Flow injection chemiluminescence determination of naphazoline hydrochloride in pharmaceuticals

A simple and sensitive flow injection chemiluminescence (FI‐CL) method was developed for the determination of naphazoline hydrochloride (NPZ). The method is based on the enhancing effect of NPZ on the weak CL signal from the reaction of KIO₄ with H₂O₂. Experimental parameters that affected the CL signal, including the pH of the KIO₄ solution, concentrations of KIO₄, H₂O₂ and disodium‐EDTA and flow rate were optimized. Under the optimum conditions, the increment of CL intensity was linearly proportional to the concentration of NPZ in the range 5.0 × 10^?6 to 70 × 10^?6 mol/L. The detection limit was 1.0 × 10^?6 mol/L and the relative standard deviation for 50 × 10^?6 mol/L NPZ solution was 2.8% (n = 11). In addition, a high throughput of 120 samples/h was achieved. The utility of this method was demonstrated by determining NPZ in pharmaceuticals. Copyright © 2013 John Wiley & Sons, Ltd.     

Chemiluminescence detection of trace iodide with flow injection analysis of KMnO4‐carbon dots system

Ultra‐weak chemiluminescence (CL) from the reaction of iodide and KMnO₄ was strongly enhanced by carbon nanodots (CNDs) in an acidic medium. The CL intensity was directly proportional to the concentration of iodide in the solution. Therefore, a flow‐injection CL system with high sensitivity, selectivity and reproducibility is proposed for the determination of iodide. The proposed method exhibited advantages over a linear range of 3.0 × 10^?6–1.0 × 10^?4 mol/L and had a detection limit of 3.5 × 10^?7 mol/L. The method was successfully applied to the evaluation of iodide in food samples with recoveries of between 96 and 103%. The relative standard deviations were 2.1 and 4.1% for intra‐ and inter‐assay precision, respectively.     

Exploring the electrochemiluminescent behavior of procaterol hydrochloride in the presence of Ru(bpy)32+ and its analytical application in pharmaceutical preparation

Based on the strong enhancement effect of procaterol hydrochloride on the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ (bpy = 2,2′‐bipyridine) in an alkaline H₃PO₄–NaOH buffer solution on a bare Pt electrode, a simple, rapid and sensitive method was developed for the determination of procaterol hydrochloride. The optimum conditions for the enhanced ECL have been developed in detail in this work. Under optimum conditions, the logarithmic ECL enhancement vs. the logarithmic concentration of procaterol hydrochloride is linear over a wide concentration range of 2.0 × 10^?7 to 2.0 × 10^?4 M (r =  0.9976), with a limit of detection of 1.1 × 10^?8 M (S/N =  3), and a relative standard deviation of 2.1% (n =  7, c =  5.0 × 10^?6 M). The proposed method was applied to the determination of this drug in tablets with recoveries of 89.7%–98.5%. In addition, a possible mechanism for the enhanced ECL of Ru(bpy)₃²⁺, which is caused by ProH, has also been proposed.     

Determination of oxytetracycline hydrochloride in milk and egg white samples using Ru(bipy)32+–Ce(SO4)2 chemiluminescence

A novel, rapid and sensitive chemiluminescence (CL) method for the determination of oxytetracycline hydrochloride (OTCH) is described in this paper. The presented method was based on the fact that OTCH could immensely enhance the CL of the reaction of cerium sulfate and tris(2,2‐bipyridyl) ruthenium (II) in acidic medium. Under optimal experimental conditions, CL intensity was favorably linear for OTCH in the range 5.0 × 10^?7 to 5.0 × 10^?5 g/ml, with a detection limit of 1.5 × 10^?7 g/ml (S/N = 3). The relative standard detection was 4.76% for 5.0 × 10^?6 g/ml (n = 11). This method was successfully applied to the analysis of OTCH in milk and egg white samples. According to the results of the kinetic curves for OTCH in the Ru(bipy)₃²⁺–Ce(SO₄)₂ CL system, together with CL and ultraviolet (UV)–visible spectra, the possible mechanism of the CL reaction is discussed briefly.     

