Application of immobilized horseradish peroxidase onto modified acrylonitrile copolymer membrane in removing of phenol from water

A non-modified and modified with NaOH and ethylenediamine ultrafiltration membranes prepared from AN copolymer have been used as carriers for the immobilization of horseradish peroxidase (HRP) enzyme. The amount of bound protein onto the membranes and the activity of the immobilized enzyme have been investigated as well as the pH and thermal optimum, and the thermal stability of the free and immobilized HRP. The experiments have proved that the modified membrane is a better support for the immobilization of HRP enzyme. The latter has shown a greater thermal stability than the free enzyme.A possible application has been studied for reducing phenol concentration in water solutions through oxidation of phenol by hydrogen peroxide, in the presence of free and immobilized HRP enzyme on modified AN copolymer membranes. A higher degree of the phenol oxidation has been observed in the presence of the immobilized enzyme. A total removal of phenol has been achieved in the presence of immobilized HRP at concentration of the hydrogen peroxide 0.5 mmol L^?1 and concentration of the phenol in the model solutions within the interval 5–40 mg L^?1. A high degree of phenol oxidation (95.4%) has been achieved in phenol solution with 100 mg L^?1 concentration in the presence of hydrogen peroxide and immobilized HRP, which demonstrates the promising opportunity of using the enzyme for bioremediation of waste waters, containing phenol.The immobilized HRP has shown good operational stability. Deactivation of the immobilized enzyme to 50% of the initial activity has been observed after the 20th day of the enzyme operation.     

Immobilization of horseradish peroxidase on activated wool

This work is aimed to immobilize partially purified horseradish peroxidase (HRP) on wool activated by multifunctional reactive center, namely cyanuric chloride. The effect of cyanuric chloride concentration, pH and enzyme concentration on immobilization of HRP was studied. FT-IR and SEM analyses were detected for wool, activated wool and immobilized wool-HRP. The wool-HRP, prepared at 2% (w/v) cyanuric chloride and pH 5.0, retained 50% of initial activity after seven reuses. The wool-HRP showed broad optimum pH at 7.0 and 8.0, which was higher than that of the soluble HRP (pH 6.0). The soluble HRP had an optimum temperature of 30 °C, which was shifted to 40 °C for immobilized enzyme. The soluble and wool-HRP were stable up to 30 and 40 °C after incubation for 1 h, respectively. The apparent kinetic constant values (K_ms) of wool-HRP were 10 mM for guiacol and 2.5 mM for H₂O₂, which were higher than that of soluble HRP. The wool-HRP was remarkably more stable against proteolysis mediated by trypsin. The wool-HRP exhibited more resistance to heavy metal induced inhibition. The wool-HRP was more stable to the denaturation induced by urea, Triton X-100, isopropanol, butanol and dioxan. The wool-HRP was found to be the most stable under storage. In conclusion, the wool-HRP could be more suitable for several industrial and environmental purposes.     

A carbon nanotube/silica sol–gel architecture for immobilization of horseradish peroxidase for electrochemical biosensor

A novel third-generation biosensor for hydrogen peroxide (H₂O₂) has been constructed based on horseradish peroxidase (HRP) immobilized by the sol–gel (SG) technology on carbon nanotube (CNT)-modified electrode. CNT has good promotion effects on the direct electron transfer between HRP and the electrode surface and the SG network provides a biocompatible microenvironment for enzyme. The immobilized HRP retained its bioelectrocatalytic activity for the reduction of hydrogen peroxide and can respond to the change of concentration of H₂O₂ rapidly. The heterogeneous electron transfer rate constant was evaluated to be 2.8 ± 0.4 s⁻¹. The amperometric response to H₂O₂ shows a linear relation in the range from 0.5 to 300 μmol l⁻¹ and a detection limit of 0.1 μmol l⁻¹ (S/N = 3). The K _M^app value of HRP immobilized on the electrode surface was found to be 1.35 mmol l⁻¹. The biosensor exhibited high sensitivity, rapid response and excellent long-term stability.     

