Cadmium removal from human plasma by Cibacron Blue F3GA and thionein incorporated into polymeric microspheres

Poly(2-hydroxyethylmethacrylate–ethyleneglycoldimethacrylate) [poly(HEMA–EGDMA)] microspheres carrying Cibacron Blue F3GA and/or thionein were prepared and used for the removal of cadmium ions Cd(II) from human plasma. The poly(HEMA–EGDMA) microspheres, in the size range of 150–200 μm in diameter, were produced by a modified suspension copolymerization of HEMA and EGDMA. The reactive triazinyl dye-ligand Cibacron Blue F3GA was then covalently incorporated into the microspheres. The maximum dye incorporation was 16.5 μmol/g. Then, thionein was bound onto the Cibacron Blue F3GA-incorporated microspheres under different conditions. The maximum amount of thionein bound was 14.3 mg/g. The maximum amounts of Cd(II) ions removed from human plasma by poly(HEMA–EGDMA)–Cibacron Blue F3GA and poly(HEMA–EGDMA)–Cibacron Blue F3GA–thionein were of 17.5 mg/g and 38.0 mg/g, respectively. Cd(II) ions could be repeatedly adsorbed and desorbed with both types of microspheres without significant loss in their adsorption capacity.     

New sorbent for bilirubin removal from human plasma: Cibacron Blue F3GA-immobilized poly(EGDMA–HEMA) microbeads

Cibacron Blue F3GA-immobilized poly(EGDMA–HEMA) microbeads were investigated as a specific sorbent for bilirubin removal from human plasma. The poly(EGDMA–HEMA) microbeads were prepared by a modified suspension copolymerization technique. Cibacron Blue F3GA was covalently coupled to the poly(EGDMA–HEMA) microbeads via the nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA molecule, under alkaline conditions. Bilirubin adsorption was investigated from hyperbilirubinemic human plasma on the poly(EGDMA–HEMA) microbeads containing different amounts of immobilized Cibacron Blue F3GA, (between 5.0–16.5 μmol/g). The non-specific bilirubin adsorption on the unmodified poly(EGDMA–HEMA) microbeads were 0.32 mg/g from human plasma. Higher bilirubin adsorption values, up to 14.8 mg/g, were obtained with the Cibacron Blue F3GA-immobilized microbeads. Bilirubin molecules interacted with these sorbents directly. Contribution of albumin adsorption on the bilirubin adsorption was pronounced. Bilirubin adsorption increased with increasing temperature.     

Human serum albumin chromatography by Cibacron Blue F3GA-derived microporous polyamide hollow-fiber affinity membranes

An affinity dye ligand, Cibacron Blue F3GA was covalently attached onto commercially available microporous polyamide hollow-fibre membranes for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. Different amounts of Cibacron Blue F3GA were incorporated on the polyamide hollow-fibres by changing the dye attachment conditions, i.e. initial dye concentration, addition of sodium carbonate and sodium chloride. The maximum amount of Cibacron Blue F3GA attachment was obtained at 42.5 μmol g⁻¹ when the hollow-fibres were treated with 3 M HCl for 30 min before performing the dye attachment. HSA adsorption onto unmodified and Cibacron Blue F3GA-derived polyamide hollow-fibre membranes was investigated batchwise. The non-specific adsorption of HSA was very low (6.0 mg g⁻¹ hollow-fibre). Cibacron Blue F3GA attachment onto the hollow-fibres significantly increased the HSA adsorption (147 mg g⁻¹ hollow-fibre). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (230 mg HSA g⁻¹ hollow-fibre). Desorption of HSA from Cibacron Blue F3GA derived hollow-fibres was obtained using 0.1 M Tris–HCl buffer containing 0.5 M NaSCN or 1.0 M NaCl. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to reuse Cibacron Blue F3GA derived polyamide hollow-fibre without significant decreases in the adsorption capacities.     

