Biological kinetics evaluation of anaerobic stabilization pond treatment of palm oil mill effluent

Biological kinetic (bio-kinetic) study of the anaerobic stabilization pond treatment of palm oil mill effluent (POME) was carried out in a laboratory anaerobic bench scale reactor (ABSR). The reactor was operated at different feed flow-rates of 0.63, 0.76, 0.95, 1.27, 1.9 and 3.8 l of raw POME for a day. Chemical oxygen demand (COD) as influent substrates was selected for bio-kinetic study. The investigation showed that the growth yield (Y_G), specific biomass decay (b), maximum specific biomass growth rate (μ_max), saturation constant (K_s) and critical retention time (Θ_c) were in the range of 0.990 g VSS/g COD_removed day, 0.024 day⁻¹, 0.524 day⁻¹, 203.433 g COD l⁻¹ and 1.908 day, respectively.     

Simultaneous production of citric acid and invertase by Yarrowia lipolytica SUC+ transformants

Simultaneous production of citric acid (CA) and invertase by Yarrowia lipolytica A-101-B56-5 (SUC⁺ clone) growing from sucrose, mixture of glucose and fructose, glucose or glycerol was investigated. Among the tested substrates the highest concentration of CA was reached from glycerol (57.15 g/L) with high yield (Y_CA/S = 0.6 g/g). When sucrose was used, comparable amount of CA was secreted (45 g/L) with slightly higher yield (Y_CA/S = 0.643 g/g). In all cultures amount of isocitrate (ICA) was below 2% of total citrates. Considering invertase production, the best carbon source appeared to be sucrose (72 380 U/L). The highest yield of CA and invertase biosynthesis calculated for 1 g of biomass was obtained for cells growing from glycerol (9.9 g/g and 4325 U/g, respectively). Concentrates of extra- and intracellular invertase of the highest activity were obtained from sucrose as substrate (0.5 and 1.8 × 10⁶ U/L, respectively).     

In silico optimization and low structured kinetic model of poly[(R)-3-hydroxybutyrate] synthesis by Cupriavidus necator DSM 545 by fed-batch cultivation on glycerol

Glycerol was utilized by Cupriavidus necator DSM 545 for production of poly-3-hydroxybutyrate (PHB) in fed-batch fermentation. Maximal specific growth rates (0.12 and 0.3 h⁻¹) and maximal specific non-growth PHB production rate (0.16 g g⁻¹ h⁻¹) were determined from two experiments (inocula from exponential and stationary phase). Saturation constants for nitrogen (0.107 and 0.016 g L⁻¹), glycerol (0.05 g L⁻¹), non-growth related PHB synthesis (0.011 g L⁻¹) and nitrogen/PHB related inhibition constant (0.405 g L⁻¹), were estimated. Five relations for specific growth rate were tested using mathematical models. In silico performed optimization procedures (varied glycerol/nitrogen ratio and feeding) has resulted in a PHB content of 70.9%, shorter cultivation time (23 h) and better PHB yield (0.347 g g⁻¹). Initial concentration of biomass 16.8 g L⁻¹ and glycerol concentration in broth between 3 and 5 g L⁻¹ were decisive factors for increasing of productivity.     

Cultivation of microalgae for oil production with a cultivation strategy of urea limitation

The microalgae, Chlorella sp., were cultivated in various culture modes to assess biomass and lipid productivity in this study. In the batch mode, the biomass concentrations and lipid content of Chlorella sp. cultivated in a medium containing 0.025–0.200 g L⁻¹ urea were 0.464–2.027 g L⁻¹ and 0.661–0.326 g g⁻¹, respectively. The maximum lipid productivity of 0.124 g d⁻¹ L⁻¹ occurred in a medium containing 0.100 g L⁻¹ urea. In the fed-batch cultivation, the highest lipid content was obtained by feeding 0.025 g L⁻¹ of urea during the stationary phase, but the lipid productivity was not significantly increased. However, a semi-continuous process was carried out by harvesting the culture and renewing urea at 0.025 g L⁻¹ each time when the cultivation achieved the early stationary phase. The maximum lipid productivity of 0.139 g d⁻¹ L⁻¹ in the semi-continuous culture was highest in comparison with those in the batch and fed-batch cultivations.     