A flow injection chemiluminescence method for the determination of lincomycin in serum using a diperiodato-cuprate (III)-luminol system

In this paper, the novel trivalent copper–periodate complex {K₅[Cu(HIO₆)₂], DPC} has been applied in a luminol‐based chemiluminescence (CL) reaction. Coupled with flow injection (FI) technology, the FI‐CL method was proposed for the determination of lincomycin hydrochloride. The CL reaction between luminol and DPC occurred in an alkaline medium. The CL intensity could be greatly enhanced by lincomycin hydrochloride. The relative CL intensity was proportional to the concentration of lincomycin hydrochloride in the range of 1 × 10^?8 to 5 × 10^?6 g mL^?1 and the detection limit was at the 3.5 × 10^?9 g mL^?1 level. The relative standard deviation at 5 × 10^?8 g mL^?1 was 1.7% (n = 9). The sensitive method was successfully applied to the direct determination of lincomycin hydrochloride (ng mL^?1) in serum. A possible mechanism of the lumonol–DPC CL reaction was discussed by the study of the CL kinetic characteristics and the spectra of CL reaction. The oxidability of DPC was studied by means of its electrochemical response. Copyright © 2010 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence determination of bromhexine hydrochloride with morin as chemiluminescent reagent

A new chemiluminescence (CL) reaction was observed when cerium(IV) solution was injected into bromhexine hydrochloride–morin solution. Based on this, a flow‐injection CL method for the determination of bromhexine hydrochloride was established. A possible mechanism of the CL reaction was proposed via the investigation of the CL kinetic characteristics, the CL spectrum and the fluorescence spectra of some related substances. Under optimum conditions, the CL signal was correlated linearly with concentration of bromhexine hydrochloride over the range 2.0 × 10^–9–2.0 × 10^–7 g/mL, with a linear correlation of 0.9995. The detection limit was 9 × 10^–10 g/mL bromhexine hydrochloride and the relative standard deviation was 1.0% (c = 2.0 × 10^–8 g/mL bromhexine hydrochloride, n = 11). The method was applied to the determination of bromhexine hydrochloride in pharmaceutical preparations and human urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of naphazoline hydrochloride in biological and pharmaceutical samples by a quantum dot‐assisted chemiluminescence system using response‐surface methodology

A simple and highly sensitive chemiluminescence (CL) method is reported for the determination of naphazoline hydrochloride (NH). It was found that the weak CL from the reaction of luminol and KIO₄ in an alkaline medium could be highly amplified by cysteine‐capped cadmium telluride quantum dots (QDs) and the enhanced CL was effectively quenched by NH and this finding was utilized as a basis for the determination of NH. The QDs were synthesized in aqueous medium and characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐vis and photoluminescence spectroscopy. A possible mechanism was proposed for the CL system based on radical identification experiments, along with CL spectrum of the system. The experimental parameters were optimized by the reliable response surface methodology (RSM). Under the optimized experimental conditions, the proposed method allowed the determination of NH over the range of 5.0 × 10^‐10–2.0 × 10^‐7 mol/L (r² = 0.9993, n = 10). The precision (RSD%) of the method, obtained from five replicate determinations of 2.0 and 150 nmol/L NH, was found to be 1.0% and 1.3%, respectively. The method was successfully applied to the determination of NH in pharmaceutical formulations and human urine and serum samples with results corroborated with the aid of those obtained from a standard method. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of dobutamine hydrochloride by enzymatic catalytic spectrofluorimetry

A highly sensitive and simple spectrofluorimetric method for the determination of dobutamine hydrochloride based on its inhibitory effect on the hemoglobin‐catalyzed reaction of H₂O₂ and l ‐tyrosine was developed. The relationship between the concentration of dobutamine hydrochloride and the fluorescence quenching (ΔF) of the system is linear under the optimal experimental conditions. The calibration graph is linear in the range 2.00 × 10^‐7 to 3.00 × 10^‐6 g/mL with a limit of detection of 4.83 × 10^‐9 g/mL. This method can be used for the determination of dobutamine hydrochloride in its pharmaceutical formulations and in urine with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Multiway analysis applied to time‐resolved chemiluminescence for simultaneous determination of paracetamol and codeine in pharmaceuticals