Development of the magnetic beads for dye ligand affinity chromatography and application to magnetically stabilized fluidized bed system

Magnetic poly(2-hydroxyethylmethacrylate) [mPHEMA] beads were prepared by suspension polymerization of HEMA in the presence of Fe₃O₄ nano-powder. Cibacron Blue F3GA was covalently immobilized to the mPHEMA beads via nucleophilic substitution reaction between chloride of its triazine ring and hydroxyl groups of HEMA under alkaline conditions. The mPHEMA/Cibacron Blue F3GA beads (100–140 μm in diameter) carrying 68.3 μmol Cibacron Blue F3GA per gram polymer were used for β-casein adsorption studies. Adsorption studies were performed under different conditions in a batch system (i.e., pH, β-casein initial concentration, temperature, and ionic strength) and then in a magnetically stabilized fluidized bed (MSFB) system. The swelling ratio of the mPHEMA was 62.1%. The maximum adsorption capacity for batch system was 20.2% lower as compared to the value obtained in MSFB. The mPHEMA/Cibacron Blue F3GA beads could be repeatedly applied for β-casein adsorption without significant losses in the adsorption capacity.     

Chitosan microspheres as immobilized dye affinity support for catalase adsorption

Chitosan microsphere (CS) was prepared by phase-inversion method as the support matrices. Cibacron Blue F3GA (CB) was covalently attached to the chitosan microspheres, and thus the novel dye-affinity adsorbent was obtained. These Cibacron Blue F3GA-attached chitosan microspheres (CB-CS) were used in the catalase (CAT) adsorption studies. The maximum CAT adsorption capacity of Cibacron Blue F3GA-attached chitosan microspheres was 28.4 mg/g at pH 7.0. Langmuir adsorption model was found to be applicable in interpreting CAT adsorption. Significant amount of the adsorbed CAT (up to 90.6%) was eluted in the elution medium containing 0.5 M NaSCN at pH 8.0. It appears that CB-CS can be applied for adsorption of CAT without causing any denaturation.     

Efficient removal of albumin from human serum by monosize dye-affinity beads

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for removal of human serum albumin (HSA) from human serum. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by dispersion polymerization. Cibacron Blue F3GA loading was 1.73 mol/g. HSA adsorption experiments were performed by stirred-batch adsorption. The non-specific adsorption of HSA was low (0.8 mg/g polymer). Dye attachment onto the monosize beads significantly increased the HSA adsorption (189.8 mg/g). The maximum HSA adsorption was observed at pH 5.0. With an increase of the aqueous phase concentration of sodium chloride, the adsorption capacity decreased drastically. The equilibrium adsorption of HSA significantly decreased with increasing temperature. The elution studies were performed by adding 0.1 M Tris/HCl buffer containing 0.5 M NaSCN to the HSA solutions in which adsorption equilibria had been reached. The elution results demonstrated that the adsorption of HSA to the adsorbent was reversible. The depletion efficiencies for HSA were above 87% for all studied concentrations. To test the efficiency of HSA removal from human serum, proteins in the serum and eluted portion were analyzed by two-dimensional gel electrophoresis. Eluted proteins include mainly albumin, and a small number of nonalbumin proteins such as apo-lipoprotein A1, sero-transferrin, haptoglobulin and alpha1-antitrypsin were bound by the dye-affinity beads. IgA was not identified in eluted fraction.     

