Numerical simulation of fluid field and in vitro three-dimensional fabrication of tissue-engineered bones in a rotating bioreactor and in vivo implantation for repairing segmental bone defects

In this paper, two-dimensional flow field simulation was conducted to determine shear stresses and velocity profiles for bone tissue engineering in a rotating wall vessel bioreactor (RWVB). In addition, in vitro three-dimensional fabrication of tissue-engineered bones was carried out in optimized bioreactor conditions, and in vivo implantation using fabricated bones was performed for segmental bone defects of Zelanian rabbits. The distribution of dynamic pressure, total pressure, shear stress, and velocity within the culture chamber was calculated for different scaffold locations. According to the simulation results, the dynamic pressure, velocity, and shear stress around the surface of cell-scaffold construction periodically changed at different locations of the RWVB, which could result in periodical stress stimulation for fabricated tissue constructs. However, overall shear stresses were relatively low, and the fluid velocities were uniform in the bioreactor. Our in vitro experiments showed that the number of cells cultured in the RWVB was five times higher than those cultured in a T-flask. The tissue-engineered bones grew very well in the RWVB. This study demonstrates that stress stimulation in an RWVB can be beneficial for cell/bio-derived bone constructs fabricated in an RWVB, with an application for repairing segmental bone defects.     

Ex vivo gene therapy in autologous critical-size craniofacial bone regeneration

In therapeutic bone repairs, autologous bone grafts, conventional or vascularized allografts, and biocompatible artificial bone substitutes all have their shortcomings. The bone formed from peptides [recombinant human bone morphogenetic proteins (BMPs)], demineralized bone powder, or a combination of both is small in size. Tissue engineering may be an alternative for cranial bone repair. In this study, the authors developed an animal model to test the hypothesis that replication-defective, adenovirus-mediated human BMP-2 gene transfer to bone marrow stromal cells enhances the autologous bone formation for repairing a critical-size craniofacial defect. The mesenchymal stromal cells of miniature swine were separated from the iliac crest aspirate and expanded in monolayer culture 1 month before implantation. The cultured mesenchymal stromal cells were infected with recombinant, replication-defective human adenovirus BMP-2, 7 days before implantation. Bilateral 2 x 5-cm2 cranial defects were created, leaving no osteogenic periosteum and dura behind. Mesenchymal stromal cells at 5 x 10(7)/ml were mixed with collagen type I to form mesenchymal stromal cell/polymer constructs. Mesenchymal stromal cells used for the control site were infected with adenovirus beta-Gal under the same conditions. After 6 weeks and 3 months, 10 miniature swine were euthanized and the cranium repair was examined. Near-complete repair of the critical-size cranial defect by tissue-engineered mesenchymal stromal cell/collagen type I construct was observed. The new bone formation area (in square centimeters) measured by three-dimensional computed tomography demonstrated that the improvement from 6 weeks to 3 months was significantly greater on the experimental side than on the control side (2.15 cm2 versus 0.54 cm2, p < 0.001) and significantly greater at 3 months than at 6 weeks (2.13 cm2 versus 0.52 cm2, p < 0.001). The difference between the experimental and control groups was significant at 3 months (mean difference, 2.13 cm2; p < 0.001). The maximal compressive strength of the new bone was similar to that of the normal cranial bone when evaluated by biomechanical testing (cranium bone versus tissue-engineered bone, 88.646 +/- 5.121 MPa versus 80.536 +/- 19.302 MPa; p = 0.227). Adenovirus was absent from all constructs by immunochemical staining at 6 weeks and 3 months after implantation. The successful repair of cranial defects in this experiment demonstrates the efficacy of the integration of the autologous stem cell concept, gene medicine, and polymers in producing tissue-engineered bone.     

