Single-nucleotide-polymorphism genotyping for whole-genome-amplified samples using automated fluorescence correlation spectroscopy

Whole-genome amplification (WGA) methods were adopted for single-nucleotide-polymorphism (SNP) typing to minimize the amount of genomic DNA that has to be used in typing for thousands of different SNPs in large-scale studies; 5-10 ng of genomic DNA was amplified by a WGA method (improved primer-extension-preamplification-polymerase chain reaction (I-PEP-PCR), degenerated oligonucleotide primer-PCR (DOP-PCR), or multiple displacement amplification (MDA)). Using 1/100 to 1/500 amounts of the whole-genome-amplified products as templates, subsequent analyses were successfully performed. SNPs were genotyped by the sequence-specific primer (SSP)-PCR method followed by fluorescence correlation spectroscopy (FCS). The typing results were evaluated for four different SNPs on tumor necrosis factor receptor 1 and 2 genes (TNFR1 and TNFR2). The genotypes determined by the SSP-FCS method using the WGA products were 100% in concordance with those determined by nucleotide sequencing using genomic DNAs. We have already carried out typing of more than 300 different SNPs and are currently performing 7,500-10,000 typings per day using WGA samples from patients with several common diseases. WGA coupled with FCS allows specific and high-throughput genotyping of thousands of samples for thousands of different SNPs.     

Multiple displacement amplification prior to single nucleotide polymorphism genotyping in epidemiologic studies

We assessed the whole genome amplification strategy, known as multiple displacement amplification (MDA), for use with the TaqMan genotyping platform for DNA samples derived from two case-control studies nested in the Nurses' Health Study and the Physicians' Health Study. Our objectives were to (1) quantify DNA yield from samples of varying starting concentrations and (2) assess whether MDA products give an accurate representation of the original genomic sequence. Multiple displacement amplification yielded a mean 23000-fold increase in DNA quantity and genotyping results demonstrate 99.95% accuracy across six SNPs from four genes for 352 samples included in this study. These results suggest that MDA will provide a sufficiently robust amplification of limiting samples of genomic DNA that can be used for SNP genotyping in large case-control studies of complex diseases.     

Whole-genome amplification-based GenomiPhi for multiple genomic analysis of individual early porcine embryos

The multiple displacement amplification (MDA) method, which relies on isothermal DNA amplification using the DNA polymerase of the bacteriophage phi29, was recently developed for high-performance, whole-genome amplification (WGA). The objective of the present study was to determine whether a target sequence could be successfully amplified by conventional PCR when the genomic DNA of a single Day-7 porcine blastocyst (derived from SCNT of a gene-engineered fibroblast) was amplified by the MDA method and used as a template. The yield of double-stranded DNA was 103.5 ± 16.0 ng/embryo (range, 75-125), as assessed by a PocoGreen assay. However, non-specific products (20 ± 5 ng/tube) were also generated, even in the negative control. Thus, ∼81% of the 103.5 ng (84 ng) of amplified DNA was estimated to be porcine sequences (2.2 × 10³-fold enrichment). In addition, PCR confirmed the presence of transgenes, as well as endogenous α-1,3-galactosyltransferase and homeobox Nanog genes in all embryos. Sequencing of the amplified products verified the fidelity of this system. In conclusion, the MDA-mediated WGA, which was simple, inexpensive, and did not require a thermal cycler, could be a powerful tool for multiple genomic analyses of individual early porcine embryos.     