Enhanced algae growth in both phototrophic and mixotrophic culture under blue light

Biomass productivity and fatty acid methyl esters (FAME) derived from intracellular lipid of a Nannochloropsis sp. isolated from Singapore’s coastal waters were studied under different light wavelengths and intensities. Nannochloropsis sp., was grown in both phototrophic and mixotrophic (glycerol as the carbon source) culture conditions in three primary monochromatic light wavelengths, i.e., red, green and blue LEDs, and also in white LED. The maximum specific growth rate (μ) for LEDs was blue > white > green > red. Nannochloropsis sp. achieved a μ of 0.64 and 0.66 d⁻¹ in phototrophic and mixotrophic cultures under blue lighting, respectively. The intracellular fatty acid composition of Nannochloropsis sp. varied between cultures exposed to different wavelengths, although the absolute fatty acid content did differ significantly. Maximum FAME yield from Nannochloropsis sp. was 20.45% and 15.11% of dry biomass weight equivalent under photo- and mixotrophic culture conditions respectively for cultures exposed to green LED (550 nm). However, maximum volumetric FAME yield was achieved for phototrophic and mixotrophic cultures (i.e., 55.13 and 111.96 mg/l, respectively) upon cell exposure to blue LED (470 nm) due to highest biomass productivity. It was calculated that incremental exposure of light intensity over the cell growth cycle saves almost 20% of the energy input relative to continuous illumination for a given light intensity.     

Lipid production from Yarrowia lipolytica Po1g grown in sugarcane bagasse hydrolysate

This study investigated the possibility of utilizing detoxified sugarcane bagasse hydrolysate (DSCBH) as an alternative carbon source to culture Yarrowia lipolytica Po1g for microbial oil and biodiesel production. Sugarcane bagasse hydrolysis with 2.5% HCl resulted in maximum total sugar concentration (21.38 g/L) in which 13.59 g/L is xylose, 3.98 g/L is glucose, and 2.78 g/L is arabinose. Detoxification of SCBH by Ca(OH)₂ neutralization reduced the concentration of 5-hydroxymethylfurfural and furfural by 21.31% and 24.84%, respectively. Growth of Y. lipolytica Po1g in DSCBH with peptone as the nitrogen source gave maximum biomass concentration (11.42 g/L) compared to NH₄NO₃ (6.49 g/L). With peptone as the nitrogen source, DSCBH resulted in better biomass concentration than d-glucose (10.19 g/L), d-xylose (9.89 g/L) and NDSCBH (5.88 g/L). The maximum lipid content, lipid yield and lipid productivity of Y. lipolytica Po1g grown in DSCBH and peptone was 58.5%, 6.68 g/L and 1.76 g/L-day, respectively.     

Use of glycerol for producing 1,3-dihydroxyacetone by Gluconobacter oxydans in an airlift bioreactor

1,3-Dihydroxyacetone can be produced by biotransformation of glycerol with glycerol dehydrogenase from Gluconobacter oxydans cells. Firstly, improvement the activity of glycerol dehydrogenase was carried out by medium optimization. The optimal medium for cell cultivation was composed of 5.6 g/l yeast extract, 4.7 g/l glycerol, 42.1 g/l mannitol, 0.5 g/l K₂HPO₄, 0.5 g/l KH₂PO₄, 0.1 g/l MgSO₄·7H₂O, and 2.0 g/l CaCO₃ with the initial pH of 4.9. Secondly, an internal loop airlift bioreactor was applied for DHA production from glycerol by resting cells of G. oxydans ZJB09113. Furthermore, the effects of pH, aeration rate and cell content on DHA production and glycerol feeding strategy were investigated. 156.3 ± 7.8 g/l of maximal DHA concentration with 89.8 ± 2.4% of conversion rate of glycerol to DHA was achieved after 72 h of biotransformation using 10 g/l resting cells at 30 °C, pH 5.0 and 1.5 vvm of aeration rate.     