Enhancement of bone formation by genetically-engineered bone marrow stromal cells expressing BMP-2, VEGF and angiopoietin-1

To explore the potential of combined delivery of osteogenic and angiogenic factors to bone marrow stromal cells (BMSCs) for repair of critical-size bone defects, we followed the formation of bone and vessels in tissue-engineered constructs in nude mice and rabbit bone defects upon introducing different combinations of BMP-2, vascular endothelial growth factor (VEGF) and angiopoietin-1 (Ang-1) to BMSCs with adenoviral vectors. Better osteogenesis and angiogenesis were found in co-delivery group of BMP-2, VEGF and angiopoietin-1 than any other combination of these factors in both animal models, indicating combined gene delivery of angiopoietin-1 and VEGF165 into a tissue-engineered construct produces an additive effect on BMP-2-induced osteogenesis.     

表面改性双相陶瓷复合自体骨髓干细胞修复兔骨缺损的实验研究

目的:应用自体骨髓基质干细胞(Bone Marrow Stromal Cells,BMSCs)复合经低晶态羟基磷灰石(Low Crystalline Hydroxyap- atite,LcHA)涂层的双相陶瓷(Biphasic Calcium Phosphate,BCP)构建的组织工程化骨(LcBCP)修复兔桡骨节段性缺损。方法:体外分离培养、诱导扩增兔BMSCs,取第三代细胞复合LcBCP(实验组)后修复15只兔左侧桡骨15mm缺损;右侧桡骨缺损处植入复合BMSCs的BCP(对照组),于植入后4、8和12周处死动物,通过大体形态、组织学、影像学和扫描电镜检测骨缺损修复效果。结果:BMSCs-LcBCP复合物生长良好,随时间延长,X线显示实验组连接处骨痂形成,对照组连接处始终愈合稍差,12周大体观察实验组骨修复良好,髓腔再通;组织学显示板层骨形成,连接处骨性愈合,实验对照组连接处虽然也为骨性愈合,但尚有较多编织骨形成。结论:自体BMSCs复合LcBCP形成的组织工程化骨可修复兔桡骨节段性缺损,低晶态羟基磷灰石涂层能够增强双相陶瓷的早期成骨。     

Placenta- versus bone-marrow-derived mesenchymal cells for the repair of segmental bone defects in a rabbit model

Tissue-engineered bones (TEBs) constructed with bone-marrow-derived mesenchymal stem cells (BMSCs) seeded on biomaterial scaffolds have achieved good results for bone defect repair in both animal experiments and clinical trials. This has been limited, however, by the source and quantity of BMSCs. We here explored TEBs constructed by placenta-derived mesenchymal stem cells (PMSCs) and compared their effect for the repair of critical-sized segmental osteoperiosteal defects with TEBs constructed with BMSCs. PMSCs were isolated from rabbit placenta by gradient centrifugation and in vitro monolayer culturing, and BMSCs were isolated from the hindlimb bone marrow of newborn rabbit. Primary cultured PMSCs and BMSCs were uniformly in a spindle shape. Immunocytochemistry indicated that both types of cells are positive for CD44 and CD105, and negative for CD34 and CD40L, confirming that they are mesenchymal stem cells. BrdU-labeled PMSCs and BMSCs were respectively co-cultured with bio-derived bone materials to construct TEBs in vitro. Critical-sized segmental osteoperiosteal defects of radii were created in 24 rabbits by surgery. The defects were repaired with TEBs constructed with PMSCs and BMSCs. The results showed that TEBs constructed by both PMSCs and BMSCs could repair the osteoperiosteal defects in a 'multipoint' manner. Measurement of radiography, histology, immunohistochemistry, alkaline phosphatase activity, osteocalcin assaying and biomechanical properties have found no significant difference between the two groups at 2, 4, 8 and 12 weeks after the transplantation (P > 0.05). Taken together, our results indicate that PMSCs have similar biological characteristics and osteogenic capacity to BMSCs and can be used as a new source of seeding cells for TEBs.     