High fidelity of whole-genome amplified DNA on high-density single nucleotide polymorphism arrays

Current microarray technology allows researchers to genotype a large number of SNPs with relatively small amounts of DNA. Nevertheless, researchers and clinicians still frequently face the problem of acquiring enough high-quality DNA for analysis. Whole-genome amplification (WGA) methods offer a solution for this problem, and earlier studies have shown that WGA samples perform reasonably well in small-scale genetic analyses (e.g. Affymetrix 10K array). To determine the performance of WGA products on a large-scale genotyping array, we compared the Affymetrix 250K array genotyping results of genomic DNA and their WGA products from four individuals. Our results indicate that WGA product performs well on the 250K array compared to genomic DNA, especially when using the BRLMM calling algorithm. WGA samples have high call rates (97.5% on average, compared to 99.4% for genomic DNA) and excellent concordance rates with their corresponding genomic DNA samples (98.7% on average). In addition, no apparent systematic genomic amplification bias can be detected. This study demonstrates that, although there is a slight decrease in the total call rates, WGA methods provide a reliable approach for increasing the amount of DNA samples for use with a common SNP genotyping array.     

Whole genome amplification from filamentous fungi using Phi29-mediated multiple displacement amplification

The availability of genomic DNA of sufficient quality and quantity is fundamental to molecular genetic analysis. Many filamentous fungi are slow growing or even unculturable and current DNA isolation methods are often unsatisfactory. We have used multiple displacement amplification (MDA) to amplify whole genomes for two fungal species, Penicillium paxilli and the slow growing endophyte of grasses Epichloe festucae. Up to 10 microg of high molecular weight DNA was routinely amplified from less than 10 ng of template DNA obtained using glass bead-mediated disruption of fungal spores or alkaline lysis of mycelium. PCR was possible from MDA-generated DNA and amplicons up to 10 kb were successfully amplified. RFLP analysis was successful, with bands of up to 5 kb routinely detected. Hybridization of MDA-amplified DNA to a cosmid library illustrated that the MDA product amplified from E. festucae is representative of the genome. MDA is a reliable method that could be applied to applications ranging from high-throughput screening of deletion mutants to genomic library construction.     

Quantitative evaluation by minisequencing and microarrays reveals accurate multiplexed SNP genotyping of whole genome amplified DNA

Whole genome amplification (WGA) procedures such as primer extension preamplification (PEP) or multiple displacement amplification (MDA) have the potential to provide an unlimited source of DNA for large-scale genetic studies. We have performed a quantitative evaluation of PEP and MDA for genotyping single nucleotide polymorphisms (SNPs) using multiplex, four-color fluorescent minisequencing in a microarray format. Forty-five SNPs were genotyped and the WGA methods were evaluated with respect to genotyping success, signal-to-noise ratios, power of genotype discrimination, yield and imbalanced amplification of alleles in the MDA product. Both PEP and MDA products provided genotyping results with a high concordance to genomic DNA. For PEP products the power of genotype discrimination was lower than for MDA due to a 2-fold lower signal-to-noise ratio. MDA products were indistinguishable from genomic DNA in all aspects studied. To obtain faithful representation of the SNP alleles at least 0.3 ng DNA should be used per MDA reaction. We conclude that the use of WGA, and MDA in particular, is a highly promising procedure for producing DNA in sufficient amounts even for genome wide SNP mapping studies.     

Monodisperse Picoliter Droplets for Low-Bias and Contamination-Free Reactions in Single-Cell Whole Genome Amplification

Whole genome amplification (WGA) is essential for obtaining genome sequences from single bacterial cells because the quantity of template DNA contained in a single cell is very low. Multiple displacement amplification (MDA), using Phi29 DNA polymerase and random primers, is the most widely used method for single-cell WGA. However, single-cell MDA usually results in uneven genome coverage because of amplification bias, background amplification of contaminating DNA, and formation of chimeras by linking of non-contiguous chromosomal regions. Here, we present a novel MDA method, termed droplet MDA, that minimizes amplification bias and amplification of contaminants by using picoliter-sized droplets for compartmentalized WGA reactions. Extracted DNA fragments from a lysed cell in MDA mixture are divided into 10⁵ droplets (67 pL) within minutes via flow through simple microfluidic channels. Compartmentalized genome fragments can be individually amplified in these droplets without the risk of encounter with reagent-borne or environmental contaminants. Following quality assessment of WGA products from single Escherichia coli cells, we showed that droplet MDA minimized unexpected amplification and improved the percentage of genome recovery from 59% to 89%. Our results demonstrate that microfluidic-generated droplets show potential as an efficient tool for effective amplification of low-input DNA for single-cell genomics and greatly reduce the cost and labor investment required for determination of nearly complete genome sequences of uncultured bacteria from environmental samples.     