l-Lactic acid production by Bacillus subtilis MUR1 in continuous culture

A novel UV-induced mutant strain of recombinant Bacillus subtilis MUR1 was used for the production of l-LA in continuous cultures with a variety of culture conditions. The maximal productivity of 17.6 g/L/h was obtained with a l-LA concentration of 44.1 g/L at the dilution rate of 0.4 h⁻¹. The highest concentration of l-LA (77.1 g/L) was produced at the dilution rate of 0.05 h⁻¹. This study showed that the maximum l-LA productivity of B. subtilis MUR1 which can only last for a very short period of time during the exponential phase in fed-batch cultures, can be extended indefinitely at steady state in continuous cultures. l-LA production increased with the increase of yeast extract concentrations in the medium. Moreover, temperature, agitation rate and various glucose concentrations in the feed were compared in continuous cultures. Different nitrogen sources (lysine, glutamine, ammonium sulphate and corn steep liquor) were studied to partly or completely replace yeast extract in the medium, most of them showed positive effects on l-LA production and cell growth. The l-LA productivities from continuous cultures in this study are higher than the productivity of current microbial industrial processes which use Lactobacillus to produce l-LA.     

Biomass production and nitrogen and phosphorus removal by the green alga Neochloris oleoabundans in simulated wastewater and secondary municipal wastewater effluent

Biomass productivity of 350 mg DCW L⁻¹ day⁻¹ with a final biomass concentration of 3.15 g DCW L⁻¹ was obtained with Neochloris oleoabundans grown in artificial wastewater at sodium nitrate and phosphate concentrations of 140 and 47 mg L⁻¹, respectively, with undetectable levels of residual N and P in effluents. In secondary municipal wastewater effluents enriched with 70 mg N L⁻¹, the alga achieved a final biomass concentration of 2.1 g DCW L⁻¹ and a biomass productivity of 233.3 mg DCW L⁻¹ day⁻¹. While N removal was very sensitive to N:P ratio, P removal was independent of N:P ratio in the tested range. These results indicate that N. oleoabundans could potentially be employed for combined biofuel production and wastewater treatment.     

Influence of carbon source and inoculum type on anaerobic biomass adhesion on polyurethane foam in reactors fed with acid mine drainage

This paper analyzes the influence of carbon source and inoculum origin on the dynamics of biomass adhesion to an inert support in anaerobic reactors fed with acid mine drainage. Formic acid, lactic acid and ethanol were used as carbon sources. Two different inocula were evaluated: one taken from an UASB reactor and other from the sediment of a uranium mine. The values of average colonization rates and the maximum biomass concentration (C_max) were inversely proportional to the number of carbon atoms in each substrate. The highest C_max value (0.35 g TVS g⁻¹ foam) was observed with formic acid and anaerobic sludge as inoculum. Maximum colonization rates (v_max) were strongly influenced by the type of inoculum when ethanol and lactic acid were used. For both carbon sources, the use of mine sediment as inoculum resulted in a v_max of 0.013 g TVS g⁻¹ foam day⁻¹, whereas 0.024 g TVS g⁻¹ foam day⁻¹ was achieved with anaerobic sludge.     

Effects of CO2 concentration on growth of filamentous algae and Littorella uniflora in a Danish softwater lake