Immobilization of horseradish peroxidase onto kaolin

Kaolin showed as a very perspective carrier for the enzyme immobilization and it was used for the adsorption of horseradish peroxidase (HRP). The effects of the enzyme concentration and pH on the immobilization efficiency were studied in the reaction with pyrogallol and anthraquinone dye C.I. Acid Violet 109 (AV 109). In addition, Fourier transform infrared spectroscopy, scanning electron microscopy and analysis by Brunauer–Emmett–Teller were performed for kaolin, thermally activated kaolin and the immobilized enzyme. It has been shown that 0.1 IU of HRP-kaolin decolorized 87 % of dye solution, under the optimal conditions (pH 5.0, temperature 24 °C, dye concentration 40 mg/L and 0.2 mM of H₂O₂) within 40 min. The immobilized HRP decolorization follows the Ping Pong Bi–Bi mechanism with dead-end inhibition by the dye. The biocatalyst retained 35 ± 0.9 % of the initial activity after seven cycles of reuse in the decolorization reaction of AV 109 under optimal conditions in a batch reactor. The obtained kinetic parameters and reusability study confirmed improvement in performances of k-HRP compared to free, indicating that k-HRP has a great potential for environmental purposes.     

Immobilization of Horseradish Peroxidase on Multi-Wall Carbon Nanotubes and its Electrochemical Properties

Horseradish peroxidase (HRP) was immobilized on carboxylated multi-wall carbon nanotubes in the presence of a coupling reagent, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The immobilized HRP maintained its oxidative activity for guaiacol over a broad range of pH values (4–9). An electrode of graphite rod, 6 mm diam. was fabricated using the immobilized HRP. Cyclic voltammetry of the enzyme electrode confirmed electron transfer between the immobilized HRP and the electrode in the presence of H₂O₂ but without an added mediator or a reducing substrate.     

Stabilization of d-amino acid oxidase from Rhodosporidium toruloides by immobilization onto magnetic nanoparticles

d-Amino acid oxidase from Rhodosporidium toruloides was immobilized onto glutaraldehyde-activated magnetic nanoparticles. Approximately four enzyme molecules were attached to one magnetic nanoparticle when the weight ratio of the enzyme to the support was 0.12. After immobilization, the T _m was increased from 45°C of the free form to 55°C. In the presence of 20 mM H₂O₂, the immobilized form retained 93% of its activity after 5 h while the free form was completely inactivated after 3.5 h.     

The role of Arginine 38 in horseradish peroxidase enzyme revisited: A computational investigation

Molecular dynamics simulations on hydrogen peroxide complex with wild-type (WT) and Arg38Leu mutated (R38L) Horseradish Peroxidase (HRP) were carried out over nanoseconds timescale in water solution at 300 K. Comparison of the results provides interesting insights about the role of highly conserved Arg38 and His42 residues in the chemical features of HRP, underlying its biological activity which initiates with Compound0 (Cpd0). In the WT-HRP enzyme current molecular dynamics simulations show, for the first time, that Arg38 residue: i) prevents the entrance of water inside the reaction cavity, hence providing a hydrophobic reactive scenario, ii) it maintains the distance between His42 and heme–H₂O₂ complex suitable for the occurrence of proton transfer reaction leading, thereafter, to heme–H₂O₂ disruption according to Poulos-Kraut mechanism. On the other hand, R38L mutant can be considered as a “wet enzyme” where the presence of water solvent molecules in the heme reaction pocket, unfavoring the initial heme–H₂O₂ complex formation, decreases the catalytic efficiency in agreement with experimental kinetics measurements. Furthermore, we note that Arg38Leu mutation pushes the His42 residue far from the heme–H₂O₂ complex, making unlikely a direct proton transfer and suggesting that, in the mutant, a solvent water molecule could be involved in the first step of the Poulos-Kraut mechanism.     