Utility of tricalcium phosphate and osteogenic matrix cell sheet constructs for bone defect reconstruction

AIM: To determine the effects of transplanting osteogenic matrix cell sheets and beta-tricalcium phosphate (TCP) constructs on bone formation in bone defects.METHODS: Osteogenic matrix cell sheets were prepared from bone marrow stromal cells (BMSCs), and a porous TCP ceramic was used as a scaffold. Three experimental groups were prepared, comprised of TCP scaffolds (1) seeded with BMSCs; (2) wrapped with osteogenic matrix cell sheets; or (3) both. Constructs were implanted into a femoral defect model in rats and bone growth was evaluated by radiography, histology, biochemistry, and mechanical testing after 8 wk.RESULTS: In bone defects, constructs implanted with cell sheets showed callus formation with segmental or continuous bone formation at 8 wk, in contrast to TCP seeded with BMSCs, which resulted in bone non-union. Wrapping TCP constructs with osteogenic matrix cell sheets increased their osteogenic potential and resulting bone formation, compared with conventional bone tissue engineering TCP scaffolds seeded with BMSCs. The compressive stiffness (mean ± SD) values were 225.0 ± 95.7, 30.0 ± 11.5, and 26.3 ± 10.6 MPa for BMSC/TCP/Sheet constructs with continuous bone formation, BMSC/TCP/Sheet constructs with segmental bone formation, and BMSC/TCP constructs, respectively. The compressive stiffness of BMSC/TCP/Sheet constructs with continuous bone formation was significantly higher than those with segmental bone formation and BMSC/TCP constructs.CONCLUSION: This technique is an improvement over current methods, such as TCP substitution, and is useful for hard tissue reconstruction and inducing earlier bone union in defects.     

Biomimetic tubular nanofiber mesh and platelet rich plasma-mediated delivery of BMP-7 for large bone defect regeneration

There is a growing need for successful bone tissue engineering strategies and advanced biomaterials that mimic the structure and function of native tissues carry great promise. Successful bone repair approaches may include an osteoconductive scaffold, osteoinductive growth factors, cells with an osteogenic potential and capacity for graft vascularisation. To increase osteoinductivity of biomaterials, the local combination and delivery of growth factors has been developed. In the present study we investigated the osteogenic effects of calcium phosphate (CaP)-coated nanofiber mesh tube-mediated delivery of BMP-7 from a PRP matrix for the regeneration of critical sized segmental bone defects in a small animal model. Bilateral full-thickness diaphyseal segmental defects were created in twelve male Lewis rats and nanofiber mesh tubes were placed around the defect. Defects received either treatment with a CaP-coated nanofiber mesh tube (n?=?6), an un-coated nanofiber mesh tube (n=6) a CaP-coated nanofiber mesh tube with PRP (n=6) or a CaP-coated nanofiber mesh tube in combination with 5?μg?BMP-7 and PRP (n?=?6). After 12?weeks, bone volume and biomechanical properties were evaluated using radiography, microCT, biomechanical testing and histology. The results demonstrated significantly higher biomechanical properties and bone volume for the BMP group compared to the control groups. These results were supported by the histological evaluations, where BMP group showed the highest rate of bone regeneration within the defect. In conclusion, BMP-7 delivery via PRP enhanced functional bone defect regeneration, and together these data support the use of BMP-7 in the treatment of critical sized defects.     

Tissue-engineered bone regeneration

Bone lesions above a critical size become scarred rather than regenerated, leading to nonunion. We have attempted to obtain a greater degree of regeneration by using a resorbable scaffold with regeneration-competent cells to recreate an embryonic environment in injured adult tissues, and thus improve clinical outcome. We have used a combination of a coral scaffold with in vitro-expanded marrow stromal cells (MSC) to increase osteogenesis more than that obtained with the scaffold alone or the scaffold plus fresh bone marrow. The efficiency of the various combinations was assessed in a large segmental defect model in sheep. The tissue-engineered artificial bone underwent morphogenesis leading to complete recorticalization and the formation of a medullary canal with mature lamellar cortical bone in the most favorable cases. Clinical union never occurred when the defects were left empty or filled with the scaffold alone. In contrast, clinical union was obtained in three out of seven operated limbs when the defects were filled with the tissue-engineered bone.     