An experiment was conducted from May to November in Lake Hampen, Denmark, to study the effect of higher CO₂ concentration on the biomass of filamentous algae. Three enclosures (1.5 m diameter) were enriched with free CO₂ to ∼10 times atmospheric equilibrium (∼170 μM) and three enclosures were kept at atmospheric equilibrium (∼17 μM). The isoetid Littorella uniflora dominated the vegetation in the enclosures. Low concentrations of nitrate and phosphate in the water were observed, especially in the summer months. During the summer, a high biomass of filamentous algae (dominated by Zygnema sp.) developed in both types of enclosures (18–58 g dry wt. m⁻² in July and August), but the biomass of algae was significantly higher (1.9–38 times) in the CO₂ enriched enclosures than in enclosures with low CO₂ concentration. L. uniflora biomass, especially leaf biomass, also showed a significant positive response to increased CO₂ concentration (75.0 ± 10.4 and 133.3 ± 42.5 g dry wt. m⁻² at low and high CO₂ concentrations, respectively) even though the massive filamentous algal growth decreased the light intensity. Both filamentous algae (in August) and L. uniflora showed lower tissue concentrations of N and P at high CO₂ concentration.     

Temporal and spatial dynamics of macroalgal communities along an anthropogenic salinity gradient in Biscayne Bay (Florida,USA)

The seasonal and spatial dynamics of two groups of macroalgae, drift algae and rhizophytes, commonly found in tropical seagrass meadows were studied. The aim of this study was to provide insight into how freshwater discharges may be altering seagrass-dominated nearshore tropical habitats. Species composition, biomass, and percent cover of macroalgae were collected at six Thalassia testudinum König dominated sites within Biscayne Bay, Florida, representing three salinity regimes: canal-influenced, natural sheet-flow, and oceanic conditions. Mean annual salinities in these three regimes correspond to 10, 25 and 35 psu, respectively, with much greater variability in the canal and sheet-flow regimes, than in the oceanic condition. There were distinct changes in the composition of the macroalgal community along this salinity gradient. Drift algae (Chondria spp., Laurencia spp.) were most commonly found at canal-disturbed sites (10–85 g m⁻²), while rhizophytic calcareous green algae (Halimeda spp., Penicillus spp.) were most abundant at the higher salinity oceanic sites (20–105 g m⁻²). Seasonal patterns exhibited by the two groups differed also, with drift algae being more abundant in the cooler dry-season months, while rhizophytic algae were more abundant during the warmer wet-season months. These periods of higher abundance correlated with higher growth rates (drift = 2.3% day⁻¹, rhizophytes = 0.85% day⁻¹) measured in representative species for each group. Grazing rates on drift algae were found to be low for tropical habitats and did not differ much between canal (0.44% h⁻¹) and oceanic sites (0.42% h⁻¹).     

Primary production,respiration and calcification of the temperate free-living coralline alga Lithothamnion corallioides

Calcification and primary production responses to irradiance in the temperate coralline alga Lithothamnion corallioides were measured in summer 2004 and winter 2005 in the Bay of Brest. Coralline algae were incubated in dark and clear bottles exposed to different irradiances. Net primary production reached 1.5 μmol C g⁻¹ dry wt h⁻¹ in August and was twice as high as in January–February. Dark respiration showed significant seasonal variations, being three-fold higher in summer. Maximum calcification varied from 0.6 μmol g⁻¹ dry wt h⁻¹ in summer 2004 to 0.4 μmol g⁻¹ dry wt h⁻¹ in winter 2005. According to P–E curves and the daily course of irradiance, estimated daily net production and calcification reached 131 μg C g⁻¹ dry wt and 970 μg CaCO₃ g⁻¹ dry wt in summer 2004, and 36 μg C g⁻¹ dry wt and 336 μg CaCO₃ g⁻¹ dry wt in winter 2005. The net primary production of natural L. corallioides populations in shallow waters was estimated at 10–600 g C m⁻² y⁻¹, depending on depth and algal biomass. The mean annual calcification of L. corallioides populations varied from 300 to 3000 g CaCO₃ m⁻². These results are similar to those reported for tropical coralline algae in terms of carbon and carbonate productivity. Therefore, L. corallioides can be considered as a key element of carbon and carbonate cycles in the shallow coastal waters where they live.     