Bilirubin removal from human plasma by Cibacron Blue F3GA using immobilized microporous affinity membranous capillary method

A novel affinity sorbent system for direct bilirubin removal from human plasma was developed. These new adsorbents comprise Cibacron Blue F3GA as the specific ligand, and microporous membranous poly(tetrafluoroethylene) capillary (modified by coating with a hydrophilic layer of poly(vinyl alcohol) after activation) as the carrier matrix. The affinity adsorbents carrying 126.5 micromol Cibacron Blue F3GA/g polymer was then used to remove bilirubin in a flow-injection system. Non-specific adsorption on the poly(vinyl alcohol) coated capillary remains low, and higher affinity adsorption capacity, of up to 76.2 mg/g polymer was obtained after dye immobilization. The bilirubin adsorption capacity of the affinity capillary decreased with increase in the recirculation rate of plasma. The adsorption capacity increased with increase the temperature while decreased with increase the ionic strength. The maximum adsorption was only observed in neutral solution (pH 6-7). The adsorption isotherm fitted the Langmuir model well. These new adsorbents have higher velocity of mass transfer, better adsorption capacity, less fouling, longer service life and good reusability. The results of blood tests suggested the dye affinity capillary has good blood compatibility.     

Monosize poly(glycidyl methacrylate) beads for dye-affinity purification of lysozyme

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for purification of lysozyme from chicken egg white. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by a dispersion polymerization technique. The content of epoxy groups on the surface of the poly(GMA) sample determined by the HCl-pyridine method (3.8 mmol/g). Cibacron Blue F3GA loading was 1.73 mmol/g. The monosize beads were characterized by elemental analysis, FTIR and SEM. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration, temperature and ionic strength). Maximum lysozyme adsorption amount of poly(GMA) and poly(GMA)-Cibacron Blue F3GA beads were 1.6 and 591.7 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, poly(GMA)-Cibacron Blue F3GA beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg-white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the eluted lysozyme was analyzed by SDS-PAGE and found to be 88% with recovery about 79%. The specific activity of the eluted lysozyme was high as 43,600 U/mg.     

Lysozyme purification with dye-affinity beads under magnetic field

Magnetic poly(2-hydroxyethyl methacrylate) mPHEMA beads carrying Cibacron Blue F3GA were prepared by suspension polymerization of HEMA in the presence of Fe3O4 nano-powder. Average size of spherical beads was 80-120 microm. The beads had a specific surface area of 56.0m(2)/g. The characteristic functional groups of dye-attached mPHEMA beads were analyzed by Fourier transform infrared spectrometer (FTIR) and Raman spectrometer. mPHEMA with a swelling ratio of 68% and carrying 28.5 micromol CibacronBlueF3GA/g were used for the purification of lysozyme. Adsorption studies were performed under different conditions in a magnetically stabilized fluidized bed (i.e., pH, protein concentration, flow-rate, temperature, and ionic strength). Lysozyme adsorption capacity of mPHEMA and mPHEMA/Cibacron Blue F3GA beads were 0.8 mg/g and 342 mg/g, respectively. It was observed that after 20 adsorption-desorption cycle, mPHEMA beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the desorbed lysozyme was about 87.4% with recovery about 79.6%. The specific activity of the desorbed lysozyme was high as 41.586 U/mg.     

Decoloration of textile dyes by Trametes versicolor and its effect on dye toxicity

Amaranth, Tropaeolin O, Reactive Blue 15, Congo Red, and Reactive Black 5 were completely decolorized with no dye sorption by Trametes versicolor. Cibacron Brilliant Red 3G-P, Cibacron Brilliant Yellow 3B-A, and Remazol Brilliant Blue R were partially decolorized with some dye sorbed to the biomass. The Microtox assay before decoloration showed that Amaranth and Tropaeolin O were not toxic [the percent concentration to decrease 20% of the luminescence of Vibrio fischeri (EC₂₀) was greater than 100%]; Cibacron Brilliant Yellow 3B-A, Reactive Blue 15 and Cibacron Brilliant Red 3G-P were moderately non-toxic (100% > EC₂₀ > 75%); Remazol Brilliant Blue R was toxic (75% > EC₂₀ > 50%); and Congo Red and Reactive Black 5 were moderately toxic (50% > EC₂₀ > 25%). After decoloration the toxicity of the solutions containing Amaranth, Tropaeolin O and Reactive Black 5 was unchanged; Reactive Blue 15, Remazol Brilliant Blue R and Cibacron Brilliant Red 3G-P decreased to non-toxic levels; and Cibacron Brilliant Yellow 3B-A and Congo Red became very toxic (EC₂₀ < 25%).     