Repair of major cranio-orbital defects with an elastomer-coated mesh and autogenous bone paste.

We present a method for repairing defects in the craniofacial region in which an elastomer-coated mesh is used as a template with bone paste. The method was developed by animal experimentation first, and then successfully used in the maxillofacial and mandibular regions. We have used this method to repair 16 craniofacial defects with satisfactory results, and complications have been kept to a minimum.     

Fabrication of individual scaffolds based on a patient-specific alveolar bone defect model

Fabricating individualized tissue engineering scaffolds based on the three-dimensional shape of patient bone defects is required for the successful clinical application of bone tissue engineering. However, there are currently no reported studies of individualized bone tissue engineering scaffolds that truly reproduce a patient-specific bone defect. We fabricated individualized tissue engineering scaffolds based on alveolar bone defects. The individualized poly(lactide-co-glycolide) and tricalcium phosphate composite scaffolds were custom-made by acquiring the three-dimensional model through computed tomography, which was input into the computer-aided low-temperature deposition manufacturing system. The three-dimensional shape of the fabricated scaffold was identical to the patient-specific alveolar bone defects, with an average macropore diameter of 380 μm, micropore diameters ranging from 3 to 5 μm, and an average porosity of 87.4%. The mechanical properties of the scaffold were similar to adult cancellous bone. Scaffold biocompatibility was confirmed by attachment and proliferation of human bone marrow mesenchymal stem cells. Successful realization of individualized scaffold fabrication will enable clinical application of tissue-engineered bone at an early date.     

Differentiation of Rabbit Bone Mesenchymal Stem Cells into Endothelial Cells In Vitro and Promotion of Defective Bone Regeneration In Vivo

Tissue engineering strategies often fail to regenerate bones because of inadequate vascularization, especially in the reconstruction of large segmental bone defects. Large volumes of vascular endothelial cells (ECs) that functionally interact with osteoblasts during osteogenesis are difficult to obtain. In this study, we simulated bone healing by co-culturing differentiated ECs and mesenchymal stem cells (MSCs) either on a culture plate or on a polylactide glycolic acid (PLGA) scaffold in vitro. We also evaluated the effect of osteogenesis in repairing rabbit mandible defects in vivo. In this study, MSCs were separated from rabbit as the seed cells. After passage, the MSCs were cultured in an EC-conditioned medium to differentiate into ECs. Immunohistochemical staining analysis with CD34 showed that the induced cells had the characteristics of ECs and MSC. The induced ECs were co-cultured in vitro, and the induction of MSCs to osteoblast served as the control. Alkaline phosphatase (ALP) and alizarin red (AZR) staining experiments were performed, and the Coomassie brilliant blue total protein and ALP activity were measured. The MSCs proliferated and differentiated into osteoblast-like cells through direct contact between the derived ECs and MSCs. The co-cultured cells were seeded on PLGA scaffold to repair 1 cm mandible defects in the rabbit. The effectiveness of the repairs was assessed through soft X-ray and histological analyses. The main findings indicated that MSCs survived well on the scaffold and that the scaffold is biocompatible and noncytotoxic. The results demonstrated that the co-cultured MSC-derived ECs improved MSC osteogenesis and promoted new bone formation. This study may serve as a basis for the use of in vitro co-culturing techniques as an improvisation to bone tissue engineering for the repair of large bone defects.     