This method is based on the enhancing effect of codeine (COD) and paracetamol (PAR) on the chemiluminescence (CL) reaction of Ru(phen)₃²⁺ with Ce(IV). In the batch mode, COD gives a relatively sharp peak with the highest CL intensity at 4.0 s, whereas the maximum CL intensity of the PAR appears at ~60 s after injection of Ce(IV) solution. Whole CL time profiles allowed use of the time‐resolved CL data in combination with multiway calibration techniques, as multiway partial least squares (N‐PLS), for the quantitative determination of both COD and PAR in binary mixtures. In this work, we found that the impact of Ce(IV) concentration on the CL intensity was different for COD and PAR. Therefore, a Ce(IV) concentration mode was added to the time and sample modes to obtain 3D data. The percent relative standard deviation (%RSD) values for 10 determinations of 1.0 × 10^?5 mol/L of COD and 1.0 × 10^?4 mol/L of PAR were 6.1% and 8.7%, respectively. The limit of detection (LOD) values (S/N = 3) were 0.9 × 10^?8 mol/L and 1.0 × 10^?6 mol/L for COD and PAR, respectively. The proposed method was successfully applied to the determination of PAR and COD in commercial pharmaceutical formulations. Acceptable recoveries (90–110%) were obtained for the quantification of these drugs in the real samples. Copyright © 2016 John Wiley & Sons, Ltd.     

The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Copper nanocluster‐enhanced luminol chemiluminescence for high‐selectivity sensing of tryptophan and phenylalanine

A remarkable method for the highly sensitive detection of phenylalanine and tryptophan based on a chemiluminescence (CL) assay was reported. It was found that fluorescent copper nanoclusters capped with cysteine (Cys‐CuNCs) strongly enhance the weak CL signal resulting from the reaction between luminol and H₂O₂. Of the amino acids tested, phenylalanine and tryptophan could enhance the above CL system sensitively. Under optimum conditions, this method was satisfactorily described by a linear calibration curve over a range of 1.0 × 10^?6 to 2.7 × 10^?5 M for phenylalanine and 1.0 × 10^?7 to 3.0 × 10^?5 M for tryptophan, respectively. The effect of various parameters such as Cys‐CuNC concentration, H₂O₂ concentration and pH on the intensity of the CL system were also studied. The main experimental advantage of the proposed method was its selectivity for two amino acids compared with others. To evaluate the applicability of the method to the analysis of a real biological sample it was used to determine tryptophan and phenylalanine in human serum and remarkable results were obtained.     

FeS2 nanosheets–luminol–O2 chemiluminescence method for determination of venlafaxine hydrochloride,imipramine hydrochloride,and cefazolin sodium

This study introduces a novel chemiluminescence (CL) approach utilizing FeS₂ nanosheets (NSs) catalyzed luminol–O₂ CL reaction for the measurement of three pharmaceuticals, namely venlafaxine hydrochloride (VFX), imipramine hydrochloride (IPM), and cefazolin sodium (CEF). The CL method involved the phenomenon of quenching induced by the pharmaceuticals in the CL reaction. To achieve the most quenching efficacy of the pharmaceuticals in the CL reaction, the concentrations of reactants comprising luminol, NaOH, and FeS₂ NSs were optimized accordingly. The calibration curves demonstrated exceptional linearity within the concentration range spanning from 4.00 × 10⁻⁷ to 1.00 × 10⁻³ mol L⁻¹, 1.00 × 10⁻⁷ to 1.00 × 10⁻⁴ mol L⁻¹, and 4.00 × 10⁻⁶ to 2.00 × 10⁻⁴ mol L⁻¹ with detection limits (3σ) of 3.54 × 10⁻⁷, 1.08 × 10⁻⁸, and 2.63 × 10⁻⁶ mol L⁻¹ for VFX, IPM, and CEF, respectively. This study synthesized FeS₂ NSs using a facile hydrothermal approach, and then the synthesized FeS₂ NSs were subjected to a comprehensive characterization using a range of spectroscopic methods. The proposed CL method was effective in measuring the aforementioned pharmaceuticals in pharmaceutical formulations as well as different water samples. The mechanism of the CL system has been elucidated.     