Studies of the acetyl-CoA-binding site of rat liver spermidine/spermine N1-acetyltransferase.

Rat liver spermidine/spermine N1-acetyltransferase was found to be strongly inhibited by the dyes Cibacron F3GA, Coomassie Brilliant Blue and Congo Red. Inhibition was competitive with respect to acetyl-CoA and Ki values of 0.7 microM and 52 microM were determined for Cibacron F3GA and Coomassie Brilliant Blue respectively. The enzyme was strongly retained by columns of Affi-Gel Blue, which contains Cibacron F3GA linked to agarose. It was not eluted from this adsorbent in the presence of 10 mM-spermidine/0.5 M-NaCl/50 mM-Tris/HCl, pH 7.5, but was released by 1 mM-CoA in 10 mM-spermidine/50 mM-Tris/HCl, pH 7.5. These results are consistent with the presence in the enzyme of a dinucleotide fold that binds acetyl CoA and has a high affinity for Cibacron F3GA. The spermidine/spermine N1-acetyltransferase was irreversibly inactivated by exposure to butane-2,3-dione in sodium borate, pH 7.8, or by exposure to phenylglyoxal or camphorquinone-10-sulphonic acid. All of these reagents are known to interact with arginine residues in proteins under the conditions in which they inactivated the acetyltransferase. Inactivation was prevented by the presence of acetyl-CoA or CoA, but to a lesser extent by 3'-dephospho-CoA and not at all by NAD or adenosine. This protection suggests that an arginine residue at the active site is involved in the binding of the acetyl-CoA substrate. Treatment of the assay mixture but not the spermidine N1-acetyltransferase with alkaline phosphatase prevented the reaction taking place. This suggests that the apparent loss of enzyme activity in response to alkaline phosphatase reported by Matsui, Otani, Kamei & Morisawa [(1982) FEBS Lett. 150, 211-213] is due to dephosphorylation of the acetyl-CoA substrate and that the 3'-phosphate group is essential for activity.     

Bacterial cellulose nanofibers for albumin depletion from human serum

Cibacron Blue F3GA (CB) was covalently attached onto the bacterial cellulose (BC) nanofibers for human serum albumin (HSA) depletion from human serum. The BC nanofibers were produced by Acetobacter xylinum in the Hestrin–Schramm medium in a static condition for 14 days. The CB content of the BC nanofibers was 178 μmol/g. The specific surface area of the BC nanofibers was determined to be 914 m²/g. HSA adsorption experiments were performed by stirred-batch adsorption. The non-specific adsorption of HSA on the BC nanofibers was very low (1.4 mg/g polymer). CB attachment onto the BC nanofibers significantly increased the HSA adsorption (1800 mg/g). The maximum HSA adsorption was observed at pH 5.0. The HSA adsorption capacity decreased drastically with an increase of the aqueous phase concentration of sodium chloride. The elution studies were performed by adding 1 M NaCl to the HSA solutions in which adsorption equilibria had been reached. The elution results demonstrated that the binding of HSA to the adsorbent was reversible. The depletion efficiencies for HSA were above 96.5% for all studied concentrations. Proteins in the serum and eluted portion were analyzed by SDS-PAGE for testing the efficiency of HSA depletion from human serum. Eluted proteins include mainly HSA.     

Magnetic dye-affinity beads for human serum albumin purification

Cibacron Blue F3GA was covalently attached onto magnetic poly(vinyl alcohol) (mPVAL) beads (100-150 μm in diameter) for human serum albumin (HSA) adsorption from human plasma. Despite low nonspecific adsorption of HSA on mPVAL beads, Cibacron Blue F3GA attachment significantly increased the HSA adsorption. The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma. Desorption of HSA from mPVAL beads was achieved by medium containing 1.0 M KSCN at pH 8.0. To test the efficiency of albumin adsorption from human serum, before and after albumin adsorption was demonstrated with sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analyses. HSA molecules could be reversibly adsorbed and desorbed 10 times with the magnetic beads without noticeable loss in their HSA adsorption capacity.     