Immobilization of α-galactosidase on galactose-containing polymeric beads

Industrial application of α-galactosidase requires efficient methods to immobilize the enzyme, yielding a biocatalyst with high activity and stability compared to free enzyme. An α-galactosidase from tomato fruit was immobilized on galactose-containing polymeric beads. The immobilized enzyme exhibited an activity of 0.62 U/g of support and activity yield of 46%. The optimum pH and temperature for the activity of both free and immobilized enzymes were found as pH 4.0 and 37 °C, respectively. Immobilized α-galactosidase was more stable than free enzyme in the range of pH 4.0–6.0 and more than 85% of the initial activity was recovered. The decrease in reaction rate of the immobilized enzyme at temperatures above 37 °C was much slower than that of the free counterpart. The immobilized enzyme shows 53% activity at 60 °C while free enzyme decreases 33% at the same temperature. The immobilized enzyme retained 50% of its initial activity after 17 cycles of reuse at 37 °C. Under same storage conditions, the free enzyme lost about 71% of its initial activity over a period of 7 months, whereas the immobilized enzyme lost about only 47% of its initial activity over the same period. Operational stability of the immobilized enzyme was also studied and the operational half-life (t_1/2 was determined as 6.72 h for p-nitrophenyl α-d-galactopyranoside (PNPG) as substrate. The kinetic parameters were determined by using PNPG as substrate. The K_m and V_max values were measured as 1.07 mM and 0.01 U/mg for free enzyme and 0.89 mM and 0.1 U/mg for immobilized enzyme, respectively. The synthesis of the galactose-containing polymeric beads and the enzyme immobilization procedure are very simple and also easy to carry out.     

Studies on Horseradish Peroxidase Immobilized onto Arylamine and Alkylamine Glass

Peroxidase from horseradish has been immobilized onto zirconia coated arylamine and alkylamine glass through the process of diazotization and glutaraldehyde coupling, respectively. Arylamine glass bound enzyme retained 77% of the initial activity with a conjugation yield of 18 mg g^-1 support, while alkylamine glass bound enzyme retained 38% of the initial activity with a conjugation yield of 16 mg g^-1 support. The immobilized enzyme showed an increase in optimum pH, temperature for maximum activity, energy of activation (Ea), and thermal stability but decrease in time for linearity and Km for H₂O₂. Vmax value of arylamlne conjugated enzyme decreased but Vmax of alkylamine conjugated enzyme was unaltered compared to free enzyme. Both arylamine and alkylamine bound enzyme showed higher stability in cold compared to that of free enzyme. The application of glass bound peroxidase in discrete analysis of serum urate is demonstrated.     

Electrospun polyvinyl alcohol/bovine serum albumin biocomposite membranes for horseradish peroxidase immobilization

Electrospinning, a simple and versatile method to fabricate nanofibrous supports, has attracted attention in the field of enzyme immobilization. Biocomposite nanofibers were fabricated from mixed PVA/BSA solution and the effects of glutaraldehyde treatment, initial BSA concentration and PVA concentration on protein loading were investigated. Glutaraldehyde cross-linking significantly decreased protein release from nanofibers and BSA loading reached as high as 27.3% (w/w). In comparison with the HRP immobilized into the nascent nanofibrous membrane, a significant increase was observed in the activity retention of the enzyme immobilized into the PVA/BSA biocomposite nanofibers. The immobilized HRP was able to tolerate much higher concentrations of hydrogen peroxide than the free enzyme and thus the immobilized enzyme did not demonstrate substrate inhibition. The immobilized HRP retained ⿼50% of the free enzyme activity at 6.4 mM hydrogen peroxide and no significant variation was observed in the KM value of the enzyme for hydrogen peroxide after immobilization. In addition, reusability tests showed that the residual activity of the immobilized HRP were 73% after 11 reuse cycles. Together, these results demonstrate efficient immobilization of HRP into electrospun PVA/BSA biocomposite nanofibers and provide a promising immobilization strategy for biotechnological applications.     

Chemiluminescent assay of β-D-galactosidase based on indole luminescence

We developed a novel chemiluminescent assay of β-D -galactosidase (β-gal) based on the chemiluminescence of indole. 5-Bromo-4-chloro-3-indolyl-β-D -galactopyranoside (X-gal) was used as a substrate for β-gal and also as a light emitter. X-gal was hydrolysed by β-gal to liberate free indoxyl, followed by oxidation to indigo dye, and simultaneously produces hydrogen peroxide (H₂O₂). H₂O₂ reacts with the residual X-gal in the presence of horseradish peroxidase (HRP) to emit light. The measurable range of β-gal obtained by this method was 6 × 10⁻¹⁴ mol/L to 6 × 10⁻¹¹ mol/L; the detection limit was 3 amol/assay. This chemiluminescent assay could be applied to an enzyme immunoassay of thyroxine using β-gal as the enzyme label. © 1998 John Wiley & Sons, Ltd.     