Naringin‐inlaid silk fibroin/hydroxyapatite scaffold enhances human umbilical cord‐derived mesenchymal stem cell‐based bone regeneration

ObjectivesLarge bone defects are a common, debilitating clinical condition that have substantial global health and economic burden. Bone tissue engineering technology has become one of the most promising approaches for regenerating defective bones. In this study, we fabricated a naringin‐inlaid composite silk fibroin/hydroxyapatite (NG/SF/HAp) scaffold to repair bone defects.Materials and MethodsThe salt‐leaching technology was used to fabricate the NG/SF/HAp scaffold. The cytocompatibility of the NG/SF/HAp scaffold was assessed using scanning electron microscopy, live/dead cell staining and phalloidin staining. The osteogenic and angiogenic properties were assessed in vitro and in vivo.ResultsThe porous NG/SF/HAp scaffold had a well‐designed biomimetic porous structure with osteoinductive and angiogenic activities. A gene microarray identified 854 differentially expressed genes between human umbilical cord‐derived mesenchymal stem cells (hUCMSCs) cultured on SF‐nHAp scaffolds and cells cultured on NG/SF/HAp scaffolds. The underlying osteoblastic mechanism was investigated using hUCMSCs in vitro. Naringin facilitated hUCMSC ingrowth into the SF/HAp scaffold and promoted osteogenic differentiation. The osteogenic and angiogenic capabilities of cells cultured in the NG/SF/HAp scaffold were superior to those of cells cultured in the SF/HAp scaffold.ConclusionsThe data indicate the potential of the SF/HAp composite scaffold incorporating naringin for bone regeneration.     

Segmental bone replacement via patient‐specific,three‐dimensional printed bioresorbable graft substitutes and their use as templates for the culture of mesenchymal stem cells under mechanical stimulation at various frequencies

The treatment of large segmental bone defects remains a challenge as infection, delayed union, and nonunion are common postoperative complications. A three‐dimensional printed bioresorbable and physiologically load‐sustaining graft substitute was developed to mimic native bone tissue for segmental bone repair. Fabricated from polylactic acid, this graft substitute is novel as it is readily customizable to accommodate the particular size and location of the segmental bone of the patient to be replaced. Inspired by the structure of the native bone tissue, the graft substitute exhibits a gradient in porosity and pore size in the radial direction and exhibit mechanical properties similar to those of the native bone tissue. The graft substitute can serve as a template for tissue constructs via seeding with stem cells. The biocompatibility of such templates was tested under in vitro conditions using a dynamic culture of human mesenchymal stem cells. The effects of the mechanical loading of cell‐seeded templates under in vitro conditions were assessed via subjecting the tissue constructs to 28 days of daily mechanical stimulation. The frequency of loading was found to have a significant effect on the rate of mineralization, as the alkaline phosphatase activity and calcium deposition were determined to be particularly high at the typical walking frequency of 2 Hz, suggesting that mechanical stimulation plays a significant role in facilitating the healing process of bone defects. Utilization of such patient‐specific and biocompatible graft substitutes, coupled with patient’s bone marrow cells seeded and exposed to mechanical stimulation of 2 Hz have the potential of reducing significant volumes of cadaveric tissue required, improving long‐term graft stability and incorporation, and alleviating financial burdens associated with delayed or failed fusions of long bone defects.     

Pulsed electromagnetic fields promote repair of focal articular cartilage defects with engineered osteochondral constructs

Articular cartilage injuries are a common source of joint pain and dysfunction. We hypothesized that pulsed electromagnetic fields (PEMFs) would improve growth and healing of tissue-engineered cartilage grafts in a direction-dependent manner. PEMF stimulation of engineered cartilage constructs was first evaluated in vitro using passaged adult canine chondrocytes embedded in an agarose hydrogel scaffold. PEMF coils oriented parallel to the articular surface induced superior repair stiffness compared to both perpendicular PEMF (p = .026) and control (p = .012). This was correlated with increased glycosaminoglycan deposition in both parallel and perpendicular PEMF orientations compared to control (p = .010 and .028, respectively). Following in vitro optimization, the potential clinical translation of PEMF was evaluated in a preliminary in vivo preclinical adult canine model. Engineered osteochondral constructs (∅ 6 mm × 6 mm thick, devitalized bone base) were cultured to maturity and implanted into focal defects created in the stifle (knee) joint. To assess expedited early repair, animals were assessed after a 3-month recovery period, with microfracture repairs serving as an additional clinical control. In vivo, PEMF led to a greater likelihood of normal chondrocyte (odds ratio [OR]: 2.5, p = .051) and proteoglycan (OR: 5.0, p = .013) histological scores in engineered constructs. Interestingly, engineered constructs outperformed microfracture in clinical scoring, regardless of PEMF treatment (p < .05). Overall, the studies provided evidence that PEMF stimulation enhanced engineered cartilage growth and repair, demonstrating a potential low-cost, low-risk, noninvasive treatment modality for expediting early cartilage repair.     