Effect of polymer shielding on elution of G3PDH bound to dye-ligand adsorbent

Batch binding experiments were performed to assess the recovery performance of glyceraldehyde 3-phosphate dehydrogenase (G3PDH) bound to the unshielded and polymer (polyvinyl pyrrolidone, PVP)-shielded dye-ligand (Cibacron Blue 3GA) adsorbent. The adoption of a polymer-shielded, dye-ligand technique facilitated the elution efficiency of bound G3PDH. It was demonstrated that the recovery of G3PDH using polymer-shielded dye-ligand adsorption yielded higher elution efficiency, at 60.5% and a specific activity of 42.3 IU/mg, after a low ionic strength elution (0.15 M NaCl). The unshielded dye-ligand yielded lower elution efficiency, at 6.5% and a specific activity of 10.2 IU/mg.     

Adsorption of papain with Cibacron Blue F3GA carrying chitosan-coated nylon affinity membranes

Covalent coupling of chitosan (CS) to activated nylon membrane was performed after the reaction of the microporous nylon membrane with formaldehyde. Non-specific adsorption on the CS-coated nylon membrane decreased greatly, compared with plain nylon membrane. The dye Cibacron Blue F3GA (CB F3GA) as a ligand was then covalently immobilized on the CS-coated membranes. Physical properties of the composite membrane and its applications in affinity membrane chromatography were examined. The contents of CS and CB F3GA-attached membranes were 89.6 mg/g nylon membrane and 146.1 micromol/g nylon membrane, respectively. These CB F3GA-attached composite membranes were used in the papain adsorption studies. Higher papain adsorption capacity, up to 235.3mg/g affinity membrane, was obtained. The adsorption isotherm fitted the Freundlich model well. Significant amount of the adsorbed papain (about 94.3%) was eluted by 1.0M NaSCN at pH 9.0. Experiments on regeneration and dynamic adsorption were also performed. It appears that CB F3GA-CS nylon membranes can be applied for papain separation without causing any denaturation.     

Affinity adsorption of lysozyme on a macroligand prepared with Cibacron Blue 3GA attached to yeast cells

The objective of this study was the development of affinity adsorbent particles with the appropriate characteristics to be applied in protein purification using the affinity ultrafiltration method. To prepare affinity macroligands Cibacron Blue 3GA, as a ligand molecule, was immobilized by covalent bonding onto yeast cell walls, the support material or matrix. The maximum attachment of the ligand to the matrix was 212 μmol/g (ligand dry weight/yeast dry weight). Lysozyme was selected as the protein model for the adsorption studies. Its adsorption onto the matrix without ligand and matrix with attached ligand were investigated batch-wise. The adsorption equilibrium isotherms appeared to follow a typical Langmuir isotherm. The maximum adsorption capacity (q(m)) of the Cell-Cibacron macroligand for lysozyme was 110 mg/ml of wet macroligand. The adsorbent was also employed for the separation of lysozyme from hen egg white. High purity lysozyme was obtained.     

Protein adsorption and hydrodynamic stability of a dense, pellicular adsorbent in high-biomass expanded bed chromatography

A dense, pellicular UpFront adsorbent (ϱ=1.5 g/cm³, UpFront Chromatography, Cophenhagen, Denmark) was characterized in terms of hydrodynamic properties and protein adsorption performance in expanded bed chromatography. Cibacron Blue 3GA was immobilised into the adsorbent and protein adsorption of bovine serum albumin (BSA) was selected to test the setup. The Bodenstein number and axial dispersion coefficient estimated for this dense pellicular adsorbent was 54 and 1.63×10⁻⁵ m²/s, respectively, indicating a stable expanded bed. It could be shown that the BSA protein was captured by the adsorbent in the presence of 30% (w/v) of whole-yeast cells with an estimated dynamic binding capacity (C/C ₀=0.01) of approximately 6.5 mg/mL adsorbent.     