Immobilization of glucose oxidase on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> magnetic nanoparticles

Glucose oxidase (GOD) was covalently immobilized onto Fe₃O₄/SiO₂ magnetic nanoparticles (FSMNs) using glutaraldehyde (GA). Optimal immobilization was at pH 6 with 3-aminopropyltriethoxysilane at 2% (v/v), GA at 3% (v/v) and 0.143 g GOD per g carrier. The activity of immobilized GOD was 4,570 U/g at pH 7 and 50°C. The immobilized GOD retained 80% of its initial activity after 6 h at 45°C while free enzyme retained only 20% activity. The immobilized GOD maintained 60% of its initial activity after 6 cycles of repeated use and retained 75% of its initial activity after 1 month at 4°C whereas free enzymes retained 62% of its activity.     

IMMOBILIZATION OF BOVINE CATALASE ONTO MAGNETIC NANOPARTICLES

The scope of this study is to achieve carrier-bound immobilization of catalase onto magnetic particles (Fe₃O₄ and Fe₂O₃NiO₂ · H₂O) to specify the optimum conditions of immobilization. Removal of H₂O₂ and the properties of immobilized sets were also investigated. To that end, adsorption and then cross-linking methods onto magnetic particles were performed. The optimum immobilization conditions were found for catalase: immobilization time (15 min for Fe₃O₄; 10 min for Fe₂O₃NiO₂ · H₂O), the initial enzyme concentration (1 mg/mL), amount of magnetic particles (25 mg), and glutaraldehyde concentration (3%). The activity reaction conditions (optimum temperature, optimum pH, pH stability, thermal stability, operational stability, and reusability) were characterized. Also kinetic parameters were calculated by Lineweaver–Burk plots. The optimum pH values were found to be 7.0, 7.0, and 8.0 for free enzyme, Fe₃O₄-immobilized catalases, and Fe₂O₃NiO₂ · H₂O-immobilized catalases, respectively. All immobilized catalase systems displayed the optimum temperature between 25 and 35°C. Reusability studies showed that Fe₃O₄-immobilized catalase can be used 11 times with 50% loss in original activity, while Fe₂O₃NiO₂ · H₂O-immobilized catalase lost 67% of activity after the same number of uses. Furthermore, immobilized catalase systems exhibited improved thermal and pH stability. The results transparently indicate that it is possible to have binding between enzyme and magnetic nanoparticles.     

Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

Nitroxides protect horseradish peroxidase from H2O2-induced inactivation and modulate its catalase-like activity

BackgroundHorseradish peroxidase (HRP) catalyzes H₂O₂ dismutation while undergoing heme inactivation. The mechanism underlying this process has not been fully elucidated. The effects of nitroxides, which protect metmyoglobin and methemoglobin against H₂O₂-induced inactivation, have been investigated.MethodsHRP reaction with H₂O₂ was studied by following H₂O₂ depletion, O₂ evolution and heme spectral changes. Nitroxide concentration was followed by EPR spectroscopy, and its reactions with the oxidized heme species were studied using stopped-flow.ResultsNitroxide protects HRP against H₂O₂-induced inactivation. The rate of H₂O₂ dismutation in the presence of nitroxide obeys zero-order kinetics and increases as [nitroxide] increases. Nitroxide acts catalytically since its oxidized form is readily reduced to the nitroxide mainly by H₂O₂. The nitroxide efficacy follows the order 2,2,6,6-tetramethyl-piperidine-N-oxyl (TPO) > 4-OH-TPO > 3-carbamoyl proxyl > 4-oxo-TPO, which correlates with the order of the rate constants of nitroxide reactions with compounds I, II, and III.ConclusionsNitroxide catalytically protects HRP against inactivation induced by H₂O₂ while modulating its catalase-like activity. The protective role of nitroxide at μM concentrations is attributed to its efficient oxidation by P940, which is the precursor of the inactivated form P670. Modeling the dismutation kinetics in the presence of nitroxide adequately fits the experimental data. In the absence of nitroxide the simulation fits the observed kinetics only if it does not include the formation of a Michaelis-Menten complex.General SignificanceNitroxides catalytically protect heme proteins against inactivation induced by H₂O₂ revealing an additional role played by nitroxide antioxidants in vivo.     