In Vivo Evaluation of a Novel Oriented Scaffold-BMSC Construct for Enhancing Full-Thickness Articular Cartilage Repair in a Rabbit Model

Tissue engineering (TE) has been proven usefulness in cartilage defect repair. For effective cartilage repair, the structural orientation of the cartilage scaffold should mimic that of native articular cartilage, as this orientation is closely linked to cartilage mechanical functions. Using thermal-induced phase separation (TIPS) technology, we have fabricated an oriented cartilage extracellular matrix (ECM)-derived scaffold with a Young''s modulus value 3 times higher than that of a random scaffold. In this study, we test the effectiveness of bone mesenchymal stem cell (BMSC)-scaffold constructs (cell-oriented and random) in repairing full-thickness articular cartilage defects in rabbits. While histological and immunohistochemical analyses revealed efficient cartilage regeneration and cartilaginous matrix secretion at 6 and 12 weeks after transplantation in both groups, the biochemical properties (levels of DNA, GAG, and collagen) and biomechanical values in the oriented scaffold group were higher than that in random group at early time points after implantation. While these differences were not evident at 24 weeks, the biochemical and biomechanical properties of the regenerated cartilage in the oriented scaffold-BMSC construct group were similar to that of native cartilage. These results demonstrate that an oriented scaffold, in combination with differentiated BMSCs can successfully repair full-thickness articular cartilage defects in rabbits, and produce cartilage enhanced biomechanical properties.     

Engineering tubular bone constructs

Cell-sheet techniques have been proven effective in various soft tissue engineering applications. In this experiment, we investigated the feasibility of bone tissue engineering using a hybrid of mesenchymal stem cell (MSC) sheets and PLGA meshes. Porcine MSCs were cultured to a thin layer of cell sheets via osteogenic induction. Tube-like long bones were constructed by wrapping the cell sheet on to PLGA meshes resulting in constructs which could be cultured in spinner flasks, prior to implantation in nude rats. Our results showed that the sheets were composed of viable cells and dense matrix with a thickness of about 80-120 microm, mineral deposition was also observed in the sheet. In vitro cultures demonstrated calcified cartilage-like tissue formation and most PLGA meshes were absorbed during the 8-week culture period. In vivo experiments revealed that dense mineralized tissue was formed in subcutaneous sites and the 8-week plants shared similar micro-CT characteristics with native bone. The neo tissue demonstrated histological markers for both bone and cartilage, indicating that the bone formation pathway in constructs was akin to endochondral ossification, with the residues of PLGA having an effect on the neo tissue organization and formation. These results indicate that cell-sheet approaches in combination with custom-shaped scaffolds have potential in producing bone tissue.     

Segmental bone defects: from cellular and molecular pathways to the development of novel biological treatments

Several conditions in clinical orthopaedic practice can lead to the development of a diaphyseal segmental bone defect, which cannot heal without intervention. Segmental bone defects have been traditionally treated with bone grafting and/or distraction osteogenesis, methods that have many advantages, but also major drawbacks, such as limited availability, risk of disease transmission and prolonged treatment. In order to overcome such limitations, biological treatments have been developed based on specific pathways of bone physiology and healing. Bone tissue engineering is a dynamic field of research, combining osteogenic cells, osteoinductive factors, such as bone morphogenetic proteins, and scaffolds with osteoconductive and osteoinductive attributes, to produce constructs that could be used as bone graft substitutes for the treatment of segmental bone defects. Scaffolds are usually made of ceramic or polymeric biomaterials, or combinations of both in composite materials. The purpose of the present review is to discuss in detail the molecular and cellular basis for the development of bone tissue engineering constructs.     