The influence of bakers’ yeast cells on protein adsorption performance in dye-ligand expanded bed chromatography

The influence of whole yeast cells (0–15% w/v) on the protein adsorption performance in dye-ligand chromatography was explored. The adsorption of a model protein, bovine serum albumin (BSA), was selected to demonstrate this approach. The UpFront adsorbent (ρ=1.5 g/cm³) derivatised with Cibacron Blue 3GA and a commercially available expanded bed column (20 mm i.d.) from UpFront Chromatography, Denmark, were employed in the batch binding and expanded bed operation. The BSA binding capacity was demonstrated to not be adversely affected by the presence of yeast cells. The dynamic binding capacity of BSA at aC/C ₀=0..1 biomass concentration of 5, 10, 15% w/v were 9, 8, and 7.5 mg/mL of settled adsorbent, respectively.     

Immobilization of catalase via adsorption onto metal-chelated affinity cryogels

A poly (acrylamide-allylglycidyl ether) [p(AAm-AGE)] cryogel was prepared by radical polymerization of acrylamide (AAm) and allylglycidyl ether (AGE). Cibacron Blue F3GA (CB) was covalently attached to the p(AAm-AGE) cryogel via the reaction between the chloride groups of the reactive dyes and the epoxide groups of the AGE. The CB-attached p(AAm-AGE) cryogel was chelated with Fe³⁺ ions. This immobilized metal ion affinity chromatography (IMAC) cryogel carrying 25.8 ± 2.0 μmol Fe³⁺ ions was used in adsorption studies to interrogate the effects of pH, protein initial concentration, flow rate, temperature and ionic strength on enzyme activity. Maximum adsorption capacities were found to be 75.7 ± 1.2 mg/g for p(AAm-AGE)-CB-Fe³⁺ cryogels and 60.6 ± 1.0 mg/g for p(AAm-AGE)-CB cryogels, respectively. The adsorbed amounts of catalase per unit mass of cryogel reached a plateau value at about 1.5 mg/mL at pH 6.0. The K_m values were found to be 0.73 ± 0.02 g/L for the free catalase and 0.18 ± 0.02 g/L for the immobilized catalase. The V_max value of free catalase (2.0 × 10³ U/mg enzyme) was found to be lower than that of the immobilized catalase (2.5 × 10³ U/mg enzyme). It was also observed that the enzyme could be repeatedly adsorbed and desorbed onto the p(AAm-AGE)-CB-Fe³⁺ cryogel.     

Integration of mechanical cell disruption and fluidised bed recovery of G3PDH from unclarified disrupted yeast: a comparative study of the performance of unshielded and polymer shielded dye-ligand chromatography systems

The development of a simplified process for the simultaneous disruption and direct selective purification of intracellular proteins from unclarified yeast disruptate has been investigated. The recovery of glyceraldehyde 3-phosphate dehydrogenase (G3PDH) from baker's yeast was selected as a potential demonstration of the generic applicability and practical feasibility of this integrated technique. The application of an adsorbent characterised by high density (UpFront steel-agarose; rho=2.65g ml(-1)) facilitated the combining of cell disruption operation (bead milling of 50% ww/v of yeast suspension at 7.2 lh(-1)) with fluidised bed dye-ligand (Cibacron Blue 3GA) adsorption operated immediately downstream of the disrupter. The adoption of a polymer shielded, dye-ligand technique advanced recovery efficiency. It was demonstrated that G3PDH could be recovered with a yield of 67.5% bound activity and a specific activity of 40.2IU mg(-1), after a single step elution with 0.15M NaCl. The generic application of this approach has been evaluated.