Preparation and characterization of epoxy-functionalized magnetic chitosan beads: laccase immobilized for degradation of reactive dyes

Cross-linked magnetic chitosan beads were prepared by phase-inversion technique in the presence of epichlorohydrin under alkaline condition, and used for covalent immobilization of laccase. The activity of the immobilized laccase on the magnetic chitosan was about 260 U (g/dry beads) with an enzyme loading of about 16.33 ± 0.39 mg [(g/dry beads) mg/g]. Kinetic parameters, V _max and K _m values were determined as 21.7 U/mg protein and 9.4 μM for free enzyme, and 15.6 U/mg protein and 19.7 μM for the immobilized laccase, respectively. The operational and thermal stabilities of the immobilized laccase were improved compared to free counterpart. The immobilized laccase was operated in a batch reactor for the decolorization of reactive dyes from aqueous solution. The laccase immobilized on magnetic chitosan beads was very effective for removal of textile dyes from aqueous solution which creates an important environmental problem in the discharged textile dying solutions.     

Determination of horserdish peroxidase concentration using the chemiluminescence of Cypridina luciferin analogue, 2 methyl-6-(p-methyoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin-3-one

The chemiluminescence of the Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin-3-one (MCLA) was observed at 462nm in the presence of horseradish peroxidase (HRP) and the total spectrum of light emitted was found to depend linearly on HRP concentration. Methods for the determination of HRP concentration using the chemiluminescence was investigated. HRP could be detected in the range from 100 pmol/L to 100nmol/L under the optimum condition, H₂O₂ (10mmol/L) and MCLA (10μmol/L) at pH 5.8.     

Enzyme immunosensor. III. Amperometric determination of human chorionic gonadotropin by membrane-bound antibody.

An enzyme immunosensor was constructed for the determination of human chorionic gonadotropin (HCG), which is a hormone and an important diagnostic measure of pregnancy. An antibody to HCG was immobilized to a membrane. The antibody-bound membrane was placed onto an oxygen probe so as to react with HCG either specifically or selectively. Catalase, which catalyzes the decomposition of H₂O₂ into H₂O and O₂, was used to label HCG. Nonlabeled HCG to be assayed and catalase-labeled HCG were competitively reacted with the membrane-bound antibody of the sensor to form an antigen-antibody complex on the membrane surface. After the removal of nonspecifically adsorbed HCG, the sensor was contacted with a H₂O₂ solution. The membrane-adsorbed catalase enzymatically generated oxygen with a resulting increase in cathodic current of the sensor. The HCG concentration was determined from the initial rate of the current increase. The enzyme immunosensor was applied to the determination of HCG in the concentration range of 2 × 10^?2 to 10² IU/ml.     

Determination of free cholesterol based on a novel flow‐injection chemiluminescence method by immobilizing enzyme

A novel flow injection chemiluminescence method is proposed for determination of cholesterol in this paper. The cholesterol oxidase was immobilized onto sol–gel and prepared as an enzymatic reaction column. The determination of cholesterol was performed by quantitative determination of hydrogen peroxide produced from an enzymatic reaction. The luminol–H₂O₂–metal chelate diperiodatocuprate(III) system ensured that the method was highly sensitive and selective. Free cholesterol was determined over the range 5.0 × 10^–8 mol/L–5.0 × 10^–7 mol/L, with a limit of detection (3σ) of 1.9 × 10^–8 mol/L. The relative standard deviation (RSD) for 2.5 × 10^–7 mol/L was 2.7% (n = 7). The proposed method offered the advantages of sensitivity, selectivity, simplicity and rapidity for free cholesterol determination, and was successfully applied to the direct determination of free cholesterol in serum. Copyright © 2008 John Wiley & Sons, Ltd.     

Reversible immobilization of uricase on conductive polyaniline brushes grafted on polyacrylonitrile film

Polyacrylonitrile film (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The conductive films were used for immobilization of uricase. The surface resistance of the conductive film in this work was found to be 0.97 kΩ/cm. The maximum amount of immobilized enzyme on conductive film containing 2.4% PANI was about 216 μg/cm². The optimum pH for free and immobilized enzymes was observed at 7.0 and 7.5, respectively. The K _m values for free and immobilized uricase were found to be 94 and 138 μM, respectively. V _max values were calculated as 1.87 and 1.63 U/mg protein for the free and immobilized enzymes, respectively. Immobilized uricase exhibited ~68% of its original activity even after 2 months of storage at 4 °C while the free enzyme lost its initial activity within 4 weeks.