New Perspectives on Microbial Community Distortion after Whole-Genome Amplification

Whole-genome amplification (WGA) has become an important tool to explore the genomic information of microorganisms in an environmental sample with limited biomass, however potential selective biases during the amplification processes are poorly understood. Here, we describe the effects of WGA on 31 different microbial communities from five biotopes that also included low-biomass samples from drinking water and groundwater. Our findings provide evidence that microbiome segregation by biotope was possible despite WGA treatment. Nevertheless, samples from different biotopes revealed different levels of distortion, with genomic GC content significantly correlated with WGA perturbation. Certain phylogenetic clades revealed a homogenous trend across various sample types, for instance Alpha- and Betaproteobacteria showed a decrease in their abundance after WGA treatment. On the other hand, Enterobacteriaceae, an important biomarker group for fecal contamination in groundwater and drinking water, were strongly affected by WGA treatment without a predictable pattern. These novel results describe the impact of WGA on low-biomass samples and may highlight issues to be aware of when designing future metagenomic studies that necessitate preceding WGA treatment.     

Extracting DNA from museum bird eggs, and whole genome amplification of archive DNA

We present a comprehensive protocol for extracting DNA from egg membranes and other internal debris recovered from the interior of blown museum bird eggs. A variety of commercially available DNA extraction methods were found to be applicable. DNA sequencing of polymerase chain reaction (PCR) products for a 176‐bp fragment of mitochondrial DNA was successful for most egg samples (> 78%) even though the amount of DNA extracted (mean = 14.71 ± 4.55 ng/µL) was significantly less than that obtained for bird skin samples (mean = 67.88 ± 4.77 ng/µL). For PCR and sequencing of snipe (Gallinago) DNA, we provide eight new primers for the ‘DNA barcode’ region of COI mtDNA. In various combinations, the primers target a range of PCR products sized from 72 bp to the full ‘barcode’ of 751 bp. Not all possible combinations were tested with archive snipe DNA, but we found a significantly better success rate of PCR amplification for a shorter 176‐bp target compared with a larger 288‐bp fragment (67% vs. 39%). Finally, we explored the feasibility of whole genome amplification (WGA) for extending the use of archive DNA in PCR and sequencing applications. Of two WGA approaches, a PCR‐based method was found to be able to amplify whole genomic DNA from archive skins and eggs from museum bird collections. After WGA, significantly more archive egg samples produced visible PCR products on agarose (56.9% before WGA vs. 79.0% after WGA). However, overall sequencing success did not improve significantly (78.8% compared with 83.0%).     

Evaluation of multiple displacement amplification in a 5 cM STR genome-wide scan

Multiple displacement amplification (MDA) has emerged as a promising new method of whole genome amplification (WGA) with the potential to generate virtually unlimited genome-equivalent DNA from only a small amount of seed DNA. To date, genome-wide high marker density assessments of MDA–DNA have focussed mainly upon suitability for single nucleotide polymorphism (SNP) genotyping applications. Suitability for short tandem repeat (STR) genotyping has not been investigated in great detail, despite their inherent instability during DNA replication, and the obvious challenge that this presents to WGA techniques. Here, we aimed to assess the applicability of MDA in STR genotyping by conducting a genome-wide scan of 768 STR markers for MDAs of 15 high quality genomic DNAs. We found that MDA genotyping call and accuracy rates were only marginally lower than for genomic DNA. Pooling of three replicate MDAs resulted in a small increase in both call rate and genotyping accuracy. We identified 34 STRs (4.4% of total markers) of which five essentially failed with MDA samples, and 29 of which showed elevated genotyping failures/discrepancies in the MDAs. We emphasise the importance of DNA and MDA quality checks, and the use of appropriate controls to identify problematic STR markers.     