Repair of bone defect of the lateral forefoot by double segment triangular fibula flap with vascular pedicle: A case report

Objective: To expound the clinical effect of a new operation by transplanting double segment triangular fibula flap with vascular pedicle to repair the forefoot with lateral bone defect, and to study how to improve the operation method in the following stage. Methods: The inclusion criteria: More than 2 phalangeal and metatarsal bones defects of the lateral forefoot, widespread skin and soft tissue defects on pelma and dorsal foot, and destruction of the anterior aspect of foot arch, which seriously affects the foot function. There was one case of clinical application in November 2014. The repairing method is as followed: the harvested vascularized free fibula was cut into 2 segments and then they were folded into a right angle. According to selected control points on the residual metatarsals, an optimal stereo triangular net was constructed. Meanwhile, according to flow-through mode, the free anterolateral thigh flap was incorporated to repair the forefoot and foot arch. Results: Postoperative bone flaps all survived. After a 17-month following up, it was found that the grafted fibular healed well, shape of the foot was good, weight-bearing walking was practical, a slight limp and discomfort with plantar pain existed, sensory recovery reached S3 level and functional recovery of weight-bearing walking by forefoot reached W3 level, comprehensive evaluation was good, and there were wear scar and ulcer on the plantar flap during long-time walking for patients, such results were excellent according to foot function scoring criteria. Conclusion: In this operation the grafted fibula was fold into a triangle according to actual need, which though not completely restores the tridimensional structure of the longitudinal, transverse arches of the lateral foot makes weight-bearing walking possible, besides, its appearance and function is satisfactory. Such an operation has overcome the shortage of non-tridimensional structure of the transverse arch etc. in traditional operations and it should be an ideal operation in repairing serious defects on the lateral forefoot through further improvement.     

Effects of combined hydroxyapatite and human platelet rich plasma on bone healing in rabbit model: radiological, macroscopical, hidtopathological and biomechanical evaluation

Hydroxyapatite is an osteoconductive material used as a bone graft extender and exhibits excellent biocompatibility with soft tissues such as skin, muscle and gums, making it an ideal candidate for orthopedic and dental implants or components of implants. Synthetic hydroxyapatite has been widely used in repair of hard tissues, and common uses include bone repair, bone augmentation, as well as coating of implants or acting as fillers in bone or teeth. On the other hand, human platelet rich plasma (hPRP) has been used as a source of osteoinductive factor. A combination of hPRP and hydroxyapatite is expected to create a composite with both osteoconductive and osteoinductive properties. This study examined the effect of a combination of hydroxyapatite and hPRP on osteogenesis in vivo, using rabbit model bone healing. A critical size defect of 10?mm long was created in the radial diaphysis of 36 rabbit and either supplied with hydroxyapatite-human PRP or hydroxyapatite or was left empty (control group). Radiographs of each forelimb were taken postoperatively on 1st day and then at the 2nd, 4th, 6th and 8th weeks post injury to evaluate bone formation, union and remodeling of the defect. The operated radiuses of half of the animals in each group were removed on 56th postoperative day and were grossly and histopathologically evaluated. In addition, biomechanical test was conducted on the operated and normal forearms of the other half of the animals of each group. This study demonstrated that hydroxyapatite-humanPRP, could promote bone regeneration in critical size defects with a high regenerative capacity. The results of the present study demonstrated that hydroxyapatite-hPRP could be an attractive alternative for reconstruction of the major diaphyseal defects of the long bones in animal models.