Influence of ammonium sulphate feeding time on fed-batch Arthrospira (Spirulina) platensis cultivation and biomass composition with and without pH control

Previous work demonstrated that a mixture of NH₄Cl and KNO₃ as nitrogen source was beneficial to fed-batch Arthrospira (Spirulina) platensis cultivation, in terms of either lower costs or higher cell concentration. On the basis of those results, this study focused on the use of a cheaper nitrogen source mixture, namely (NH₄)₂SO₄ plus NaNO₃, varying the ammonium feeding time (T = 7-15 days), either controlling the pH by CO₂ addition or not. A. platensis was cultivated in mini-tanks at 30 °C, 156 μmol photons m⁻² s⁻¹, and starting cell concentration of 400 mg L⁻¹, on a modified Schlösser medium. T = 13 days under pH control were selected as optimum conditions, ensuring the best results in terms of biomass production (maximum cell concentration of 2911 mg L⁻¹, cell productivity of 179 mg L⁻¹ d⁻¹ and specific growth rate of 0.77 d⁻¹) and satisfactory protein and lipid contents (around 30% each).     

Production of earthworm Allolobophora parva (Eisen) in cattle dung

Vermicomposting potential of Allolobophora parva is well proven in recent experiments but little is known about its growth and reproduction performance. Efforts were made in this study to assess the biological productivity of A. parva in cattle waste solids under laboratory conditions. The growth and reproduction performance of A. parva was monitored up to its termination state in experimental beddings. A. parva was weighed weekly and cocoons produced during the interval were also counted. The maximum individual biomass and maximum growth rate (wt. mg worm⁻¹ week⁻¹) was 190.9 ± 0.07 mg (after 13 weeks) and 2.66 (after 12th week), respectively. A. parva showed the maximum values of cocoon number (within a week) and reproduction rate: 26 ± 1.12 and 0.74 ± 0.05 cocoon worm⁻¹ week⁻¹, respectively, during the 8th week of vermiculture. Cocoon production in earthworms was terminated after the 17th week of culture. Data suggested that A. parva may acts as a potential candidate to convert negligible organic waste resources into worm biomass for sustainable environmental management.     

Growth characteristics of Botryococcus braunii 765 under high CO2 concentration in photobioreactor

To understand the potential of cultivating Botryococcus braunii with flue gas (normally containing high CO₂) for biofuel production, growth characteristics of B. braunii 765 with 2-20% CO₂ aeration were investigated. The results showed that the strain could grow well without any obvious inhibition under all tested CO₂ concentrations with an aeration rate of 0.2 vvm, even without any culture pH adjustment (ranged from 6.0 to 8.0). The maximum biomass among all conditions was 2.31 g L⁻¹ on 25th day at 20% CO₂. Hydrocarbon content and algal colony size increased with the increase of CO₂ concentration. A negative correlation between algal biomass and culture total phosphorus was observed (from −0.828 to −0.911, P < 0.01). Additionally, 2% sodium hypochlorite solution was used for photobioreactor sterilization to cultivate B. braunii.     

Optimization of growth media for obtaining high-cell density cultures of halophilic archaea (family Halobacteriaceae) by response surface methodology

Optimization of media components for the growth and biomass production of Halobacterium salinarum VKMM 013 was carried out using response surface methodology. A second order quadratic model was estimated and media components were determined based on quadratic regression equation generated by model. These were 6.35 g L⁻¹ of KCl, 9.70 g L⁻¹ of MgSO₄, 13.38 g L⁻¹ of gelatin and 12.00 g L⁻¹ of soluble starch in nutrient broth supplemented with artificial seawater with 20% (w/v) of NaCl. In these optimal conditions, the obtained cell concentration of 0.746 g L⁻¹ dry weight was in agreement with the predicted cell concentration. The optimized media significantly shortened the time required for cell culture to reach the stationary phase while providing a nearly 2.4-fold increase in biomass production. Furthermore, in cell cultures of three other halophilic archaea the use of optimized media enhanced growth rate and provided high-cell density.     