A test of the efficacy of whole‐genome amplification on DNA obtained from low‐yield samples

Conservation and population genetic studies are sometimes hampered by insufficient quantities of high quality DNA. One potential way to overcome this problem is through the use of whole genome amplification (WGA) kits. We performed rolling circle WGA on DNA obtained from matched hair and tissue samples of North American red squirrels (Tamiasciurus hudsonicus). Following polymerase chain reaction (PCR) at four microsatellite loci, we compared genotyping success for DNA from different source tissues, both pre‐ and post‐WGA. Genotypes obtained with tissue were robust, whether or not DNA had been subjected to WGA. DNA extracted from hair produced results that were largely concordant with matched tissue samples, although amplification success was reduced and some allelic dropout was observed. WGA of hair samples resulted in a low genotyping success rate and an unacceptably high rate of allelic dropout and genotyping error. The problem was not rectified by conducting PCR of WGA hair samples in triplicate. Therefore, we conclude that WGA is only an effective method of enhancing template DNA quantity when the initial sample is from high‐yield material.     

Balanced-PCR amplification allows unbiased identification of genomic copy changes in minute cell and tissue samples

Analysis of genomic DNA derived from cells and fresh or fixed tissues often requires whole genome amplification prior to microarray screening. Technical hurdles to this process are the introduction of amplification bias and/or the inhibitory effects of formalin fixation on DNA amplification. Here we demonstrate a balanced-PCR procedure that allows unbiased amplification of genomic DNA from fresh or modestly degraded paraffin-embedded DNA samples. Following digestion and ligation of a target and a control genome with distinct linkers, the two are mixed and amplified in a single PCR, thereby avoiding biases associated with PCR saturation and impurities. We demonstrate genome-wide retention of allelic differences following balanced-PCR amplification of DNA from breast cancer and normal human cells and genomic profiling by array-CGH (cDNA arrays, 100 kb resolution) and by real-time PCR (single gene resolution). Comparison of balanced-PCR with multiple displacement amplification (MDA) demonstrates equivalent performance between the two when intact genomic DNA is used. When DNA from paraffin-embedded samples is used, balanced PCR overcomes problems associated with modest DNA degradation and produces unbiased amplification whereas MDA does not. Balanced-PCR allows amplification and recovery of modestly degraded genomic DNA for subsequent retrospective analysis of human tumors with known outcomes.     

Whole genome amplification of sodium bisulfite-treated DNA allows the accurate estimate of methylated cytosine density in limited DNA resources

Sodium bisulfite modification-based fine mapping of methylated cytosines represents the gold standard technique for DNA methylation studies. A major problem with this approach, however is that it results in considerable DNA degradation, and large quantities of genomic DNA material are needed if numerous genomic regions are to be profiled. In this study, we examined whether whole genome amplification (WGA) techniques can be applied to sodium bisulfite-treated DNA and whether WGA would bias DNA methylation results. Sodium bisulfite-treated DNA was amplified using a standard WGA method: optimized primer-extension preamplification (PEP) with degenerate primers. Following the PCR of bisulfite-treated DNA, the DNA methylation profiles of specific DNA fragments were assessed using three approaches: (i) direct sequencing of the overall product; (ii) the sequencing of cloned PCR products; and (iii) methylation-sensitive single nucleotide primer extension (MS-SNuPE)--and compared with those obtained from bisulfite-treated DNA not subjected to WGA. Our data indicates that the DNA methylation profiles obtained from WGA of sodium bisulfite-treated DNA are consistent with those obtained from non-WGA DNA. The average difference in methylation percentage calculated from the two sets of template using MS-SNuPE was 4%. If our results are replicated on other genomic loci, WGA may become a useful technique in DNA methylation studies.     