Chemiluminescence determination of naproxen based on europium(III)‐sensitized KIO4–H2O2 reaction

A simple and sensitive chemiluminescence (CL) method combined with flow injection technique was developed for the determination of naproxen. It was based upon the weak CL signal arising from the reaction of KIO₄ with H₂O₂ being significantly increased by naproxen in the presence of europium(III) ion. The experimental conditions that affected the CL signal were carefully optimized and the CL reaction mechanism was briefly discussed. Under the optimum conditions, the increment of CL intensity was proportional to the concentration of naproxen ranging from 5.0 × 10^?8 to 5.0 × 10^?6 g/mL. The detection limit was 1 × 10^?8 g/mL naproxen and the relative standard deviation for 5.0 × 10^?7 g/mL naproxen solution was 2.1% (n = 11). The proposed method was applied to the determination of naproxen in tablets and in spiked human urine samples with satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence of copper nanoclusters and its application for trihexyphenidyl hydrochloride detection

Chemiluminescence (CL) of copper nanoclusters (CuNCs) induced by cerium (IV) (Ce(IV)) or potassium permanganate (KMnO₄) in acidic medium was observed. The potential application of CuNCs CL in analytical chemistry was also demonstrated using trihexyphenidyl hydrochloride (THP) as an example based on its enhancing CL intensity for the CuNCs–Ce(IV)/KMnO₄ systems. The excited state of the CuNCs acted as a luminophore in the CuNCs–Ce(IV) system, while CuNCs played the role of reductant in the CuNCs–KMnO₄ system. The increased CL intensity for Ce(IV)–CuNCs system was proportional to the THP concentrations in the range of 0.1 to 10.0 μM. The detection limit was 49.0 nM and the relative standard deviation was 2.2% for 2.0 μM THP (n = 11). The proposed method was applied to detect THP in pharmaceutical formulations and human plasma samples.     

New luminol chemiluminescence reaction using diperiodatoargentate as oxidate for the determination of amikacin sulfate

A new chemiluminescence (CL) reaction between luminol and diperiodatoargentate {K₂ [Ag (H₂IO₆) (OH) ₂]} was observed in alkaline medium. The CL intensity could be greatly enhanced by amikacin sulfate. Therefore a new CL method for the determination of amikacin sulfate was built by combining with flow injection technology. A possible mechanism of the CL reaction was proposed via the investigation of the CL kinetic characteristics, the CL spectrum and the UV absorption spectra of some related substance. The concentration range of linear response was 5.1 × 10^?8 to 5.1 × 10^?6 mol L^?1 with a detection limit of 1.9 × 10^?8 mol L^?1 (3σ). The proposed method had good reproducibility with a relative standard deviation of 2.8% (n = 7) for 5.1 × 10^?7 mol L^?1 of amikacin sulfate. It was successfully applied to determine amikacin sulfate in serum. Copyright © 2009 John Wiley & Sons, Ltd.     

Perturbation of the tris(2,2′‐bipyridine) ruthenium(II)‐catalyzed Belousov–Zhabotinsky oscillating chemiluminescence reaction by l‐cysteine and its application

Perturbation of the tris(2,2′‐bipyridine)ruthenium(II) [Ru(bpy)₃²⁺]‐catalyzed Belousov–Zhabotinsky (BZ) oscillating chemiluminescence (CL) reaction induced by l ‐cysteine was observed in the closed system. It was found that the CL intensity was decreased in the presence of l ‐cysteine. Meanwhile, oscillation period and oscillating induction period were prolonged. The sufficient reproducible induction period was used as parameter for the analytical application of oscillating CL reaction. Under the optimum conditions, the changes in the oscillating CL induction period were linearly proportional to the concentration of l ‐cysteine in the range from 8.0 × 10^?7 to 5.0 × 10^?5 mol L^?1 (r = 0.997) with a detection limit of 4.3 × 10^?7 mol L^?1. The possible mechanism of l ‐cysteine perturbation on the oscillating CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of a sensitive flow‐injection–chemiluminescence detection method for the determination of laevodopa