Nitrogen nutrition of Canna indica: Effects of ammonium versus nitrate on growth, biomass allocation, photosynthesis, nitrate reductase activity and N uptake rates

The effects of inorganic nitrogen (N) source (NH₄⁺, NO₃⁻ or both) on growth, biomass allocation, photosynthesis, N uptake rate, nitrate reductase activity and mineral composition of Canna indica were studied in hydroponic culture. The relative growth rates (0.05-0.06 g g⁻¹ d⁻¹), biomass allocation and plant morphology of C. indica were indifferent to N nutrition. However, NH₄⁺ fed plants had higher concentrations of N in the tissues, lower concentrations of mineral cations and higher contents of chlorophylls in the leaves compared to NO₃⁻ fed plants suggesting a slight advantage of NH₄⁺ nutrition. The NO₃⁻ fed plants had lower light-saturated rates of photosynthesis (22.5 μmol m⁻² s⁻¹) than NH₄⁺ and NH₄⁺/NO₃⁻ fed plants (24.4-25.6 μmol m⁻² s⁻¹) when expressed per unit leaf area, but similar rates when expressed on a chlorophyll basis. Maximum uptake rates (V_max) of NO₃⁻ did not differ between treatments (24-35 μmol N g⁻¹ root DW h⁻¹), but V_max for NH₄⁺ was highest in NH₄⁺ fed plants (81 μmol N g⁻¹ root DW h⁻¹), intermediate in the NH₄NO₃ fed plants (52 μmol N g⁻¹ root DW h⁻¹), and lowest in the NO₃⁻ fed plants (28 μmol N g⁻¹ root DW h⁻¹). Nitrate reductase activity (NRA) was highest in leaves and was induced by NO₃⁻ in the culture solutions corresponding to the pattern seen in fast growing terrestrial species. Plants fed with only NO₃⁻ had high NRA (22 and 8 μmol NO₂⁻ g⁻¹ DW h⁻¹ in leaves and roots, respectively) whereas NRA in NH₄⁺ fed plants was close to zero. Plants supplied with both forms of N had intermediate NRA suggesting that C. indica takes up and assimilate NO₃⁻ in the presence of NH₄⁺. Our results show that C. indica is relatively indifferent to inorganic N source, which together with its high growth rate contributes to explain the occurrence of this species in flooded wetland soils as well as on terrestrial soils. Furthermore, it is concluded that C. indica is suitable for use in different types of constructed wetlands.     

Vermicomposting--An effective tool for the management of invasive weed Parthenium hysterophorus

This study reports the results of vermicomposting with Eisenia fetida of Parthenium hysterophorus mixed with cow dung in different ratios (25%, 50% and 75%) in a 18 weeks experiment. In all the treatments, a decrease in pH, OC_total and C:N ratio, but increase in EC, N_total, P_aval, Ca_total, K_total and heavy metals was recorded. The cocoons production and growth rate (biomass gain worm⁻¹ day⁻¹) were maximum in 100% cow dung. The results indicated that parthenium can be a raw material for vermicomposting if mix with cow dung in appropriate quantity.     

Enhanced 2,3-butanediol production by Klebsiella oxytoca using a two-stage agitation speed control strategy

Batch fermentative production of 2,3-butanediol by Klebsiella oxytoca was investigated using various oxygen supply methods though varying agitation speed. Based on the analysis of three kinetic parameters including specific cell growth rate (μ), specific glucose consumption rate (q_s) and specific 2,3-butanediol formation rate (q_p), a two-stage agitation speed control strategy, aimed at achieving high concentration, high yield and high productivity of 2,3-butanediol, was proposed. At the first 15 h, agitation speed was controlled at 300 rpm to obtain high μ for cell growth, subsequently agitation speed was controlled at 200 rpm to maintain high q_p for high 2,3-butanediol accumulation. Finally, the maximum concentration of 2,3-butanediol reached 95.5 g l⁻¹ with the yield of 0.478 g g⁻¹ and the productivity of 1.71 g l⁻¹ h⁻¹, which were 6.23%, 6.22% and 22.14% over the best results controlled by constant agitation speeds.