Whole-genome multiple displacement amplification from single cells

Multiple displacement amplification (MDA) is a recently described method of whole-genome amplification (WGA) that has proven efficient in the amplification of small amounts of DNA, including DNA from single cells. Compared with PCR-based WGA methods, MDA generates DNA with a higher molecular weight and shows better genome coverage. This protocol was developed for preimplantation genetic diagnosis, and details a method for performing single-cell MDA using the phi29 DNA polymerase. It can also be useful for the amplification of other minute quantities of DNA, such as from forensic material or microdissected tissue. The protocol includes the collection and lysis of single cells, and all materials and steps involved in the MDA reaction. The whole procedure takes 3 h and generates 1-2 microg of DNA from a single cell, which is suitable for multiple downstream applications, such as sequencing, short tandem repeat analysis or array comparative genomic hybridization.     

One multiplex control for 29 cystic fibrosis mutations

A simple approach is described to synthesize and clone an inexhaustible supply of any homozygous and/or heterozygous controls diluted with yeast genomic DNA to mimic human genome equivalents for use throughout the entire multiplex mutation assay. As a proof of principle, the 25 cystic fibrosis mutation panel selected by the American College of Medical Genetics and four additional mutant sequences were prepared as a single control mixture. The 29 CFTR mutations were incorporated into 17 gene fragments by PCR amplification of targeted sequences using mutagenic primers on normal human genomic DNA template. Flanking primers selected to bind beyond all published PCR primer sites amplified controls for most assay platforms. The 17 synthesized 433-933-bp CFTR fragments each with one to four homozygous mutant sequences were cloned into nine plasmid vectors at the multiple cloning site and bidirectionally sequenced. Miniplasmid preps from these nine clones were mixed and diluted with genomic yeast DNA to mimic the final nucleotide molar ratio of two CFTR genes in 6 x 10(9) bp total human genomic DNA. This mixture was added to control PCR reactions prior to amplification as the only positive control sample. In this fashion >200 multiplex clinical PCR analyses of >4,000 clinical patient samples have been controlled simultaneously for PCR amplification and substrate specificity for 29 tested mutations without cross contamination. This clinically validated multiplex cystic fibrosis control can be modified readily for different test formats and provides a robust means to control for all mutations instead of rotating human genomic controls each with a fraction of the mutations. This approach allows scores of additional mutation controls from any gene loci to be added to the same mixture annually.     

High accuracy genotyping directly from genomic DNA using a rolling circle amplification based assay

Background

Rolling circle amplification of ligated probes is a simple and sensitive means for genotyping directly from genomic DNA. SNPs and mutations are interrogated with open circle probes (OCP) that can be circularized by DNA ligase when the probe matches the genotype. An amplified detection signal is generated by exponential rolling circle amplification (ERCA) of the circularized probe. The low cost and scalability of ligation/ERCA genotyping makes it ideally suited for automated, high throughput methods.

Results

A retrospective study using human genomic DNA samples of known genotype was performed for four different clinically relevant mutations: Factor V Leiden, Factor II prothrombin, and two hemochromatosis mutations, C282Y and H63D. Greater than 99% accuracy was obtained genotyping genomic DNA samples from hundreds of different individuals. The combined process of ligation/ERCA was performed in a single tube and produced fluorescent signal directly from genomic DNA in less than an hour. In each assay, the probes for both normal and mutant alleles were combined in a single reaction. Multiple ERCA primers combined with a quenched-peptide nucleic acid (Q-PNA) fluorescent detection system greatly accellerated the appearance of signal. Probes designed with hairpin structures reduced misamplification. Genotyping accuracy was identical from either purified genomic DNA or genomic DNA generated using whole genome amplification (WGA). Fluorescent signal output was measured in real time and as an end point.

Conclusions

Combining the optimal elements for ligation/ERCA genotyping has resulted in a highly accurate single tube assay for genotyping directly from genomic DNA samples. Accuracy exceeded 99 % for four probe sets targeting clinically relevant mutations. No genotypes were called incorrectly using either genomic DNA or whole genome amplified sample.     