A simple chemiluminometric method using flow injection has been developed for the determination of laevodopa, based on its sensitizing effect on the weak chemiluminescence (CL) reaction between Na₂SO₃ and acidic KMnO₄. Under optimum experimental conditions, the CL intensity was linearly related to the concentration of laevodopa from 3.4 × 10^–8 to 2.4 × 10^–5 mol/L and the detection limit was 1.1 × 10^–8 mol/L (s:n = 3). The relative standard deviation (RSD) of the proposed method calculated from 20 replicate injection of 3 × 10^–7 mol/L laevodopa was 3.3%. The correlation coefficient was 0.997. The method was successfully applied to the determination of laevodopa in commercial pharmaceutical formulations and spiked urine samples. Copyright © 2008 John Wiley & Sons, Ltd.     

A new spectrofluorimetric method for the determination of some tetracyclines based on their interfering effect on resonance fluorescence energy transfer

A rapid, simple, inexpensive and highly sensitive spectrofluorimetric method was developed for the determination of trace amounts of some tetracyclines (TCs), namely tetracycline hydrochloride (TCH), oxytetracycline hydrochloride (OTCH) and minocycline hydrochloride (MCH). Binding rhodamine B (RhB) to gold nanoparticles (Au NPs) resulted in quenching of the fluorescence of RhB by a resonance energy transfer (FRET) mechanism, with Au NPs as the energy acceptors. The presence of TCs caused the release of RhB molecules and recovered their fluorescence, and this was used as a basis for the quantitative determination of TCs. The reaction was monitored spectrofluorimetrically by measuring the increase in fluorescence of RhB at 572 nm starting 5 min after mixing the reagents in Tris buffer solution (pH 6.5). The effect of various experimental factors such as buffer type, pH, concentrations of the involved reagents and reaction time were studied to optimize the reaction conditions. Under optimum conditions, the calibration graphs were linear within the ranges 2.08 × 10^?9–1.04 × 10^?6 mol/L, 2.01 × 10^?9–1.00 × 10^?6 mol/L and 2.02 × 10^?9–1.01 × 10^?6 mol/L and detection limits (LODs) of 0.61 × 10^?9, 0.32 × 10^?9 and 0.66 × 10^?9 mol/L were calculated for TCH, OTCH and MCH, respectively, with corresponding percent relative standard deviations (%RSDs) of 1.18, 1.21 and 1.54 (n = 5). The method was successfully applied to the determination of TCs in drinking water, human urine, bovine milk and breast milk samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive determination of epinephrine in pharmaceutical preparation by flow injection coupled with chemiluminescence detection and mechanism study

A novel, rapid and sensitive method was described for the determination of epinephrine (EP) using flow injection analysis coupled with chemiluminescence (CL) detection, which based on EP enhanced the weak CL emission of luminol–KIO₄ system in NaOH solution. Parameters affecting the CL intensity and reproducibility were optimized systematically. Under the optimized experiment conditions, the net CL intensity was proportional to the concentration of EP in the range of 5.0 × 10^?8 to 1.5 × 10^?6 mol/L with a detection limit of 1.9 × 10^?9 mol/L. The relative standard deviation (RSD) was found to be 0.7% for 13 replicate determinations of 3.0 × 10^?7 mol/L EP. The applicability of the proposed method was illustrated in the determination of EP in pharmaceutical preparation. The recoveries of EP at different levels in EP hydrochloride injection were between 95.4 and 104.7%. One assay procedure takes only 27 s, and the sampling rate was calculated about to be 130 samples/h. The possible mechanism of the enhanced CL intensity was studied by examining CL spectra and UV–vis spectra. Copyright © 2009 John Wiley & Sons, Ltd.