began to excrete β-mannan at certain areas of their cell surface after 12 h of culture. As the protoplast culture progressed, β-mannans were spread on their entire cell surfaces. The percentages of protoplasts bound to GFP–CBM27 were 3%, 12%, 17%, 29%, and 25% after 12, 24, 36, 48, and 60 h of culture, respectively. Although GFP–CBM27 bound to cells at the initial growth stages, its binding to the mature fronds was not confirmed definitely. This is the first report on the visualization of β-mannan in regenerating algal cell walls by using a fluorescence-labeled CBM.     

Surface display of human lactoferrin using a glycosylphosphatidylinositol-anchored protein of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A cell surface display system was developed in Pichia pastoris using the gene TIP1, encoding the glycosylphosphatidylinositol (GPI)-anchored protein of Saccharomyces cerevisiae (ScTIP). Human lactoferrin cDNA (hLf) was fused to a full-length TIP1 DNA (ScTIP ₆₃₀ ) or a short-TIP1 fragment (ScTIP ₁₂₀ ) encoding the 40 C-terminal amino acids of ScTIP. Both hLf-ScTIP fusion genes were expressed in P. pastoris SMD 1168. The fused protein was detected by western blotting after extraction of the lysed recombinant cells with Triton X-100, urea, and Triton X-100 plus urea, suggesting that the hLf is associated with the membrane. The localization of surface-displayed hLf was confirmed by immunofluorescence confocal microscopy and flow cytometric analysis using FITC-labeled anti-hLf antibody, suggesting that hLf was successfully located at the surface of P. pastoris. The intact recombinant cells and cell lysates showed antibacterial activity against target microorganisms, meaning that the expressed hLf was biologically active. The results indicated that the ScTIP anchoring motif is useful for cell surface display of foreign proteins in P. pastoris.     

Construction of a Pichia pastoris cell-surface display system using Flo1p anchor system

A Pichia pastoris cell-surface display system was constructed using a Flo1p anchor system, which was developed in Saccharomyces cerevisiae. The lipase from Rhizopus oryzae with a pro sequence (ProROL) was used as the model protein and was genetically fused to the anchor consisting of amino acids 1-1099 of Flo1p (FS anchor). The resulting fusion protein FSProROL was expressed under the control of the alcohol oxidase 1 promoter (pAOX1). The fluorescence microscopy of immunolabeled P. pastoris cells revealed that ProROL was displayed on the cell surface, and Western blot analysis revealed that the fusion protein FSProROL was noncovalently attached to the cell wall and highly glycosylated. The lipase activity of P. pastoris cells was affected by the methanol concentration for the induction phase. Surprisingly, the activity of lipase displayed on the cells incubated at 60 degrees C was not only stable but also increased to about 6.5 times the initial value after 4 h incubation.