Whole genome amplification on DNA from filter paper blood spot samples: an evaluation of selected systems

As the number of single-nucleotide polymorphism (SNP) screening and other mutation scanning studies have increased explosively, following the development of high-throughput instrumentation, it becomes even more important to have sufficient template DNA. The source of DNA is often limited, especially in epidemiological studies, which require many samples as well as enough DNA to perform numerous SNP screenings or mutation scannings. Therefore, the aim is to solve the problem of stock DNA limitation. This need has been an important reason for the development of whole genome amplification (WGA) methods. Several systems are based on Phi29 polymerase multiple displacement amplification (MDA) or on DNA fragmentation (OmniPlex). Using TaqMan SNP genotyping assays, we have tested four WGA systems -- AmpliQ Genomic Amplifier Kit, GenomiPhi, Repli-g, and GenomePlex -- on DNA extracted from Guthrie cards to evaluate the amplification bias, concordance- and call rates, cost efficiency, and flexibility. All systems successfully amplified picograms of DNA from Guthrie cards to micrograms of product without loss of heterozygosity and with minimal allelic bias. A modified AmpliQ set up was chosen for further evaluation. In all, 2,000 SNP genotyping results from amplified and nonamplified samples were compared and the concordance rates between the samples were 99.7%. The call rate using the TaqMan system was 99.8%. DNA extracted from Guthrie cards and amplified with one of the four evaluated WGA systems is applicable in epidemiological genetic screenings. System choice should be based on requirements for system flexibility, product yield, and use in subsequent analysis.     

Comparison of sample preparation methods for ChIP-chip assays

A single chromatin immunoprecipitation (ChIP) sample does not provide enough DNA for hybridization to a genomic tiling array. A commonly used technique for amplifying the DNA obtained from ChIP assays is ligation-mediated PCR (LM-PCR). However; using this amplification method, we could not identify Oct4 binding sites on genomic tiling arrays representing 1% of the human genome (ENCODE arrays). In contrast, hybridization of a pool of 10 ChIP samples to the arrays produced reproducible binding patterns and low background signals. However the pooling method would greatly increase the number of ChIP reactions needed to analyze the entire human genome. Therefore, we have adapted the GenomePlex whole genome amplification (WGA) method for use in ChIP-chip assays; detailed ChIP and amplification protocols used for these analyses are provided as supplementary material. When applied to ENCODE arrays, the products prepared using this new method resulted in an Oct4 binding pattern similar to that from the pooled Oct4 ChIP samples. Importantly, the signal-to-noise ratio using the GenomePlex WGA method is superior to the LM-PCR amplification method.     

Whole genome amplification of buccal cytobrush DNA collected for molecular epidemiology studies.

When cytobrush buccal cell samples have been collected as a genomic DNA (gDNA) source for an epidemiological study, whole genome amplification (WGA) can be critical to maintain sufficient DNA for genotyping. We evaluated REPLI-g WGA using gDNA from two paired cytobrushes (cytobush 'A' kept in a cell lysis buffer, and 'B' dried and kept at room temperature for 3 days, and frozen until DNA extraction) in a pilot study (n=21), and from 144 samples collected by mail in a breast cancer study. WGA success was assessed as the per cent completion/concordance of STR/SNP genotypes. Locus amplification bias was assessed using quantitative PCR of 23 human loci. The pilot study showed > 98% completion but low genotype concordance between cytobrush wgaDNA and paired blood gDNA (82% and 84% for cytobrushes A and B, respectively). Substantial amplification bias was observed with significantly lower human gDNA amplification from cytobrush B than A. Using cytobrush gDNA samples from the breast cancer study (n =20), an independent laboratory demonstrated that increasing template gDNA to the REPLI-g reaction improved genotype performance for 49 SNPs; however, average completion and concordance remained below 90%. To reduce genotype misclassification when cytobrush wgaDNA is used, inclusion of paired gDNA/wgaDNA and/or duplicate wgaDNA samples is critical to monitor data quality.